Beli Mesin Cuci Tekanan Tinggi bekas (82.127)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 90-15, panjang total: 4.275 mm, lebar total: 3.300 mm, tinggi total: 3.200 mm, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, tinggi kerja: 800 mm, daya: 25 kW (33,99 hp), tekanan: 6 batang, Neptun mesin pencuci horizontal Tipe: Tornado HP 1664 Ukuran minimum: 150 x 300 mm Nsdpfx Alsyg H Akeksla Ukuran maksimum: 1600 mm Ketebalan kaca: 3-38 mm

Tahun pembuatan: 2016, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 160410, Open-top wasmachine voor 3-12 mm Washoogte 1600 mm Nlodswnw Afopfx Alkea

Tahun pembuatan: 2013, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: B3.00122.2279, Stationary high-pressure pump unit Hammelmann HDP 122 mounted on a base frame. Comparable to, but not Kamat, Uraca, or Woma. Pump type: HDP 122 Operating pressure: 440 bar Flow rate: 92 l/min Drive speed: 1500 rpm Drive power: 75 kW Equipped with AC Motors ACM 208S 75 kW electric motor, IP55, Nedshf Ixmspfx Alkjla with pressure regulating valve, with safety valve, with oil cooling system. Dimensions (LxWxH): approx. 1,800x900x1,450 mm Weight: approx. 1,230 kg Year of manufacture: 2015 Condition: in very good used condition.

Tahun pembuatan: 2005, Kondisi: baik (bekas), Stationary high-pressure pump unit URACA KD716-G on base frame for all cleaning and pressure testing applications. Similar to, but not Hammelmann, Woma, or Kamat. Operating pressure: 100 bar Flow rate: 263 l/min Drive speed: 1,500 RPM Drive power: 46 kW Equipped with AEG 3~ motor Equipped with URACA MSSV 32/150 safety and control valve With control panel, pressure gauge, and pulsation damper. Dimensions (LxWxH): approx. 1900x1100x900 mm Weight: approx. 1,000 kg Year of manufacture: 2005 (MSSV valve year: 2015) Condition: in good used condition. Nlodem Uywlopfx Alksa

Tahun pembuatan: 1996, Kondisi: baik (bekas), nomor mesin/kendaraan: 96.01112.1496, Stationary high-pressure pump unit Hammelmann HDP 112 on base frame. Similar but not Kamat, Uraca, Woma. Pump type: HDP 112 Operating pressure: 300 bar Flow rate: 153 l/min. Drive speed: 1500 rpm Drive power: 90 kW Equipped with VEM motor 90 kW 3-phase motor, IP55 With pressure control valve, With safety valve, With oil cooling system. Dimensions (LxWxH): approx. 2300x1000x1400 mm Weight: approx. 1500 kg Year of manufacture: 1996 Condition: in good used condition. Nodohtnniepfx Alksla

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: B2.01127.1899, Stationary high-pressure pump unit Hammelmann HDP 127 on base frame. Similar but not Kamat, Uraca, Woma. Pump type: HDP 127 Operating pressure: 650 bar Flow rate: 72 l/min Drive speed: 1500 rpm Drive power: 87 kW Fitted with EMK KAE2G280M-4B3E3K electric motor, 90 kW, IP55, IE3 Nledpjix I H Uofx Alkoa Equipped with pressure regulating valve, safety valve, oil cooling system. Dimensions (LxWxH): approx. 1,700 x 850 x 1,350 mm Weight: approx. 1,200 kg Year of manufacture: 2012 Condition: In very good used condition.

Tahun pembuatan: 2018, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: B8.01142.0395, Stationary high-pressure pump unit Hammelmann HDP 142 mounted on base frame. Similar to, but not Kamat, Uraca, Woma. Pump type: HDP 142 Operating pressure: 610 bar Flow rate: 78 l/min Drive speed: 1,500 rpm Drive power: 86 kW Equipped with AC M 280 M-4/HE electric motor 90 kW, IP55 With pressure control valve With safety valve With oil cooling system Dimensions (LxWxH): approx. 1,700x850x1,450 mm Weight: approx. 1,200 kg Nlodpfx Aeh E Dgzelkja Year of manufacture: 2018 Condition: Serviced by Hammelmann in October 2020, operated for only a few weeks afterward and has been out of operation for over a year. In very good used condition.

Kondisi: baru, tekanan kerja: 150 batang, panjang selang tekanan tinggi: 10.000 mm, tegangan masuk: 230 V, berat keseluruhan: 101 kg, masa garansi: 24 bulan, The offered HDS line places its primary focus on ergonomics and working comfort. Due to its compact size, the unit can also be used in hard-to-reach locations or where frequent relocation is required. Additional carry handles allow for convenient transport of the device along with other equipment. Thanks to EASY!Force technology, the force required to hold the trigger is reduced to zero. The device is also equipped with the EASY!Lock mounting system, enabling you to switch attachments five times faster compared to traditional threaded systems. This device is brand new and in its original packaging. Product Advantages: - A reliable brass pump ensures maximum efficiency and long-lasting operation. Nlsdpfx Aljv Tng Hjksa - The open design provides easy access to all essential components of the device, and extremely simple pressure regulation via the rotary knob on the pump. - The automatic pressure relief system extends the service life of the unit. - A large water filter protects the pump from contaminants that may be present in the water. - The device also features an EASY!Lock mounting system, allowing you to change equipment five times faster than with conventional thread systems. - High operational flexibility thanks to 230V power supply. Technical Data: Condition: NEW Voltage (Ph/V/Hz): 1 / 230 / 50 Pump capacity (l/h): 260 - 560 Operating pressure (bar): 30 - 150 Water inlet temperature (°C): max. 80 Power input (kW): 3.4 Fuel consumption (kg/h): 3.1 Heating oil consumption, eco-efficiency (g/h): 2.5 Power cable (m): 5 Nozzle size: 025 Fuel tank (l): 15 Weight with accessories (kg): 101.4 Weight with packaging (kg): 110 Dimensions (L x W x H) (mm): 1066 x 650 x 920 Equipment: - Spray gun: Karcher Professional !EasyForce Advanced - High-pressure hose: Karcher Professional – 10m – !EasyLock - Lance: Karcher Professional 1050 mm !EasyLock - Nozzle: POWER Karcher Professional !EasyLock pressure nozzle

Kondisi: baik (bekas), Tahun pembuatan: 1998, DONAU DANUMERIC 440, tahun pembuatan 1998 Data teknis: - Meja 1800 x 600 mm, 4 alur-T - Jangkauan pengeboran 540 – 1590 mm - Dudukan spindel SK40 Nedpjyplb Rsfx Alkela - Kecepatan putar 15 – 2800 rpm - Daya motor 5,5 kW - Berat sekitar 2.800 kg

Kondisi: baik (bekas), Tahun pembuatan: 2014, panjang pemakanan sumbu X: 1.000 mm, panjang umpan sumbu Y: 700 mm, panjang umpan sumbu Z: 180 mm, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 180 mm, de Nledpfx Aoywu Tyjlksa

Kondisi: bekas, Tahun pembuatan: 1990, jam operasional: 9.500 h, Fungsionalitas: berfungsi sepenuhnya, tekanan: 1.000 batang, tekanan kerja: 1.000 batang, bahan bakar: diesel, kapasitas tangki air: 2.000 l, kapasitas tangki bahan bakar: 600 l, tekanan air: 1.000 batang, kapasitas pompa: 130 l/menit, Kami menawarkan jet air tekanan tinggi bekas Woma 325ZP30 dalam kontainer isothermal, tahun pembuatan 1990. Unit dapat dijual terpisah tanpa kontainer. Njdpfxoyu Imtj Alkola Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan atau hubungi kami.

Kondisi: bekas, Tahun pembuatan: 1976, 88628009 Nodpsyn R N Dsfx Alkola

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Tapping device • Two 18 mm T-slots each on the machine base, rear and left sides • Machine lamp • Central lubrication system • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Ranges Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from: min-1 15 - 200 Nsdpfjynt Ucex Alksla Feed Drives Feed, infinitely variable mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight of DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical circuit diagram

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, gaya tekuk (maks.): 80 t, jenis kontrol: Kontrol CNC, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, MESIN TEKAN FARINA 4175 X 80 MOD. 80/40 REGISTRASI BELAKANG BERMOTOR CNC DELEM DA 24e – 3 sumbu PENJEPIT SCHIAVI MEJA KOMPENSASI MESIN BEKAS KODE INTERNAL: SVR 397 Nledeyv Hbtepfx Alkoa

Kondisi: baik (bekas), Tahun pembuatan: 2002, 10442 Nedpfxoym Nbce Alkela

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 2.200 mm, jarak gerak sumbu Z: 1.100 mm, panjang meja: 4.500 mm, lebar meja: 2.500 mm, kecepatan spindel (maks.): 22.000 rpm, CNC Heidenhain iTNC 640 WORKING RANGE X-axis longitudinal travel: 4,000 mm Y-axis transverse travel: 2,200 mm Z-axis vertical travel: 1,100 mm Maximum speed with interpolating axes: 50 m/min WORK TABLE Dimensions: 4,500 x 2,500 mm Height: 300 mm Load capacity: 15 t/m2 T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling elements. T-slot direction parallel to Y-axis movement. CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE HOLDER Automatic universal head indexed at 360,000 positions (every 0.001°). The rotation movement is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for undercuts up to 10°. Internal cooling system for bearings and axis motors. C-axis rotation range: +/- 270° A-axis rotation range: +/- 185° Maximum axis rotation speed: 30 rpm Maximum available torque on A/C axes: 450 Nm Axis clamping torque: 1,400 Nm Available spindle power (S1/S6): 22/33 kW Nledpfx Aljyv In Iekea Available spindle torque (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Constant power speed range: 3,000 to 18,000 rpm Constant torque speed range: 10 to 3,000 rpm Tool interface: HSK-A63 DIN 69893 HSK-A100 ELECTROSPINDLE WITH SEMI-AUTOMATIC CHANGE SYSTEM: Available spindle power (S1/S6): 37/43 kW Available spindle torque (S1/S6): 140/165 Nm Maximum spindle speed: 15,000 rpm Constant power speed range: 2,500 to 12,000 rpm Constant torque speed range: 10 to 2,500 rpm Tool interface: HSK-A100 DIN 69893 55-STATION CHAIN TOOL MAGAZINE, HSK-A100 / HSK-A63: Fixed floor-mounted chain magazine located at the rear of the machine, cased for operator protection, with vertical tool change arm and automatic tool preparation. “Fixed position” management. Hydraulic axis clamping Total tools: 55 Tool type: HSK-A63 DIN 69893 Number of tools: 30 Max tool diameter: 90 mm Max tool diameter with adjacent spaces empty: 160 mm Max tool length: 300 mm Max tool weight: 10 kg Tool type: HSK-A100 DIN 69893 Number of tools: 25 Max tool diameter: 100 mm Max tool diameter with adjacent spaces empty: 160 mm Max tool length: 450 mm Max tool weight: 20 kg REQUIRED CONNECTIONS: Maximum installed power: 177 kVA Maximum required current: 235 A Machine is equipped with: - Heidenhain HR550 remote electronic handwheel - High-pressure coolant and air through the spindle - Semi-automatic change of electrospindle, with HSK-A63 and HSK-A100 interface - Various tooling included with the machine - Renishaw probe - BLUM laser presetter - AUTOCAL automatic head calibration system - Visormax subscription for remote monitoring - Electrical cabinet air conditioning - Cooling system for all axes and the electrospindle - User and maintenance manual and CE certificate of conformity

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 2.700 mm, jarak gerak sumbu Z: 1.500 mm, laju pemakanan gandar Y: 50 m/menit, panjang meja: 6.000 mm, lebar total: 3.000 mm, kecepatan spindel (maks.): 22.000 rpm, gerak cepat sumbu X: 50 m/menit, pergeseran cepat sumbu Y: 50 m/menit, pergerakan cepat sumbu Z: 50 m/menit, hidung spindel: hsk 100, CNC Heidenhain iTNC 640 WORKING AREA X-axis longitudinal travel: 6,000 mm Y-axis cross travel: 2,700 mm Z-axis vertical travel: 1,500 mm Maximum feed rate with interpolating axes: 50 m/min WORK TABLE Dimensions: 6,000 x 3,000 mm Height: 300 mm Load capacity: 15 T/m² T-slots for fixture clamping: 28 mm, DIN 650 (H12), supplied with leveling bolts. T-slot direction parallel to Y-axis travel. CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE INTERFACE Universal automatic head indexed to 360,000 positions (increments of 0.001°). Rotary motion is direct-drive motor controlled, with CNC position axis feedback. Automatic tool clamping. Allows 10° undercut. Internal cooling system for bearings and axis motors. C-axis rotation range: +/- 270° A-axis rotation range: +/- 185° Maximum rotation speed of axes: 30 rpm Maximum working torque on A/C axes: 450 Nm Clamping torque of axes: 1,400 Nm Spindle motor power (S1/S6): 22/33 kW Spindle motor torque (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Constant power speed range: 3,000 to 18,000 rpm Constant torque speed range: 10 to 3,000 rpm Tool interface: HSK – A63 DIN 69893 ELECTROSPINDLE HSK – A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM: Spindle motor power (S1/S6): 37/43 kW Spindle motor torque (S1/S6): 140/165 Nm Maximum spindle speed: 12,000 rpm Constant power speed range: 2,500 to 12,000 rpm Constant torque speed range: 10 to 2,500 rpm Tool interface: HSK – A100 DIN 69893 CHAIN TOOL MAGAZINE 55 POSITIONS, HSK – A100 / HSK – A63: Stationary chain magazine mounted at the rear of the machine, enclosed for operator protection, with tool change arm in vertical position and automatic presetting. Fixed-position management. Hydraulically actuated axis clamping Total tools: 55 Tool type: HSK-A63 DIN 69893 Tools: 30 pcs Max. tool diameter: 90 mm Max. tool diameter (with adjacent pockets free): 160 mm Max. tool length: 300 mm Max. tool weight: 10 kg Njdpfsyvtt Njx Alkjla Tool type: HSK-A100 DIN 69893 Tools: 25 pcs Max. tool diameter: 100 mm Max. tool diameter (with adjacent pockets free): 160 mm Max. tool length: 450 mm Max. tool weight: 20 kg REQUIRED CONNECTIONS: Maximum installed power: 177 kVA Maximum current required: 235 A Machine equipped with: • Remote electronic handwheel Heidenhain HR550 • High-pressure water and air through spindle • Semi-automatic electrospindle change system, with HSK – A63 and HSK – A100 interface • Various tooling included • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioner • Cooling system for all axes and the electrospindle • Operating and maintenance manual and CE declaration of conformity

Kondisi: bekas, Tahun pembuatan: 2013, jam operasional: 14 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: TJ-350-20/40 KPSI //TJ-160-20/40 KPSI, lebar total: 1.500 mm, panjang total: 3.000 mm, tinggi total: 2.500 mm, tekanan: 2.800 batang, tekanan kerja: 2.800 batang, bahan bakar: diesel, berat keseluruhan: 3.000 kg, kecepatan rotasi (min.): 700 rpm, kecepatan rotasi (maks.): 1.500 rpm, panjang selang tekanan tinggi: 60.000 mm, tahun perombakan terakhir: 2025, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Full translation into English, context-adapted for technical buyers on industrial marketplaces: Bundle of 5 UHP water blasting units, including a large selection of spare parts and accessories as follows: 1 x High-pressure waterjet system powered by Deutz-MWM V-8 diesel engine. Continuously adjustable pressure from 0–1400 bar and 0–2800 bar, overflow/dump system, with interchangeable plunger kit as follows: - 1400 bar at 99 l/min - 2800 bar at 46 l/min The high-pressure head, sleeves, and valves remain the same for both 1400 and 2800 bar operations. Pressure changeover between 1400 and 2800 bar is achieved with a simple plunger exchange. This unit was built in 2013 and kept as a backup machine, however, it was only operated once for 14 hours at 2800 bar for a heat exchanger cleaning project. The UHP waterjet unit is mounted on a galvanized steel frame. The Deutz-MWM engine was purchased used with approx. 3,000 operating hours and equipped in 2013 with a new Jetech UHDW high-pressure pump. Included is a large quantity of accessories and spare parts, such as dump guns and foot valves, rotary joints, swivels, surface cleaners, rotating nozzles, high-pressure lances, nozzle inserts, seals, special tools, etc. An identical UHP waterjet system is also available, but powered by a Scania V-8 engine with 850 operating hours, max. 1400 bar / 99 l/min. This unit also has an interchangeable plunger kit for 1400 bar / 99 l/min and 2800 bar / 46 l/min. The unit is installed in a 20-foot container, equipped with an 800 l diesel tank, workbench, and vise. In addition, three more high-pressure waterjet systems with 110 kW each are available, two of which have interchangeable plunger kits for 1400 and 2800 bar operation. A third unit is a Kamat K11000 with 2800 bar operating pressure. Also available is a hydraulic heat exchanger cleaning system with a rotating lance, mounted on a scissor lift table, suitable for very large heat exchangers. All equipment is for sale due to company closure on account of retirement. Buyer sought for the complete package — machines and all accessories. For export only. Nodpfx Aloxc E Trjkjla

Kondisi: baik (bekas), Tahun pembuatan: 2012, nomor mesin/kendaraan: EC1-065-2500, Fungsionalitas: berfungsi sepenuhnya, Kami menawarkan ALTEC Maschinenbau Powerline 065 PowerLine PL-065 dalam kondisi baik = Mesin press/penglem, tahun pembuatan 2012. Nledpfx Aljyuvc Asksa

Tahun pembuatan: 1993, Kondisi: bekas, Nagema GM Arcade bottle washer, year of manufacture 1993, output 23,000 bottles/hour Type: Infeed machine Capacity: 21,000 bottles/hour Bottles per row: 16 bottles/row Power: 20 kW Current: 43 A Length: 8.64 m Width: 4.47 m Height: 1.92 m Formats: 0.5 l NRW bottle Equipment: Steam heating; fume extraction; insert screens, caustic collection basin Peripheral equipment: S5 control system (HMI Lauer) Weight: 17,900 kg Nsdovcqgzspfx Alksla

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, mesin pencuci kaca horizontal lebar kerja: 1300 mm ketebalan kaca: 3 - 35 mm dilengkapi penyesuaian tinggi kerja bermotor hingga 500 mm untuk perawatan ukuran kaca minimum: 250 x 150 mm jumlah sikat: 4 jumlah pisau udara: 4 kecepatan: 2 - 7 m/menit ukuran mesin (P x L x T): sekitar 4742 x 2570 x 1320 mm Nsdpjyu N Urefx Alksla

Tahun pembuatan: 2020, Kondisi: bekas, 1 Nsdoygiitepfx Alkjla

Kondisi: bekas, Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2600/016GR.2 W-4667, Washing machine Pero 2600 No. 2600/016GR.2 W-4667 Year of manufacture: 1991 Temperature washing and rinsing zone: 65-80°C Nsdew Dhqlspfx Alkola Simatic S5 control system

Kondisi: bekas, Vertical Multistage High-Pressure Centrifugal Pump GRUNDFOS As-new pump, but part of the magnetic coupling has been removed. Type: CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Nedpfjfupadox Alksla Performance at 7.2 bar: max. 10 m³/h Head: max. 91.8 meters Power supply: 400 Volt, 50 Hz Power: 3 kW - 9-stage pump construction - Made of stainless steel 1.4401 - The pump is as new and was used as a parts donor, but includes several new pump chambers - Part of the magnetic coupling is missing Suitable for drinking water supply, irrigation, and drainage Packed in original wooden crate Pump dimensions (LxWxH): 1100 x 250 x 300 mm Shipping crate dimensions (LxWxH): 1400 x 330 x 340 mm Weight with shipping crate: 85 kg As new condition Not a submersible or immersion pump.

Kondisi: bekas, 12-piece die block for GEWA press brake Nsdpfx Aswbvmijlkjla Press brake tool, lower die Type: 0255/14 Prism size: 16 mm for 90° Prism angle: 88° Die depth: approx. 8 mm Overall height: 120 mm Max. pressing capacity per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition