Beli Mesin Las bekas (79.507)

Tahun pembuatan: 2004, Kondisi: bekas, Mesin Las Hollinger 4-Titik Tipe ASP-L Codpfx Aaoylingodsra

Tahun pembuatan: 1999, Kondisi: sangat baik (bekas), lebar kerja: 620 mm, nomor mesin/kendaraan: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON Drive system: hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Usable heating element area: width 600 mm x depth 400 mm Maximum workpiece dimensions: - Maximum workpiece width: 620 mm - Maximum workpiece depth: 420 mm - Maximum workpiece height (top): 350 mm - Maximum workpiece height (bottom): 350 mm Crsdpfx Aajykvdlsdoa (combinations of part heights possible, depending on contour) - Maximum operating temperature for contact process: 400°C The machine’s modular frame construction enables easy conversions. Side doors and the front door in the welding area can be easily opened for quick tool change. The automatic safety lifting door provides high operational safety. The temperature controllers in the operator panel are equipped with actual/target displays. The operator interface uses a Siemens PLC control panel. Machine control is via Siemens PLC (S7-300). The heating elements are equipped with temperature sensors for temperature regulation and serve for safety shut-off in case of overheating. The pin systems in the tool clamping surfaces enable reproducible positioning of fixtures. Advantages of heating element welding technology: - Secure welding of workpieces with low or varying wall thicknesses. - Low reject rates due to precise and reproducible weld seams. - Precise timing, temperature control, and force settings allow even delicate components to be welded. - Nearly all thermoplastics can be welded with this process. - Various types of plastics can be welded together (compatibility must be checked). Technical Data: - Power supply: 3 x 400 V AC + N + PE - Power rating: 25 kVA - Rated current: 20 A - Required cable cross section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (door open) Machine weight: approx. 2.2 t

Tahun pembuatan: 2007, Kondisi: bekas, de_001 Crjdpfx Aecquugjadea

Kondisi: sangat baik (bekas), 2 - Mesin Las Kepala Urban AKS 4110 bekas Crodpfx Aaoykp Dxsdoa - Pisau Nirosta berpemanas atas - Pisau Nirosta berpemanas bawah - Batas garis las: 0,2 mm - Panjang pengelasan maks. 3,25 m - Satu set lengan penyangga

Kondisi: baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: T02172, Pabrikan: THERMATOOL Model: HF WELDER CFI 350 kW VF Tahun: 2014 Kondisi: Bekas Nomor stok: T02172 Credpfx Aoyid T Neadsa Daya keluaran: 350 kW Frekuensi pengelasan: 150 - 250 KHz Tegangan masuk: 400 VAC / 50 Hz Total daya terpasang: 525 kVA

Tahun pembuatan: 2025, jam operasional: 50 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, en-GB Csdpfx Aasykkx Dsdora

Kondisi: bekas, Tahun pembuatan: 2025, jam operasional: 200 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4 kopslasmachine Schtec, Perlengkapan: 4-dalam-1 sekop, Schtec Four-Head Welding and CNC Corner Cleaning Line for PVC Windows For sale: professional four-head welding machine with CNC corner cleaning from Schtec, suitable for the production of PVC windows and doors. This complete line is designed for serial production and is fully configured for the Dutch market using Deceuninck profile systems. As a result, the machine is immediately ready for operation within Dutch window production without any additional modification. Specifications and features: Four-head welding machine – simultaneous welding of four corners Codpfsykkw Tex Aadjra CNC-controlled corner cleaning unit – precise, clean finishing High dimensional accuracy and consistent welding quality Suitable for a wide range of window and door sizes Industrial-grade design for continuous operation User-friendly control system Configured for Deceuninck profiles (Dutch market) This machine is particularly suitable for companies looking to increase their production capacity or professionalize their current line. The combination of four-head welding and automatic CNC cleaning enables high output with minimal post-processing.

Kondisi: baik (bekas), - Kapasitas 100 kVA - Pneumatik - Jarak leher 570 mm Crjdpfsykcnqox Aadsa - 380 V

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, WMA WMP 08 Spot Welding Unit in TOP Condition This device shows hardly any signs of use and was only deployed very occasionally. Air-cooled one-hand spot welding unit for vehicle manufacturing, tank construction, steel cabinet production, sheet metalworking, and the wire industry - Trouble-free welding of all types of sheet metal - Galvanized sheets can be welded perfectly thanks to controlled current rise and drop - Air-cooled, but equipped for external water cooling - Tools can be easily changed via standardized rotary couplings Crjdpfsxrb Tgox Aadja - Single connection for welding current cable, control cable, and water cooling - Consistently reproducible welding results via built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Complete process monitoring - Simple, user-friendly operation - All set parameters and process values are visible at a glance - Welding parameters can only be changed by authorized personnel - Configuration and program settings management via central PC possible WMA WMS 108 Microprocessor Thyristor Control - 7 timing steps - 8 programs - Built-in device - Automatic mains frequency detection 50/60 Hz - Power failure-proof parameter storage - 'With/Without Current' switching at the press of a button Additional configuration parameters (locked for users): - Program selection - Step advance contact - Time for step advance - Two-hand lock (check) - Start signal lock - Current flow monitoring - Response threshold - Monitoring time - Power factor adjustment - Delay of 1st half-cycle External Inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke On - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be enabled or locked via configuration parameters. External Outputs (24V, DC unregulated ±20%; switching, max. 5 W): - Solenoid valve for pre-stroke - Solenoid valve for welding - Step advance relay - Ready-for-operation relay Shipping via freight forwarding can be arranged after consultation. #8407

Kondisi: baik (bekas), MERKLE Insquare W 300 AC/DC Welding Machine with original hose package Primary: Voltage: 3 x 400 V Frequency: 50 (60) Hz Power factor (cos phi): 0.95 TIG DC Range: Open-circuit voltage: 80 V Operating voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Duty cycle 100%: 260 A (at 40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A TIG AC Range: Open-circuit voltage: 80 V Operating voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Crjdpfxjl Sm Hbs Aadoa Duty cycle 100%: 260 A (at 40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A MMA Welding Mode: Stick electrodes: 1.5-6 mm Open-circuit voltage: 80 V Operating voltage: 20-32.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Duty cycle 100%: 260 A (at 40°C) Primary continuous power: 13.1 kVA Primary continuous current: 19 A Primary peak current: 22 A Welding processes: 10-step selector switch: TIG DC negative, TIG DC positive TIG DC neg. with start pulse TIG AC low-noise TIG AC rectangular TIG AC “Balanced TIG” Electrode negative Electrode positive Electrode “sine” Electrode rectangular Selector switch 1: 10-step switch: Current 1, Time 1 Up/down slope Start current, end current Ignition pulse, spot time Pre- and post-gas flow time Selector switch 2: 9-step switch: Current 2, Time 2 (for pulsed operation) AC balance, AC frequency Hot start time and current Current control Electrode diameter, voltage display Settings: 2 rotary encoders for selectors 1 and 2 Displays: 2 LED displays with preview and hold function for current, voltage, time, frequency Time functions: 4-position switch: OFF, slow pulse, fast pulse, spot welding Ignition: 4-position switch: OFF, high frequency, Lift-TIG Energy control: 4-position switch: on unit, hand or foot remote control, welding torch Operation modes: 4-position switch: 2-stroke, 4-stroke, 4-stroke with 2 currents, gas test, test, program Program memory: 20 freely assignable memory slots AC frequency: 50-200 Hz AC balance: 9-91% Pre-gas time: 0-3 s Post-gas time: 0-25 s Current up-slope: 0-2 s Current down-slope: 0-20 s Ignition pulse: 0-100 ms Spot time: 0.1-2.5 s Slow pulsing: 10 ms-2.5 s Fast pulsing: 50 Hz-5 kHz Hot start time: 0-1.5 s Hot start current: 10-200% Current moderation: 100-250% Button: Protective test function Button: Program selection LED: Power ON, overheating, fault, protective circuit, display hold, start current, ramp-up, current 1, current 2, ramp-down, end current Power source: IGBT inverter Ignition: High-frequency or Lift-TIG Standard: EN 60974-1 “S” / CE Torch connection: EURO central connector with 5-pin plug Torch cooling: recirculating water cooler Socket 50 mm²: Workpiece cable Socket 50 mm²: MMA cable Power supply: 4 x 4 mm² cable, 5 m long Gas hose: 2 m Weight: 130 kg (300 AC/DC) Dimensions (L x W x H): 910 x 600 x 910 mm with gas cylinder holder Gas cylinder holder: for 10, 20, or 50 l bottles Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles – new and used – can be found in our shop! International shipping costs on request!

Kondisi: baik (bekas), Tahun pembuatan: 2014, Tecna 3484 Universal Spot Welding System 8 kVA Universal welding station, 8 kVA, hand-operated gun, dual program. Simultaneous connection of two tools with automatic selection of the appropriate welding program, enabling time savings and error prevention for a simple and safe workflow. Bodywork repairs: Resistance spot welding of sheet metal, dent pulling with spotter (nails and washers), localized heating (carbon electrode), stud and rivet welding, dent removal in stainless steel sheets. Synchronous SCR welding control, adjustable welding time in cycles and pulses, adjustable welding current, and compensation function. Mains connection: 400V Line frequency: 50 / 60 Hz Cjdjl Smn Sjpfx Aadsra Fuse: 25 A Rated power at 50 % DC: 8 kVA Max. welding power: 35 kVA Max. secondary current: 6.4 kA Thermal current 100%: 0.88 kA Year of manufacture: 2014 Weight: 85 kg Financing through our bank is available. komplett-konzept.leasingo.de More new and used items can be found in our shop! International shipping costs on request!

Tahun pembuatan: 1999, Kondisi: sangat baik (bekas), Manufacturer year approx. 1980 Rated output at 50% duty cycle: 35 kVA Reach: 250 - 450 mm Working stroke: 40 mm Csdpfxjium Nio Aadjra Electrode force: 100 - 460 kp, infinitely adjustable Electrode force at 6 bar: 460 daN Operating air pressure: 2 to 6 bar Electrode arm diameter: 60 mm Electrode holder diameter: 30 mm Electrode insert taper: MK 2, Ø 17.78 mm Arm spacing: 200 / 400 mm Adjustability of electrode holder: 200 mm Connected load: 83 kVA Power supply: 380 Volt, 50 Hz - 4-cycle control - Infinitely variable power adjustment - Single spot and serial spot mode - Parallel electrode guidance - Water-cooled (without cooling unit) - Electric foot switch Weight: 300 kg

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, daya nominal pada siklus kerja 50%: 14 kVA, tegangan masuk: 380 V, jenis pendinginan: air, berat keseluruhan: 300 kg, daya pengelasan (maks.): 40 kVA, jarak lengan: 450 mm, lebar total: 450 mm, tinggi total: 1.450 mm, panjang total: 1.100 mm, panjang langkah: 110 mm, frekuensi input: 50 Hz, Spot Welding Machine Soudometal SP14P Maximum welding current at 50% duty cycle: 14 kVA Maximum welding power: 42 kVA Electrode force: 30–200 dAN Codpfswkr Inox Aadera Electrode stroke: 30–110 mm Throat depth: 450 mm Power supply: 380 V / 42 A Secondary current: Continuous current 1.85 kA; Short-circuit current: 12.5 kA Electrode force: 30–200 dAN Foot pedal control Cooling water flow: 3 l/min Electrode arm diameter: 45 mm Electrode holder diameter: 25 mm Machine weight: approx. 300 kg Dimensions: 1250 x 1100 x 450 mm If you require further information, we are at your disposal! Please feel free to contact us via the contact form or by phone. This listing was automatically translated. Translation errors may be possible.

Kondisi: bekas, Maximum form area (length, width) / mm Maximum positive draw depth / mm Maximum negative draw depth / mm Technical data: to follow shortly... Crodjwgi Sispfx Aadea

Tahun pembuatan: 1978, Kondisi: siap digunakan (bekas), Suitable for PVC films, working width: 940 mm, welding power: 42 kVA, welding area: 940 x 720 mm, throughput: 400 cycles/h, length: 8,000 mm. Crodpfxjqu Ubue Aadea

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Hub: 100 mm, max. electrode gap: 230 mm, electrode force: 20 kN, control system: Siemens S7-1500, comes with documentation, used only minimally. Cedpfx Aaolp N Eysdera

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), Outreach/reach: 550 mm, max. welding capacity: 136 kVA, length: 640 mm, width: 930 mm, height: 1,550 mm, weight: 290 kg. Crsdpfx Aajk N Dmvjdja

Tahun pembuatan: 2010, Kondisi: siap digunakan (bekas), Electrode force: 100 daN, welding power: 255 kVA, rated power: 80 kVA, with DALEX DRF 5.2 cooling system. Cjdpjiknv Esfx Aadjra

Kondisi: siap digunakan (bekas), Tersedia dua mesin yang identik, termasuk dokumentasi. Crjdpfx Asm Rg R Aoadja

Kondisi: bekas, Selling various small machines from old inventory. The following machines are available: - Welding machines - Grooving machines - Riveting machines - Punching machines - Pumps The photos represent only a small selection. Codjrn Syxjpfx Aadora

Tahun pembuatan: 2023, Kondisi: bekas, Kami menawarkan mesin las ultrasonik Weber Ultrasonics Saphir Digital Manual Station bekas ini, tahun produksi 2023. Dengan mesin ini, sekitar 92.500 unit telah diproduksi. Cjdpfx Asyimqwjadsra Sonotrode TR35Ti Frekuensi: 35kHz Daya: 1000W 230V AC Sistem pengukur jalur: 26,88 mm Gaya minimum: 34 N Gaya maksimum: 500 N Low Level: 0 N Low Offset: 0 N Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan kepada kami atau hubungi kami.

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), Fröhlich SAX 700 corner weld seam welding machine, welding processes: MIG/MAG/TIG, max. weld seam length: 700mm, max. welding angle: 180°, welding speed: 2500mm/min, material thickness: 0.8mm–6mm, materials: steel/stainless steel, machine dimensions (X/Y/Z): approx. 800mm/1000mm/1800mm. Migatronic Automig 273i welding machine, fuse: 10A, max. power consumption: 9.1kVA, idle power: 20W, efficiency: 88%, power factor: 0.93, current range: 10A–270A, machine dimensions (X/Y/Z): approx. 550mm/250mm/650mm, weight: approx. 30kg. Documentation available. On-site inspection possible. Crjdpfx Aou Izq Soadea

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), rotox_4k_hegeszto_ablakgyartashoz Codpfxsxvru Ne Aadera

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), resistance_spot_welding_machine_pei_tech_specs Cjdpfox A Hhkjx Aadera

Kondisi: siap digunakan (bekas), Tersedia mesin las Pfaff termasuk gunting rol Kuris dan alat pemutar gulungan MK. 1) Mesin las Pfaff 8309. 2) Gunting rol Kuris BOM 101. 3) Alat pemutar gulungan MK Nähtechnische Systeme. Dokumentasi tersedia. Inspeksi di lokasi dimungkinkan. Instalasi sudah dibongkar dan siap untuk dimuat. Crodpfxow I E Dij Aadsa