Beli Mitra bekas (4.914)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
iklan kecil

11.147 km
Gergaji mitra ganda Emmegi Twin Electra Sun TU 5
EmmegiTwin Electra Sun TU 5
Hubungi
Tahun pembuatan: 1999, Kondisi: bekas, Max. cutting length: 5,000 mm
Max. saw blade diameter: 500 mm
Automatic length positioning and motorized angle adjustment, both inward and outward
Ibjdowb Eq Repfx Adqoc
Travelling roller conveyor
Material support table
Minimum quantity spray device
Weight: 1,800 kg
iklan kecil

10.128 km
Gergaji mitra OMS FC300R dengan ekstraksi
OMSFC 300 R
Hubungi
Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 300 mm, lebar pemotongan (maks.): 145 mm, jenis arus masuk: tiga fasa, kedalaman pemotongan: 90 mm, OMS FC300R Mitre Saw with Dust Extraction
Specification:
• Blade diameter: 300 mm
• Saw motor: 2.5 HP
• Max. cutting dimensions: 90 x 145 mm (height x width)
• Integrated, internal sawdust extraction system
• Blade guards for operator safety
• Adjustable cutting angle: +/- 45 degrees
Iedpfxov Nwrqs Adqobc
• Overall dimensions: 65 x 81 x 145 cm (L x W x H)
Additional information:
• The machine is in very good technical condition and ready for immediate use
• The displayed photos reflect the actual item for sale
• It is possible to power up and test the machine on site
iklan kecil

11.168 km
Gergaji Kotak Mitra Ganda
KALTENBACHSKL 370
Hubungi
Kondisi: bekas, Saw blade diameter: 370 mm
Cutting capacity round: 115 mm
Cutting capacity square: 105 mm
Cutting capacity flat: 70 x 240 mm
Minimum cut-off length: 730 mm
Maximum cut-off length: 4000 mm
Saw blade speeds: 1250 / 2500 rpm
Table swivels: 180°
Stroke: 120 mm
Infinitely variable feed: 0 - 500 mm/min
Coolant system
Cutting area at 45° (square): 95 mm
Cutting area at 45° (flat): 50 x 200 mm
Cutting speed: 1250 / 2500 m/min
Ibodpfx Ajd Il A Ijdqec
Machine weight approx. 1.1 t
Space requirement approx. 5.00 x 1.30 x 2.00 m
Double mitre circular saw for aluminium
consisting of two SKL 370 circular saw machines
mounted on a common travel frame; one machine is moveable.
- Factory no.: 28232 and 28233
- Pneumatic vice
- Spray mist cooling system

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan
Lelang
Lelang telah berakhir

10.309 km
Mesin penggilingan profil + gergaji mitra ganda
ElumatecSBZ 131 + DG 104
Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, jam operasional: 193 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 7.200 mm, jarak lintasan sumbu Y: 480 mm, jarak gerak sumbu Z: 340 mm, lebar pemotongan (maks.): 335 mm, panjang benda kerja (maks.): 6.000 mm, kecepatan spindle milling (maks.): 6.000 rpm, panjang bagian (maks.): 6.000 mm, TECHNICAL SPECIFICATIONS – Profile Milling Machine
Processing length: 7,200 mm
Number of axes: 4
Control system: eluCAM graphical, Windows XP user interface
Work stations: 2 independently operating stations
Revolver tool changer: 8 tools, servo-driven
Tool holder: BT 30
Disc milling cutter diameter: 180 mm
Tool length: 150 mm (from mounting point)
Travel distances
Travel path X-axis: 7,200 mm (without end-face machining), 7,080 mm (with end-face machining)
Travel path Y-axis: 480 mm
Travel path Z-axis: 340 mm
Rapid traverse X-axis: 60 m/min
Rapid traverse Y-/Z-axis: 30 m/min
Positioning accuracy: ±0.1 mm/m
Spindle
Milling spindle speed: 1 to 6,000 rpm
Milling spindle power: 6.0 kW
Supply
Air connection: min. 7 bar
Air consumption: 100 l/min
electrical connection: 400 V, 3~, 50 Hz, 35 A
EQUIPMENT
Two independent workstations with light curtain and camera system
Fixed-angle milling head (not tiltable) for 2 tools, ER20A, up to 18,000 rpm
Tiltable milling head 4 × 90°, ER20, up to 22,000 rpm
Fixed-angle milling head for steel, ER20A, 1,554 rpm
Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts
Ijdpfx Aswprmzodqjbc
Carbide-tipped saw blade Z=100, D=300 mm, cutting width 3.2 mm
Tool holder i=1:3.86 for 18,000 min⁻¹, ER25
Coolant/lubrication unit for steel processing
Disc milling cutter holder BT30, D=16 mm
Disc mill D=92 × 6 mm, Z=14, D=16 mm, carbide teeth
TECHNICAL SPECIFICATIONS – Double Mitre Saw
Max. cutting length: 6,000 mm
Min. cutting length at 90°: 335 mm
Min. cutting length at 45°: 335 mm
Saw blade diameter: 420 mm
Cutting angle (rotation): pneumatically adjustable 90° and 45° inward, intermediate angles and acute 22.5° manually adjustable with digital display
Cutting angle (tilting): pneumatically adjustable 90° and 45° inward
Sawing direction: saw blades move from bottom to top
Control
Control type: E580/1
Length adjustment: automatic with positioning control
Saw blade tilting: pneumatically automatic between 90° and 45°
Positioning accuracy: ±0.1 mm/m
Positioning: pneumatic clamping
Operating system: Windows
Saw unit
Speed: 2,800 rpm
Power per motor: 4,000 W (5.5 HP)
Saw blade cooling: available
Air consumption per cycle without cooling: 40 l
Air consumption per cycle with cooling: 64 l
Supply
Electrical connection: 230/400 V, 3-phase, 50 Hz
Air connection: 7 bar
Dimensions and weight
Length: 7,550 mm
Width: 1,600 mm
Height: 1,450 mm
Weight: 1,750 kg
EQUIPMENT
Automatically closing safety guards
Electronic positioning of heads with +/- 0.1 mm/m accuracy
Digital angle display for manually adjustable special angles
Pneumatically adjustable saw blade rotation and tilt angles
Operation via Windows control system with 8.4" display and handwheel
Saw blade cooling system included
Saw unit with feed from below for optimal cutting force
iklan kecil

12.068 km
Gergaji mitra ganda
RapidDGL 200-E
Hubungi
Tahun pembuatan: 2005, jam operasional: 1.000 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 401, Diese Maschine wurde nur sehr wenig genutzt, da sie lediglich als Ersatzsäge diente. Sie wurde aus der Produktionslinie entfernt, da wir den Platz für ein neues Schirmer Bearbeitungszentrum benötigten. Diese Rapid DGL funktioniert wie neu und ist bei Verkauf sofort versandbereit. Bei Bedarf verfügen wir über das notwendige Equipment, um die Maschine auf einen LKW zu verladen.
Iedpswgygwefx Adqsbc
iklan kecil

10.880 km
Gergaji mitra menaik dengan bilah 600
MecalAS 600 DIGIT
Hubungi
Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, Mono-head Crosscut Saw with Ascending Blade Ø 600 mm
Ibedpev I N Eyofx Adqec
Mono-head crosscut saw with ascending blade Ø 600 mm, designed for precise and versatile cutting operations.
- Worktable rotation: manual, up to ±20°, both right and left.
- Pre-set angles: rapid positioning at 90° and 45°.
- Intermediate angular positioning: manual with pneumatic locking for any cutting angle.
- DIGIT: equipped with digital display for precise adjustment of the cutting angle.
- MQL: minimum quantity lubrication system for efficient tool management.
- Cutting unit rotation: up to ±20°.
Technical Specifications
- Blade diameter: 600 mm
- Blade bore: 50 mm
- Blade rotation speed: 2800 rpm
- Motor power: 4 kW
- Dimensions (W x D x H): from 920/1520 x 1320 x 1525/1800 mm
- Weight: approx. 470 kg
iklan kecil

10.895 km
Gergaji pita semi-otomatis dengan mitra
Bomarindividual 520.360 DGH
Hubungi
Kondisi: baru, The individual 520.360 DGH is a semi-automatic double mitre band saw in a dual-column design. The saw's mitre range extends steplessly from 30° to the left to 30° to the right. The individual 520.360 DGH model is equipped with a fully hydraulic full-stroke vice and a user-friendly control panel with plain text display.
Standard equipment features:
• Double mitre angles: 30° - 45° - 90° - 45° - 30°
• Hydraulic full-stroke vice
• Saw frame mounted on preloaded linear guides
• Infinitely variable band speed adjustment
• Infinitely variable feed rate and cutting pressure adjustment
• Automatic cutting pressure regulation
• Precision carbide saw band guides
• Powerful 3.0 kW drive motor
• Modern control system with plain text display and membrane keyboard
• Freely positionable control panel
• Large-capacity hydraulic unit
Ibedpfodyn H Tox Adqoc
• Machine built to current CE standards and safety regulations
Included:
Minimum quantity lubrication
Digital mitre angle display
Frame height adjustment at control panel
Price on request
iklan kecil

10.128 km
Gergaji mitra OMS FC350R 2,2 kW
OMSFC350R
Hubungi
Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang total: 1.000 mm, tinggi total: 1.600 mm, lebar total: 800 mm, jenis arus masuk: tiga fasa, OMS FC 350 R Crosscut Mitre Saw
Specification:
• Manufacturer: OMS
• Model: FC 350 R
• Blade diameter: 350 mm
Isdov Dgmyjpfx Adqsbc
• Saw motor: 2.2 kW
• Maximum dimensions of workpiece at 90°: 115 x 150 mm (H x W)
• Saw blade safety guards for operator protection
• Extraction port: 60 mm diameter
• Cutting angle adjustment: +/- 45 degrees
• Overall dimensions: 100 x 80 x 160 cm (L x W x H)
Additional information:
• The machine is in very good technical condition and ready for immediate use
• The photos shown reflect the actual item for sale
• Inspection and testing of the machine on-site is possible
• The price listed in the auction does not include VAT or transport costs
iklan kecil

10.897 km
Gergaji mitra otomatis
TrademakMURENA 70-15
Hubungi
Tahun pembuatan: 2022, Kondisi: baru, CROSS-CUT AND END-TRIMMING SAW "MURENA 70-15"
MAIN CHARACTERISTICS:
Maximum cutting width: 700 mm
Maximum cutting height: 150 mm
Ibedpfx Adshpbqmoqjc
Circular blade diameter: 600 mm
Blade bore diameter: 40 mm
Feed speed: 5 – 60 m/min
Positioning accuracy: +/- 1 mm
Motor power: 15 kW (Optional 18.5 kW)
Cutting unit drive: Pneumatic
Extraction port diameter: 120 mm
Extraction capacity: 600 m³/h
Working table height: 850 +/- 20 mm
10.2” touch-screen programmer
Creation of cutting lists via onboard programmer
Remote support via Ethernet or SIM-card
MACHINE EQUIPMENT:
Set of service keys
Machine operation and maintenance manual
CE certification
iklan kecil

10.969 km
Gergaji mitra pengoptimalan tipe dorong
SALVADORSuperPush 250
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Push-feed optimizing crosscut saw with chain loader for complete timber optimization and defect removal.
COST-CUTTING OPTIMIZER
The Superpush 250 represents a true technological evolution over traditional cutting methods, capable of increasing productivity, minimizing labor requirements, and maximizing wood yield.
EXTREMELY ROBUST
Structure entirely made of thick, reinforced, painted steel.
Chain system with motorized raising and lowering.
High-quality 5/8” thick sliding chains.
Pusher carriage size: 300x345x25 mm.
50 mm-wide timing belt with 33 internal steel inserts.
TECHNOLOGICALLY INNOVATIVE
Electronic system comprising a real-time computer linked to a state-of-the-art CNC controller.
Windows-based software environment.
Complete quality management for up to 5 grades.
22” color LED screen.
Remote service via internet + integrated Excel macro.
Iodpfx Ajfhk I Eedqjbc
FAST
Total optic system.
Electronic brushless drive motor.
Intelligent pneumatic clamp.
Adjustable cutting speed.
RELIABLE AND SAFE
Transmission system with hardened and ground linear guides.
"SKF" ball-bearing carriages with double dust protection and automatic lubrication.
Electrical cabinet separated from the machine and self-supporting.
Independent pneumatic controls for adapting to different production types.
Maximum safety rear protection enclosure.
iklan kecil

10.976 km
Gergaji mitra semi-otomatis
CURSALTVM Ø 400 - TVM Ø 500
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, TVM Ø 400 – The Customizable All-Purpose Saw for Your Workshop
The TVM 400 is the essential all-purpose saw featuring a sturdy construction. Designed to efficiently cut small pieces of wood, it swiftly removes knots and irregularities. With the easy addition of accessories such as rollers and stops, the TVM 400 offers maximum versatility and productivity (refer to the ACCESSORIES section for further details).
Main Features:
Efficient and cost-effective: Ideal for small to medium-sized carpentry workshops, delivering excellent value for money.
User-friendly: The machine is designed for operation without highly skilled personnel, saving time and resources.
Reliable: Always ready for use, it supports all operational requirements and minimizes downtime.
Cost optimization: With the TVM 400, you receive a durable machine that requires infrequent maintenance.
Benefits:
Operational safety for the operator thanks to a design that minimizes risks.
Optimized ergonomics to increase productivity during operation.
Wear compensation for materials without frequent need for replacement.
Simplified maintenance to reduce costs and enhance efficiency.
Isdpfx Adov Iqaxsqobc
Prepared for CURSAL accessories to fully adapt to your production needs.
Cost/quality optimization that makes this machine a smart investment.
Applications:
Production of semi-finished wooden furniture.
Manufacturing of windows and doors.
Custom-made productions for various applications.
iklan kecil

10.990 km
Gergaji pita logam/gergaji mitra
KASTOcut GU4
Hubungi
Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4026082, en-GB
Ibedpfx Aev E D N Uodqsc
iklan kecil

10.896 km
Gergaji pita semi-otomatis, mitra R / L
Bomarergonomic 340.278 DGH
Hubungi
Kondisi: baru, Semi-automatic metal band saw with high cutting precision. This machine allows for 90° cuts as well as miter cuts, steplessly adjustable to the left up to 45° and to the right up to 30° (swivel range left 45° and right 60°).
Standard Equipment:
- Large, rotatable support table with zero wear! (The saw band channel swivels with the miter angle)
- Band tension indicator
- Hydraulic control of the cast iron saw arm
- Hydraulic clamping of the workpiece via short-stroke cylinder
- Height limitation of the saw frame via potentiometer from the control panel
- Hydraulic cut pressure regulation (solid material – pipe)
- Saw arm lowering via hydraulic cylinder; continuously adjustable
- Manual lifting of the saw arm after the cut
- Easy manual shifting of the vise left/right
- Electric band tension monitoring with saw band breakage control
- Coolant pump with dual feed to the saw band guides
- Carbide saw band guides and guide rollers
- Bi-metal saw blade M 42
- Chip brush
Technical Data:
● Cutting range:
round flat square
90° 278 340 x 275 275
45° R 260 320 x 255 230
30° R 155 145 x 115 115
45° L 205 145 x 275 180
● Drive power: 1.5 KW//400V//50 Hz
● Band speed: 20-120 m/min stepless
● Saw band dimensions: 3125 x 27 x 0.9 mm
● Minimum remaining piece length: 20 mm
● Smallest diameter: 5 mm
● Material support height: 775 mm
Ibodjd Dpz Sepfx Adqec
● Dimensions: 1700 x 1500 x 2100 mm
● Weight: 410 kg
iklan kecil

11.112 km
Mesin pembuat mitra
V. Grum-SchwensenPuhlmatic RPA 2000
Hubungi
Kondisi: baik (bekas), • Mitre cutting length (mm): 100
Iedpfxjm Sfne Adqobc
• Adhesive medium: hot-melt adhesive
• Automatic assembly: of frame components
iklan kecil

11.133 km
Gergaji pita, mitra, rangka portal
MEBApro260 GP
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Stable gantry frame construction - 2-column linear guide
Saw feed via frequency-controlled spindle drive with automatic cutting pressure regulation
Infinitely variable cutting speed via AC drive
Central, clearly arranged control panel
Height adjustment bar
Pivot axis aligned with saw blade and material support, meaning no change in length measurement
Precise saw band carbide roller guide
Saw band brush
Saw band positioned at a 2° incline
Support elements
Paint finish: silver grey / blue grey (RAL 7001 / RAL 7031)
1 saw band supplied with the machine 4/6 TPI
Operating manual and spare parts list on CD-ROM
Additional standard equipment:
Digital mitre display 90°–30°
Ibodpfx Adebi S E Reqoc
Mitre bearing above the working area, ensuring all components remain free from contamination by chips
Integrated closed roller track 2000 mm
Quick material clamping. For any angle of the saw frame, the material is clamped parallel at 90°
Chip drawer
Minimal quantity lubrication, environmentally friendly and clean
Design:
Semi-automatic
Mitre cutting capacity:
90°: Ø 260 mm, square 300x260 mm
45° right: Ø 240 mm, square 220x260 mm
30° right: Ø 140 mm, square 140x200 mm
Motor: [kW] 1.5
Saw band: [mm] 3350x27x0.9
Saw band speed: 15–150 m/min
Working height: [mm] 750
iklan kecil

10.969 km
Gergaji mitra pengoptimalan tipe dorong
SALVADORSuperPush 200
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Push-feed optimizing saw for complete timber optimization and defect elimination.
COST-CUTTING OPTIMIZER
The Superpush 200 is the direct technological evolution of traditional cutting methods, capable of increasing productivity, minimizing labor requirements, and maximizing timber yield.
EXTREMELY ROBUST
Heavy-duty, fully painted steel and reinforced frame.
Special 30-degree inclined table to facilitate loading and maintain precise alignment of the workpiece during processing.
Push carriage support: 300x345x25 mm.
50 mm wide toothed belt with 33 internal steel inserts.
Branding table and horizontal, continuous outfeed table, 300 mm wide.
TECHNOLOGICALLY INNOVATIVE
Electronic system consisting of a real-time connected PC and a state-of-the-art CNC controller.
Windows-based software.
Fully manages up to 5 grades of quality.
22” LED full-color display.
Remote service via Internet. + Excel Macro included.
Ibedpfx Adsfg U H Nsqoc
HIGH SPEED
Total optic system.
Brushless electronic feed motor.
Intelligent clamp.
Adjustable cutting speed.
RELIABLE AND SAFE
Transmission system runs on hardened and ground guideways.
SKF ball-bearing carriages with dual dust protection and automatic lubrication.
Self-supporting electrical cabinet, separated from the main machine.
Independent pneumatic adjustments for various production requirements.
Maximum-safety protective rear enclosure.
iklan kecil

10.976 km
Gergaji mitra khusus
CURSALTRV 1200L Ø550 - TRV 1600L Ø700
Hubungi
Kondisi: baru, Tahun pembuatan: 2024, Maximize profits with TRV 1200L and TRV 1600L: From sawmill to firewood
TRV 1200L Ø550: Efficiency and Speed for Continuous Cutting
Optimize your waste management and turn production leftovers into immediate economic value!
The TRV 1200L Ø550, with its advanced design, is the ideal solution for sawmills handling large volumes of multilayered offcuts and flitch slabs. The result? A continuous and automated disposal process that converts waste into high-quality firewood.
Key Features:
Simplified Handling: Discharge scraps and waste indiscriminately onto the wear-resistant conveyor/roller table (VV).
Intelligent Clamping System: Innovative technology allows processing of overlapping pieces with varying shapes and thicknesses.
Enhanced Precision: PLC-automated cutting system with time-controlled longitudinal measurement of cut pieces.
Independent Sections: Equipped with 5 sections, each with its own pneumatic cylinder and shock absorbers for maximum stability.
Increased Safety:
Advanced Protection System: Access door to moving parts equipped with a safety interlock switch.
Ibodpfsv Ip T Rjx Adqec
Sealed, non-duplicable safety key for exclusive access.
Protective channel with sealed key and reinforced blade guard for maximum operator safety.
Rapid Saw Blade Drive Stop (
iklan kecil

10.896 km
Gergaji pita manual dengan mitra R / L.
Bomarergonomic 340.278 DG
Hubungi
Kondisi: baru, Manually operated metal bandsaw with high cutting accuracy. This machine allows for 90° cuts as well as continuously adjustable miter cuts—up to 45° to the left and up to 30° to the right (swivel range: 45° left, 60° right).
Standard equipment:
- Large swiveling support table with zero wear! (The saw blade channel rotates with the miter)
- Band tension indicator
- Hydraulic control of the cast iron saw arm
- Hydraulic clamping of the workpiece via short-stroke cylinder
- Height limitation of the saw frame via potentiometer from the control panel
- Hydraulic cutting pressure control (solid material – tube)
- Arm descent via hydraulic cylinder; infinitely adjustable
- Manual raising of saw arm after cut
- Smooth, manual movement of the vice left/right
- Electric band tension monitoring with saw blade break control
- Coolant pump with dual supply to the saw blade guides
- Carbide saw blade guides and guide rollers
- Bi-metal saw blade M 42
- Chip brush
Technical data
● Cutting range:
Ibjdpjd Dpz Asfx Adqsc
round flat square
90°: round 278 mm / flat 340 x 275 mm / square 275 mm
45° R: round 260 mm / flat 320 x 255 mm / square 230 mm
30° R: round 155 mm / flat 145 x 115 mm / square 115 mm
45° L: round 205 mm / flat 275 x 180 mm / square 180 mm
● Drive power: 1.5 kW // 400V // 50 Hz
● Band speed: 20–120 m/min, stepless
● Saw blade dimensions: 3125 x 27 x 0.9 mm
● Minimum residual piece: 20 mm
● Smallest diameter: 5 mm
● Material support height: 775 mm
● Dimensions (L x W x H): 1700 x 1500 x 2100 mm
● Weight: 410 kg
Price on request
iklan kecil

11.112 km
Mesin pembuat mitra
Grum-SchwensenHF 120
Hubungi
Kondisi: baik (bekas), • High frequency
Iodpfx Adom Sfqoqjbc
• Mitre cut length (mm): 100
• Adhesive medium: white glue
• Gluing of frame parts
iklan kecil

11.133 km
Gergaji pita, mitra ganda, semi-otomatis
MEBAbase24DG-HS
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, MEBAbase: The Must-Have for Makers.
The starter saws in the MEBAbase series are suitable for a wide range of applications and are reliable all-rounders. Whether for your hobby in the garage, for craftsmen, or for metalworkers – there is something for everyone.
The portfolio ranges from small manual mitre saws to straight-cut automatics, making them the cornerstone of your workshop.
The universally applicable mitre band saw MEBAbase 24 DG offers advanced ergonomics and outstanding value for money.
Simple, central operation.
Technical Data
Cutting Capacity
90° - 240 - 310x240
45°L - 200 - 200x200
45°R - 200 - 200x200
30°R - 140 - 200x140
Remnant Length 60mm
Cutting Speed 35 and 75m/min, pole switchable
Drive – Saw Band 1.10/1.8kW; 3 x 400V, 50Hz
Saw Frame Feed Infinitely adjustable up to 200mm/min, hydraulically adjustable
Saw Band Tension Mechanical
Saw Band Dimensions 2910 x 27 x 0.9mm
Working Height 900mm (without mounting elements)
Weight 470kg
Dimensions 800 x 1750 x 1500mm
Standard Features of the MEBAbase 24 DG
- MEBA Mitre System: Large, swiveling table prevents cutting into the material support surface – minimizing wear costs! Material is always clamped squarely against the saw band.
- Manual mitre adjustment from 90° to 30°, stepless, using a scale with 1.0° accuracy
- The pivot point for mitring is the intersection of the saw band and the material support, which means there is no change in length when changing angles
- End stops at 30° – 45° – 90° – 45°
- Hydraulic quick-clamping for material. At any saw frame angle, the material is clamped parallel at 90°
- Central machine control
- Adjustable cutting pressure by the dead weight of the heavy, torsion-resistant saw frame, with fine regulation according to material cross-section using a hydraulic damping cylinder and balancing spring
- Saw band drive with automatic shut-off
- Infinitely adjustable vise jaws
Ibsdsnfvl Sjpfx Adqoc
- Movable band guide arm, adjustable to material width
- Saw band deflection wheels with carbide guides
- Practical chip collection tray with drip strainer
- Integrated chip removal brush
- Mechanical saw band tensioning
- Operating manual and spare parts list (digital)
- 1 MEBA bimetal saw band 4/6 TPI installed on the machine
- Complete coolant system, painted in anthracite (RAL 7016)
Technical modifications reserved. Exact delivery times will be communicated with your order confirmation.
iklan kecil

11.133 km
Gergaji pita, mitra ganda semi-otomatis
MEBAswing320 DG
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Fast mitre adjustment from 30° to 135° steplessly.
Digital mitre display with 0.1° accuracy.
Patented mitre system (ERP No. 0491120).
Automatic positioning of vices; the workpiece is always clamped exactly at a right angle and close to the saw blade.
The mitre pivot point is at the intersection of the saw blade and material support, preventing any change in length measurement.
Quick-action material clamping. The material is clamped parallel at 90° in any saw frame position.
MEBA – High-performance package version “HSS”.
Hydraulic lifting (H) and lowering (S) of the saw frame.
Hydraulic clamping (S) of the workpiece.
Stepless hydraulic cutting pressure and feed rate control.
Lowering speed indicated via scale.
Cutting pressure indicated via manometer.
Rapid descent of the saw frame to material edge via push button.
Complete coolant system with electric submersible pump.
Machine base with chip collection tray.
Frequency-controlled AC drive: 15-150 m/min, 3 kW
Saw blade drive with automatic end stop.
Saw blade tension by torque wrench.
Precision carbide saw blade roller guides, saw blade cleaning brush.
Paint finish: silver grey / blue grey (RAL 7001 / RAL 7031)
1 saw blade mounted on the machine, 4/6 TPI.
Operating manual and spare parts list on CD-ROM.
Version:
Semi-automatic
Mitre Capacity:
Iodpebrq Txsfx Adqsbc
90°: Ø 325 mm, square 500x300 mm
45° right: Ø 360 mm, square 300x300 mm
30° right: Ø 200 mm, square 200x200 mm
45° left: Ø 300 mm, square 300x300 mm
Motor: [kW] 3
Saw blade: [mm] 4200x34x1.1
Saw blade speed: 15–150 m/min
Working height: [mm] 750
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

iklan kecil

11.133 km
Gergaji pita, mitra ganda semi-otomatis
MEBAeco335 DG
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Centralized machine operation
Movable band guide arm, adjustable to material width
Ibedpfx Adjbi S H Ioqoc
Precise carbide-tipped band saw blade roller guides
Swarf cleaning brush synchronized with blade movement
Manual blade tensioning via torque wrench
Operating manual and spare parts list on CD-ROM
Coolant device combinable with MEBAeco micro-sprayer
Paint finish: silver grey / blue grey (RAL 7001 / RAL 7031)
MEBA – High-Performance Package
Saw feed via frequency-controlled ball screw drive
with automatic cutting pressure and feed monitoring, as well as rapid lowering of the saw frame
Frequency-controlled AC drive, 15-150 m/min
Hydraulic full-stroke material clamping
Additional standard features for MEBA 335 DG:
Digital mitre display to 0.1°
Mitre range: 30° - 135°
Patented mitre system (ERP no. 0491120)
Automatic positioning of clamping jaws; material is always clamped square to, and close to, the saw blade
Design:
Semi-automatic
Mitre cutting capacity:
45° left: Ø 305mm, square 305x335mm
90°: Ø 335mm, square 500x335mm
45° right: Ø 330mm, square 320x335mm
30° right: Ø 180mm, square 170x335mm
Motor: [kW] 3
Saw blade: [mm] 4400x34x1.1
Blade speed: 15-150 m/min
Working height: [mm] 750
iklan kecil

11.133 km
Gergaji pita, mitra ganda semi-otomatis
MEBAswing405 DG
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Fast mitre angle adjustment from 30° to 135°, infinitely variable.
Digital mitre angle display with 0.1° precision.
Patented mitre system (ERP No. 0491120).
Automatic movement of clamping jaws; the material is always clamped at a right angle, close to the saw blade.
The mitre pivot point is at the intersection of the saw blade and the material support, resulting in no change in length dimension.
Quick-release material clamping. For every frame angle, the material is clamped parallel at 90°.
MEBA – High-performance package, “HSS” version:
Hydraulic lifting and lowering of the sawing frame
Hydraulic clamping of the workpiece
Infinitely variable hydraulic cutting pressure and feed rate regulation
Display of lowering speed via scale.
Display of cutting pressure via manometer.
Rapid lowering of the saw frame to the material edge via push button.
Complete coolant system with electric immersion pump
Machine base with chip collection tray
Frequency-controlled AC drive, 15–150 m/min, 3 kW
Saw blade drive with automatic end stop
Iedpfx Asbrq Sbsdqobc
Saw blade tensioning via torque wrench
Precision saw blade carbide roller guides, saw blade brush
Paintwork: silver grey / blue grey (RAL 7001 / RAL 7031)
1 saw blade on machine 4/6 TPI
Operating manual and spare parts list on CD-ROM
Additional standard equipment for MEBA 405 DG:
--ᐳ Free-standing control console
Version:
Semi-automatic
Mitre capacity:
90° round Ø 410 mm, square 620 x 410 mm
45° right round Ø 360 mm, square 420 x 360 mm
30° right round Ø 300 mm, square 300 x 300 mm
45° left round Ø 300 mm, square 300 x 300 mm
Motor: [kW] 3
Saw blade: [mm] 5000 x 34 x 1.1
Saw blade speed: 15–150 m/min
Working height: [mm] 750
iklan kecil

11.133 km
Gergaji pita, mitra ganda semi-otomatis
MEBAsteel1100 DG
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Standard equipment:
MEBA - High-Performance Package
Saw feed via servo-controlled ball screw drive with automatic cutting pressure and feed regulation. Rapid descent of the clamping jaw.
NC mitre adjustment 30°-150° (+/- 60°)
Hydraulic full-stroke material clamping
Robust, vibration-damping saw frame guidance via proven 2-column guide system
Powerful AC saw band drive with high efficiency and low energy consumption
Saw band inclined at 3° relative to the material support surface.
Ibodpfxjbnkk Se Adqsc
Material height detection
Automatic switch from rapid traverse to working feed
Saw band drive with end-of-stroke shut-off
Automatic adjustment of band guide arm to material width
Precise carbide roller guide for the saw band
Saw band tension hydraulically adjustable with settable tracking and pressure relief when idle
Automatic chip removal brush
Standard with MEBA micro-dosing system (no flood cooling)
Minimum speed and saw band breakage monitoring
Electronic PLC control
Material clamping always at the shortest distance to the saw band
Free-standing operator panel
Saw band inclined at 7° to the material support surface
Paint finish: silver grey / blue grey (RAL 7001 / RAL 7031)
Operating manual and spare parts list on CD-ROM
Version
Semi-Automatic
Cutting range
90°: Ø 510mm; square 1100x500mm
30° left, Ø 450mm, square 450x500mm
45° left, Ø 510mm, square 700x500mm
30° right, Ø 450mm, square 450x500mm
45° right, Ø 510mm, square 700x500mm
Motor: [kW] 9.0
Saw band: [mm] 9300x54x1.6
Saw band speed: 15-150 m/min
Working height: [mm] 630
iklan kecil

11.133 km
Gergaji pita, mitra, manual
MEBAbase17G
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, MEBAbase: The Must-Have for Makers.
The starter saws of the MEBAbase series are suitable for a wide range of applications and are reliable all-rounders. Whether for your hobby in the garage, for craftsmen or metalworkers – there is something for everyone.
The portfolio extends from small manual mitre saws to straight-cut automatic machines, making them the foundation for your workshop.
Iedpfx Adjdb Rwasqjbc
The universally applicable mitre band saw MEBAbase 17G is ergonomically optimized and offers excellent value for money.
Simple central operation.
Technical Data
Cutting Capacity
90° – 175 – 200x75 or 190x135mm
45° – 110 – 150x110mm
30° – 75 – 100x70mm
Cutting speed
35 – 80m/min
Drive – Saw band
2kW; 230V, 50Hz
Saw blade tension
Electronically monitored
Saw blade dimension
2140 x 20 x 0.9mm
Weight
143 KG
Dimensions
1080 x 800 x 1750mm
Standard Equipment of the MEBAbase 17 G
- Fast mitre adjustment from 90° to 45°, steplessly according to scale with 0.5° accuracy
- Mitre rotation point is the intersection between the saw blade and the workpiece stop, so there is no change in length measurement when the angle is adjusted
- Powerful 2000 W motor
- Manual quick-release vice
- Complete coolant system
- Saw blade tension is electronically monitored
- 1 saw blade fitted (6/10 TPI)
- Saw blade drive with automatic shut-off
- Operating manual and spare parts list (digital)
- Anthracite paint finish (RAL 7016)
Technical modifications reserved.
The machine consists of two parts and must be assembled according to the assembly instructions.
Exact delivery times will be specified in the order confirmation.
Kami memudahkan pencarian untuk Anda: "mitra"
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.
Bekas Mitra (4.914)
Sekarang telusuri seluruh Machineseeker dengan lebih dari 200.000 mesin bekas.Jelajahi nama mesin paling populer:

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan