Beli Pelat Tekan bekas (11.352)

Kondisi: bekas, Tahun pembuatan: 2024, Exhibition machine Garbsen – new, complete in standard configuration with: Gtsdpfx Adex Twc Ajtjt - Sturdy, torsion-resistant steel frame, welded and bolted design - Lamella press beam at the TOP with 6 elements, lamella press beam on the SIDE with 5 elements - Lamella press beams with proven tolerance compensation (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) consist of 38 mm thick, coated, continuous support panels - Continuous pressing surface with a height of 95 mm on the lower vertical press beam - Electromechanical adjustment of both press beams via precision trapezoidal screw spindles (with increased thread pitch and concentricity accuracy), and high-performance lead nuts with grease reservoir - Pressing occurs electromechanically, via 2 separate helical geared motors (2 x 0.75 kW) - Pressing force of the press beams is infinitely variable electronically via 2 potentiometers and regulated by frequency converters, providing completely wear-free press force control - Pressing force for horizontal press beam: min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press beam: min. 300 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning, adjustable by 3-stage selector switch 5 / 10 / 25 mm/sec - Extremely easy operation via 6 individual push buttons, 8 movement sequences selectable via control system - Freely adjustable pressing time preselection with automatic opening, 0–30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm - Electrical connection: 400V, 3Ph, 50Hz (3.2 kW, 16 A) - Weight: 2100 kg (net) - Dimensions: 3500x1200x2300 mm (L x W x H) Image includes special accessories Machine feet Surcharge for rapid traverse positioning per piece, for fast positioning of the press beams, controlled by automatic workpiece detection with sensors in the press beams; pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be deactivated for pressing special parts Set of machine feet for working height 500 mm per piece Location: Garbsen

Kondisi: bekas, Tahun pembuatan: 1994, Tekanan 600 t Langkah 100 mm Jumlah langkah 45 /menit Jarak antar tiang 580 mm Tinggi pemasangan 460 mm Luas meja 550 x 620 mm Luas pelat tekan 550 x 430 mm Penyesuaian pelat tekan 50 mm Daya penggerak 15,0 kW Berat 13,5 t Ruang yang dibutuhkan (PxlxT) 1,5 x 2,45 x 2,75 m Jarak gaya nominal 1,7 mm Gsdpjw U Ekpefx Adtstt Energi nominal 10,2 kJ dengan penggerak engkol, rem roda gila, kopling hidrolik, penyeimbangan rangka, kontrol dengan pengawasan mandiri

Kondisi: bekas, Kami menawarkan kepada Anda pelat penyeimbang bekas. Gtedpfxsx Trhts Adtet Data teknis pelat penyeimbang: Produsen: Meta Ruang lingkup pengiriman mencakup: 01x pelat penyeimbang, bekas Warna material: galvanis Sendzimir Dimensi: 140 x 140 mm Ketebalan material: sekitar 3,00 mm Diameter lubang: sekitar 11 mm Jarak antar lubang (tengah ke tengah): sekitar 90 mm Berat: 0,45 kg | per buah Kontak di perusahaan kami: Bapak Andre Evering Bapak Mario Klöver Bapak Falk Deutsch Informasi umum tentang barang: Barang ini hanya ditawarkan untuk diambil langsung di lokasi. Pengiriman atau transportasi tambahan atas permintaan akan dikenakan biaya tambahan yang dapat ditanyakan secara terpisah tergantung pada lokasi pengiriman atau volume pembelian.

Kondisi: bekas, Tahun pembuatan: 1995, de-1 Gtsdpfox Tu Szox Adtst

Kondisi: siap digunakan (bekas), Daya tekan: 250 t Panjang kerja maksimum: 4050 mm Gtjdpfxex Tr Uge Adtot dilengkapi dengan kontroler CYBELEC DNC 70 PSG

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jam operasional: 10 h, nomor mesin/kendaraan: RoboCone RC9, lebar kerja: 900 mm, tinggi total: 2.300 mm, masa garansi: 36 bulan, gaya penekanan: 22 t, jenis penyesuaian ketinggian: listrik, panjang kerja: 900 mm, Bending Cell RoboCone RC9 CoastOne - Made in Finland Complete bending cell with an electric press brake Cone C9 and a Yaskawa / Motoman GP25 (25 kg) robot. Gsdsvnb N Djpfx Adtjtt Pressing force: 22T Bending length: 900 mm Spindles: 1x22T Control: TC15-2D graphic 36 months warranty after installation Delivery not included; available immediately Inspection under power possible at any time by appointment!

Kondisi: bekas, Tahun pembuatan: 1997, Pressing force: 1000 t Clearance between uprights: 1260 mm Stroke: 315 mm Stroke rate: 10, 21 - 42 /min Distance table/ram, large stroke at top, adjustment at top: 1295 mm Table surface: 1250 x 800 mm Table height above floor: 670 mm Lateral clearance between uprights: 830 mm Ejector force in table: 63 t Ejector stroke in table: 75 mm Ejector force in ram: 16 t Ejector stroke in ram: 23 mm Ram surface: 1250 x 800 mm Ram adjustment: 20 mm Transfer feed length: 0 - 250 mm Programmable slide travel per guide: 0 - 140 mm Transfer device stroke rate: 42 /min Drive power: 135.0 kW Weight: 120.0 t Space requirements (W x D x H): 5.9 x 4.8 x 7.95 m Godpfevuukusx Adtjtt Height above floor: 6.95 m Height below floor: 1.0 m with DC drive, pneumatic clutch, motorized ram wedge adjustment, pneumatic ram weight compensation, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram locking, tool clamping system for table and ram, motorized central lubrication, oil impulse lubrication, grease lubrication Press control: Siemens S5 - CNC 2-axis transfer (manufacturer Dreher, type STV-D model 350/100-SO, year 2008), control Siemens S7 - Cleaning system (manufacturer Beyss, year 1989) as is and lies, WITHOUT commissioning, disassembled and stored The press was installed in a soundproof cabin by the previous owner, which is not included in the scope of delivery Video of the machine prior to disassembly available

Kondisi: bekas, Tahun pembuatan: 1991, Pressure: 500 t Upright spacing: 3,200 mm Stroke: 1,250 mm Distance table/ram, max. stroke up, adjustment up: 1,810 mm Table size: 3,000 x 1,900 mm Cushion pressure in ram: 150 t Cushion stroke in ram: 200 mm Cushion area in ram: 2,400 x 1,200 mm Ram area: 3,160 x 1,900 mm Downstroke speed: from 400 mm/s Return stroke speed: 250 mm/s Working speed: 18 - 58 mm/s Height above floor: 6.5 m Drive power: 90.0 + 36.5 kW Gtodpfsvuk Txex Adtjt Weight: 110 t Approved for manual loading operations according to German accident prevention regulations (UVV) Features: - Oil-hydraulic drive - Hydraulic cushion in ram - Ram lock Year of construction: 1976 – Modernized: 1991 Condition: As is, not commissioned, partially disassembled and stored

Kondisi: bekas, Tahun pembuatan: 1988, Pressing force: 315 t Distance between uprights: 1350 mm Stroke: 600 mm Distance table/ram, max. stroke up, adjustment up: 1000 mm Table surface: 1200 x 1300 mm Table height above floor: 1245 mm Lateral upright clearance: 1250 mm Ram surface: 1200 x 1300 mm Advance speed: from 750 mm/s Return speed: 680 mm/s Working speed: 180 mm/s Gtodpfxjvuk Rqo Adtot Oil capacity: 2000 l Drive power: 150.0 kW Weight: 35.0 t Space requirement (W x D x H): 3.3 x 3.3 x 5.5 m Height above floor: 5.5 m Approved for manual loading operations in accordance with German accident prevention regulations (UVV) Equipped with oil-hydraulic drive, pressure/time and stroke-dependent control, hydraulic punching damping with motorized stroke limitation, hydraulic ram lock As is, ex location, NOT commissioned

Kondisi: bekas, Tahun pembuatan: 1998, Pressure: 315 t Stroke: 500 mm Throat depth: 425 mm Installation height: 1000 mm Table size: 1200 x 815 mm Table height above floor: 800 mm Ram size: 1100 x 700 mm Speed downward: from 48 mm/s Gtsdpovzxphefx Adtst Speed upward: 330 mm/s Working speed: 19 mm/s Oil capacity: 1600 l Drive power: 82.0 kW Weight: 23.0 t Space requirement approx.: 2.4 x 2.8 x 4.0 m (LxWxH) Approved for manual loading according to CE standard with electro-hydraulic drive, pressure/time and stroke-dependent control, photoelectric safety guard at the front (Sick), two-hand operation

Kondisi: bekas, Tahun pembuatan: 1988, Pressing force 400 t Upright distance 1,100 mm Stroke 250 mm Stroke rate 25 – 75 /min Distance table/ram, max. stroke up, adj. up 900 mm Table area 1,100 x 965 mm Ejector force in table 30 t Ejector stroke in table 80 mm Ejector force in ram 3 t Gjdpfxjvuukne Adtott Ejector stroke in ram 60 / 70 mm Ram area 980 x 800 mm Lateral frame passage 800 mm Ram adjustment 20 mm Drive power 80.0 + 5.5 kW Weight 47.0 t Space requirement (W x D x H) 3.5 x 3.3 x 6.0 m Control cabinet weight 1.4 t Control cabinet space requirement (W x D x H) 4.9 x 0.5 x 2.6 m Multi-stage cold forging press with toggle drive featuring steplessly adjustable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the ram, motorised ram adjustment, pneumatic compensating cylinder in the press frame, cam-controlled ejector in the table (30 t / 80 mm), pneumatic ejector in the ram (3 t, 60 mm), motorised central lubrication Can be offered either without commissioning or alternatively with new Siemens S7-1500 F control system.

Kondisi: bekas, Tahun pembuatan: 1996, Pressure 250 t Frame gap 2100 mm Stroke 300 mm Distance table/ram, stroke at top 850 mm Table surface 2000 x 1300 mm Gtedpfx Aovuuidsdtjt Table height above floor 900 mm Lateral frame passage 1300 mm Ram surface 2000 x 1300 mm Oil capacity 1300 l Drive power 60.0 kW Weight 39.5 t Space requirement (W x D x H) 3.4 x 3.4 x 4.6 m Approved for manual loading operations according to CE standards with oil-hydraulic drive, hydraulic cutting shock absorption, hydraulic ram locking no foundation pit required Available without commissioning or alternatively with new Siemens S7-1500 F control system

Kondisi: bekas, Tahun pembuatan: 1987, druck-300t-de Gtedpfx Adovuk Ivstot

Kondisi: bekas, Tahun pembuatan: 2006, Presskraft: 250 t Ständerweite: 3.000 mm Hub: 600 mm Abstand Tisch/Stößel (Hub oben): 900 mm Tischgröße: 2.500 x 1.300 mm Tischhöhe über Boden: 1.050 mm Seitlicher Ständerdurchgang: 1.350 mm Stößelfläche: 2.500 x 1.300 mm Senkgeschwindigkeit: ab 500 mm/s Hebegeschwindigkeit: 400 mm/s Arbeitsgeschwindigkeit: 36–64 mm/s Ölvolumen: 2.700 l Antriebsleistung: 137,0 kW Gjdpfxovuuhao Adtett Eigengewicht: 54,0 t Platzbedarf (BxTxH): 4,10 x 4,55 x 6,15 m Für Handbelegearbeiten gemäß CE-Norm zugelassen Ausstattung: ölhydraulischer Antrieb, hydraulische Schnittschlagdämpfung, hydraulische Stößelverriegelung Kein Fundament erforderlich Lieferung wahlweise im aktuellen Zustand (ohne Inbetriebnahme) oder mit neuer Siemens S7-1500 F Steuerung

Kondisi: bekas, Tahun pembuatan: 1978, 33390f12-25e2-482e-b337-7d0ebabd853e Godpfsvuk Ipex Adtjtt

Kondisi: bekas, Tahun pembuatan: 2011, Druck_620t_maschinen Gtjdjvuudhspfx Adtet

Kondisi: bekas, Tahun pembuatan: 1991, prueba1 Godpfxovut D Tj Adtett

Kondisi: bekas, Tahun pembuatan: 1995, Pressure: 100 t Stroke: 20 - 120 mm Strokes per minute: 40 - 240 /min Upright clearance: 1300 mm Installation height (stroke + ram adjustment at top): 670 mm Side frame opening: 400 mm Table surface: 1200 x 800 mm Table through opening: 900 x 200 mm Table height above floor level: 1150 mm Ram area: 1130 x 650 mm Ram adjustment: 80 mm Material width: 250 mm Material thickness: 0.3 - 3.0 mm Material cross-section: 750 mm² Feed length: 1 - 9999.9 mm Drive power: 22.0 kW Weight: 16.0 t Space requirement (W x D x H): 3.7 x 2.5 x 3.7 m Height above floor: 3.7 m Approved for automatic operation according to CE standard with infinitely variable drive (PIV gearbox), pneumatic clutch/brake combination (Ortlinghaus), electronic press force monitoring (dual-channel), automatic stroke adjustment, motorized ram adjustment, pneumatic ram weight compensation, motorized oil circulation lubrication Electronic roller feed, manufacturer: Kaiser, model: KWV 250 Gtodpfx Aswc U Nlodtjt

Kondisi: bekas, Tahun pembuatan: 1965, Pressure: 160 t Stroke: 15 - 170 mm Strokes per minute: 15 - 40 Upright width: 2050 / 1900 mm Gsdevuk S Ujpfx Adtstt Shut height (stroke + ram adjustment at top): 690 mm Side column opening: 800 mm Table surface: 1600 x 800 mm Table height above floor: 900 mm Ram surface: 1620 x 700 mm Ram adjustment: 140 mm Drive power: 15.0 kW Weight: 24.0 t Space requirements approx. 3.3 x 2.3 x 5.3 m (LxWxH) Total height above floor: 4.8 m Height below floor: 0.5 m Only approved for use with safety tooling or fixed guarding in compliance with German accident prevention regulations (UVV) With steplessly adjustable drive, pneumatic clutch, pneumatic ram weight compensation, motorized ram adjustment, two-hand and foot operation As is, ex site, WITHOUT commissioning

Kondisi: bekas, Tahun pembuatan: 1998, Druck 63 t Gtsdpfsvzxrvox Adtst

Kondisi: bekas, Tahun pembuatan: 1985, Press force 40 t Stroke 500 mm Throat depth 360 mm Installation height 1000 mm Table dimensions 630 x 500 mm Table height above floor 1060 / 720 mm Ram surface 450 x 360 mm Downward speed 60 mm/s Return speed 300 mm/s Drive power 7.5 kW Weight 2.75 t Space requirement approx. 1.0 x 1.8 x 3.05 m (L x W x H) Gtjdpfx Aevzxrpsdtjt Table pass-through opening 200 mm Permitted only with safety tooling or fixed guarding in accordance with German accident prevention regulations (UVV) With hydraulic oil drive, intermediate plate on table (height approx. 340 mm) Condition: as is, where is, NOT commissioned

Kondisi: bekas, Tahun pembuatan: 1978, Press force 100 t Stroke 150 mm Throat depth 345 mm Installation height 400 mm Table surface 1200 x 600 mm Table height above floor 850 mm Ram surface 560 x 500 mm Downward speed from 350 mm/s Godpsvzxp Uofx Adtott Upward speed 350 mm/s Working speed 25 mm/s Oil capacity 560 l Drive power 22.0 kW Weight 8.3 t Space requirement approx. 2.1 x 1.7 x 2.8 m (LxWxH) Approved for manual loading operations in accordance with German accident prevention regulations (UVV) Fitted with hydraulic oil drive, light barrier (Sick), mechanical stroke limitation with hydraulic damping, two-hand and foot control

Kondisi: bekas, Tahun pembuatan: 1993, de2hu-20240620-01 Gedsvuk Rdopfx Adtjtt

Kondisi: bekas, Tekanan nominal 100 t Stroke 320 mm Jumlah stroke 35 /menit Jarak antar tiang 360 / 250 mm Jarak meja/dorong, stroke maksimum atas, penyetelan atas 500 mm Luas meja 320 x 450 mm Tinggi meja dari lantai 660 mm Luas pelat penekan 250 x 280 mm Diameter spindel 125 mm Daya penggerak 3,0 kW Gtedpfx Adovuk N Tstot Berat 4,5 t Kebutuhan ruang (PxLxT) 2,0 x 1,6 x 3,1 m Hanya diizinkan untuk penempaan panas Press spindel friksi berkecepatan tinggi dengan motor, penggerak friksi dijual sesuai kondisi, TANPA commissioning

Kondisi: bekas, 5t-presse-daten-de Gtjdpfx Adovuuk Uetot