Beli Mesin Cetak Layar bekas (77.861)

Kondisi: siap digunakan (bekas), trans_001 Dusdjtia Hhspfx Ahuor

Kondisi: bekas, Tahun pembuatan: 2001, feuchtwerk-gmb-001 Dsdpfxeyx A S Hs Ahueur

Kondisi: baik (bekas), gaya penjepit: 4.500 kN, diameter sekrup: 60 mm, jarak antara tiang: 800 mm, volume langkah: 795 cm³, panjang total: 8.500 mm, lebar total: 2.300 mm, tinggi total: 2.400 mm, berat keseluruhan: 22.000 kg, Data teknis: Gaya penutup: 4500 kN (450 t) Jarak bukaan: 800 mm Jarak antar tiang terang: 800*800 mm Diameter sekrup: 60 mm Volume langkah: 795 m³ Berat total: 22.000 kg Dimensi: 8,5 m*2,3 m*2,4 m Dujdpfx Aeyx Evushuor

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 69.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.250 kN, diameter sekrup: 45 mm, Dijual mesin injeksi merek KraussMaffei tipe KM 125-700C2. Mesin dalam kondisi fungsional penuh dan masih beroperasi hingga akhir-akhir ini. Data teknis: Tahun pembuatan: 2000 Jam operasional: 69.000 jam Gaya penutup: 125 t Diameter silinder: 45 mm Katup jarum: Pneumatik Dedpsx Ituqefx Ahujur Penarik inti: 2x hidrolik Sensor tekanan internal

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 118.400 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 182854, gaya penjepit: 2.500 kN, berat keseluruhan: 14.000 kg, kapasitas pemanasan: 23,1 kW (31,41 hp), jenis arus masuk: tiga fasa, Dijual mesin injection molding Arburg 630 S 2500-130. Mesin dalam kondisi baik dan siap digunakan segera. Data teknis: Tahun pembuatan: 11/2000 Tempat pembuatan: Made in Germany Gaya penjepitan: 2500 kN Jam operasi: 118.400 jam Unit injeksi: Volume tembakan 1300 cm³ Berat total mesin: 14.000 kg Tegangan operasi: 400 V (3 ~ AC) Frekuensi: 50 Hz Daya pemanas: 23,1 kW Motor pompa: 45,0 kW Daya terpasang total: 68,1 kW Dsdpjyx Daxjfx Ahujur

Kondisi: bekas, Tahun pembuatan: 1980, 1 Dujdpoyx Ik Uefx Ahusr

Kondisi: bekas, Tahun pembuatan: 1982, tech-press-001 Djdpfxoxwdrvo Ahueur

Kondisi: bekas, Tahun pembuatan: 1991, prod-001 Dedpfjvzxqrjx Ahusur

Kondisi: bekas, Tahun pembuatan: 1998, Pressure 3500 t Stroke 900 mm Distance table/ram, stroke bottom 1000 mm Distance table/ram, stroke top 1900 mm Table size 3150 x 2150 mm Ram size 3150 x 2150 mm Maximum total tool weight 30.0 t Maximum upper tool weight 20.0 t Speed from 400 mm/s Working speed 0.9 – 9.2 mm/s Hydraulic operating pressure 280 bar Dujdpsvuukhofx Ahuor Oil capacity 5500 l Rated current 760 A Voltage 400 V Frequency 50 Hz Drive power 425 kW Weight 231.0 t SPECIAL OFFER As is, disassembled, and stored WITHOUT commissioning / WITHOUT further work Free loading onto truck Hydroforming press / IHU press / Internal high-pressure forming press Maximum preforming force approx. 1000 t Total tool weight approx. 30 t Upper tool weight approx. 20 t · Tool interface: 4 controlled axes, 3 on/off functions ram, 4 on/off functions table · Parallelism control: along the press longitudinal side · Light curtain: front and rear · Light barrier: left and right side · Ram locking in upper position · Two-hand operator panel: 1 · Independent high-pressure water hydraulic system: 2 · Max. operating pressure: 3,000 bar · Displaced volume of each pressure intensifier: 3.74 l · 2 filling pumps: volume and pressure dependent on mains supply · Location of pressure intensifier: to be determined · Main pumps: located on the press head piece/oil tank · Tool change table: 6.7 x 2.15 m · Max. tool size: 3.15 x 2.15 m · Tool clamping on ram: Hydraulic · Tool clamping on table: Mechanical · Electrical control: Schuler Multiview HF Note: This machine is an EU re-import! If the machine is to be installed and operated within the EU, it must be adapted to comply with the current EU regulations of the country of installation before commissioning. These works are not included in the offer price.

Kondisi: bekas, Tahun pembuatan: 1993, Pressing force 500 t Upright distance 2,240 mm Dujdpfx Aevuk I Njhusr Stroke 1,180 mm Distance table/ram, max. stroke up, adjustment up 1,800 mm Table surface 2,050 x 1,800 mm Cushion force in table 250 t Cushion stroke in table 380 mm Cushion area in table 1,800 x 1,200 mm Cushion force in ram 122 t Cushion stroke in ram 200 mm Cushion area in ram 1,800 x 1,200 mm Ram area 2,215 x 1,800 mm Table height above floor 500 mm Speed down from 400 mm/s Speed up 10 – 400 mm/s Working speed 10 – 100 mm/s Foundation depth 3.0 m Drive power 122 + 75 + 64.5 kW Weight 110.0 t Space requirement (W x D x H) 3.6 x 2.2 x 8.5 m Height above floor 6.8 m Approved for manual loading operations according to German accident prevention regulations (UVV) with oil-hydraulic drive, hydraulic cushion in table and ram, blanking shock absorber, ram locking Foundation depth approx. 3.0 m Press currently being overhauled with Siemens S7 control / Pilz safety control A sister machine can also be offered as-is, partially disassembled.

Kondisi: bekas, Tahun pembuatan: 1993, Pressing force 315 t Distance between uprights 1660 mm Stroke 400 mm Distance table/ram, stroke up 600 mm Table size 1600 x 1000 mm Table height above floor 960 mm Cushion pressure in table 80 t Cushion stroke in table 200 mm Cushion area in table 950 x 650 mm Lateral upright clearance 720 mm Ram area 1600 x 1000 mm Oil capacity 1400 l Drive power 57.0 kW Dsdpfsvuuhmsx Ahujur Weight 30.0 t Required floor space (W x D x H) 3.0 x 2.9 x 4.4 m Approved for manual loading operations according to German accident prevention regulations (UVV) With oil-hydraulic drive, hydraulic cushion in table Can be offered either as-is (non-running) or alternatively with new Siemens S7-1500 F control system

Kondisi: bekas, Tahun pembuatan: 1982, Pressing force: 350 t Column gap: 1350 mm Stroke: 900 mm Duedpfx Asvuk Iiohuor Distance table/ram, large stroke up, upper dead center adjustment: 1300 mm Table area: 1300 x 1000 mm Cushion pressure in table: 100 t Cushion stroke in table: 380 mm Cushion area: 350 x 285 mm Ejector force in ram: 25 t Ejector stroke in ram: 200 mm Table height above floor: 750 mm Ram area: 1300 x 1000 mm Approach speed: from 500 mm/s Return speed: 160 - 470 mm/s Working speed: 16 - 44 mm/s Drawing speed: 57 - 160 mm/s Retraction force: 32 t Oil capacity: 1700 l Drive power: 91.0 kW Required floor space (W x D x H): 3.75 x 2.8 x 7.2 m Height above floor: 5.28 m Approved for manual loading operations according to German accident prevention regulations (UVV) With electrohydraulic drive, light curtain (Sick), pressure/time and stroke-dependent control, hydraulic cushion in table (adjustable), hydraulic ejector in ram, top dead center ram locking, variable speed control, two-hand operation Partially dismantled and in storage - can be offered as is without commissioning, with commissioning in the current condition, or alternatively with new Siemens S7-1500 F control

Kondisi: bekas, Tahun pembuatan: 1993, Press force 315 t Upright distance 2060 mm Stroke 700 mm Distance table/ram, stroke at top 1100 mm Table surface 2000 x 1000 mm Cushion force in table 125 t Cushion stroke in table 200 mm Duodpfxsvuudzj Ahujr Cushion area 1200 x 600 mm Table height above floor 750 mm Table height above floor (when installed at ground level) 1100 mm Lateral upright passage 720 mm Ram area 2000 x 1000 mm Oil capacity 1800 l Drive power 90.0 kW Weight 35.0 t Space requirement (WxDxH) 3.6 x 2.75 x 5.65 m Approved for manual feeding work according to German accident prevention regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in the table, cutting shock absorber (with motorized depth adjustment) no foundation pit required can be offered either without commissioning (WITHOUT screen / operator console) or alternatively with new Siemens S7-1500 F control system, including new operator console and interface

Kondisi: bekas, Tahun pembuatan: 1980, de-to-hu-it-lt Dsdoyx Il Espfx Ahujur

Kondisi: bekas, Tahun pembuatan: 1984, Press force 200 t Upright distance 1800 mm Stroke 710 mm Distance table/ram, max. stroke top, adj. top 1100 mm Table area 1600 x 1300 mm Cushion force in table 80 t Cushion stroke in table 250 mm Cushion area 1400 x 1080 mm Table height above floor 800 mm Lateral frame opening 800 mm Ram area 1660 x 1300 mm Downward speed from 400 mm/s Upward speed 410 mm/s Working speed 14.3 - 49.7 mm/s Drive power 38.0 + 13.0 kW Dsdpfx Ahsyx Ilrouour Weight 25.0 t Space requirement (W x D x H) 3.65 x 3.3 x 5.4 m Height above floor 5.05 m Height below floor 0.4 m Approved for manual loading according to German accident prevention regulations (UVV) Equipped with oil-hydraulic drive, pressure/time and travel-dependent control, light barriers (Sick) front and rear, hydraulic cushion in table (controllable), hydraulic blanking shock absorption (in side frame), mechanical depth stop (motor adjustable), mechanical ram lock, two-hand control Can be offered either without commissioning or alternatively with new Siemens S7-1500 F control system

Kondisi: bekas, Tahun pembuatan: 1959, cold-header-specs-001 Duedpfxsyx Ihge Ahujr

Kondisi: bekas, Tahun pembuatan: 1966, HU-001 Duedpfx Aov Sva Eohusr

Kondisi: bekas, Tahun pembuatan: 1996, druck-100t-ausladung-510mm Djdpfxsvuunmj Ahusur

Kondisi: bekas, Tahun pembuatan: 2007, druck_315t_techdata Djdevuukbjpfx Ahuour

Kondisi: bekas, Tahun pembuatan: 1989, Pressure: 100 t Clearance between uprights: 1,060 mm Stroke: 700 mm Distance table/ram, max stroke up, adjustment up: 1,250 mm Table area: 1,000 x 700 mm Drawing cushion pressure in table: 40 t Drawing cushion stroke in table: 200 mm Drawing cushion area: Ø 250 mm Table height above floor: 950 mm Lateral upright passage: 580 x 750 mm Ram area: 1,000 x 700 mm Oil capacity: 700 l Drive power: 47.0 kW Weight: 13.0 t Space required (WxDxH): 2.2 x 1.8 x 5.0 m Approved for manual loading/unloading according to German accident prevention regulations (UVV). Equipped with oil-hydraulic drive, pressure/time and stroke-dependent control, hydraulic drawing cushion in table, ejector in ram, mechanical depth stop (motorized adjustable), ram locking device (SITEMA). Dedpfx Aevuk Naehujur Can be offered without commissioning or alternatively with new Siemens S7-1500 F control system.

Kondisi: bekas, Tahun pembuatan: 2010, de-to-hu Djdpfx Ahjvuubmeusur

Kondisi: bekas, Tahun pembuatan: 1991, copy1 Dujdpfevuuacjx Ahusr

Kondisi: bekas, Tahun pembuatan: 1991, Pressing force: 100 t Clearance between uprights: 770 mm Stroke: 200 mm Distance between table/ram, stroke up: 800 mm Table surface: 770 x 900 mm Table height above floor: 850 mm Duedpfx Aevut Ufshusr Cushion pressure in table: 40 t Cushion stroke in table: 200 mm Cushion surface in table: 600 x 600 mm Lateral upright passage: 600 mm Ram surface: 770 x 900 mm Downward speed: 62 mm/s Upward speed: 350 mm/s Working speed: 17.5 mm/s Oil capacity: 700 l Drive power: 42.0 kW Weight: 9.0 t Space requirement (WxDxH): 2.6 x 2.0 x 3.8 m Approved for manual loading/unloading according to German accident prevention regulations (UVV) Featuring oil-hydraulic drive; pressure, time, and position control; hydraulic cushion in the table; cut impact damping; depth stop; two-hand operation No foundation pit required Available as-is (not commissioned), in current installed state, or optionally retrofitted with new Siemens S7-1500 F control system – video before dismantling available from seller

Kondisi: bekas, Tahun pembuatan: 1990, de-HU-01 Dujdsvut Tbjpfx Ahujr

Kondisi: bekas, Tahun pembuatan: 1979, Pressure 160 t Gap between uprights 1620 mm Stroke 600 mm Distance table/ram, stroke at top 800 mm Table area 1600 x 1100 mm Table height above floor 750 mm Cushion pressure in table 63 t Cushion stroke in table 180 mm Djdpfx Ahevut Ryjusur Cushion area in table 1300 x 750 mm Lateral upright clearance 600 mm Ram area 1600 x 1100 mm Oil capacity 1160 l Drive power 30.0 + 16.0 kW Weight 23.6 t Space requirement (WxDxH) 2.9 x 2.3 x 4.65 m Height above floor 4.26 m Approved for manual loading/unloading in accordance with German accident prevention regulations (UVV) with oil-hydraulic drive, hydraulic cushion in table No foundation pit required Can be offered as is, with commissioning, or alternatively with new Siemens S7-1500 F control system Video at the seller available prior to dismantling