Beli Mesin Akhir bekas (76.115)

Kondisi: baik (bekas), 1 x deburring machine Vollma JK WS 25 Fsdeiz Dc Rjpfx Am Seph Particularly suitable for removing cut-off burrs from turned parts. The machine can be inspected under power at our warehouse in Reichenbach.

Kondisi: bekas, Tahun pembuatan: 2004, Double-end profiler and jamb machining automatic for window and door production Working width: 4000 mm 3 units on each side 1 x saw/chipper 2 x milling spindles – spindle stroke 800 mm! Jamb machining automatic with 16 spindles Line-controlled Numerous spare parts included Fpedpfsdfx Hcex Am Soh Further data available on request Note on used machines: • Errors in technical specifications and prior sale excepted. • Stated prices are ex works – free loading! • The machine has been cleaned and function-tested. • All machines are sold as viewed, without any warranty or guarantee claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Kondisi: bekas, Tahun pembuatan: 2008, Technical details: Workpiece diameter – max.: 29 mm Workpiece diameter – min.: 26 mm Fpsdpslqac Sefx Am Seh Workpiece length: 66 mm The system was originally supplied for the following workpiece sizes: Diameter 26mm – 29mm Length 65mm – 66mm By using interchangeable parts in the clamping device, handling unit, etc., diameters of up to approx. Ø50mm and total lengths of up to roughly 400mm should be possible with some modifications. This is also dependent on tool lengths, machining lengths on the component, etc.

Tahun pembuatan: 2011, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, MACHINING CAPACITIES: - Height (thickness): 30 to 390 mm - Maximum workpiece width: 400 mm - Abrasive belt speed: 1300 m/min - Conveyor feed speed: 10 m/min - Belt size: 420x1800 mm (please consult us for supply) MACHINE COMPONENTS: - Roller table, bottom-side belt operation Table height from floor: 90 cm - Automatic workpiece detection via sensor - Pneumatic pressure sanding pad - Automatic belt directional change MACHINE SPECIFICATIONS: - Main power supply: 400V, three-phase, 50Hz, IN 22 A (35A protection) - Automatic star-delta starter - Ammeter(s) for power consumption monitoring Feed motor: 0.5 kW Belt motor: 7.5 kW - Pneumatic tensioning, oscillation, and lifting of rollers - Pneumatic supply: 6 to 8 bar - Extraction: 2 lower ports, Ø150 mm each Recommended flow rate: 2200 m³/h Speed: 20 m/sec Fjdpjx A Unxjfx Am Sjph - CE marking, emergency stops front/rear, padlockable main switch Note: For optimal operation, always release belt tension when the machine is not in use, and avoid any moisture including dew point condensation inside your facility during winter. Footprint: 1500x1300x2050 h.mm Weight: 1200 kg

Tahun pembuatan: 1987, Kondisi: baik (bekas), for cutter diameter up to max.: 300 mm Saw stroke manually adjustable: 550 mm Manual feed via spindle: 150 mm Height adjustment via spindle (manual): approx. 130 mm Table semi-circle diameter: 500 mm Saw blade drive: 380 V, 2.2 kW Saw blade speed: 2700 rpm Required space approx.: 1000 x 900 x 1300 mm Fedpfoghl Emex Am Sjph Weight approx.: 100 kg

Tahun pembuatan: 1972, Kondisi: bekas, This machine is available 3 times. Specifications: Manufacturer: Landis Type: FRM 50 E-8 Year of manufacture: 1972 Fjdpeg Umitefx Am Soph Tailstock stroke: approx. 100 mm Distance between spindles in retracted state: approx. 550 mm Max. workpiece diameter: 75 mm Travel per unit: 200 mm Drive power: - 8.5 kW / 750 rpm - 12 kW / 1450 rpm - 18 kW / 2960 rpm Note: The machine is set up for diameter 20 mm and 65 mm length Accessories: with magazine

Tahun pembuatan: 2004, Kondisi: baik (bekas), nomor mesin/kendaraan: 2004-3-11A, - Manual feed of the milling unit Fpedpfx Ajf E Higsm Ssh - Working table height adjustable via handwheel - Horizontal and vertical material clamping - Cutter diameter up to 250 mm - Max. milling height: 150 mm - Max. milling depth: 80 mm - Max. milling length: 305 mm - Angle-adjustable fence left/right: 20° - 90° - Milling spindle speed: 4500 rpm - Drive: 400 V, 3.2 kW - Compressed air connection: 6 - 8 bar - Air consumption per working cycle: 10 l - Pneumatic profile clamping - Table base frame - Required space approx. W 1100 x H 1300 x D 700 mm - Weight approx. 200 kg

Kondisi: baik (bekas), Tahun pembuatan: 2009, nomor mesin/kendaraan: 9155, Offer 24245 Technical specifications: - Pneumatic feed of the milling unit - Height-adjustable worktable by handwheel - Horizontal and vertical material clamping - Cutter diameter up to 300 mm - Max. profile height: 190 mm - Max. milling depth: 110 mm - Max. milling length: 400 mm - Angle-adjustable fence, left & right: 20° – 90° – 20° - Milling spindle speed: 2,800 rpm - Drive: 400 V / 2.2 kW - Compressed air connection: 6 – 8 bar - Air consumption per cycle: approx. 10 l - ELGO digital readout for cross stop - Pneumatic profile clamping - Spray unit Fpedpfetq Takjx Am Soh - Required space (approx.): W 1100 x H 1500 x D 700 mm - Weight (approx.): 300 kg

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, en-001 Fsdpexb Ucaofx Am Seph

Kondisi: bekas, Tahun pembuatan: 1988, nomor mesin/kendaraan: 50531, End sheet tipping machine Hunkeler VEA 400, year 1988 – serial no. 50531/10 Minimum size 100x70mm – maximum size 420x310mm Production speed: 1,200–6,800 cycles/hour Online video inspection possible via Skype We would be pleased to welcome you for a visit – numerous additional machines in stock Available immediately – inspection possible Fsdpfsh Axf Uox Am Seph Located in Emskirchen / Nuremberg – test runs possible

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Well-maintained machine from a screw factory - Horizontal end machining center for simultaneous double-sided end machining of shaft-shaped parts Fpjdpfx Amowt Upme Seh For further information, please inquire....

Kondisi: baru, Tahun pembuatan: 2024, berat benda kerja (maks.): 12 kg, • Weight approx. 11.8 kg • CNC-manufactured from A 600, anodized surface • Working range up to 506 mm diameter Fedpfxeri Sicj Am Sjph • No additional material handling required, resulting in savings on crane capacity, labor hours, and energy If machines are used for this purpose, you need to crane the workpiece to the machine and then back to the picking area – the time loss for just 2 center drillings is immense. • Ready for use within seconds • Infinitely variable clamping, 3 diameter ranges • Produce a center drilling within seconds (immediately after sawing at the machine) • All components are manufactured in Germany • Centerings according to DIN 333 Form A, 60°, 5, 6.3, and 8 mm. Other specifications possible on request. A "must-have" for every steel trader! • Sales price: €5,950 net plus VAT ex works, free shipping within Germany • Scope of delivery: device, Fein cordless drill, charger, • 2 batteries – complete in case • 3 center drills (5, 6.3, and 8 mm DIN 333 A with flat), incl. 3 holders, one 6 m

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, Clamping range 25 mm ID to 120 mm OD Electric drive: 1050 W, 230 V, 50 Hz Tool holder speed (no load): 150 rpm, nominal: 70 rpm Clamping with wrench Manual tool feed Weight approx. 6.5 kg Including operating manual In wooden box Including 1 facing cutter 90° and 2 chamfering cutters 30° Fpsdpfjvr Ec Aox Am Seh

Kondisi: baik (bekas), Tahun pembuatan: 2006, Stork FIM NT12+ HD Endkontrollmaschine Geflügel Hersteller: Stork Modell: FIM NT12+ HD Baujahr: 2006 Anzahl der Einheiten: 12 Fodpfjv Hx Nfox Am Seph Leistung: 8.000–9.000 T/h Abmessungen (LxBxH): 1.365 x 1.205 x 2.750 mm Maschinengewicht: 750 kg.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2013, jam operasional: 72.700 h, nomor mesin/kendaraan: A1220A1012, jam kerja laser: 34.021 h, ketebalan pelat baja (maks.): 25 mm, ketebalan maksimum lembaran baja tahan karat: 20 mm, tebal plat aluminium (maks.): 12 mm, panjang kerja: 3.000 mm, lebar kerja: 1.500 mm, Laser cutting system + LiftMaster + 4 STOPA storage towers No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Control unit: Sinumerik 840D SL Working area: 3,000 x 1,500 x 115 mm Max. Speed: 140 m/min Accuracy: 0.1 mm Laser: CO2 laser TruFlow 5000 with optimized standby mode Laser power: 5,000 W Max. sheet thickness (steel): 25 mm Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminum): 12 mm STOPA storage system with 4 towers Year of manufacture: 2006 Load capacity: 3 t Sheet format: 1,250 x 2,500 mm Storage capacity: 63 t Total height: 3,800 mm Storage positions: 21 MACHINE DETAILS Operating hours: 72,700/34,021 h Length: 9,300 mm Width: 4,600 mm Height: 2,200 mm Weight: 12,000 kg Voltage: 400 V 50 Hz Connected load: 105 kVA EQUIPMENT FEATURES Torque drive in combination with linear direct drives Enclosed beam guidance Single cutting head strategy Cooling unit Automatic longitudinal pallet changer Wide longitudinal conveyor Positioning laser diode Spray unit Fpodpjy U Nf Sjfx Am Sjh PierceLine FocusLine NitroLine PlasmaLine ControlLine ContourLine FastLine FlyLine AdjustLine Microweld Production planning Rapid re-manufacturing Automatic shutdown Maintenance-friendly turbo radial fan Laser control TASC Laser cutting head with 250 mm lens Universal quick-change cutting head system (UTI) with bus interface LensLine with condition monitoring CE marking Light barriers Multi-chamber extraction system Laser monitoring system Compact extraction & dust collection unit

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 14219, jarak pergerakan sumbu X: 1.250 mm, jarak lintasan sumbu Y: 900 mm, jarak gerak sumbu Z: 560 mm, diameter spindel: 75 mm, kecepatan spindel (maks.): 1.800 rpm, machineseeker-agricultural Fsdpjzaqxcefx Am Soph

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 460 mm, model controller: HEIDENHAIN ITNC 530, kecepatan spindel (maks.): 28.000 rpm, de-01 Fpedpfozaqhqex Am Seh

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: GD12002, berat benda kerja (maks.): 150 kg, panjang penggilingan: 1.000 mm, diameter penggilingan: 360 mm, berat keseluruhan: 4.700 kg, de-tech-0002 Fpjdpfey Ukz Usx Am Sjh

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 162881, diameter putar di atas sled silang: 410 mm, panjang pembubutan: 1.000 mm, diameter pembubutan: 340 mm, lubang spindel: 80 mm, kecepatan rotasi (maks.): 3.800 rpm, TECHNICAL DETAILS Swing diameter over bed: 530 mm Swing diameter over cross slide/saddle: 410 mm Distance between centers: 1,000 mm Maximum turning diameter: 340 mm Maximum machining length: 1,000 mm Travel X-axis (XA): 260 mm Travel Z-axis (ZA): 1,016 mm Travel X-axis (XB): 139 mm Fpedpfoy U T Dlsx Am Sjh Travel Z-axis (ZB): 965 mm C-axis: 360° Control unit: Okuma OSP-P200LA Spindle speed: 38–3,800 rpm Speed ranges: stepless, automatic range selection Spindle nose: Option A2-8 Big Bore Spindle bore: 80 mm Main drive motor: 22.37 kW Torque: 412.17 Nm Upper multitasking turret: V-12 NC turret Lower turret: V8 (VDI) Indexing time without lifting: 0.18 s Driven tool speed: 45 – 4,500 rpm Motor for driven tools: 7.08 kW Rapid traverse X/Z: 333.16 / 416.56 mm/s Rapid traverse C axis: 3.333 rev/s Tailstock quill diameter: 90 mm Tailstock quill taper: MT #5 Tailstock quill stroke: 120 mm MACHINE DETAILS Machine weight: 8,800 kg Supply voltage: 220/480 V Phases: 3-phase Frequency: 60 Hz Rated apparent power: 31 kVA Full load current: 81.7/37.5 A Maximum motor nominal current: 96 A Short circuit rated values: 30/10 kA

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 8.000 kN, diameter sekrup: 95 mm, jarak antara tiang: 1.120 mm, tekanan injeksi: 1.795 batang, lintasan ejektor: 250 mm, Kein Mindestpreis - garantierter Verkauf zum höchsten Gebot! Fedpfey Ulhcex Am Soph

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 220 mm, kecepatan spindel (maks.): 4.000 rpm, jarak pergerakan sumbu X: 240 mm, jarak lintasan sumbu Y: 90 mm, jarak gerak sumbu Z: 580 mm, No reserve price – guaranteed sale to the highest bidder! The original price of the machine was €342,000! Fsdpfey Ukhhex Am Seph Due to inquiries, the auction has been extended by 2 weeks. TECHNICAL DETAILS Max. passage / max. clearance: 220 mm Max. turning diameter: 220 mm Distance spindle nose – tailstock center: 614 mm Center distance / distance between centers: 800 mm Travel X1 and X2: 167.5 mm Travel X3: mm Travel Z1 and Z2: 515 mm Travel Z3: 580 mm Travel Y: +45 / -45 mm Rapid traverse X: 30 m/min Rapid traverse Z: 30 m/min Rapid traverse Y: 20 m/min Axis acceleration: 9.8 m/s² Main Spindle Max. speed: 4,000 rpm Outer diameter of front bearing: 170 mm Inner diameter of front bearing: 110 mm Spindle nose: ASA 6" A2 Spindle bore: 72.5 mm Draw tube bore: 66 mm Chuck diameter: 210 mm Chuck bore: 66 mm Spindle power max. / S3 25% / S1: 35.5 / 28.3 / 23.5 kW Spindle torque max. / S3 25% / S1: 205 / 180 / 150 Nm Counter Spindle / Sub-Spindle Max. speed: 4,000 rpm Outer diameter of front bearing: 170 mm Inner diameter of front bearing: 110 mm Spindle nose: ASA 6" A2 Spindle bore: 72.5 mm Draw tube bore: 66 mm Chuck diameter: 210 mm Chuck bore: 66 mm Power max. / S3 25% / S1: 35.5 / 28.3 / 23.5 kW Torque max. / S3 25% / S1: 205 / 180 / 150 Nm Tailstock / Centre Morse taper: MT3 Tailstock travel: 580 mm Max. force: 500 kgf Turret / Tool Holder Number of stations: 24 Tool cross-section: 20×20 / 25×25 mm Tool change time: 0.1 s Clamping force at 45 bar: 3,200 kgf Driven Tools Number of rotating stations: 12 Max. speed: 12,000 rpm Power max. / S1: 14 / 10 kW Max. torque / S1: 42 / 32 Nm Fluids / Tanks / Supply Coolant tank, side: 510 l Coolant tank, rear: 330 l Hydraulic oil tank: 18 l Lubrication oil tank: 4 l Installed power: 87 kVA Operating voltage: 400 V, 50 Hz ±5% Optional voltage per table: [230 V, 50 Hz ±5%] Max. ambient temperature: 35 °C MACHINE DETAILS CNC control: FANUC 31iPLUS Dimensions & Weight Dimensions (L x W x H): 2,860 × 2,377 × 2,289 mm Total weight: 11,000 kg Internal volume: 1.7 m³ EQUIPMENT Coolant supply through left spindle Hainbuch AXZUG 65 collet chuck (standard) 2702/0008 for left spindle SMW-Autoblok BBD 175 3-jaw chuck 56 with one set of soft jaws for right spindle Measuring arm Hinged belt chip conveyor with side discharge Upper turret station (T1) dual high-pressure pump (6+15 bar, 55 l/min) Internal turret station (12) dual high-pressure pump (6+15 bar, 55 l/min) Machine status light Automatic workpiece unloader Workpiece unloader with pneumatic open/close function for collecting ejected parts Pneumatic part ejector for sub-spindle with 100 mm stroke, stroke adjustment, and end position sensor Unimag interface for bar feeder

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, jam operasional: 53.548 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 01160014061, panjang pembubutan: 630 mm, diameter pembubutan: 420 mm, bukaan ragum: 66 mm, jenis kontrol: Kontrol CNC, Perlengkapan: konveyor serpihan, Tidak ada harga minimum - dijamin terjual kepada penawar tertinggi! RINCIAN TEKNIS Area Pemesinan Diameter pemutaran: maks. 420 mm Panjang pemutaran: maks. 630 mm Lubang spindel: 66 mm Revolver Kepala alat: 12 alat Sauter VDI30 Kontrol CNC: 4290 Heidenhain DETIL MESIN Data Listrik Tegangan: 400 V Tegangan bantu: 230 V / 24 V Frekuensi: 50 Hz Arus: 80 A Daya terpasang: 44 kVA PERLENGKAPAN Fpodsza D Rfspfx Am Seh Sumbu C dengan alat berputar Konveyor serbuk mesin Dokumentasi 2 pemegang alat berputar Referensi eksternal: 598

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 5.744 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6100000012E, panjang pembubutan: 393 mm, diameter pembubutan: 228 mm, kecepatan spindel (maks.): 3.000 rpm, bukaan ragum: 51 mm, Perlengkapan: konveyor serpihan, 603 Fjdpsza D Iwjfx Am Sjph

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 760 mm, jarak lintasan sumbu Y: 430 mm, jarak gerak sumbu Z: 460 mm, kecepatan spindel (maks.): 10.000 rpm, model controller: Siemens Sinumerik 828D CNC, DETAIL TEKNIS Perjalanan sumbu X: 760 mm Perjalanan sumbu Y: 430 mm Perjalanan sumbu Z: 460 mm Pengambilan spindel: SK40 Kecepatan putar spindel: 10.000 rpm Kecepatan pemberian: 10.000 mm/menit Ukuran meja X: 900 mm Ukuran meja Y: 410 mm Bobot benda kerja maks.: 350 kg Jumlah sumbu: 3 DETAIL MESIN Kontrol: Siemens Sinumerik 828D CNC Penukar alat: 24 posisi Fpodpfx Amozap Dws Soh Daya penggerak: 12 kW Pendinginan alat melalui spindel: 30 bar PERLENGKAPAN Probe pengukur Renishaw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 300 mm, jarak gerak sumbu Z: 300 mm, berat benda kerja (maks.): 500 kg, model controller: Mitsubishi 32-bit EDM Steuerung, de-tech-details-01 Fodpfxezapyls Am Seph