Beli Omec 750 bekas (7)

Kondisi: sangat baik (bekas), OMEC 750 CE Drawer Joint Milling Machine Machine designed for producing joints for drawers, boxes, and similar applications. The operator loads two workpieces simultaneously; the machine then automatically mills along the entire length. - Spindle mounted on an eccentric shaft - Milling motor power: 1.1 kW - Spindle speed: 18,000 RPM Rjdpstq U Acofx Ahvon - Two working speeds: 25 and 35 cycles/min Processing Parameters: - Front thickness (min/max): 7/60 mm - Side wall thickness (min/max): 10/30 mm - Dado height (min/max): 6/18 mm - CE Certificate - Machine dimensions: 1300 x 700 x 1200 (H) mm

Kondisi: hampir baru (bekas), lebar kerja maksimum 900 mm tinggi kerja maksimum 180 mm panjang mesin 5500 mm Rodpfeyf E Hxex Ahvsn mata gergaji 550 mm berat 400 kg motor 7,5 kW tahun 2001

Kondisi: baru, Rolling Bending Machine OMEC 3-Roll Mechanical Symmetric Double Pinch Brand New “CE” Rodpfx Ahegyk S Ajvon Made in Italy WORKING WIDTH: 2050 mm UPPER ROLL DIAMETER: 150 mm LOWER ROLL DIAMETER: 150 mm SIDE ROLL DIAMETER: 150 mm MAX BENDING THICKNESS 1.5 x D: 4 mm MAX BENDING THICKNESS 3 x D: 4.5 mm MAX BENDING THICKNESS 5 x D: 5 mm MACHINE DIMENSIONS: 920 x 3400 x 1100 mm TOTAL INSTALLED POWER: 6.5 kW WEIGHT: 1700 kg The FX3-3 series distinguishes itself as the OMEC mechanical asymmetric 3-roll plate bending machine with simple, complete initial pinch. The side roll (bending roll) is standard with steel supports and bearings, while bronze external slideways ensure maximum reliability and minimal friction over time. The rotation of the rolls is applied to the UPPER and LOWER rolls by means of gear reduction and self-braking motor; translation and sheet clamping mechanisms use top-brand motors and reducers. Equipped with induction-hardened rolls, motorized translation and clamping systems, readiness for profile bending rollers and conical device directly integrated in the upper roll, these machines represent the ideal compromise between absolute quality and operator ease for cylindrical and conical rolling operations. By standard, side extraction of the rolled shell occurs via the lateral opening of the upper roll. MACHINE CONFIGURATION: - MOTORIZED UPPER and LOWER ROLL rotation with equal power. - MOTORIZED SIDE ROLL up/down movement. - MOTORIZED SHEET CLAMPING. - DIGITAL READOUT for side roll position. - DIGITAL READOUT for sheet clamping position. - INDUCTION-HARDENED ROLLS: HRC 55/60, depth 2 mm. - Side roll supports in steel + shielded bearings + external bronze slideways. - INCLINATION PRE-SETTING for side roll(s) for cone production (cone device excluded). - EXTERNAL SIDE ROLL INCLINATION CONTROL LEVER (right side) for FX3.2/FX3.3 – (right + left) for FX4.1/FX4.2. - PREPARED FOR PROFILE-BENDING ROLLS. - 2-PEDAL FOOTSWITCH with side roll up/down and sheet clamping commands + Emergency stop mushroom. - ELECTRONIC PHASE CONTROL for the power feed. - ELECTRIC CABINET compliant with CE regulations. INCLUDED WITH THE MACHINE: - Front conical device on upper roll. - Digital readout for the side roll position. - Digital readout for sheet clamping position.

Kondisi: baru, The manual milling machine Omec 650-M is designed for producing dovetails on drawers and various furniture components. The machine is equipped with a spindle unit featuring a cutter, which allows the creation of dovetails with different heights. The machine can cut four types of dovetails with different pitches. Clamping and unclamping of the workpieces is performed manually using eccentric shafts. Operation (on/off) is managed via an overload relay on the motor terminal board and handwheels with levers mounted on the sides of the machine. The machine is manufactured in accordance with CE standards. Technical data: - Connected load: 0.75 kW, 400 V, 50 Hz - Number of spindles: 1 - Spindle speed: 16,500 rpm - Standard dovetail pitch: 25 / 40 / 50 / 60 mm - Machine weight: 100 kg - Footprint (L x W x H): 450 x 540 x 1420 mm Workpiece dimensions: - Workpiece length: 200 – 1500 mm - Workpiece width: 60 – 280 mm - Dovetail height: 5 – 18 mm - Workpiece thickness: 7 – 45 mm The machine is supplied with the following standard components: - Eccentric HSS cutter mounted on the machine Redjdcdwbepfx Ahvsn - Set of tools for adjustment and maintenance - Operating manual.

Kondisi: sangat baik (bekas), OMEC TA185 crosscut saw Maximum cutting height: 180 mm Maximum cutting width: 900 mm Saw blade diameter: 550 mm Pneumatic material clamp Pneumatic saw feed Saw operation via two-button control Main motor power: 7.5 kW 2x roller tables, each 160 cm in length CE certificate Redpjrk Nxgefx Ahvsn Technical documentation

Kondisi: baik (bekas), 0125 Marke: OMEC – ITALIEN Modell: F8 – CE-Norm Automatische Zinkfräsmaschine für Schwalbenschwanzverbindungen an Schubladen und diversen Möbelteilen – CE-Norm Die Maschine ist mit einer Einheit aus 8 Spindeln mit identischen Fräsköpfen ausgestattet, die die Herstellung von Aussparungen in unterschiedlichen Höhen ermöglichen. Rodpfxowl Iv Re Ahven Technische Daten: Anzahl der Spindeln: 8 Spindeldrehzahl: 17.000 U/min Maximale Arbeitsbreite: 400 mm Abstand zwischen den Zentren der Aussparungen: 25 mm Schubladenproduktion: 120 Stück/Stunde Leistung: 7,5 kW Arbeitsdruck: 6 bar Abmessungen (L x B x H): 1.500 x 1.000 x 1.200 mm Gewicht: 1.100 kg

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, Calendering machine with 4 rolls OMEC. Ready for delivery, subject to prior sale. Model FX4.90.1330. Double pre-bending. Working width: 1330 mm. Upper and lower roll diameter: 90 mm. Side roll diameter: 95 mm. Bending thickness: 2 – 2.5 – 3 mm. (1.5 x D – 3 x D – 5 x D) Upper and lower rolls motorized with equal power. Motorized ascent/descent for side rolls. Frontal opening of the upper roll. Roll surface induction hardened HRC 55/60, depth 2 mm. Special bearings for side rolls. External lever for roll inclination adjustment. Sheet clamping with bearing device. 2-pedal foot control. Electric panel compliant with "CE" standards. mm scale indicator for sheet clamping gauge. 4-ROLL MECHANICAL PLATE ROLLING MACHINE with full double pre-bend and front opening release. The upper roll is fixed while the lifting and lowering movement is applied to the side and lower rolls. Sheet clamping is very simple because once the sheet is inserted between the upper and lower rolls, the lower roll ascends and locks the sheet in place. Power: 1.8 kW Dimensions (mm): 800 x 2100 x H 1300 Weight: 625 kg Standard equipment supplied with the machine: Rsdpfx Ahjfh Skpsven - Frontal conical bending device on the upper roll. - 2 digital position readouts for side rolls. - Grinding/turning of the rolls after hardening treatment. - Roll induction hardening.