Beli Mk5 bekas (218)

Kondisi: bekas, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Space requirement approx. 3.6/3.5 m As a world leader in the field of Kellenberger overhauling/retrofit, we are not only able to deliver machines in new-machine quality and with warranty, but can also provide service for your machines: Kellenberger Kel-Varia series with Kelco 90 control. Mechanical overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New user-friendly enclosure - New paintwork Electrical overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control with BEMA round grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales on x and z axes - New absolute rotary encoder (for B axis) Standard equipment: - Tailstock with Morse taper MK5, optionally with MK5/short taper adapter - Steady rest with MK4 taper, optionally with fine adjustment - Grinding spindle stock T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding device belt-driven via grinding spindle motor - Grinding spindle motor 4.4 kW - High-resolution B axis - Marposs measuring system for grinding wheel measurement - Longitudinal positioning Marposs - GAP control (sensor on grinding spindle stock) ELASO integrated into control interface - Semi-automatic balancing from ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at extra charge: - HF internal grinding spindle - High-precision, highly tilt-resistant workpiece spindle stock - Measurement control - Extraction system - Paper band filter Control: Grinding basic cycles: - Zero the workpiece with Z-position (longitudinal positioning) - Grinding wheel measurement with BEMAT - Approach sensor GAP - Measuring dressing diamonds - Corrections - External and internal cylindrical grinding (plunge and traverse grinding) - External and internal taper grinding (swivelling the B-axis, dressing with straight wheel) - External and internal radius grinding (radius dressed onto the wheel) Optional grinding cycles: - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000 Ncedeuwv H Tepfx An Usu

Kondisi: bekas, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: ±180° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivel range: ±10° Table longitudinal travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (supported): 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Refurbished as per Kellenberger guidelines, including new, modern, and future-proof control system. Photo shows already delivered machine with 1000 mm centre distance. - Operation via touch panel is extremely user-friendly. - The symbols on the control panel are practically identical to those of the original controller, so no retraining is required. - Diagnostic function showing PLC messages and digital I/Os. - Dressing function can be expanded or modified as per customer requirements. - Workpiece spindle orientated stop available on request. - New max. infeed amount 40 mm, can be further increased on request. - 2-axis digital readout. x-axis resolution 0.5 µm. Nsdpjuxft Ejfx An Uecu Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) - New, stable internal grinding attachment, diameter 80 mm or 100 mm - Increasing centre height to max. 225 mm - Variable speed control for grinding spindle Included: - Operator tools - Drawbar for chuck Further accessories on request. The machine features an electronically controlled infeed system on the x-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup for individual parts. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control Please note: This machine tool does not currently comply with the essential safety and protection requirements as specified in BetrSichV 2015. An increase in the required minimum safety objective must be determined via a risk assessment in accordance with BetrSichV.

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±8° Longitudinal movement of table: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Workpiece weight, max. — between centres: 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Required space approx.: 4.2 x 2.0 m Photo: Machine of identical construction shown with centre height 225 mm Version R: Machine equipped with central lubrication and roller guide in the flat way of the X-axis, as well as air lift-off in the grinding headstock. - Digital display on 2 axes. X-axis resolution 0.5 μm Options: - Rotary encoder with digital display on workpiece headstock Njdjd Ih D Hspfx An Uecu - Rotary encoder with digital display on grinding headstock (height adjustment using spindle not possible) - New stable internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories on request. The machine tool does not currently comply with the basic safety and protection requirements as outlined in the BetrSichV 2015. An assessment of the required minimum protection level must be determined by means of a risk assessment in accordance with BetrSichV.

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1000 mm Center height 175 mm Space requirements approx. 3.6/3.5 m As a world-leading company in the field of Kellenberger – Overhaul / Retrofit, we are not only able to deliver the machines in as-new condition with warranty, but can also offer you service for your machines: Kellenberger Kel-Varia series with Kelco 90 control. Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New user-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Standard equipment: - WSS with MK5 taper, optionally with MK5/short taper adapter - RST with MK4 taper, optionally with fine adjustment - Grinding spindle head T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment belt-driven via grinding spindle motor - Grinding spindle motor 4.4 kW - B-axis high resolution - Marposs measuring system for grinding wheel measurement - Longitudinal positioning Marposs - GAP Control (sensor on the grinding spindle head) ELASO integrated into the control interface - Semi-automatic balancing by ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at extra charge: - HF internal grinding spindle - Ultra-precise, high-stiffness workpiece spindle head - Measuring control - Extraction unit - Paper band filter Control: Basic grinding cycles: - Zeroing workpiece with Z-Pos (longitudinal positioning) - Grinding wheel measurement with BEMAT - Approach sensor GAP - Diamond dresser measurement - Corrections - External and internal cylindrical grinding (plunge and traverse grinding) - External and internal taper grinding (B-axis swivel, dressing with straight wheel) - External and internal radius grinding (radius dressed onto wheel) Optional grinding cycles: Ncsdjuwv H Hspfx An Uou - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Kondisi: bekas, EN: Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivels: 360° Grinding headstock swivels: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed: 0–40 mm / Ø Continuous feed: 0–40 mm / Ø Table swivelling range: ±6.5° Table longitudinal travel: 1530 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Workpiece max. weight (unsupported): 130 kg incl. clamping Maximum transverse movement: 270 mm Internal spindle mounting: 80 mm Tailstock quill taper: MK3 Quill travel: 30 mm Total power requirement: 6.5 kW Machine weight: approx. 3.05 t Space requirement: approx. 4 x 2 m Overhauled according to Kellenberger guidelines Including new, state-of-the-art and future-proof CNC control. Photo shows a machine already delivered with special options. - Operation via touchscreen panel is extremely user-friendly. - The icons on the control panel are practically identical to the original control, so no re-training is necessary. - Diagnostic function with display of PLC messages and digital I/O - Infeed dressing function can be extended or modified as per customer requirements. - Optional indexed spindle stop for the workpiece spindle available. - New maximum infeed travel: 40 mm (can be further increased on request). - Digital readout in 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital readout on the workpiece headstock - Rotary encoder with digital readout on the grinding headstock (height adjustment not possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm - Increase centre height to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Further accessories on request. Machine is equipped with an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic table longitudinal feed and rapid traverse. Highly versatile for external and internal cylindrical grinding, or for external, face and internal grinding of single parts in a single clamping. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation Ncsdpfx Aneuxftrs Usu - In-process measuring control Please note: At present, the machine does not comply with the essential safety and protection requirements as required under BetrSichV 2015 (German Ordinance on Industrial Safety and Health). An increase of the minimum required safety target must be determined through a risk assessment in accordance with BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 450 mm Grinding length: 1,500 mm Centre height: 225 mm Control system: FAGOR EQUIPMENT -T1 500 mm grinding wheel diameter -T2 400 mm grinding wheel diameter -T6 internal grinding attachment -T7 internal grinding attachment -Spindle motor, water-cooled, 9.8 kW -Marposs tool measurement system -Active longitudinal positioning -Kel-Set -GAP monitoring on T1 and T2 by ELASO, contactless integration into the control interface -GAP monitoring on T3/T4 via fluid sensor -Semi-automatic balancing by ELASO, integrated into the control interface for T1/T2 -Tailstock: hydraulic, with fine adjustment +/- 150 µm -Dressing device on subtable, workpiece spindle side -Dressing device on subtable, tailstock side -Dressing device on table top -New service- and operator-friendly enclosure SPECIAL FEATURES: Workpiece spindle head with direct drive *strongly recommended for non-cylindrical grinding *Max. workpiece weight (overhung): 75 kg *Max. workpiece weight (between centers): 150 kg *water-cooled *MK5 combined with short taper mounting acc. to DIN 55026 *Oriented spindle stop *Fixed base B axis with direct drive, centre height 225 mm *Extremely torsion-resistant *High positioning accuracy *Resolution: ° *Water-cooled MECHANICAL REFURBISHMENT: -Complete machine overhauled according to Kellenberger measurement protocol -New paintwork Hydraulic unit new: -Improved temperature control (oil cooler) -Energy saving: only one pump, also not in continuous operation! -Pressure monitoring Nedjuxfu Nspfx An Uocu -Monitoring of water content in the hydrostatic oil (early detection of bellows damage) Hydrostatic screw drive in X-axis -Wear-free, as there is no contact in operation -No loss of accuracy, even in long-term operation at full load at maximum speed -Friction-free at low speeds -No reversal jump in frictional force when changing direction -Transmits the smallest rotational movements -No stick-slip effect even at low speeds -No fluctuations in frictional torque due to ball circulation -Higher axial rigidity compared to ball screw drives -Significantly better damping, resulting in improved workpiece surface finish and tool service life -No vibrations due to ball circulation -Suitable for high speeds and accelerations -Cost-effective alternative to linear motors with higher accuracy and significantly lower heat generation -Significantly lower power loss, preventing issues with chips on permanent magnets -Much lower cooling requirements than linear motors ELECTRICAL REFURBISHMENT: -New, modern CNC CYLINDRICAL GRINDER control system with BEMA cylindrical grinding user interface -Newly built electrical cabinet -New drive technology -Replacement of all electrical wiring Pressure switches, etc. -New absolute optical scales on X and Z axes -New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a base license and various options, which are available depending on the machine’s configuration. Software base: - External and internal oscillating grinding - External and internal plunge grinding - External and internal face oscillating grinding - External and internal face plunge grinding - External and internal taper oscillating grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillating grinding - Workpiece...

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel range: 360° Grinding headstock swivel range: 180 +/- ° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivel range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. fixture Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m As a global leader in Kellenberger overhauls/retrofit, we are not only able to deliver machines in like-new condition with warranty, but can also offer service for your recently delivered machines with additional options such as: - Splash guard doors - X-axis enclosure - Grinding headstock swivel angle indicator Available at extra cost. Geometrically overhauled and newly painted with original electrics. The machine features central lubrication and roller guideways on the X-axis flat slide as well as standard air lift on the grinding headstock. - Digital readout on 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital readout on the workpiece headstock - Rotary encoder with digital readout on the grinding headstock (height adjustment with spindle not possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm with height adjustment - Centre height increase up to max. 225 mm Nsdpfxsuxftxs An Uocu - Variable speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Further accessories available on request. At present, the machine tool does not meet the basic health and safety requirements as stated in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine the required minimum safety objectives.

Kondisi: bekas, Grinding diameter: 350, 450 mm Grinding length: 600 mm Centre height: 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding spindle head swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed (per stroke): 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±10° Table longitudinal movement: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – flying: 130 kg incl. clamping Internal spindle mount: 70 mm Total connected load: 6.5 kW Machine weight approx.: 2.2 t Floor space required approx.: 3.1 x 2.0 m As a world leader in Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new condition with warranty, but can also provide service for your machines, fully overhauled to metric standards and newly painted. Photo shows a previously delivered machine, possibly with different options. The machine is equipped as standard with central lubrication and roller guideways in the X-axis flat bed, as well as air lift-off in the grinding spindle stock. BEMA standard features include: - 2-axis digital readout. X-axis resolution: 0.5 μm - Grinding spindle speed display Ncjdpfx Aed Ih D Een Usu - Stepless speed control for the grinding spindle, 70–100% - Stepless speed control for the internal grinding spindle, 70–100% - Workpiece spindle drive by three-phase motor, continuously variable via frequency converter Optional features (at extra cost): - Encoder with digital display in the workpiece headstock - Encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - Sine bar - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height up to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Of course, our fully overhauled machines come with a 12-month warranty (valid only for neighboring countries). Further accessories available on request. At present, this machine tool does not comply with the fundamental safety and protection requirements as specified in BetrSichV 2015. The necessary minimum safety level must be determined by a risk assessment pursuant to BetrSichV.

Kondisi: bekas, en-001 Ncedsd Ih Egepfx An Usu

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (overhung): 130 including clamping unit kg Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space required approx.: 4.2 x 2.0 m Immediately available, naturally with a 12-month warranty! Geometrically overhauled and repainted with new electrics. In KELLENBERGER quality!!! Ncodpfxjv I Eq Se An Uju - Digital display on 2 axes. Resolution on the X-axis: 0.5µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Additional accessories available on request The machine tool does not currently meet the basic safety and protection requirements as specified in BetrSichV 2015. An increase to the required minimum safety objective must be determined via a risk assessment according to BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Space requirement approx. 3.6/3.5 m Photos show an identical machine with 225 mm centre height Base Model: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - B-axis infinitely variable, high resolution - Marposs measurement system for tool setting - Active longitudinal positioning - GAP control at T1 and T2 from ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt-driven Options at Additional Cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (lead time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic leadscrew in X - New hydrostatic system with only one pump and accumulator for better energy efficiency - Monitoring of water content in the hydrostatic system - Extraction unit Other options available on request Nedouxfucjpfx An Uocu Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New state-of-the-art CNC cylindrical grinder control system with BEMA cylindrical grinding interface - Rebuilt control cabinet - New drive technology - Replacement of all electrical wiring, Berus pressure switch, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a basic license and various options depending on the machine’s equipment. Basic software - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zeroing - Grinding wheel zeroing - Measurement of dressing diamonds - Two form diamonds - One form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - Three flat dressers - Corrections - Z-position measurement (probe required) - GAP touch detection (touch dressing device required) OPTIONS at additional cost: Software for profile plunge grinding: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single and multi-start external and internal thread grinding with threads dressed on the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Non-circular grinding software: Non-circular grinding requires the workpiece axis to be equipped with a high-resolution rotary encoder to operate the axis as a C-axis. The non-circular...

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MT5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivelling 360° Grinding headstock swivelling 180° ± Grinding spindle speeds 1500, 1700, 2200 rpm Plunge feed: incremental 0–9.99 mm/Ø Plunge feed: continuous 0–9.99 mm/Ø Table swivelling ±8° Longitudinal table travel 1100 mm Table speed 0.02–6 m/min Workpiece weight between centres 130 kg Cross travel max. 270 mm Nodpfxsuxfups An Uscu Workpiece weight max. (flying) 130 kg incl. clamping Internal spindle mounting 80 mm Tailstock quill mounting MT3 Quill travel 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo shows a previously delivered machine. -The touch panel operation is extremely user-friendly. -The icons on the control panel are virtually identical to the original control, so no retraining is required. -Diagnostic function with display of PLC messages and digital I/Os. -Dressing function can be extended or modified to customer requirements. -Workpiece spindle oriented stop available on request. -New maximum infeed amount: 40 mm, extendable upon request. -Digital display on 2 axes. X-axis resolution 0.5 µm. Options: -Encoder with digital display on the workpiece headstock -Encoder with digital display on the grinding headstock (no height adjustment with spindle possible) -New stable internal grinding attachment diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for grinding spindle Includes: -Operating tools -Clamping tube for chuck Further accessories available upon request. The machine is equipped with an electronically controlled feed system in the X-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face and internal grinding in a single setup of individual parts. Available options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measuring control At the present time, the machine tool does not comply with the essential safety and protection requirements as specified in the BetrSichV 2015. The required minimum safety objectives must be determined by a risk assessment in accordance with the BetrSichV.

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Center height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Swiveling workpiece headstock: 360° Swiveling grinding headstock: ±180° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Workpiece weight max.—mounted: 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight (approx.): 2.5 t Space requirement (approx.): 4.2 x 2.0 m As a global leader in the field of Kellenberger overhauling / retrofit, we are able not only to deliver machines in like-new quality with warranty, but also provide service for your equipment. Geometrically overhauled and newly painted, with original electrics. The photo shows a 600U that was recently delivered. - Digital display on 2 axes. Resolution of X-axis: 0.5 μm Options: - Encoder with digital display on workpiece spindle headstock Nedpfxst Ii Nus An Uscu - Encoder with digital display on grinding spindle headstock (no height adjustment possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase in center height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories available on request. At present, the machine tool does not comply with the fundamental safety and protection requirements as stipulated in BetrSichV 2015 (Industrial Safety Regulations 2015). The necessary minimum safety objectives must be determined by a risk assessment according to BetrSichV.

Kondisi: bekas, Tahun pembuatan: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Longitudinal movement of the table: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (cantilevered): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Newly delivered to university. Taken over in 2018. Ncjdpfxsynmpgo An Uou Then fully serviced by BEMA and delivered to a single-person operator. The machine will now be serviced again and the table geometry reconditioned. 2-axis digital readout (Fagor) retrofitted. – Tailstock with fine adjustment – Internal grinding attachment – Coolant system Accessories available on request.

Kondisi: baik (bekas), Tahun pembuatan: 2000, Universal cylindrical grinding machine Studer S30 leanPRO Studer S 30 Year of manufacture: 2000 Machine hour meter Regular maintenance intervals by manufacturer (last maintenance 11/25, report available) Wheel replacement: According to manufacturer interval Hydraulics inspection: Annual inspection Buffer battery replacement: Included in Studer maintenance CNC control: FANUC 16T Ncsdpfsyx Hgzox An Ueu Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 125 mm Distance between centers: 650 mm Optional grinding cycles for increased center height Table adjustment: 11° Glass scale in X / Z axis Automatic paper band filter Workpiece spindle head: Approx. 1–1,000 rpm Internal grinding device with accessories LED spot with flexible arm Grinding wheel: 400 x 80 mm Frequency converter for external grinding spindle Grinding wheel flange Bore diameter: 127 mm Frequency converter for internal grinding spindle Workpiece weight: approx. 80 kg Live center and MK4 included for WSS Workpiece spindle nose: MK5 Tailstock: MK3 Quill stroke: 40 mm Machine weight: approx. 3,400 kg Floor dimensions (L x W): 2,300 x 1,550 mm Machine height: approx. 2,000 mm Electrical supply Measuring system: Digital Coolant supply with filter fleece, tank capacity 300L Machine hour meter (control on): 35,978 h

Kondisi: sangat baik (bekas), Tahun pembuatan: 1961, schwerdrehmaschine_martin_dlz502 Njdewfpiljpfx An Uocu

Kondisi: bekas, Tahun pembuatan: 1979, #ausladung-1600-mm-aufnahme-mk5-gewicht-3t Ncsdpfxoyigbco An Uou

Kondisi: baru, en-GB-001 Ncjdpovxgtisfx An Usu

Kondisi: baru, Tahun pembuatan: 2024, Special offer price €45,000 (instead of €52,500) excl. VAT. Immediately available! Included premium features: - Heidenhain ND5023 3-axis digital readout - 5-position longitudinal stop for the carriage - SRW-Amestra Multifix C quick-change tool post with 4 holders - LED work area lighting - Spinelli leveling pad set Standard features: - Double mechanical clutch - Electromagnetic brake - Rapid traverse - Air system on the tailstock to ease movement along the bed - Bed, legs, headstock, tailstock, and carriage made of cast iron - Bed guides are inductively hardened and ground - Headstock with induction-hardened and ground gears - Spindle mounted on high-precision bearings - Smooth carriage travel - Electrical cabinet with Siemens and/or Schneider components, dust- and moisture-proof - Spindle reduction sleeve - 2 dead centers - Chuck guard with microswitch, turret polycarbonate guard, full-length rear safety guard, leadscrew and feed rod protection, emergency stop button - Swarf tray on wheels - Coolant system with electric pump - Central lubrication of the slideways with automatic pump - Travelling and fixed steady rest - Service tools and wrenches, inspection certificate, electrical diagram, operating and maintenance manual - Machine built according to EC standards Ncsdjpq R Rdopfx An Uju Optional equipment: - 3-/4-jaw chuck Technical Data: - Center height: 260 mm - Swing over bed: 520 mm - Swing over carriage: 300 mm - Swing without bridge: 690 mm - Distance between centers: 1500 mm - Bed width: 400 mm - Spindle bore: 105 mm - Spindle nose: 11" Camlock - Spindle speed ranges: 12 - Spindle speed: 16 - 1200 rpm - Main motor power (S1 - 100%): 7.5 kW (optional 9.2 kW) - Longitudinal feed: (93) 0.028 - 6.43 / (65) 0.063 - 2.52 mm/rev - Cross feed: (93) 0.012 - 2.73 / (65) 0.027 - 1.07 mm/rev - Metric threads: (54) 0.5 - 224 / (22) 1 - 14 mm - Whitworth threads: (54) 1/8 - 72 / (25) 2 - 28 tpi - Module threads: (54) 0.5 - 112 / (18) 0.5 - 7 mm - Diametral pitch: (54) 1/4 - 64 / (24) 4 - 56 dp - Cross slide travel: 340 mm - Top slide travel: 150 mm - Tailstock quill diameter: 85 mm - Tailstock quill stroke: 200 mm - Tailstock quill taper: MT5 - Total weight: 3,200 kg

Kondisi: bekas, Tahun pembuatan: 2001, en Ncsdovf I Diepfx An Ueu

Kondisi: baru, Tahun pembuatan: 2024, CNC-Drehmaschine TCK 50A500 mit Schrägbett, 12-fach Revolver, hydraulischem Futter und Reitstock, Späneförderer sowie Teilefänger – die perfekte Maschine für Ihre Drehbearbeitung. Sie können zwischen der Standardausführung wählen oder gewünschte Optionen hinzufügen. Wir bieten wahlweise Steuerungen von GSK, Siemens oder Fanuc an. Max. Umlaufdurchmesser über Bett: 560 mm Nsdpfx Anjt Ef I Uj Ujcu Max. Umlaufdurchmesser über Schlitten: 260 mm Max. Werkstückdurchmesser (Planscheibe): 400 mm Max. Drehlänge: 500 mm Spindelaufnahme Typ: A2-6 Spindel-Durchgangsbohrung: 66 mm Stangendurchlass: 55 mm Hydraulisches Spannfutter: 10 Zoll Max. Spindeldrehzahl: 3000 U/min Reitstockhülsen-Durchmesser: 70 mm Reitstockhülsenaufnahme: MK5 Reitstockhübe: 80 mm Werkzeugträgeraufnahme: 25 mm Vierkant Hauptantriebsleistung: 11 kW Maschinengewicht (netto): 3000 kg Abmessungen (L×B×H): 2700×2000×2000 mm Für weitere Informationen kontaktieren Sie uns bitte. Außerdem bieten wir weitere CNC-Drehmaschinen mit Schrägbett, CNC-Flachbett-Drehmaschinen, Fräsmaschinen, CNC-Bearbeitungszentren, Bandsägen und CNC-Sägen auf Anfrage an.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Spindel kepala benda kerja: MK5 Tailstock: MK3 dengan penyetelan halus Tinggi pusat: 150 mm Jarak antara pusat: 680 mm Panjang penggerindaan: 620 mm Roda gerinda kiri: 350 x 50 x 127 Roda gerinda kanan: 250 x 25 x 127 Kebutuhan ruang mesin: 2340x1445x1900 mm Kondisi mesin: Mesin gerinda silinder ini dibongkar sepenuhnya, dibersihkan, dan dicat ulang. Semua komponen aus (termasuk spindel) diganti. Pengoperasian awal sesuai dengan protokol TSCHUDIN. Ncedpfx Ascgtp Een Ueu Perlengkapan mesin: - 2 pcs flens roda gerinda Ø 127 - 1 unit agregat hidrolik - 1 pcs spindel kepala benda kerja MK5 dengan pengunci tuas cepat - 1 pcs tailstock MK3 dengan penyetelan halus - 1 pcs display digital 2-sumbu - 1 pcs dresser lipat belakang - 1 set alat servis dan manual pengoperasian

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, fi Njdpfjcgkurox An Uocu

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 150 mm, panjang total: 620 mm, mechanics-all wear parts of the machine are replaced, including the X-axis adjustment spindle. All assemblies are brought to a like-new condition. After the overhaul, the machine is comparable to a new one. geometry-the machine is completely disassembled down to the guideways. Before restoring the geometry of the individual tables and assemblies, both X- and Z-axis guideways are hand-scraped and restored to an as-new condition. Upon completion, the machine receives a measurement protocol according to manufacturer specifications. painting-after the geometry restoration, the machine is prepared for repainting. All housings, tables, and the machine bed are stripped of old paint, cleaned, and repainted. hydraulics-the entire lubrication system, including lubrication unit, is replaced. The hydraulic unit is also completely overhauled. conventional internal cylindrical grinding machine TSCHUDIN HTG 610I equipment of the machine: technical data: center height: 150 mm distance between centers: 680 mm Ncodourw Uyjpfx An Uou grinding length: 620 mm machine weight and required space: 2,500 kg // 2,340 x 1,445 x 1,900 mm equipment of the machine (standard): 1 pc. workpiece spindle head MK5 1 pc. control panel 1 pc. mount for internal grinding spindle 1 pc. speed control device for belt spindle (UJ50 / UJ80) FISCHER 1 pc. hydraulic unit optional: • digital 2-axis measuring system • freely adjustable speed (1–800 rpm) including soft start (higher speeds optional upon clarification of technical details) • separate low-speed setting for part alignment

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2026, tinggi pusat: 100 mm, lebar di tengah: 680 mm, panjang total: 620 mm, diameter penggilingan: 199 mm, en1 Ncodev Hqlrspfx An Ueu