Beli Mikron Wf 1 bekas (178)

Kondisi: bekas, Tahun pembuatan: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Module – max. 2.5 Module – min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic hobbing machines for worm gears Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. gear diameter without loading magazine approx. 80 mm Max. gear diameter with loading magazine approx. 50 mm Module max. 2 / 2.5 Axial milling length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Cutter diameter 24 – 50/63 mm Max. radial travel of milling slide 0–14/18 mm Max. cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed range, stepless 0.05 – 4.0 mm/rev Radial feed range, stepless 0.2 – 200 mm/min Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic workflow and minimal idle times thanks to freely programmable SIEMENS S5 PLC control for all processing steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, optional shifting, etc., and with part counter, program numbering, and 30-stage numerical fault display. Pneumatic workpiece loading and unloading device aligned parallel to the workpiece axis for shaft-type parts approx. 140 mm long x 8 mm diameter, with pneumatic double gripper for feeding and removing workpieces; blanks are loaded externally in exchange cassettes and inserted into the loading unit. Pgodpfxot Hw D Ro Ab Aeu The double gripper places the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet, clamping them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electronically monitored and controlled. The entire loading device is enclosed in Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration (powered), Machine is set up for hobbing worm shafts/armature shafts used in variable transmission drives for vehicle seats, window winders, etc.

Tahun pembuatan: 1990, Kondisi: bekas, x-travel 450 mm y-travel 400 mm z-travel 400 mm SK40 head Heidenhain 355 control Pgedpjpxrknjfx Ab Aju Coolant system Total power requirement 4 kW Machine weight approx. 2.4 t Space requirement approx. ... m

Kondisi: baik (bekas), Rotary table, indexing rotary table, dividing head, indexing head, NC rotary table, fourth axis, 4th axis, C-axis Pgedpfx Abokvrqfs Asu -Manufacturer: Mikron, NC rotary table type SMP from CNC milling machine Mikron WF 51C/155 -Clamping surface: Ø 630 mm -T-slot width: 14 mm -Motor: Siemens 183V 1.8 kW type HU3078-0AC01 -Encoder: Heidenhain type ROD 250 18000 02S09-04 -Dimensions: 630/630/H495 mm -Weight: 409 kg

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, nomor mesin/kendaraan: 956.71.80.288, jarak pergerakan sumbu X: 300 mm, jarak lintasan sumbu Y: 300 mm, jarak gerak sumbu Z: 300 mm, model controller: HEIDENHAIN TNC 150, Tanpa harga minimum - penjualan dijamin kepada penawar tertinggi! Mesin dilelang akibat penutupan operasi. Penawaran mengikat untuk pengambilan tepat waktu antara 26.01.2026 dan 29.01.2026! DETAIL TEKNIS Perjalanan sumbu X: ca. 300 mm Perjalanan sumbu Y: ca. 300 mm Perjalanan sumbu Z: ca. 300 mm Kepala alat: SK 40 Dimensi meja: 1.000 x 500 mm, dengan 7 alur DETAIL MESIN Kontrol: HEIDENHAIN TNC 150 Pgjdsxqg Itopfx Ab Aou Data Listrik Tegangan operasi: 380 V Frekuensi: 50 Hz Arus nominal: 25 A Koneksi: 10,5 kW Dimensi & Berat Dimensi (P x L x T): 2.500 x 2.400 x 2.200 mm Berat: 2.000 kg PERLENGKAPAN Dokumentasi Collet Kotak blok ukur akhir

Kondisi: bekas, de-hu-001 Psdpjwnhqtofx Ab Aogu

Kondisi: sangat baik (bekas), MIKRON WF 3 DP Universal Milling Machine TECHNICAL DATA Swivel Table Clamping surface: 450 x 800 mm Number of T-slots: 9 T-slot pitch: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8.7 kW Milling Spindle Drive Spindle speeds: 21 steps Speed range: 25 – 2500 rpm Step ratio: 1.258 Spindle motor power: 3.3 / 4.0 kW Tool holder: ISO 40 / M16 Quill travel, vertical: 110 mm Feed Drive Feeds in all 3 axes: Infinitely variable Feed range: 1 – 2000 mm/min Podpfx Aelnfggeb Asgu Rapid traverse in all feed directions: 3000 mm/min Motor torque Longitudinal + cross: 4 Nm Vertical: 8 Nm Travels Longitudinal travel of clamping table (X-axis): Automatic: 400 mm Cross travel of clamping table (Y-axis): Automatic: 400 mm Vertical travel of clamping table (Z-axis): Automatic: 385 mm No guarantee is given for the accuracy, completeness or currency of the information provided.

Kondisi: baik (bekas), Mesin Frais Serbaguna Mikron WF2SA Podpfx Absxlq N De Ajgu Tahun pembuatan sekitar 1990 Heidenhain Aktiv – Indikator digital TNC 114 Feed stepless Lampu mesin Unit pendingin Kaki mesin Perjalanan sumbu: X 420 mm Y 250 mm Z 345 mm Kecepatan putar 50 - 2240 rpm Area penjepitan 635 x 250 mm Feed pada 3 sumbu 0 - 750 mm/menit Feed cepat pada 3 sumbu 1400 mm/menit Holder ISO 40 Spindle vertikal / horizontal dapat diperpanjang Sistem pelumasan sentral Dimensi sekitar 1,2 x 1,2 x 1,6 m Berat sekitar 1200 kg Mesin berada dalam kondisi baik dan sepenuhnya berfungsi. Video pengukuran geometri dapat dikirim atas permintaan. Kaca indikator oli baru dipasang pada sumbu Y. Backlash sumbu X 0,1 mm Backlash sumbu Y 0,15 mm Backlash sumbu Z 0,3 mm Harga neto ex works dari gudang.

Kondisi: baik (bekas), Spesifikasi lengkap dapat dilihat pada foto di iklan. CNC HEIDENHAIN 426. Mesin dalam kondisi mekanis yang sangat baik. Psdpfx Aexl Htfeb Aogu

Kondisi: bekas, CNC tool milling machine MIKRON type WF 40C/3M with CNC path control Heidenhain TNC 310 Machine No. 440911, year of manufacture approx. 1985, overhauled and control conversion in 11/2000 Travels X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse X and Y = 5000 mm/min; Z = 4000 mm/min. Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gearbox steps - Vertical milling head swivels right and left - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours (read off the display) - Control cabinet fixed to the rear of the machine - Coolant system integrated in the machine base - Swivelling control panel Pgedpew A Af Ijfx Ab Asu - Wiring diagram, operating manual for the control available Required space L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg In good condition

Tahun pembuatan: 1987, Kondisi: bekas, nomor mesin/kendaraan: 152.41.74.002, Table clamping surface: 500 x 1000 mm Travel path X: 630 mm Travel path Y: 500 mm Travel path Z: 460 mm Quill stroke (manual): 45 mm Spindle taper: ISA 40 Spindle speeds: 31.5 – 3150 rpm Feed rates, steplessly adjustable: 1 – 3000 mm/min Pgsdpo H I Hdefx Ab Asu Rapid traverse: X/Y 6 m/min, Z 4 m/min Electrical connection: 380 V, 6/8 kW Required space: 1800 x 2120/2600 x 2020 mm Weight: 3100 kg Control: HEIDENHAIN, TNC 155

Tahun pembuatan: 1992, Kondisi: siap digunakan (bekas), X-axis travel: 560mm, Y-axis travel: 500mm, Z-axis travel: 400mm, vertical clamping table dimensions: 300x450mm, number of threaded holes: 2x6, threaded hole spacing: 45mm, thread: M16, angle table clamping surface: 460x800mm, number of T-slots: 7, T-slot spacing: 63mm, T-slot width: 14mm, max. recommended workpiece weight: 350kg. Spindle drive: number of working spindle speeds: 21, speed range (geometrically graduated): 40-4000 rpm, step progression: 1.259, spindle motor power: 3.3 / 4 kW, tool interface: ISO 40 / M16 with draw-in slot, vertical quill stroke: 90mm, infinitely variable feed in all 3 axes: 2–3000mm/min, rapid traverse X and Y axes: 6000mm/min, rapid traverse Z axis: 4000mm/min, feed motor torque (longitudinal and cross): 3.5Nm each, feed motor torque (vertical): 7Nm, control: Heidenhain TNC 407, connected load: 8.7kW, length: 3705mm, width: 2430mm, height: 3100mm, machine weight with vertical milling head and angle table: 2410kg, pallet base weight: 170kg, transport crate weight: 400kg, operating hours: 18,924h. Accessories: 3D probe, 20 tool holders, splash guard cabin, coolant pump, work light, handwheel, machine documentation. An inspection on site is possible. Pgodpjxcxz Nofx Ab Asu

Kondisi: sangat baik (bekas), Tahun pembuatan: 1980, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 400 mm, panjang umpan sumbu Y: 400 mm, panjang umpan sumbu Z: 400 mm, kecepatan spindel (maks.): 2.240 rpm, kecepatan spindel (min.): 30 rpm, tinggi total: 1.750 mm, lebar total: 1.790 mm, panjang total: 1.375 mm, lebar meja: 450 mm, panjang meja: 800 mm, berat keseluruhan: 1.450 kg, Mesin frais terhubung ke jaringan dan dapat dilihat berdasarkan perjanjian. Kondisi sangat baik. Aksesori: 10 pcs dudukan alat SK 40 1 pcs ragum mesin hidrolik dengan kontrol lintasan Heidenhain. Pgodoxbtaqopfx Ab Asu

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Mikron WF 3S with 3-Axis Active Digital Readout Heidenhain TNC 114 and Infinitely Variable Feed Technical Data: Pjdpfew Ni Riex Ab Aogu >> Year of manufacture: approx. 1990 >> Fixed angle table, clamping surface 800 x 450 mm >> Spindle speed: 50 - 2240 rpm >> Infinitely variable feed in 3 axes from 1-750 mm/min >> Rapid traverse in 3 axes: 1400 mm/min >> Travel X/Y/Z: 500/500/380 mm >> Vertical quill – extendable, SK40 taper >> Weight approx. 1600 kg Accessories and Features: >> 3-axis active digital readout Heidenhain TNC 114 >> Central lubrication system >> Operating manual, programming manual, electrical diagrams About the machine: For sale is a used Mikron WF 3S universal milling machine. It is equipped with a Heidenhain positioning control TNC 114, which means it can move a programmed distance in any one axis (X, Y, or Z) and stops once the target is reached. Up to 4 different reference points can be set; dimensions can be entered as absolute values or incremental chain dimensions. The feed is continuously variable from 0-750 mm/min and can be adjusted during machining; rapid traverse is available at the push of a button. Spindle speed is adjustable in steps from 50 rpm to 2240 rpm, but only when the machine is at a standstill. The vertical milling head is fixed with three bolts and can be removed or mounted in just 2 minutes. It is screwed manually with the swing arm (visible on the left of the machine) and can easily be swung to the side. A particular benefit of this machine is the generous travel: Z=380 mm, X=500 mm, and Y=500 mm, which is large relative to the machine size. The machine is also equipped with an electronic protection for the vertical spindle. Mechanically and electrically tested. You are welcome to inspect and test the machine under power at our site.

Kondisi: bekas, TECHNICAL DATA - Table dimensions: 350 x 800 [mm] - T-slots: 7 - Travel, x, y, z: 400, 400, 370 [mm] - Spindle speed: 50 - 2240 [rpm] - Rapid traverse speed with potentiometer: 0 - 630 [mm/min] ACCESSORIES - 3-axis display HEIDENHAIN Pgodpfxjuhbxaj Ab Aou - Splash guard

Kondisi: bekas, Tahun pembuatan: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm Total power requirement 2.6 kW Machine weight approx. 1,500 kg O F F E R We can offer you the following ex-stock, subject to prior sale and errors: MIKRON Universal Tool Milling Machine with Digital Readout Model: WF 2/3 S Year: ca. 1981 21S0401 _____ Working range: Longitudinal travel X-axis 400 mm Cross travel Y-axis 400 mm Vertical travel Z-axis 380 mm Fixed angular table approx. 450 x 800 mm Installation height under spindle approx. 65 – 445 mm Spindle taper SK 40 12 spindle speeds 50 – 2,240 rpm Quill stroke 110 mm Infinitely variable feed XYZ 1 – 630 mm/min Rapid traverse XYZ 1,400 mm/min Spindle drive power 2.6 kW Total drive approx. 5 kW – 380 V – 50 Hz Weight approx. 1,500 kg Equipment / Special features: • HEIDENHAIN 2-axis digital readout for longitudinal and cross travel • Infinitely variable feed on all 3 axes with rapid traverse • Handwheels for all 3 axes for sensitive manual operation • Vertical head (swiveling +/- 90°) with quill and swing-away device for use of the horizontal spindle • Hydraulic tool clamping for horizontal and vertical spindle • Fixed angular table 450 x 800 mm mounted • Integrated coolant system, attached electrical cabinet, central lubrication • Tool cabinet with extensive set of tool holders, horizontal milling device with various horizontal arbors, additional angular milling head, various operating tools • Work lamp, central lubrication, table exchange device This machine is still a “genuine” Mikron milling machine, manufactured in proven Swiss quality. It is ideal for both toolmaking and training purposes. Condition: Very good! Only used in toolmaking. Pgedpfxou U Sabe Ab Aeu Delivery: Ex stock, immediate availability, FCA Metzingen Payment: strictly net – payment due upon receipt of invoice A constant selection of universal and CNC milling machines of all types available from stock – Please ask for alternatives as well!

Kondisi: bekas, Tahun pembuatan: 1986, jam operasional: 66.247 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, Mesin dalam kondisi baik dan masih beroperasi. Tahun pembuatan: 1986 Pergerakan: X 600 / Y/Z 500 Waktu menyala: 66.247 jam Catatan: - Harga TIDAK termasuk aksesori! - Pengambilan oleh pembeli, dari lokasi. - Tanggal pengambilan ditentukan sesuai kesepakatan dengan penjual. - Tanpa garansi - Pembayaran di muka (faktur) atau tunai saat pengambilan Podpfx Abswccfhs Ajgu

Kondisi: siap digunakan (bekas), Control: HEIDENHAIN TNC 150. Pgedpfxegtiaao Ab Asu

Kondisi: baik (bekas), Mikron WF 32 CH Universal Milling Machine Machine equipped with chip and splash guard enclosure Fitted with a Heidenhain TNC355 control unit Technical Specifications Manufacturer: Mikron Model: WF 32 CH Control: Heidenhain TNC355 Travel: X 560 mm, Y 500 mm, Z 400 mm Clamping surface: 530 x 900 mm Pgjdpfxowit Rho Ab Aju Rapid traverse: X, Y 6,000 mm/min, Z 5,000 mm/min Spindle speed: 20 – 6,300 rpm Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg More items – new and used – available in our shop! International shipping costs upon request!

Kondisi: bekas, Tahun pembuatan: 1985, x-axis travel 500 mm y-axis travel 500 mm z-axis travel 350 mm Table surface 800 x 450 mm Spindle taper: ISO 40 Quill stroke mm Feeds - longitudinal and cross mm/min Feeds - vertical mm/min Speed range max. 3150 rpm Supply voltage 380 V / 50 Hz Drive power 4 kW Machine weight approx. 1.7 t Space requirement approx. 2.5 x 2.3 x 2.0 m Control HEIDENHAIN TNC 155, Podpfstv Ia Tox Ab Aegu with electronic handwheel, various tool holders, new bevel gear set,

Kondisi: baik (bekas), Tahun pembuatan: 1990, 1 used universal tool milling machine Manufacturer: Mikron Model: WF 2 SA Year of manufacture: 1990 Equipped with Heidenhain Active Digital Readout TNC 114 Infinitely variable feed Work lamp Coolant system Travel (X / Y / Z): 420 / 250 / 345 mm Spindle speeds: 50 – 2240 rpm Clamping surface: 635 x 250 mm Feed rate in 3 axes: 0 – 750 mm/min Rapid traverse in 3 axes: 1400 mm/min Tool holder: ISO 40 Vertical/horizontal quill extendable Psdpfx Ajrywgzeb Aogu Dimensions (approx.): 1.2 x 1.2 x 1.6 m Weight (approx.): 1200 kg

Kondisi: bekas, Transformer, Trafo, Converter, Three-phase Autotransformer, Three-phase Transformer -Manufacturer: Trasfor, Transformer Trafo 1 PH Snl from CNC milling machine Mikron WF 51C/155 -Type: TNM1m2k5/E -Technical data: see photo nameplate -Dimensions: 180/160/H215 mm Pjdpfokzpmusx Ab Ajgu -Weight: 25.5 kg

Kondisi: siap digunakan (bekas), Speed: 3,150 rpm, Travel X/Y/Z: 710 mm / 500 mm / 500 mm, Number of spindle speeds: 21, Feed rate: 2,000 mm/min, Spindle taper: ISO40 / M16, Distance spindle head to table: 559 mm, Table dimensions X/Y: 500 mm / 1,000 mm, T-slot spacing: 63 mm, Max. workpiece weight: approx. 500 kg. Machine dimensions X/Y/Z: approx. 2,700 mm / 2,300 mm / 2,200 mm, Weight: approx. 3,300 kg, Control: Heidenhain TNC 155. Documentation available. Pedpetuwk Usfx Ab Aogu

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, 1 used universal milling machine Manufacturer: Mikron Model: WF 2/3 DP with Heidenhain Type 135 path control Travel (X/Y/Z): 400 / 410 / 400 mm Table clamping surface: 800 x 450 mm Spindle speed: 30 – 2240 rpm Feed rates: 1 - 750 mm/min Rapid traverse: 2000 mm/min Podpfx Asv N Dzfsb Aogu Tool taper: ISO 40 Machine weight approx.: 1.4 t Space requirements approx.: 2.1 x 1.6 x 2.2 m

Kondisi: bekas, Transformer, Trafo, Converter, Three-phase Autotransformer, Three-phase Transformer -Manufacturer: LAPP, three-phase transformer removed from CNC milling machine Mikron WF 51C/155 -Type: DT -Power: 300 VA Pgjdpfxekzpm Hj Ab Aou -Primary: 3x380 V -Technical data: see nameplate photo -Dimensions: 150/90/H150 mm -Weight: 5.7 kg

Tahun pembuatan: 1988, Kondisi: siap digunakan (bekas), Travel X/Y/Z: 710mm/500mm/460mm, table dimensions X/Y: 1000mm/500mm, max. table load: 500kg, tool holder: SK40, spindle speed: 4000rpm, machine dimensions X/Y/Z: approx. 2000mm/2600mm/2250mm, weight: approx. 3400kg, control: Heidenhain TNC 355, operating hours: approx. 34,000h. Includes coolant system, full work area enclosure, approx. 34 SK40 tool holders, slides and shafts for gear hobbing. Documentation available. On-site inspection possible. Pjdpfjv Sct Sex Ab Aegu