Beli Mesin Spot Welding bekas (81.467)

Kondisi: baru, Tahun pembuatan: 2025, Nominal power at 50% duty cycle: 20 kVA Short-circuit current: 15 kA Electrode force: 420 daN Throat depth: 130-500 mm --- Welding control: RS 17 (5-phase, 2-program) --- Including additional options: - Double foot switch "currentless positioning" Fsdpfx Adswfxw Esgsft - Straight arm --- Warranty: 12 months --- Training & commissioning available on request --- Spot welding electrodes & spare parts available from stock --- Further information available on our website: wahlenmeier.de

Kondisi: bekas, Tahun pembuatan: 1990, Fungsionalitas: belum diuji, nomor mesin/kendaraan: Telex: 520134, 8008 CM Art. item / Year: 06-01/90, 50 Hz, 380 V, 100 KVA at 50%, 250 KVA, 8200 Amps at 100%, 36,000 Amps short circuit, 710 daN pressure, 300 l/h H2O water cooling - Made in Italy The spot welding machine was used weekly around 10 years ago and was fully operational at that time. The machine can be connected at any time and inspected by qualified personnel of the potential buyer using the product to be manufactured in the future. The machine can be collected at its current location – as is – without warranty or additional services for €2,800 negotiable, or shipped at extra cost. Alternatively, we can have the machine inspected by external experts, in which case the price will be approximately €4,500. Fjdpfx Aju Atl Dsdgjft

Kondisi: sangat baik (bekas), Pneumatically operated, water-cooled 3-phase direct current spot welding machine Manufacturer: DALEX Model: PMS 11-4 G3 Arm reach: 650 mm with special cylinder for low pressure range from 20–120 daN Rated power at 50% duty cycle: 60 kVA Secondary short-circuit current: 25 kA Secondary open-circuit voltage: 3.68 V Equipped with control cabinet mounted according to VDE 0100 Main disconnect switch Synchronous welding controller 8036 Weight: 685 kg Ffodpfx Aju A Dg Esdgot

Kondisi: baik (bekas), Tahun pembuatan: 2021, jenis arus masuk: tiga fasa, kedalaman tenggorokan: 430 mm, daya nominal pada siklus kerja 50%: 88 kVA, jenis pendinginan: air, berat keseluruhan: 279 kg, Electrode holder and electrodes, water-cooled Water-cooled electrode arms and transformer Welding control with graphic display Medium frequency inverter technology Welding control unit PY800 Electrode force: 525 daN Electrode stroke: 60 mm Water requirement: 9 l/min Fedsw D Rtpjpfx Adgoft

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: JO 4901210, The flagship model of the multiSpot line for all materials. TIG and pulse welding for steel, TIG welding with special features for aluminum and bronze. For further information, see the nameplate. This welding unit is being sold due to non-use. Very good condition. Extensive range of accessories included. Can be tested by appointment. Fsdov Rbz Ejpfx Adgoft

Kondisi: bekas, daya nominal pada siklus kerja 50%: 25 kVA, - Capacity: 25 kVA Fjdpfx Adevkklajgsft - Pneumatic - Timer - Clearance: 560 mm - Arms are adjustable in both straight and angled positions - Lower arm is height-adjustable - 380V

Kondisi: baik (bekas), Tahun pembuatan: 2014, Tecna 3484 Universal Spot Welding Machine 8 kVA Universal welding station, 8 kVA, hand-operated gun, dual program. Simultaneous connection of two tools with automatic selection of the corresponding welding program, saving time and avoiding errors for a simple and safe workflow. Ffsdpfx Adjl Smn Sjgjt Bodywork repairs: resistance spot welding of sheet metal, dent removal with spotter (pins and washers), local heating (carbon electrode), screw and rivet welding, dent removal on stainless steel sheets. Synchronous SCR welding control, adjustable welding time in cycles and pulses, adjustable welding current and compensation function. Mains connection: 400V Mains frequency: 50 / 60 Hz Fuse: 25 A Rated output at 50% duty cycle: 8 kVA Max. welding output: 35 kVA Max. secondary current: 6.4 kA Thermal current 100%: 0.88 kA Year of manufacture: 2014 Weight: 85 kg We offer more items – both new and used – in our shop! International shipping costs on request!

Kondisi: baru, Tahun pembuatan: 2022, Maximum power: 13 kW Throat depth: 120 mm Maximum pressing force: 120 kp Fjdpfx Adsugawrjgoft Power supply voltage: 400 V Open-circuit voltage: 2.5 V Output current: 6300 A Welding capacity: 2 x 2 mm sheet metal Thermal protection: 25 A Total power requirement: 13 kW Machine weight: approx. 0.012 t Space requirement: approx. 0.5 x 0.1 x 0.2 m Handheld spot welding machine with 2 sets of welding electrodes

Kondisi: baik (bekas), Projection welding machine Manufacturer: DALEX Model: PMS 16-1 Throat depth: 350 mm Rated power at 50% duty cycle: 250 kVA Secondary short-circuit current: 110 kA Secondary open-circuit voltage: 12.5 V Ffodpfxeubdato Adgot Electrode force: 340-2,040 daN Equipped with double-stroke cylinder and approach stroke With synchronous welding control 5/36 TT Weight: 988 kg Function-tested Machine is currently being overhauled

Kondisi: baik (bekas), daya nominal pada siklus kerja 50%: 8 kVA, - Capacity: 8 kVA - Timer Ffodpfx Adsvbr Dlsget - 380V

Kondisi: baik (bekas), Peco welding system spot welding machine Peco welding system for welding flat strip and electrical conductors Peco LA 40 pneumatic control Fsdjivappopfx Adgsft Bosch E35...DYF welding controller Additional welding systems in various sizes – new and used – can be found in our shop! International shipping rates available upon request!

Kondisi: diremajakan ulang (bekas), Pneumatically operated spot welding machine DALEX Type PMS 10-4 Throat depth: 350 mm with EH cylinder, electrode force 65-390 daN Rated output at 50% duty cycle: 50 kVA Secondary short-circuit current: 34 kA Fedpfx Aohnh Etsdgeft Secondary open-circuit voltage: 2.5-5.0 V with mounted control cabinet according to VDE 0100 Main switch 4-step switch Synchronous welding control 8033 Start via foot pedal Weight: 410 kg

Kondisi: baik (bekas), WMA WMP 08 One-Hand Spot Welder Air-cooled one-hand spot welding system for vehicle construction, tank fabrication, steel cabinet manufacturing, sheet metal processing, and the wire industry. - Effortless welding of all sheet metals - Galvanized sheets can be perfectly welded due to controlled current ramp-up and ramp-down - Air-cooled; equipped for external water cooling - Tools can be easily changed thanks to standardized rotary connections - Single connector each for welding current cable, control cable, and water cooling - Consistently reproducible welding results due to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Comprehensive process monitoring - Simple and user-friendly operation - All set parameters and process values visible at a glance - Welding parameters adjustable only by authorized specialized personnel - Configuration and program management possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 timing settings - 8 programs - Built-in unit - Automatic mains frequency detection 50/60 Hz - Power failure-proof parameter storage - “With/without current” switching at the push of a button Additional configuration parameters (locked for user): - Program selection - Step advance contact - Step advance contact time - Two-hand lock (Check) - Start signal locking - Current flow monitoring - Response threshold - Current flow monitoring - Monitoring time - Current flow monitoring - Power factor adjustment - Delay of 1st half-wave External inputs (24V, DC stabilized and switchable): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (Check)* * These features can be enabled or disabled via configuration parameters. External outputs (24V, DC unregulated ± 20%; + switching, max. 5 W): - Pre-stroke solenoid valve - Welding solenoid valve - Step advance relay - Ready-to-operate relay Manufacturer: WMA Type: WMP 08-01 Rated voltage: 400 V Mains frequency: 50 Hz Rated power (at 50% duty cycle): 22.5 kVA Control cabinet with PLC Logo PDF files available under “Documents” tab. For more new and used items, visit our shop! International shipping costs on request! Fjdpfx Aeq H Aqxsdgsft

Kondisi: sangat baik (bekas), jenis arus masuk: AC (pendingin udara), kedalaman tenggorokan: 750 mm, tegangan masuk: 400 V, berat keseluruhan: 795 kg, Spot welding machine, manufacturer DALEX, type PMS 12-5, version A/EH Rated power at 50% duty cycle: 100 kVA Secondary short-circuit current: 28 kA Secondary open-circuit voltage: 8.33 V Electrode force: 120-720 daN Single-stroke cylinder – Electrode stroke 100 mm Ffjdsqlcp Uepfx Adgot Throat depth: 750 mm with attached switch cabinet according to VDE 0100 – main switch Synchronous welding controller MPS 200 The machine is currently undergoing refurbishment Further pictures to follow

Kondisi: sangat baik (bekas), 3-phase direct current spot welding machine DALEX Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100–600 daN Arm reach: 550 mm Equipped with control cabinet according to VDE 0100 Main switch Synchronous welding controller 8033 Weight: 740 kg Fedpfx Ajhmvawsdgeft

Kondisi: diremajakan ulang (bekas), Water recooler with refrigeration compressor Brand: DALEX (Deltatherm) Type LT 4 Cooling capacity: 4,500 W Compressor power: 0.98 kW Ffodpjq Tudgofx Adgst Pump capacity: 28 l/min Water tank volume: 90 l Dimensions (W/H/D) in mm: 900 x 1005 x 800

Kondisi: sangat baik (bekas), parallel-guided, water-cooled spot welding machine Make: DALEX Model: PL 40 Rated power at 50% duty cycle: 40 kVA Secondary short-circuit current: 21.5 kA Secondary open-circuit voltage: 5.5 V Ffjdpfx Adswd I Ansgjt Single-stroke cylinder - Electrode stroke: 65 mm Electrode force: 65-390 daN Arm reach: 450-750 mm, adjustable Arm spacing: 150 or 310 mm Equipped with attached control cabinet as per VDE 0110 Main switch Synchronous welding controller MPS 1036 Straight tubular arm with 750 mm reach Photos show the loading condition (electrode arms were removed to fit pallet dimensions)

Kondisi: sangat baik (bekas), kedalaman tenggorokan: 415 mm, Water-cooled, pneumatically operated spot welding tongs Make: DALEX Type: A 3139-S2 Rated power at 50% duty cycle: 8 kVA Secondary short-circuit current: 8 kA Secondary open-circuit voltage: 2.9 V Electrode force: 300 daN Equipped with universal suspension and suspension bracket 10 m connection cable Synchronised welding control RS 15 Fedpfx Aetdnqzodgoft 1 pair of electrode arms, 415 mm throat depth – upper arm 245/55-1 K, lower arm V 20//415 S

Kondisi: sangat baik (bekas), Foot-operated, water-cooled rocker arm spot welding machine Make: DALEX Model: SF 16/71 Rated output at 50% duty cycle: 16 kVA Secondary short-circuit current: 17 kA Electrode force: 278 daN Ffjdpfx Adeimd I Aegjt Arm projection: 180-500 mm Arm spacing: 140 or 300 mm Equipped with 8-step switch Asynchronous single-cycle welding control Sample photo Machine is currently being overhauled Weld time: 3-100 cycles

Kondisi: sangat baik (bekas), Spot welding machine with DHZ cylinder Manufacturer: DALEX Model: PMS 12-5 Rated power at 50% duty cycle: 100 kVA Secondary short-circuit current: 46 kA Fsdjwarqnopfx Adgsft Secondary open-circuit voltage: 8.33 V Electrode force: 120-720 daN Weight: 715 kg Complete with separate central control cabinet for connecting up to 5 PMS 12-5 spot welding machines Equipped with PLC, 5 power levels, and 1x MPS 200 synchronous welding controller featuring 8 welding programs

Kondisi: sangat baik (bekas), Welding controller for DALEX spot, projection, and seam welding machines Ffedper Ei Dlofx Adgst Manufacturer: Harms+Wende Model: RATIA 43a Plug-in module for 19" rack enclosure Keypad programming with LCD display 128 programs Operating modes: single spot, series spot, seam welding Dimensions (W/D/H in mm): 450 x 130 x 280 Function-tested – ready for immediate use

Kondisi: sangat baik (bekas), water-cooled, foot-operated rocker arm spot welding machine Manufacturer: DALEX Type: SF 8/71 Rated power at 50% duty cycle: 8 kVA Ffedjp H T Awjpfx Adgot Secondary short-circuit current: 8.8 kA Secondary open-circuit voltage: 2.0 - 3.2 V Electrode force: 52-235 daN Arm spacing: 140 mm Arm reach: 80-300 mm, adjustable with 4-step switch 1-cycle asynchronous welding controller, current time 2-100 periods

Kondisi: sangat baik (bekas), Three-phase DC spot welding machine, Model A/DH Manufacturer: DALEX Type: PMS 14-5 G3 Throat depth: 550 mm Rated power at 50% duty cycle: 150 kVA Secondary short-circuit current: 65 kA Secondary open-circuit voltage: 3.35 - 6.7 V Electrode force: 80-1,200 daN Weight: 1,620 kg Equipped with double-stroke cylinder 4-step switch Main switch Mounted control cabinet according to VDE 0110 Fsdpfov Uwyrsx Adgoft with 100-program welding controller MPS 8043/1

Kondisi: sangat baik (bekas), Pneumatically operated, water-cooled rocker arm spot welding machine Brand: DALEX Model: SL 16/S Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Fedpfev Sql Njx Adgjft Secondary open-circuit voltage: 1.8 - 3.5 V Electrode force: 278 daN Throat depth: 180-500 mm, adjustable Arm spacing: 140 or 300 mm Equipped with 8-step switch for power preselection Standalone control unit 1036

Kondisi: sangat baik (bekas), Control unit for DALEX MF spot and projection welding machine Manufacturer HWH (DALEX) Type HWS 2202 Profil IQ For programming and control 64 programs Constant current control Current ramp-up Ffsdpfx Adjr Hbymjgot Pulse operation LCD display