Beli Mesin Penggilingan Portal bekas (80.566)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, x-travel 2500 mm y-travel 3000 mm z-travel 1250 mm Control HEIDENHAIN iTNC 530 Spindle speed 22000 rpm Tool holder HSK A-63 Spindle motor 60 kW Swiveling spindle head +/- 110° C-axis 360° Tool changer 50 positions Table size (longitudinal) 2500 mm Table size (crosswise) 3250 mm Coolant system 40 bar Machine weight approx. 60 t Space requirement approx. 7.6 x 7.3 x 5.7 m This ZIMMERMANN FZ33c is in very good condition. The machine is available immediately. Description: Technical specifications of the unit and working ranges X-axis 2500 mm Y-axis 3000 mm Z-axis 1250 mm A-axis ±110° C-axis ±300° Includes vibration sensor Includes bearing temperature sensor Includes rotary union for internal coolant supply (IKZ) 5-axis path control: Heidenhain iTNC 530 / handwheel HR520, 15" TFT color display Extraction system Keller Vario P1 Machine enclosure roof 50-position tool changer, chain magazine, located at the rear of the machine Chip conveyor, 60° left discharge, at the end face Probe Renishaw RMP60 Kdodpfx Aajwlvrmoyow Blum laser tool measurement "Control NT-Micro" Clamping table: Length x width x height 2500 x 3250 x 400 mm Table load capacity 8000 kg/m² (max. 16000 kg) T-slots, longitudinal 18H12 T-slot spacing 250 mm Dimensions, weights Installation area (without peripherals) approx. 7600 x 7300 x 5650 mm Total weight approx. 53500 kg Electrical connection values Voltage (three-phase) 400 V Frequency 50 Hz Fuse as per installation plans Power requirement as per installation plans Compressed air connection (by customer) Required air pressure 6 bar Average air consumption approx. 15 m³/h (depending on machine equipment) Drives Linear axes Rapid traverse X, Y, Z axes 60 m/min Axis acceleration X, Y, Z axes up to 5 m/s² Drives Rotary axes – VH30 Rapid traverse A, C axes 360°/s Axis acceleration A, C axes 700°/s² Resolution A, C axes 0.0001° Accuracy Linear axes – according to VDI / DGQ 3441 Positioning accuracy X-axis P = 0.026 mm Y-axis P = 0.028 mm Z-axis P = 0.020 mm Repeatability X-axis Ps = 0.015 mm Y-axis Ps = 0.016 mm Z-axis Ps = 0.010 mm Measuring system resolution (interpolated) A, C axes 0.0001° Accuracy Rotary axes – VH30 Positioning accuracy A, C axes P = 12" = 0.0033° Repeatability A, C axes Ps = 8" = 0.0022° Milling head VH30 2-axis milling head: VH30, Milling spindle Siemens Weiss Spindle power S1 (100% duty cycle) 60 kW, Spindle speed 22,000 rpm, 95 Nm, HSK-A63 Dimensions of fork head L x W approx. 500 x 600 mm Nominal torque rotary axes (closed loop) A: min. 1200 Nm C: min. 1047 Nm Clamped A and C axes: 3000 Nm (Permanent grease lubrication with automatic re-lubrication system) Swivel axis – spindle nose 326 mm Tool holder HSK 63 A Tool clamping Spring clamp Tool unclamping Hydraulic Permissible tool weight 4.5 kg (manufacturer specification) Coolant supply External and internal Coolant/lubricant supply (emulsion) at the face end of the milling spindle with belt filter system Capacity 1500 l Pump 1: 40 l/min at 20 bar Pump 2: 20 l/min at 40 bar Blow-off air at the face end of the milling spindle

Kondisi: bekas, Tahun pembuatan: 2018, Looking for a gantry milling machine? With X-travel from 2 to 15 meters, Y-travel up to 4 meters, and Z-travel up to 2 meters, we offer you a versatile selection of machines for various machining requirements. Whether CNC universal heads, W-axis, rotary tables, tool changers, or controls from renowned manufacturers like Siemens, Fanuc, and Heidenhain – our extensive range of accessories ensures you maximum flexibility and efficiency. Have a look at the PDF catalog below! Discover the ultimate precision and robustness of our refurbished CORREA gantry milling machines, carefully overhauled by our experts in Spain. These machines have been inspected to the highest standards and guarantee you premium machining quality. A standout example is our in-stock pre-owned CNC gantry milling machine VM 2018, equipped with the proven Heidenhain control system. With impressive performance data and detailed technical features, this machine offers everything you need for precise and efficient machining. x-travel: 2300 mm y-travel: 2000 mm z-travel: 1000 mm table size: 2300 x 1600 mm T-slots (width x pitch x quantity): 8 x 22 x 180 mm max. table load: 8 t distance between columns: 1840 mm distance spindle nose to table: 180~1180 mm spindle motor: 22/46 kW torque at spindle: 140.1/286.5 Nm (S6-25%) spindle taper: SK 50 spindle speed: 10000 rpm (direct drive) rapid traverse X,Y: 20000 mm/min rapid traverse Z: 15000 mm/min milling feed range: 1~10000 mm/min machine dimensions (LxWxH): 7027 x 5217 x 4339 mm total power requirement: 60 kVA machine weight approx.: 25 t CNC control: Heidenhain TNC 620 chip conveyor with chip bin: 2 spiral, 1 hinged belt IKZ: 20 bar CE-compliant: certified by TÜV Used CNC gantry milling machine with HEIDENHAIN 620 TNC control and extensive accessories, featuring: - Monoblock cast-iron machine bed and monoblock crossbeam for maximum rigidity and precise machining results. - Complete structure analyzed by FEM to optimize rigidity and precision. - P-class linear guide feed rollers allow maximum loading with a low coefficient of friction (0.003–0.006). They ensure smooth operation thanks to optimized roller circulation and guidance, which also reduces energy consumption. - Double-nut C3 ball screws guarantee precise milling even under heavy loads. - Direct drive spindle with 10,000 rpm and SK50 tool holder. - Spindle motor power 22/46 kW (S6-25%). (22 kW continuous, 46 kW up to 30 min overload). - Spindle torque 140.1/286.5 (S6-25%) Nm. Kdsdpfohx R Dkox Aayow - Two spiral conveyors and one chain chip conveyor for efficient chip removal. All essential components from well-known European manufacturers, ensuring reliable, short-term, and long-term spare parts availability. Don't miss the chance to optimize your production processes and invest in premium milling technology. Experience the difference our gantry milling machines make – reliable, durable, and ready to tackle your most demanding tasks. Contact us today for expert advice. Other machines in stock on request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, jam operasional spindle: 4.486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping table Clamping area: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X-, Y-, Z-axis: up to 1.5 m/s² Connection data Connected load: 40 kW Pre-fuse: approx. 80 A Kdedpfow Au H Rjx Aaysw Dimensions, weights Space requirement (machine with peripherals): approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Fully functional, very good condition. Dismantled and stored, immediately available.

Kondisi: baru, Tahun pembuatan: 2023, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 4.000 mm, jarak gerak sumbu Z: 1.500 mm, (Distance between machine columns 3,520 mm) Z-axis: 1,500 mm Heidenhain control system Water-cooled inline motor 43 kW / 900 Nm Automatically indexing milling head 6,000 rpm / 2 levels, 90°|45° / 0.001° x 0.001° Kdedpeqrq Emsfx Aayjw Three-sided safety enclosure Electronic handwheel 2 x chip conveyors 60-position tool changer

Kondisi: bekas, x-travel 11,000 mm y-travel 3,000 mm z-travel 1,300 mm Ram diameter 300 mm Clear width 3,270 mm Clear height 1,500 mm Clamping area 11,000 x 3,000 mm Spindle speed: 600 rpm Tool holder SK ISO 60 Spindle diameter 200 mm Power requirement 125 kW Feeds X-axis 0 - 20 m/min Feeds Y-axis 0 - 2 m/min Rapid traverse - portal in x 0 - 20 m/min Rapid traverse - portal in y 0 - 2 m/min Converted planing machine Control: automatic linear milling cycle Kedpjw Ahxtjfx Aayodw Standard angle head

Kondisi: bekas, Tahun pembuatan: 2014, X-axis: 1250 mm, Y-axis: 1280 mm, Z-axis: 150 mm, max. feed rate: 15 m/min, repeatability: 0.01 mm, spindle speed: 0–24,000 rpm, software: VCarve Pro, data formats: HPGL-3D / G-Code, spindle power: 6.5 kW, control: Siemens Sinumerik 808D Milling, weight: 1.2 t, with collet spindle, phenolic vacuum high-pressure table, 850 W Yaskawa servo motors, steel machine base, precision ball screws on all axes, X-axis with dual drive, linear guides, protective covers for all drive axes, extraction shoe for chip extraction, automatic mist cooling and material sensor. Kodowqd Rhspfx Aaysdw

Kondisi: baru, Portal machine – the space miracle! CNC gantry milling machine for large travel distances with minimal footprint! ADVANTAGES: • Optimal use of space, completely unobstructed clamping area on the table • Superior chip protection thanks to top-mounted axes • Especially suitable for tall and bulky components FEATURES: - Gantry function on Y-axis (synchronized via ProNC software) - CAN bus system with EC servo motors on all axes - Backlash-free set steel ballscrew drives with steel linear guides - T-slot table for easy clamping of workpieces and accessories - Clamping area from 1100x1000 to 1750x2000 mm - Variable clearance from 340 mm to 590 mm - Spindle motors iSA 500 / 750 / 1500 / 1500L as well as iSA 900 / 1500W / 1500WL / 2200 - Speed: up to 250 mm/sec possible - PILZ safety technology - Effortless operation via height-adjustable CNC panel - Network-capable control PC with WINDOWS - Parallel sliding door - Workpiece clamping via T-slot plate - Variable gantry clearances depending on customer application DESIGN: Gantry: moving, Table: fixed APPLICATIONS: • Machining • Measuring and inspecting • Dispensing applications SUITABLE FOR PROCESSING: • Aluminium / Light metals • machinable plastics • Ceramics • Non-ferrous metals (brass, bronze, etc.) • Plastics • Wood Optimal use of space with the smallest possible footprint. Ksdpjhqhlvefx Aaysdw Limited space but require maximum travel? We have the answer. Our Overhead machine series offers maximum travels on a compact footprint. All drives are mounted on the upper part of the machine, keeping the machine table completely free for your individual applications. With a wide range of variable features and additional options, the CNC machine can be optimally configured for many industries and applications. In addition to machining, the OverHead Gantry M is also ideal for measuring, inspection, and dispensing tasks. With spindle power up to 2.2 kW, 20,000 rpm, and travel speeds up to 250 mm/sec, it is suitable for woodworking and plastics as well as for light alloys and non-ferrous metals. The unobstructed working area and excellent price/performance ratio offer decisive advantages over comparable products. The OverHead Gantry M is available in five sizes for various travel ranges from M20 to M50. Need the control cabinet on the right side or prefer the control unit on the left? No problem—we are happy to accommodate your requests and naturally take care of maintenance and support for your OverHead Gantry M. Our service technicians are available by phone and can be quickly on-site if required. We also offer our in-house software isy-CAM 2.8 and can provide advice tailored to your specific application. Many options available on request!

Kondisi: bekas, Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Angular milling head - Manufacturer: Waldrich Siegen Kdjdpfx Aasrfw R Heysw - Model: ET500 - Reference no.: 11290/731

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Commissioning: 2014 Control System: Heidenhain iTNC 530 HSCI incl. HR 520 electronic handwheel Machine Hours Power-on time: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Axis Travel X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping Table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-Axis Milling Head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear Axis Drives Feed rate X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Kodjwywciepfx Aayodw Electrical Data Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, Weights Space requirement with peripherals: approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply system with belt filter unit - 50-position chain-type tool magazine - Work area enclosure - Chip conveyor - LTA emulsion mist extraction system Optional at extra cost: - Renishaw RMP60 wireless touch probe - BLUM Control NT Condition of the Machine Fully functional, in very good condition, and still under power for inspection! Images are for illustration purposes and depict a new machine of this type. Original pictures to follow shortly!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, jam operasional: 12.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 5645, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 4.000 mm, jarak gerak sumbu Z: 1.600 mm, kecepatan pemakanan sumbu X: 25.000 m/menit, laju pemakanan gandar Y: 25.000 m/menit, laju pemakanan sumbu Z: 25.000 m/menit, panjang total: 6.550 mm, panjang meja: 2.500 mm, lebar meja: 2.500 mm, lebar total: 15.900 mm, kecepatan spindel (maks.): 4.000 rpm, tinggi total: 11.500 mm, berat keseluruhan: 57.000 kg, jangkauan kerja: 2.500 mm, daya motor spindle penggiling: 46.000 W, Dear Sir or Madam, Kdedpfxjttri Tj Aayow We hereby offer our portal bed milling machine for sale. The machine was installed in winter 2019/2020 and has logged 12,000 operating hours. Price information is available upon request. The machine is currently still in operation. The stated price pertains exclusively to the machine itself. Disassembly, transport, and installation are the responsibility of the buyer. We look forward to receiving serious inquiries. Thank you in advance.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, jam operasional: 3.944 h, Fungsionalitas: berfungsi sepenuhnya, Control system NCT304 (touch screen, USB, 19-inch monitor) Table dimensions: 2000 x 1400 mm Number of T-slots x dimensions x spacing: 9 x 22 x 160 mm Max. table load: 6000 kg Distance spindle nose to table surface: 200 - 1000 mm Distance between columns: 1650 mm Positioning accuracy: < 0.02 mm Repeat accuracy: < 0.008 mm X / Y guideways: cylindrical roller, 2 / 2 Z guideway: flat guideway X travel: 2100 mm Y travel: 1500 mm Z travel: 1000 mm X / Y / Z rapid traverse: 20 / 20 / 15 m/min Feed rate: 15 m/min Spindle speed: 10,000 rpm Taper: SK50 Direct drive system Number of speed ranges: 2 Drive power: 22 kW Magazine: 30-position (with change arm) Max. tool length: 400 mm Max. tool diameter: 125 (215) mm Max. tool weight: 20 kg Space requirement (LxWxH): 6000 x 4600 x 4200 mm Weight: 23,500 kg Accessories / Equipment Kdjdpfxotr E A Uj Aayjw - ICS (internal coolant supply) - Coolant system - Chip conveyor - Angle head (manual adjustment) - Arm-type tool changer - Work lighting - Rinsing gun - Manuals The machine is in very good, almost as-new condition. Immediately available, still under power.

Kondisi: baik (bekas), Tahun pembuatan: 2003, jarak pergerakan sumbu X: 13.000 mm, jarak lintasan sumbu Y: 4.500 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan spindel (maks.): 30.000 rpm, jarak antara penyangga: 6.500 mm, hidung spindel: HSK A63, Achsenwege: X-Achse: 13.000 mm, Y-Achse: 4.500 mm, Z-Achse: 1.000 mm Abstand zwischen den Ständern: 6.500 mm Schwenkachsen: C-Achse: 190°, A-Achse: 110° Eilgang (XYZ): 15.000 mm/min Eilgang (AC-Achse): 10 U/min CNC-Steuerung: Siemens 840D Spindelaufnahme: HSK A63 Spindeldrehzahl: 30.000 U/min Kdodjtt I Sfopfx Aayjw Spindelleistung: 20 kW Werkzeugwechsler: 20 Plätze Torrestool-Spannvorrichtungen: 16 Stück Verfahrwege Torrestool-Tisch: X-Achse: 11.500 mm, Y-Achse: 3.500 mm, Z-Achse: 750 mm Herkunftsland: Spanien Maschinenabmessungen (LxBxH): 19.000 x 11.000 x 6.770 mm Maschinengewicht: 70.000 kg Die Torresmill Gantry ist eine 5-Achs-CNC-Fräs- und Bohrmaschine, die speziell für die Bearbeitung von Luftfahrtmaterialien (Verbundwerkstoffe, Aluminium, Titan, Stahl, ...) entwickelt wurde. Die Torresmill Gantry lässt sich optimal mit dem Torrestool-Universalspannsystem kombinieren und garantiert so maximale Flexibilität und reduzierte Prozesszeiten.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, A used CNC gantry milling machine with C-axis for turning operations (CNC turning, CNC milling, and angle head machining). Boring mill operations! Hirth gearing! TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Table diameter: 2,500 mm Max. turning diameter: 3,000 mm Max. turning height: 1,000 mm Machine: Uniport 6000 Boring mill operations, including CNC turning, CNC milling, and angle head machining. All operations can be performed in a single setup, combined with the speed and precision of a CNC gantry milling machine. TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Dimensions Kdodevvh R Djpfx Aaysw Table diameter: 2,500 mm & 2,000 mm Max. turning diameter: 3,000 mm & 2,500 mm Max. turning height: 1,000 mm C-axis for turning operations Original price: €1.8 million Disassembly: by arrangement The machine comes with a protective cover to prevent chips from entering the Hirth gearing on the ram during milling operations. Also included are: a turning attachment head for turning tools and an angle head for side machining on the plate field or rotary table. The angle head can be swiveled in 2.5° increments via the Hirth gearing. All tool holders (milling, turning, angle head) are clamped via HSK-100. A wireless touch probe from M&H (Hexagon) for measurement and workpiece zero-point setting is included. The machine is in operation and can be inspected onsite by appointment. A video of the machine is available.

Kondisi: bekas, Tahun pembuatan: 1998, x-travel 6000 mm y-travel 4000 mm z-travel 1250 mm w-axis 1500 mm Control Fidia Max. workpiece weight 60,000 kg Control for tool magazine/tool changer: Siemens Spindle speed 6.3 - 4,000 rpm Clamping surface 2500 x 4500 mm Magazine capacity 48 pcs. Tool holder SK50 Clearance between uprights 3700 mm Kdsdpfxeu I E Emj Aayew Rapid traverse 30,000 m/min Total power requirement 63 kW Machine weight approx. 150 t Space requirement approx. 16.8 x 10.3 x 7.9 m

Kondisi: baru, Tahun pembuatan: 2024, jam operasional: 50 h, nomor mesin/kendaraan: 305, Available: February 2023 Control system: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping Table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with crosswise T-slots every 250 mm Max. load: 1,000 kg distributed over the entire surface 2-Axis Milling Head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 rpm Torque: 15.3 Nm Kdsdpfswwq Hcjx Aayow Tool holder: HSK 63F Tool release: pneumatic Blow air / MQL: external Linear Axis Drives Feed rate X and Y-axis: up to 50 m/min Feed rate Z-axis: up to 30 m/min Color Enclosure, gantry, control cabinet: light gray Z-slide and milling head: orange Additional Equipment - 15-position tool changer - Control unit in separate, mobile console

Kondisi: bekas, Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 550 mm, jarak gerak sumbu Z: 500 mm, For sale is a portal machining center from the brand Deckel Mori, model 70 V. The machining center is immediately ready for operation and fully functional. Technical data: Year of manufacture: 1997 Control: Grundig Dialog 112 X travel: 700 mm Y travel: 550 mm Z travel: 500 mm Table: 900 x 550 mm Max. load: 800 kg Feed rate (X, Y, Z): 10 m/min Rapid traverse (X, Y): 30 m/min Rapid traverse (Z): 20 m/min Spindle clamping: Hydraulic Taper: SK 40 Max. speed: 15,000 rpm Tool magazine: 30 slots Max. tool diameter: 80 mm Max. tool length: 300 mm Max. tool weight: 12 kg Tool changer: Vertical double gripper Tool measuring system: Blum 3D probe: Renishaw OMP 60 Coolant system: IKZ Knoll RF 200/1100 F60-1 Space requirement: 3530 x 3300 mm Transport dimensions: 2.4 x 3.8 x 3 m (machine only) Weight: approx. 7,000 kg Transport and loading can be organized throughout Europe upon request and at an additional charge. All prices are subject to VAT. Viewing is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Kdsdpfxjv T U T To Aayow Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Kondisi: siap digunakan (bekas), Travel distance X/Y/Z: 10,500 mm / 3,500 mm / 2,800 mm, Clearance width: 3,515 mm, Max. clearance height: 2,500 mm, Table dimensions X/Y: 13,000 mm / 3,000 mm, Spindle speed: 700 rpm, Drive power (renewed in 2025): 110 kW. Machine dimensions X/Y: approx. 28,300 mm / 10,200 mm, Control: Mitsubishi E300 1.1x, Software update: planned for 2025. Includes belt sanding unit, chip conveyor, chip extraction, various cutter heads, tool holders, disc milling cutters and face milling heads, support blocks, clamping straps, and currently dismantled counterweights. Documentation available. On-site inspection possible. Kdjdpfjw Exttox Aaysw

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 3.551 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0345, jarak pergerakan sumbu X: 3.200 mm, jarak lintasan sumbu Y: 2.600 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan spindel (maks.): 4.500 rpm, jumlah slot dalam magazin alat: 60, Machine powered at least until 05.06.2025 No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 3,200 mm Travel Y-axis: 2,600 mm Travel Z-axis: 1,000 mm Spindle nose – table distance: 150 – 1,150 mm Table – gantry clearance: 2,800 mm CNC Control: HEIDENHAIN iTNC 640 Table Table dimensions: 3,000 x 2,400 mm T-slots: 28 x 13 x 180 mm Table load capacity: 11,000 kg Spindle and feed Max. spindle speed: 4,500 rpm Tool holder: BT 50 Feed rate X/Y axis: 15 m/min Feed rate Z axis: 12 m/min Rapid traverse X axis: 7 m/min Rapid traverse Y axis: 7 m/min Rapid traverse Z axis: 7 m/min Positioning accuracy: ±0.005 mm over 300 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 60 Hz Connected load: 65 kVA Total length: 9,000 mm Total width: 8,000 mm Overall height: 5,500 mm Power-on hours: 11,498 h Program run time: 5,585 h Spindle hours: 3,551 h Axis feed hours: 3,945 h EQUIPMENT - 60-station tool changer incl. BT 50 tool holders - 4th axis by DETRON - Coolant system - Chip conveyor - HEIDENHAIN iTNC 640 control Kdodpfxewm E S Se Aayow

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Heyligenstaedt Heynumill 2700-PF 3/5-axis CNC gantry milling machine with integrated C-axis and interchangeable milling heads. Heidenhain TNC 430 control system X-axis Y-axis Z-axis 3,000 mm 4,000 mm 1,500 mm In 2018, the Heynumill underwent a complete hydraulic overhaul, all electrical cables were replaced, the spindle chiller unit as well as both longitudinal conveyors were renewed, and the heads were fully refurbished. The entire refurbishment cost €160,000. Kedowthz Aspfx Aayedw In 2020, the milling gearbox was replaced. For further technical details, please refer to the PDF file.

Kondisi: bekas, Tahun pembuatan: 2001, translation_001 Ksdpjuddhcsfx Aayedw

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Commissioned: 2013 Control: Heidenhain iTNC 530 including HR 520 handwheel Machine Hours Power-on hours: approx. 40,700 h Spindle hours: approx. 17,100 h Spindle hours, current milling spindle: approx. 150 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool interface: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Feed rate X/Y/Z axis: up to 60 m/min Axis acceleration X/Y/Z axis: up to 5 m/s² The machine is currently set to the following basic values due to limited available power supply on site: Feed rate X/Y axis: up to 40 m/min Feed rate Z axis: up to 30 m/min Axis acceleration X/Y/Z axis: up to 2.5 m/s² Power data Connected load: 190 kVa Main fuse: approx. 315 A The machine can be reset to original values at any time if sufficient power supply is available. Current reduced connection values: Connected load: 130 kVa Main fuse: approx. 250 A Dimensions, weights Space requirement with peripherals: approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Color Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filtration unit - 50-position chain tool changer Kedowa T Hkopfx Aayjdw - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra charge: - Renishaw RMP60 radio probing system - BLUM Control NT Condition of the machine Fully functional, in very good condition. Already dismantled and in storage.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, A used CNC gantry milling machine with carousel turning unit / C-axis for turning operations Hirth serration TRAVELS X: 3,000 mm Y: 2,500 mm Z: 1,000 mm Table diameter: 2,000 mm Max. turning diameter: 2,500 mm Max. turning height: 1,000 mm Machine: Uniport 6000 Boring mill operations, as well as CNC turning, CNC milling, and angle head machining—all in a single setup, combined with the speed and precision of a CNC gantry milling machine. C-axis for turning operations Original price: €1.8 million Dismantling: by arrangement The machine comes with a protective cover to prevent chips from entering the Hirth serration on the ram during milling operations. Includes the turning head for turning tools and an angle head for lateral machining on the flat table or rotary table. Both heads can be indexed in 2.5° increments via the Hirth serration. All tool holders (milling, turning, angle head) use HSK-100 clamping. Kdedpfxjvvh T Se Aayjw An M&H (Hexagon) wireless measuring probe for measurement and zero point setting is included with the machine. The machine is in operation and can be inspected on site by appointment. A video of the machine is available.

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 306, en-001 Kdsdsvy Dugopfx Aayew

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, First commissioning: 2012 Control: Heidenhain iTNC 530 incl. HR 420 handwheel Travel: X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,500 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 5,700 x 3,000 x 300 mm 2-axis milling head VH20 Spindle power: 40 kW Spindle speed: max. 25,000 rpm Torque: 48 Nm Tool holder: HSK 63A Tool unclamping: hydraulic Coolant supply: external and internal Blow air: external Drives for linear axes Feed rate X, Y-axis: up to 50 m/min Feed rate Z-axis: up to 30 m/min Axis acceleration X, Y, Z-axis: up to 2.5 m/s² Connection data Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement machine incl. peripherals: approx. 10,000 x 7,700 x 5,850 mm Total weight: approx. 63,000 kg Kdsdpfx Aaovy A Tnsyjw Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Additional equipment - Coolant supply with belt filter system - 30-position chain-type tool changer - Work area enclosure - Chip conveyor, right side Optionally available at extra cost: - BLUM laser Condition of the machine Fully functional, excellent condition. Already disassembled and stored.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Commissioned: 2013 Control System: Heidenhain iTNC 530 incl. HR 520 handwheel X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ±110° C-axis: ±300° Clamping Table Clamping surface: approx. 2,500 x 3,250 x 400 mm Kjdovy A Tbepfx Aayodw 2-Axis Milling Head VH20 Spindle power: 45 kW Spindle speed: max. 25,000 rpm Torque: 67 Nm Tool interface: HSK 63A Tool clamping: Hydraulic Coolant supply: External and internal Blow air: External Drives (Linear Axes) Rapid traverse speed X, Y, Z axes: up to 60 m/min Axis acceleration X, Y, Z axes: up to 5 m/s² Connection Data Connected load: 180 kVa Main fuse: approx. 290 A Dimensions, Weights Space requirement (machine with peripherals): approx. 10,000 x 9,000 x 5,650 mm Total weight: approx. 55,000 kg Colour Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional Equipment - Coolant supply with band filter system - 50-slot chain-type tool changer - Work area enclosure - Chip conveyor - LTA emulsion mist extraction unit Optional, at extra cost: - Renishaw RMP60 wireless probing system - Heidenhain remote diagnostics Condition of the machine Fully operational, in very good condition. Already dismantled and stored.