Beli Minarc Tig 180 bekas (17.459)

Kondisi: sangat baik (bekas), en-GB: Type: CS-70/350 CTS Climate Test Chamber, Air-Cooled Test Chamber Volume: 350 litres Internal Dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External Dimensions: Height 1,800 mm, Width 920 mm, Depth 1,665 mm Temperature Operating Range: Temperature Range: -70°C to +180°C Cooling Rate: 3.0 K/min Heating Rate: 5.0 K/min Climatic Operating Range: Temperature Range: +10°C to +90°C Humidity Range: +10% to 98% r.H. Dew Point Range: +5°C to +89.5°C Temperature Deviation: ±0.1 to ±0.3 K (temporal) Humidity Deviation: ±1% to ±2% r.H. (temporal, up to 90% r.H.) Max. ±1% to 3% r.H. (temporal, above 90% r.H.) Electrical Connection: 400V 3/N, 50Hz Connected Load: 7.1 kW Rated Current: 11.5 A Refrigerant: R404A / R23 Weight: 650 kg For your security as a buyer, please note the following information: The following measures are performed on all our offered chambers in advance: Ksdpexn Sb Tofx Adqonc 1. Functional check and replacement of necessary components 2. Recharging with legally compliant refrigerant, if necessary 3. Leak test with certification 4. Upon successful inspection, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in technical data; information provided without liability!) For further questions, please feel free to contact us by phone.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, jam operasional: 75 h, kapasitas angkut: 230 kg, berat kosong: 7.600 kg, tinggi konstruksi: 2.530 mm, jenis bahan bakar: diesel, panjang total: 7.770 mm, jenis penggerak: Diesel, jangkauan lengan: 10.600 mm, lebar konstruksi: 2.300 mm, tinggi kerja: 17.650 mm, Articulating Boom Lift Transmission: Hydrostatic Condition: New machine Technical condition: New Front tyre type: Solid rubber Front tyre size: 18 Front tyre condition: 80 - 100% Rear tyre type: Solid rubber Rear tyre size: 18 Rear tyre condition: 80 - 100% Knedpfxoupauqe Adqsc Description: The 180 ATJ articulating boom lift offers a lifting capacity of 230 kg at a working height of 18.19 m. It meets all requirements for outdoor operations on uneven, sloped, and congested surfaces. Its all-terrain capabilities make it the ideal work partner for jobsites with rough ground. Thanks to the new progressive hydraulic speed control, noise levels and fuel consumption are significantly reduced. Like the other combustion engine-powered work platforms, the 4-wheel drive and 3 steering modes make maneuvering and positioning the machine easy on crowded or constricted construction sites. The design of the control panel provides a clear working environment, ensuring quick operation and immediate productivity. 230 V generator and power outlets in the basket, SMS Safe Man System

Kondisi: bekas, Technical details: Infinitely variable welding current: 320 A Protection class: IP21 Total power requirement: 17 kVA Machine weight approx.: 132 kg Machine dimensions: 1.3 x 0.6 x 0.9 m TIG with 2-stroke; 4-stroke; spot welding and pulse welding Switching between 2-stroke and 4-stroke Ksdsu Nwaxopfx Adqsnc Cooling type: AF New components such as: - 4.0 meter torch package, water-cooled - Ground clamp and ground cable, 4.0 meters - Pressure regulator

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 177 h, Please contact ATS Norway for more information. Please include the reference number when making inquiries: 19184 Specifications: - Hours: 177 - 90 km - 8-wheel drive - Good deck - Automatic cash register - With windshield - Plenty of additional lighting - Radio/CD - Air conditioning - Diesel - Equipped with seatbelt Worl Power Er-180 000L-8 Crane 180 t/m from 2016 Knodpfxjvg At Io Adqsc Build: - St. ttelabs - Extra lightweight - Quick coupler - Rearview camera - Additional winches - Central SM ring Operating hours: 177

Kondisi: bekas, Tahun pembuatan: 2018, 1 piece CNC-controlled drilling, gluing, and dowel insertion machine GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3-phase, 50Hz, complete in standard configuration with: - Support with linear guide comprising: * 1 pc. single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) * 1 pc. blow-out, gluing, and reinforced dowel insertion station for Ø 8 mm dowels, dowel length 30 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, working length 1300 mm, max. traversing speed 78 m/min - Z-axis, position programmable via support table 5-40 mm; with option for NC-controlled Z-axis Ksdpfx Asxnlf Eodqenc - Programmable dowel projection 7-20 mm; with option for NC-controlled Y-axis * Drilling depth 0-35 mm (with drill length 70 mm) automatically set to dowel projection - Closed gluing system: 6 bar glue pressure via glue nozzle, for glues with viscosity 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for flushing glue system; each with 1 stainless steel container for 5 kg glue, and 5 l water - Control lamp for glue level indication in glue container - 1 pc. left side fence, 1 pc. right side fence, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual processing of 1-4 workpieces - 4 pcs. pneumatic tilting vertical clamps 10° for workpiece thickness up to max. 80 mm; workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control system with: * Built-in industrial PC, incl. Beckhoff TWINCAT Soft PLC * Operating temperature 0-50°C * 15" resistive TFT industrial touchscreen display, resolution 1024 x 768 * CPU 2 GHz, 256 MB RAM * 2x network adapters, IDE hard disk, 4x rear USB, 1x front USB * Operating system: WINDOWS 7 - Programming via user-friendly software menu, freely programmable drilling positions by ABSOLUTE, RELATIVE, or GRID coordinates, automatic workpiece mirroring and process optimization, 4 operator fields for different programs, graphical workpiece representation, parametric programming, zero-point shifting, programmable work lists, plain-text error diagnostics OPTIONS: - 1 Electronic glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 4 additional 10° vertical tilting clamps with holder (total 8 clamps) - Surcharge for machine bed length 1800 mm (working length 1800 mm) - Surcharge for: * 1 horizontal drilling unit, 1.5 kW motor, multi-spindle drilling head with 3 individually selectable spindles, 32 mm pitch, X-axis arrangement, tool speed 3000 rpm (standard working length remains unchanged) - Y-axis NC controlled, with ball screw drive and dynamic speed 300 mm/sec; software programmable for dowel projection 7-30 mm and drilling depth 0-42 mm (with drill length 77 mm) for vertical drilling unit (top drilling), Y-axis position 5-42 mm - Surcharge for NC-controlled Y-axis, position 5-62 mm instead of 5-42 mm - Surcharge for: * 1 vertical drilling unit (top drilling), 1.5 kW motor, multi-spindle drilling head with 3 individually selectable spindles, 32 mm pitch, X-axis arrangement, tool speed 3000 rpm; Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm (standard working length remains unchanged) - 1 NC-controlled Z-axis, with K

Tahun pembuatan: 2024, Kondisi: baru, Magnetic separator for chip transport line Kodjcqvhxopfx Adqonc Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Immediately available Location: Ex stock 54634 Bitburg

Kondisi: sangat baik (bekas), Tipe: CS-70/350-5 CTS Lemari Uji Suhu CS-70/350-5 Pendingin Udara Volume ruang uji: 600 liter Pengujian suhu: Rentang suhu: -70°C hingga +180°C Penyimpangan suhu: ±0,1 K / ±0,3 K secara temporal dalam kondisi stabil Kecepatan perubahan suhu rata-rata, tanpa benda uji dan tanpa radiasi panas, Pemanasan: 8 K/menit Kjdpfx Asxn Rwyjdqjnc Pendinginan: 5 K/menit Radiasi panas maksimum 3500 W pada +20°C Pengujian iklim: Rentang iklim / Data teknis Rentang suhu: +10 °C hingga +95 °C Rentang kelembapan: 10% rh hingga 98% rh Rentang titik embun I: +7 °C hingga +94 °C Rentang titik embun II: –10 °C hingga +7 °C Nilai konstan (secara temporal): Konstanta kelembapan I, temporal

Kondisi: bekas, beban: 50 hingga 55% kecepatan tanpa langkah dengan filter air Dimensi (P x L x T): ± 3.000 x 1.400 x 2.100 mm Kodpfx Adsxnxn Tsqsnc Tanpa panel listrik dan pengendali

Kondisi: bekas, Technical details: Stepless welding current: 400 A Protection class: IP21 Total power requirement: 23.2 kVA Machine weight approx.: 128 kg Machine dimensions: 1.3 x 0.5 x 0.9 m - TIG - Manual arc welding and TIG - DC welding current - Cooling type: AF - Control switchable 2-/4-stroke spot welding, stepless The following components have been replaced with NEW ones: Knodpfeu Nwbisx Adqoc - Hose package 4.0 meters - Ground clamp and ground cable 4.0 meters - Pressure regulator

Kondisi: bekas, daya: 245 kW (333,11 hp), jenis bahan bakar: diesel, Tahun pembuatan: 2012, jam operasional: 8.859 h, Berat kosong: 29.700 kg Kjdpfx Aexpqunsdqjnc

Kondisi: baik (bekas), Used flexo plate mounting to proofing machine Product: Bieffebi Type: Mirage 309-180 Cylinder width: 1800 mm Print repeat range: 230–1000 mm Approximate floor area: 2.8 x 1 x 1.5 m Approximate weight: approx. 1500 kg Knodpocx N Dqofx Adqoc Purchase, acquisition, and asset management of industrial equipment and machinery. Wide range of used machinery and industrial equipment.

Kondisi: baru, Tahun pembuatan: 2024, Magnetic separator for chip transport line Pipe magnet with 4 magnetic plates (permanent magnet) Knedpfxecqvhws Adqoc Hinged door for easy removal of metal parts Pipe diameter: 180 mm Location: Ex stock 54634 Bitburg - immediately available -

Tahun pembuatan: 2006, Kondisi: baik (bekas), Kiln Superturbo, Modell Pulsar, 180 m³, intermittierender Typ mit einer Brenntemperatur bis zu 1150°C und einer maximalen Temperatur von 1200°C, ausgestattet mit 24 Hochgeschwindigkeitsbrennern, Knsdpfx Aohgkdqedqec

Kondisi: baik (bekas), Tahun pembuatan: 2004, Böhringer VDF NG 180 - 4, Year of manufacture: 2004, Control: Siemens 840 D, Turning length: 850 mm, Swing diameter over bed: 600 mm, 2 turrets, 12 stations each, Driven tools, Main spindle C-axis 0.001°, Knjdpfxswvhu Ie Adqoc 3-jaw chuck SMW 225, Spindle speed up to 3,000 rpm, Drive power: 53 kW, NC-controlled tailstock, NC-controlled steady rest, Oil mist extraction, Chip conveyor,

Kondisi: bekas, Technical details: Welding current, stepless: 320 / 100 A Protection class: IP21 Total power requirement: 17 kVA Machine weight approx.: 132 kg Machine dimensions: 1.3 x 0.5 x 0.9 m - TIG welding with direct current - TIG welding with pulsed current - Manual arc welding (MMA) Control: Switchable 2/4 stroke, spot welding, stepless adjustment New components include: - Hose package 4.0 meters, water-cooled - Ground clamp and ground cable 4.0 meters Ksdpfx Adsu Nwa Seqjnc - Pressure regulator - TIG welding torch ERGO 301

Kondisi: bekas, jarak tempuh: 87.639 km, daya: 85 kW (115,57 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: otomatis, berat keseluruhan: 2.199 kg, pendaftaran pertama: 07/2022, kelas emisi: Euro 6, warna: abu-abu, suspensi: baja, jumlah tempat duduk: 5, bahan bakar: diesel, Perlengkapan: ABS, filter jelaga, kantung udara, kemudi berkuasa, kendali jelajah, komputer bawaan, kontrol traksi, kunci sentral, pemanas jok, pendingin udara, pintu geser, sensor parkir, sistem immobilizer, sistem navigasi,

Kondisi: baik (bekas), Tahun pembuatan: 2008, diameter rol: 50 mm, lebar rol: 310 mm, lebar konstruksi: 1.290 mm, jenis arus masuk: tiga fasa, Curved roller conveyor KNAPP, powered roller track, 180° curve/ct1018 Manufacturer: KNAPP Rail width: 315 mm / Total width: 385 mm Roller width: 310 mm Inner curve length: 1250 mm Outer curve length: 2300 mm Distance between inner rails: 590 mm Kodpfx Aofxgp Hedqenc Overall diameter: 1290 mm Roller material: steel Roller diameter: 50 mm Ball bearing-mounted steel rollers Powder-coated, perforated steel frame SEW Eurodrive motor Power: 0.25 kW, Speed: 39 m/min Purchase, acquisition, and asset management of industrial systems and machinery. Wide selection of used machinery and industrial equipment.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, masa garansi: 3 bulan, arus pengelasan (min.): 3 A, arus pengelasan (maks.): 300 A, To sell: Fronius TransTig 3000 3-300 AMP 380 Volt Water-cooled 2/4 stroke Pre-gas Post-gas Current rise Current downslope Start current End current Steel and stainless steel weldable Fully overhauled and tested Includes 8-meter PRO18 welding torch, ground cable, gas hose, and 3 months warranty. Visit by appointment only. Test welding is possible. A video of the machine in welding operation can be provided. Kjdpsxmtccofx Adqjnc We also deliver to countries such as Spain, Germany, Austria, Lithuania, Greece, and all other countries inside and outside Europe—shipment on Euro pallets per transport. All our machines have been serviced and are 100% ready for operation, unless otherwise indicated. The pictures above show the actual machine. We can also offer you other machine types, such as: Used, New, Mig, Mag, CO2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode We supply the following brands: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business directly with Cjays Lastechniek and never with third parties.

Kondisi: sangat baik (bekas), Voest DA 180 Voest Alpine DA 180 Conventional Lathe with Digital Display, Year of Manufacture 1981, in Very Good Original Condition The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: VOEST ALPINE Lathe Lead and feed screw lathe, type DA 180/1, year 1981, Swing over bed: 380 mm Swing over cross-slide: 185 mm Turning length: 1,000 mm Center height: 180 mm Bed width: 330 mm Spindle bore: 52 mm Tailstock taper: Morse Taper 4 Coolant system Motor: 380 Volt, 5.5 kW 12 spindle speeds: 44 - 2,000 rpm 66 longitudinal feeds: 0.072 - 4.038 mm/rev 66 cross feeds: 0.036 - 2.019 mm/rev Kedpfx Aexp I D Tsdqonc 66 metric threads: 0.5 - 28 mm 66 inch threads: 1 - 32 TPI 66 module threads: 0.25 - 14 66 DP threads: 2 - 112 3-jaw chuck Weight approx. 1,200 kg Accessories and Equipment: 1 piece Röhm 3-jaw chuck, 200 mm Multifix size B quick change toolpost Digital readout system About the Machine: We offer a Voest Alpine DA 180 conventional lathe with digital readout, year 1981, in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. The Voest runs very quietly even at high speeds. This newer generation of lathes is extremely user-friendly and is capable of producing ground-like finishes. Take the opportunity to inspect the machine under power on site and see its condition for yourself. You will find further drilling machines from well-known manufacturers on our website.

Kondisi: bekas, jarak tempuh: 90.800 km, daya: 85 kW (115,57 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: otomatis, berat keseluruhan: 2.199 kg, pendaftaran pertama: 04/2023, kelas emisi: Euro 6, warna: merah, suspensi: baja, jumlah tempat duduk: 5, bahan bakar: diesel, Perlengkapan: ABS, filter jelaga, kantung udara, kemudi berkuasa, kendali jelajah, komputer bawaan, kontrol traksi, kunci sentral, pemanas jok, pendingin udara, pintu geser, sensor parkir, sistem immobilizer, sistem navigasi,

Kondisi: bekas, jarak tempuh: 86.499 km, daya: 85 kW (115,57 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: otomatis, berat keseluruhan: 2.199 kg, pendaftaran pertama: 11/2022, kelas emisi: Euro 6, warna: perak, suspensi: baja, jumlah tempat duduk: 5, bahan bakar: diesel, Perlengkapan: ABS, filter jelaga, kantung udara, kemudi berkuasa, kendali jelajah, komputer bawaan, kontrol traksi, kunci sentral, pemanas jok, pendingin udara, pintu geser, sensor parkir, sistem navigasi,

Kondisi: bekas, jarak tempuh: 75.400 km, daya: 85 kW (115,57 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: otomatis, berat keseluruhan: 2.199 kg, pendaftaran pertama: 12/2022, warna: perak, suspensi: baja, jumlah tempat duduk: 5, bahan bakar: diesel, Perlengkapan: ABS, filter jelaga, kantung udara, kemudi berkuasa, kendali jelajah, komputer bawaan, kontrol traksi, kunci sentral, pemanas jok, pendingin udara, pintu geser, sensor parkir, sistem immobilizer, sistem navigasi,

Kondisi: bekas, jarak tempuh: 90.500 km, daya: 85 kW (115,57 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: otomatis, berat keseluruhan: 2.199 kg, pendaftaran pertama: 09/2022, kelas emisi: Euro 6, warna: perak, suspensi: baja, jumlah tempat duduk: 5, bahan bakar: diesel, Perlengkapan: ABS, filter jelaga, kantung udara, kemudi berkuasa, kendali jelajah, komputer bawaan, kontrol traksi, kunci sentral, pemanas jok, pendingin udara, pintu geser, sensor parkir, sistem navigasi,

Kondisi: bekas, jarak tempuh: 96.600 km, daya: 85 kW (115,57 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: otomatis, berat keseluruhan: 2.199 kg, pendaftaran pertama: 03/2023, kelas emisi: Euro 6, warna: perak, suspensi: baja, jumlah tempat duduk: 5, bahan bakar: diesel, Perlengkapan: ABS, filter jelaga, kantung udara, kemudi berkuasa, kendali jelajah, komputer bawaan, kontrol traksi, kunci sentral, pemanas jok, pendingin udara, pintu geser, sensor parkir, sistem immobilizer, sistem navigasi,

Kondisi: bekas, jarak tempuh: 103.004 km, daya: 85 kW (115,57 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: otomatis, berat keseluruhan: 2.199 kg, pendaftaran pertama: 10/2022, kelas emisi: Euro 6, warna: abu-abu, suspensi: baja, jumlah tempat duduk: 5, bahan bakar: diesel, Perlengkapan: ABS, filter jelaga, kantung udara, kemudi berkuasa, kendali jelajah, komputer bawaan, kontrol traksi, kunci sentral, pemanas jok, pendingin udara, pintu geser, sensor parkir, sistem navigasi,