Beli Optimum Sar 1000 bekas (130)

Kondisi: baru, Tahun pembuatan: 2025, Heavy, robust cast iron construction High running smoothness thanks to ground, oil-bath lubricated gearbox gears Right-/left-hand rotation Automatic quill feed with manual fine adjustment Motorized Z-axis positioning Motorized table feed on X-axis Coolant system Machine lamp Gear head swivels ± 60° Adjustable gib strips Massive dovetail guide for the column, hand-scraped, for maximum stability and precision Height-adjustable, large protective screen with microswitch Drilling depth stop Digital position display DRO 5 Drilling / tapping function Heavy-duty, large-size cross table, precisely machined surface with T-slots and adjustable gib strips Heavy cast iron machine base with chip tray Single-stage industrial quality electric motor Wide speed range from 60 to 2,760 rpm via 2 steplessly adjustable speed modes Dimensions and Weights Length approx. 1600 mm Width/depth approx. 930 mm Height approx. 2110 mm Weight approx. 495 kg Drilling and Milling Capacity Max. cutter head size: 63 mm Max. shank cutter size: 26 mm Drilling capacity steel (S235JR): 24 mm Continuous drilling capacity steel (S235JR): 20 mm Electrical Data Connection voltage: 230 V Mains frequency: 50 Hz Electrical connection Total connected load: 1.5 kW Horizontal milling table Length: 800 mm Width: 240 mm Knsdpog U Uv Usfx Aahof Max. distance vertical spindle - milling table: 420 mm T-slot size: 14 mm Number of T-slots: 3 T-slot spacing: 80 mm Standards and Approvals Standard: DIN EN 55011 EMC class: C2 Travel X-axis manual: 560 mm Y-axis manual: 195 mm Z-axis manual: 350 mm X-axis automatic: 480 mm Vertical spindle Outreach: 258 mm Spindle taper: MT 4 Spindle speed range: 60 – 2760 rpm Number of speed ranges: 2 Speed adjustment control: electronic Drawbar: M16 Milling head swivel range Z - X plane: ± 45° Quill diameter: 75 mm Quill stroke: 120 mm Location: Ex-stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, For information on delivery times and up-to-date prices, please contact us directly. Industrial motor Quiet-running spindle thanks to new spindle design Machine operation with 24 V DC safety circuitry Guaranteed spindle concentricity ≤ 0.02 mm measured at the drill spindle Forward/reverse operation Kodoq T Ruhspfx Aahonf Precision spindle bore Control panel with user-friendly, dirt- and water-resistant membrane keypad Speed display Separate emergency stop switch Tapping function Precisely manufactured, sturdy drill table with diagonally arranged T-slots and all-round coolant channel, tiltable to ±45° to the side and rotatable 360° Digital depth gauge LED machine light integrated in the drill head V-belt guard with safety switch Thick-walled steel column for high load capacity and stability Massive, large-sized base plate with T-slots Heavy-duty construction of the entire machine

Tahun pembuatan: 2015, Kondisi: bekas, Grinding wheel diameter max. 150 mm Speed 2850 rpm Total power requirement 0.45 kW Dimensions 465 x 316 x 302 mm Weight 10.7 kg NEW PRICE: ~ 200.00 EURO Kjdpfxowp S U Ej Aahjnf Description - Double-ended bench grinders from OPTIMUM – a quality product for trade and industry - Heavy-duty, durable industrial design with maintenance-free motor for continuous operation - Housing made from die-cast aluminium - Long service life and smooth running thanks to balanced rotor with high-quality ball bearings - Spark guards on each grinding wheel reduce spark emission - Sturdy, adjustable workpiece support - Shatterproof safety screens - Vibration-absorbing rubber feet - Two universal corundum grinding wheels

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: belum diuji, diameter pembubutan di atas alas geser: 560 mm, tinggi pusat: 280 mm, lebar di tengah: 1.420 mm, kecepatan rotasi (maks.): 1.600 rpm, berat keseluruhan: 2.300 kg, For sale is an Optimum TH5615 lead screw/feed screw lathe from 2015 (7.5 kW). Designed for precision turning of single parts, small batches, or repair components. With a center height of 280 mm, a center distance of 1,420 mm, a maximum spindle speed of 1,600 rpm, solid construction, and a robust 7.5 kW motor, it is ideal for professional workshops, vocational training centers, or manufacturing operations with high quality standards. The machine is in age-appropriate condition, has not been tested, and is sold as is. Our service promise: Quality, expertise, and customer satisfaction are our top priorities. Our team comprises qualified and experienced technicians specializing in Mazak machines as well as other brands. We place great importance on personal support and are happy to assist you at any time, even after your purchase. With us, your machines are in the best hands – professional, reliable, and passionate about engineering! PS CNC Service Germany GmbH & Co. KG Knodpfx Aasxyx E Nehof All information without guarantee.

Tahun pembuatan: 2017, Kondisi: siap digunakan (bekas), 265dc502 Ksdpfx Aexyk Uceahjnf

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Manufacturer: Optimum Year of manufacture: 2024 Condition: as new, workshop-inspected Delivery time: immediately available Technical Specifications Centre height: 165 mm Distance between centres: 830 mm Swing over bed: 330 mm Swing over cross slide: 208 mm Turning length in bed bridge: 430 mm Spindle speed range: 16 steps, 70–2000 rpm Drive motor: 1.5 kW, 400 V, 50 Hz Spindle mount: Camlock DIN ISO 702-2 No.4 Spindle bore: 38 mm Spindle taper: MT5 Knsdoxyknispfx Aahjf Tailstock taper: MT3, quill stroke 110 mm Weight: approx. 512 kg Machine dimensions (LxWxH): 1685 × 745 × 1590 mm Threads and Feeds Metric: 0.4–7 mm/rev (26 thread pitches) Imperial: 56–4 TPI (34 thread pitches) Longitudinal feed: 0.052–1.392 mm/rev (32 feeds) Cross feed: 0.014–0.38 mm/rev (32 feeds) Accessories: - Fixed steady rest (Ø 6–50 mm) - Travelling steady rest (Ø 8–30 mm) - LED machine light - Reducing sleeve MT5/MT3 - Two fixed centres MT3 - Four-way tool post 16 mm - Change gear set - Machine base - Initial fill with high-quality oil - Operating tools

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Optimum D 1340 GDE, year 2001, in excellent condition – previously a school machine – Swing over bed: 330 mm Swing over cross slide: 160 mm Turning length: 800 mm Total power requirement: 2 kW Machine weight approx.: 400 kg Space requirements approx.: 2000 x 1000 x 1600 mm Bar capacity: 38 mm Spindle speed range: 70 – 2000 rpm Spindle nose: Feed range: 0.025 – 2.553 mm/rev Thread cutting capability: Metric: 0.25 – 11 mm Imperial: 4 – 112 TPI Tailstock: MT 3 Controls: conventional Ksdpfx Aaevutyhjhsnf 3-jaw chuck Location: in stock, 54634 Bitburg - Available at short notice -

Kondisi: baru, Tahun pembuatan: 2025, For current prices and delivery times, please inquire. Dimensions and Weights: Length (product): approx. 4450 mm Width/Depth (product): approx. 1150 mm Height (product): approx. 1650 mm Weight (net): approx. 3000 kg Working Ranges: Center height: 280 mm Distance between centers: 2910 mm Swing over bed: 560 mm Swing over gap: 790 mm Swing over cross slide: 355 mm Turning length in gap: 170 mm Bed width: 350 mm Speed Range: Number of speed ranges: 12 Spindle speed range: 25 – 1600 rpm Electrical Data: Main motor power: 7.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Coolant System: Coolant pump motor output: 125 W Spindle: Spindle mount: Camlock DIN ISO 702-2 No. 8 Spindle bore/bar capacity diameter: 80 mm Tool post mounting height: max. 25 mm Spindle taper: MT 7 Kodpfxsq Ukc Ro Aahonf Tailstock: Tailstock quill taper: MT 5 Tailstock quill travel: 180 mm Tailstock quill diameter: 75 mm Threads: Metric thread pitch: 0.2 – 14 mm/rev Number of metric pitches: 47 Inch thread pitch: 112 – 2 TPI Number of inch pitches: 60 Diametral pitch: 4 – 112 DP Number of diametral pitches: 50 Module thread pitch: 0.1 – 7 mm/rev Number of module pitches: 34 Traversing Distance: Top slide travel: 130 mm Cross slide travel: 316 mm Carriage travel: 2710 mm Feed: Longitudinal feed range: 0.059 – 1.646 mm/rev Number of longitudinal feeds: 35 Cross feed range: 0.020 – 0.573 mm/rev Number of cross feeds: 35 Electrical Connection: Total connected load: 8.5 kW

Kondisi: baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 550 mm, jarak lintasan sumbu Y: 305 mm, jarak gerak sumbu Z: 460 mm, gerak cepat sumbu X: 10.000 m/menit, pergeseran cepat sumbu Y: 10.000 m/menit, pergerakan cepat sumbu Z: 10.000 m/menit, tinggi total: 2.200 mm, lebar total: 1.860 mm, panjang total: 2.164 mm, lebar meja: 320 mm, panjang meja: 800 mm, jenis arus masuk: AC (pendingin udara), kecepatan rotasi (maks.): 10.000 rpm, kecepatan rotasi (min.): 10 rpm, beban meja: 300 kg, berat keseluruhan: 2.800 kg, Perlengkapan: dokumentasi / manual, Mesin frais berfungsi penuh dengan berbagai aksesori dan manual. Knjdpsw U Rdnjfx Aahof

Kondisi: bekas, Tahun pembuatan: 2019, translation Kedpjww Nb Sjfx Aahenf

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), de-to-hu-it-lt-lv-nb-nl-pl-001 Kjdpfx Aexx Udloahjnf

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, en-001 Knsdpfjw Ebngex Aahof

Kondisi: baru, Tahun pembuatan: 2025, Optimum Gear-Driven Metal Band Saw OPTIsaw SD 200V For demanding sawing applications Item no.: 3300205 DESCRIPTION - Low-noise operation - Sturdy cast-iron construction Kedpfev Sg T Njx Aahonf - Saw bow descent infinitely adjustable via hydraulic cylinder with throttle valve - Microswitch for automatic end stop - Clearly readable scale for angle adjustment - Supplied as standard with high-quality bi-metal saw band - Saw blade tension can be adjusted from the front via handwheel - Ball-bearing saw blade guide - Robust machine base with large wheels and ergonomic transport handle for easy relocation - Adjustable material stop for batch work - Safety switch for saw band cover - Fully equipped, allowing the user to begin productive work immediately after commissioning TECHNICAL DATA Dimensions and weights - Length (product): approx. 1382 mm - Width without material stop: approx. 434 mm - Width/depth (product): approx. 533 mm - Width with material stop: approx. 533 mm - Height (product): approx. 1200 mm - Height, lower end position: approx. 790 mm - Height, upper end position: approx. 1200 mm - Weight (net): approx. 130 kg - Height of work table: 530 mm Electrical data - Drive motor power: 0.75 kW - Supply voltage: 230 V - Mains frequency: 50 Hz - Coolant pump motor: 100 W Machine data - Saw blade speed: 26 – 80 m/min - Saw blade length: 2360 mm - Saw blade width: 19 mm - Saw blade thickness: 0.9 mm - Cutting angle: 0 – 45° - Feed rate: steplessly adjustable - Saw bow lifting: manual Cutting capacities - Cutting capacity 0° round (solid): 180 mm - Cutting capacity 0° square (solid): 180 mm - Cutting capacity 0° rectangle vertical (solid): 180 x 240 / 50 x 300 mm - Cutting capacity +45° round (solid): 110 mm - Cutting capacity +45° square (solid): 150 mm - Cutting capacity +45° rectangle vertical (solid): 110 x 170 mm SCOPE OF DELIVERY - Material stop - Bi-metal saw band - Machine base

Kondisi: baru, Tahun pembuatan: 2025, For information regarding delivery times and up-to-date pricing, please inquire directly. Dimensions and Weights: Length (product): approx. 1760 mm Width/Depth (product): approx. 745 mm Height (product): approx. 1320 mm Weight (net): approx. 469 kg Max. height (product): approx. 1590 mm (DPA) Working Ranges: Centre height: 165 mm Centre distance: 1000 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 216 mm Bed width: 190 mm Speed Range: Number of speed ranges: 9 steps Speed range: 65 – 2000 rpm Electrical Data: Drive motor output: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Spindle: Knodpfx Aaeq T R Aajhsf Spindle mount: Camlock DIN ISO 702-2 No. 4 Spindle bore/bar capacity: diameter 38 mm Max. toolpost mounting height: 16 mm Spindle taper: MT 5 Tailstock: Tailstock taper: MT 3 Tailstock quill travel: 100 mm Tailstock quill diameter: 38 mm Threads: Metric thread pitch: 0.4 – 10 mm/rev Number of metric thread pitches: 29 Inch thread pitch: 56 – 4 TPI Travel: Cross slide travel: 90 mm Compound slide travel: 168 mm Bed slide travel: 850 mm Feed: Longitudinal feed range: 0.02 – 0.4 mm/rev Number of longitudinal feeds: 24 Face feed range: 0.01 – 0.2 mm/rev Number of face feeds: 32

Kondisi: siap digunakan (bekas), entry1 Knsdoxxbaaspfx Aahsf

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The machine is on display and has only been used for demonstration purposes. Optiturn L44 CNC Premium CNC Lathe directly from the manufacturer. L44 CNC – The OPTIMUM Premium CNC Turning Machine with Siemens SINUMERIK 828D control impresses with its performance, speed, precision, and long service life. Dimensions and Weights Max. Width/Depth: 2300 mm Knodew Ea Tuspfx Aahsf Length approx.: 2530 mm Width/Depth approx.: 1595 mm Height approx.: 1795 mm Weight approx.: 2600 kg Working Areas Chuck diameter: 150 mm Chuck actuation: hydraulic Center height: 223 mm Distance between centers: 850 mm Swing over bed: 446 mm Swing over gap: 520 mm Swing over cross slide: 240 mm Bed width: 300 mm Axis Drive Torque X-axis: 6 Nm Z-axis: 8.5 Nm Speed Range Number of speed ranges: 1 Speed range: 10 – 3000 rpm Electrical Data Drive motor power: 7 kW Connection voltage: 400 V Mains frequency: 50 Hz Total connected load: 23 kVA Precision Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Hydraulic System Motor power: 0.75 kW Tank capacity: 50 l Coolant System Coolant pump power: 270 W Tank capacity: 90 l Machine Data Spindle bore diameter: 40 mm Motor(s) Drive motor torque: 33 Nm Tailstock Taper: MT 4 Quill stroke: 165 mm Quill diameter: 52 mm Spindle Spindle nose: DIN ISO 702-1 No. 5 Spindle bore/bar capacity diameter: 52 mm Control Type: Sinumerik 828D PPU 240 System software: SW 24 CNC memory: 3 MB Look Ahead: 50 Block change time: 3 ms Number of tools: 128 Travel X-axis: 250 mm Z-axis: 760 mm Vertical Spindle Drive motor power (continuous S1): 7 kW Drive motor power S6-30% duty cycle: 16 kW Drive motor torque: 33 Nm Drive motor torque S6-30% duty cycle: 80 Nm Feed Rate X-axis: 15,000 mm/min Z-axis: 15,000 mm/min Feed Force Feed force X-axis: 7.5 kN Feed force Z-axis: 5.3 kN Tool Changer Type: hydraulic; VDI 30 Number of tool stations: 8 Maximum tool size (square): 20 x 20 mm Maximum boring bar diameter: 25 mm SIEMENS SAFETY INTEGRATED Equipment Main Spindle • Robust design Machine Bed • Heavily ribbed • High rigidity and durability Guides • Stable flatbed guides Ball Screws • For high rapid traverse speeds on all axes • Reduced wear • High positioning and repeat accuracy Cast Body • Hardened to HRC48-52 and heat-treated Machine Feet • Six pieces • Optimal machine leveling Heat Exchanger • Enclosed control cabinet with intelligent cooling management • Optimum temperature even at high ambient temperatures Tool Change System • Eight tool stations • Hydraulic VDI30 tool changer • Max. tool height 20 mm Hydraulic Unit • Motor power 750 W • Tank capacity 50 liters • Clamping/operating pressure 2,500 – 2,942 kPa Three-jaw Chuck • Hydraulic three-jaw chuck Ø 150 mm • Hydraulic clamping and release via foot switch • Easy clamping of workpieces • Hard and soft block jaws Central Lubrication System • Automatic interval lubrication • Reduces wear on bearings, guides, and ball screws • With float switch. An acoustic signal sounds when oil level is too low

Kondisi: baru, Tahun pembuatan: 2025, For information on delivery times and current daily prices, please inquire directly. Drill Table: Working Surface Length: 387 mm Working Surface Width: 387 mm Type of T-slots: diagonal T-slot Size: 14 mm Number of T-slots: 2 Max. Distance Spindle to Drill Table: 775 mm Speed Range: Ksdpeq T Rx Esfx Aahonf Speed Range: 70 – 2,800 rpm Number of Speed Steps: 9 Speed Control: infinitely variable Electrical Data: Drive Motor Power: 1.1 kW Connection Voltage: 400 V Mains Frequency: 50 Hz Machine Base: Max. Distance Spindle to Base: 1,300 mm Base Working Surface Length: 270 mm Base Working Surface Width: 327 mm Base T-slot Size: 16 mm Number of Base T-slots: 2 Base T-slot Spacing: 150 mm Spindle: Quill Stroke: 125 mm Spindle Taper: MT 4 Throat Depth: 270 mm Drill Head Rotation: 360° Drill Head Tilt: 45°

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F50 E CNC milling machine direct from the manufacturer. F50 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control system stands out for its performance, speed, precision, and long service life. • Column-type cast iron construction for high rigidity • Carousel-type tool changer with eight tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive on all axes (closed-loop control) • Maximum spindle speed of 10,000 rpm • Portable electronic handwheel with enabling button and emergency stop switch greatly facilitates program setup • Coolant system with 70-liter coolant tank • Tool changes performed automatically or at the push of a button (electropneumatic tool clamping system) • Large, precise milling table – generously dimensioned and precision surface-machined • Access doors designed especially wide to minimize cleaning and maintenance time • LED machine light for full illumination of the working area • SIEMENS material defect warranty and free on-site service OSS package included SINUMERIK 808D features • Identical software package for consistent control operation • LED tool number display • MCP with rotary switches for feed and spindle override • Absolute encoders – no reference run required • Enhanced accuracy Control • 8.4” LCD color display with 800 x 600 resolution SIEMENS OSS package • 12 months; item no. 3589010 • 36 months; item no. 3589012 Dimensions and weights Length approx. 2030 mm Width/depth approx. 1600 mm Height approx. 1980 mm Weight approx. 1900 kg Electrical data Connection voltage 400 V Line frequency 50 Hz Total connected load 10 kVA Horizontal milling table Length 690 mm Width 225 mm Vertical spindle – table distance min. 90 mm Vertical spindle – table distance max. 410 mm T-slot size 14 mm Number of T-slots 3 T-slot pitch 63 mm Max. load 150 kg Accuracy Repeatability ± 0.015 mm Positioning accuracy ± 0.015 mm Pneumatic connection Operating pressure 6 bar Travel X-axis automatic 330 mm Y-axis automatic 220 mm Z-axis automatic 320 mm Spindle – column distance min. 280 mm Spindle – column distance max. 280 mm Kjdpfx Aasw Ea Swehenf Vertical spindle Spindle taper BT 30 Speed range 10000 rpm Drive motor power S1 continuous 3.7 kW Drive motor power S6-30% duty 5.5 kW Drive motor torque S1 continuous 24 Nm Drive motor torque S6-30% duty 36 Nm Feed rate X-axis 15000 mm/min Y-axis 15000 mm/min Z-axis 15000 mm/min Feed motor torque X-axis S1 continuous 3.5 Nm Y-axis S1 continuous 6 Nm Z-axis S1 continuous 6 Nm Tool changer Type Carousel Number of tool stations 8 stations Max. tool diameter 100 mm Max. tool length 200 mm Max. tool weight 6 kg Tool-to-tool change time 7 s

Kondisi: baru, Tahun pembuatan: 2025, For up-to-date prices and delivery times, please inquire. Dimensions and Weights: Length (product): approx. 3265 mm Width/Depth (product): approx. 1065 mm Height (product): approx. 1550 mm Net weight: approx. 1965 kg Working Ranges: Center height: 230 mm Center distance: 2060 mm Swing diameter over bed: 460 mm Swing diameter over bed bridge: 690 mm Ksdpfx Aajq Ukbpehsnf Swing diameter over cross slide: 270 mm Turning length in bed bridge: 240 mm Bed width: 300 mm Speed Range: Number of speed ranges: 12 Spindle speed range: 25 – 2000 rpm Electrical Data: Drive motor power: 5.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Cooling lubricant system Coolant pump power: 125 W Spindle: Spindle mount: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar feed diameter: 58 mm Maximum toolholder height: 25 mm Spindle taper: MT 6 Tailstock: Tailstock taper: MT 4 Tailstock quill stroke: 130 mm Tailstock quill diameter: 60 mm Thread Pitches: Metric pitch: 0.1 – 14 mm/rev Number of metric threads: 41 Inch pitch: 112 – 2 TPI Number of inch threads: 41 Diametral pitch: 4 – 112 DPI Number of diametral pitches: 50 Module thread pitch: 0.1 – 7 mm/rev Number of module threads: 34 Travel: Top slide travel: 125 mm Cross slide travel: 285 mm Carriage longitudinal travel: 1805 mm Feed: Longitudinal feed range: 0.031 – 1.7 mm/rev Number of longitudinal feeds: 42 Facing feed range: 0.014 – 0.784 mm/rev Number of facing feeds: 42 Electrical Connection: Total connected load: 5.8 kW

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The machine is in showroom condition and was only used for demonstration purposes. Optimill F 80 CNC milling machine, directly from the manufacturer. • Bed-type machine made from cast iron for high rigidity Kedpfx Ajw Ea Rteahenf • Carousel tool changer with 12 tool positions • All linear guides with stainless steel covers • Automatic central lubrication system • Siemens main spindle motor • Siemens servo drives on all axes (closed-loop) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel with enabling switch and emergency stop makes program setup considerably easier SINUMERIK 808 ADVANCED CNC technology from the industry leader SINUMERIK 808D on PC • Identical control software package for simplified operation of the machine tool Compact and robust • With a panel-based CNC design featuring minimal interfaces and an IP65-rated control panel, the SINUMERIK 808D ADVANCED is perfectly suited for use in harsh environments Connectivity • Front panel USB (IP65) • Serial interface RS232C • RJ45 Ethernet on the rear • Technology-specific keyboard layout • Durable hard keys with protective membrane Dimensions and Weight Length approx. 1,995 mm Width/Depth approx. 1,930 mm Height approx. 1,640 mm Weight approx. 2,300 kg Rapid Traverse Speed X axis: 20 m/min Y axis: 20 m/min Z axis: 20 m/min Electrical Data Supply voltage: 400 V Frequency: 50 Hz Electrical Connection Total connected load: 12 kVA Horizontal Milling Table Length: 800 mm Width: 260 mm Vertical spindle-to-table distance, min.: 100 mm Vertical spindle-to-table distance, max.: 550 mm T-slot size: 16 mm Number of T-slots: 5 T-slot spacing: 50 mm Maximum table load: 200 kg Accuracy Repeatability: ± 0.01 mm Positioning accuracy: ± 0.01 mm Coolant System Pump power: 450 W Tank capacity: 80 l Pneumatic Connection Operating pressure: 7 bar Travel Distances X-axis (automatic): 450 mm Y-axis (automatic): 260 mm Z-axis (automatic): 450 mm Spindle-to-column distance, max.: 370 mm Vertical Spindle Spindle taper: BT 40 Speed range: 50 – 10,000 rpm Drive motor power, continuous (S1): 3.7 kW Drive motor power, 30% duty cycle (S6): 5.5 kW Drive motor torque, continuous (S1): 24 Nm Drive motor torque, 30% duty cycle (S6): 36 Nm Feed Motor Torque X axis, continuous (S1): 6 Nm Y axis, continuous (S1): 6 Nm Z axis, continuous (S1): 11 Nm Tool Changer Type: Carousel Number of tool positions: 12 Maximum tool diameter: 95 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Tool change time, chip to chip (C to C): 7 s

Kondisi: baru, Tahun pembuatan: 2025, For information on delivery times and up-to-date pricing, please contact us directly. Dimensions and Weights: Column diameter: 150 mm Length (product): approx. 880 mm Width/Depth (product): approx. 595 mm Height (product): approx. 2445 mm Weight (net): approx. 550 kg Drilling Capacity: Drilling capacity in steel (S235JR): 40 mm Continuous drilling capacity in steel (S235JR): 35 mm Thread cutting in steel (S235JR): M30 Drill Table: Table working surface length: 530 mm Table working surface width: 530 mm T-slot size: 18 mm Number of T-slots: 3 T-slot spacing: 125 mm Table rotation: 360° Table tilt: ± 90° Table load capacity: 250 kg Distance spindle – table max.: 740 mm Distance spindle – table min.: 130 mm Speed Range: Speed range: 30 – 2,430 rpm Number of speed ranges: 4 steps Ksdpfxsq T Ry Ue Aahsnf Speed control: electronic Electrical Data: Main drive motor power: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Machine Base: Distance spindle – machine base max.: 1,210 mm Base working surface length: 435 mm Base working surface width: 445 mm Base T-slot size: 18 mm Number of base T-slots: 2 Base T-slot spacing: 150 mm Spindle: Quill stroke: 170 mm Spindle taper: MT 4 Throat depth: 350 mm Automatic quill feed Quill feed rate: 0.1 – 0.2 mm/rev Quill feed rate steps: 3 steps Motor(s): Coolant pump drive motor power: 100 W

Kondisi: baru, Tahun pembuatan: 2024, For delivery times and up-to-date pricing, please make a direct inquiry. Dimensions and Weights: Length (Product): approx. 1935 mm Width/Depth (Product): approx. 780 mm Height (Product): approx. 1740 mm Weight (Net): approx. 765 kg Working Capacities: Centre Height: 200 mm Centre Distance: 1,000 mm Swing Diameter over Bed: 400 mm Swing Diameter over Cross Slide: 250 mm Speed Range: Number of Speed Ranges: 8 Speed Range: 70 – 2,000 rpm Electrical Data: Drive Motor Power: 2.2 kW Connection Voltage: 400 V Mains Frequency: 50 Hz Coolant System: Coolant Pump Motor Power: 100 W Spindle: Toolpost: SWH 3-E Spindle Mount: Camlock DIN ISO 702-2 No.5 Spindle Bore/Bar Capacity Diameter: 53 mm Spindle Taper: MT 6 Tailstock: Tailstock Taper: MT 4 Tailstock Quill Travel: 110 mm Thread Cutting: Kedpfx Asq T R Dmoahjnf Metric Thread Pitch: 0.4 – 7 mm/rev Number of Metric Threads: 32 Imperial Thread Pitch: 56 – 4 TPI Number of Imperial Threads: 31 Travel: Cross Slide Travel: 98 mm Compound Slide Travel: 185 mm Bed Slide Travel: 850 mm Feed: Longitudinal Feed Range: 0.014 – 0.38 mm/rev Number of Longitudinal Feeds: 26 Cross Feed Range: 0.052 – 1.392 mm/rev Number of Cross Feeds: 32 Tool Clamping: Toolholder Mounting Size: 16 mm Electrical Connection: Total Power Requirement: 3.0 kW

Kondisi: baru, Tahun pembuatan: 2025, New machine. Please inquire for the current daily price and delivery time. Dimensions and Weights: Length (product): approx. 2129 mm Width/Depth (product): approx. 1046 mm Height (product): approx. 1687 mm Weight (net): approx. 645 kg Electrical Data: Drive motor power: 3 kW Connection voltage: 400 V Mains frequency: 50 Hz Hydraulic pump motor power: 1.4 kW Coolant pump motor power: 100 W Total connected load: 3.8 kW Machine Data: Saw band speed(s): 20 – 80 m/min Saw band length: 3770 mm Saw band width: 34 mm Saw band thickness: 1.1 mm Cutting angle: -45 – 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting Capacities: Cutting capacity 0° round (solid material): 355 mm Cutting capacity 0° square (solid material): 300 mm Cutting capacity 0° rectangle vertical (solid material): 300 x 490 mm Cutting capacity -45° round (solid material): 290 mm Cutting capacity -45° square (solid material): 250 mm Cutting capacity -45° rectangle vertical (solid material): 250 x 250 mm Cutting capacity +45° round (solid material): 350 mm Cutting capacity +45° square (solid material): 290 mm Cutting capacity +45° rectangle vertical (solid material): 290 x 340 mm Cutting capacity +60° round (solid material): 230 mm Cutting capacity +60° square (solid material): 180 mm Cutting capacity +60° rectangle vertical (solid material): 180 x 220 mm Knjdpfx Aasrah S Hshof

Kondisi: baru, Tahun pembuatan: 2025, For delivery times and up-to-date pricing, please inquire directly. Condition: New machine Centre height: 200 mm Centre distance: 1,000 mm Spindle speed: 70 - 2,000 rpm (8 steps) Standard equipment includes: - 3-axis digital readout DPA 21 - Machine base - 3-jaw chuck 200 mm - LED machine light - Reducing sleeve MK 4/MK 6 - Fixed centre MK 4 - Fixed steady rest - Travelling steady rest Knjdpfxoq Ui Tds Aahsf - Quick-change toolpost body E - Tool holder ED - Chuck guard, electrically interlocked - Oil filling - Operating tools - Operating manual

Kondisi: baru, Tahun pembuatan: 2025, New machine. Please inquire for the current daily price and lead time. Dimensions and Weights: Length (product): approx. 1750 mm Width/Depth (product): approx. 1075 mm Height (product): approx. 1420 mm Net weight: approx. 550 kg Max. width/depth (product): approx. 1415 mm Max. height (product): approx. 2000 mm Electrical Data: Drive motor power: 2.2 kW Supply voltage: 400 V Mains frequency: 50 Hz Coolant pump motor power: 0.05 kW Machine Data: Bandsaw speed(s): 36 / 72 m/min Bandsaw length: 2925 mm Kedpfx Aorah R Tsahenf Bandsaw width: 27 mm Bandsaw thickness: 0.9 mm Cutting angle: -45° to +60° Feed: steplessly adjustable Raising of saw bow: manual Cutting Capacities: Cutting range 0° round (solid): 270 mm Cutting range 0° square (solid): 230 mm Cutting range 0° flat (solid): 230 x 350 mm Cutting range -45° round (solid): 230 mm Cutting range -45° square (solid): 170 mm Cutting range -45° flat (solid): 140 x 200 mm Cutting range +45° round (solid): 230 mm Cutting range +45° square (solid): 200 mm Cutting range +45° flat (solid): 210 x 220 mm Cutting range +60° round (solid): 140 mm Cutting range +60° square (solid): 140 mm Cutting range +60° flat (solid): 140 x 220 mm