Beli Pengelasan Sel bekas (26.629)

Kondisi: sangat baik (bekas), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without thermal load): 10...85°C Temperature deviation over time during temperature operation: ≤ ± 0.5 K/min Temperature deviation over time during climate operation: ± 1.0... ± 1.5 K/min Change rates: Heating: average 2.0 K/min Cooling: average 2.0 K/min The IEC 1646 standard can be tested, for solar modules up to a max. weight of 160kg and with non-linear ramps (setpoint steps). Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95% r.h. Humidity deviation over time: ≤ ± 3.0...±5.0 % r.h. Dew point range: 8...80.9°C Test chamber Test chamber volume: 7.0 m³ Dimensions Test chamber internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Hinged door DIN right, heated, Width 900 mm x Height 2100 mm Kedpfxsklv H Ij Aaysdw Viewing window, heated with blackout shutter and lockable, Width 500 mm x Height 600 mm Feed-through opening: 2x front right, ∅ 75 mm Radiation unit test chamber Cut-out: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area with SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system Bitzer compressor, semi-hermetic, 2-stage, air-cooled Condenser: split condenser (outdoor installation, winter control) Refrigerants: R507 / R23 Temperature control system Cooling brine medium Tyfocor / water Mixing ratio: 50/50% Brine density: 1.072 kg/dm³ Filling volume: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply test chamber Electrical connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power requirement: approx. 32.0 kW Circuit breaker: 3x63, Char C (A) Power supply SolarConstant Electrical connection: 400V, 3/N/PE, AC, 50Hz Connection type Max. simultaneous power requirement: approx. 30.0 kW Circuit breaker: 3x63, Char C (A) External dimensions of the test chamber, complete with: machine room/control cabinet and control cabinet for SolarConstant 2500 Machine room external dimensions: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber, total: approx. 2700 kg Condenser weight, empty: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) Further questions can be answered by phone.

Kondisi: bekas, Tahun pembuatan: 2003, luas filter: 143 m², kapasitas hisap: 6.000 m³/jam, Penghisap debu, ekstraktor asap pengelasan, filter patron pembersih mandiri, pneumatik, vakum untuk plasma, laser, sandblasting, soda blasting, peening dan segala jenis debu kering. Filter dibersihkan secara pneumatik dengan impuls udara bertekanan saat beroperasi, sehingga perangkat mempertahankan efisiensi tinggi. Kipas terletak di sisi bersih, sehingga risiko ledakan diminimalkan. Merek: Donaldson Torit DCE Model: DF+6-Cyclo Tahun produksi: 2003 Filter patron: 6 unit Luas filtrasi: 143 m² Daya kipas: 7,5 kW Kapasitas: 6000 m³/h Kjdpfow I Av Njx Aayjdw Diameter inlet: 300mm/250mm Kami juga menyediakan filter patron baru sesuai pesanan yang disesuaikan dengan aplikasi alat. Dimensi: tinggi – 3,05 m lebar – 1,85 m x 2,35 m No. gudang: 0989

Kondisi: baik (bekas), ultraschallsensor-ultrasonic-sensor-ultraschallgenerator-ultraso nic-generator-ultraschall-schwingeinheit-ultraschall-wandler-ultr aschall-kunststoffschweissgeraet-ultraschall-konverter-ultraschal l-sonotrode Kjdpfx Aoxwmgcsayedw

Kondisi: bekas, Tahun pembuatan: 1980, diameter luar: 38 mm, Diameter pipa (maks.): 38 mm, FOR SALE: Well-Maintained Complete Tube Welding Line PRODUCT (PROFILE, TUBE) - Outer diameter min.: 11 mm - Outer diameter max.: 38 mm - Wall thickness min.: 0.8 mm - Wall thickness max.: 2 mm PLANT SPECIFICATIONS - Welding process: HF inductive - Cutting process: flying saw - Maximum speed: 120 m/min ELECTRICAL DATA - Connected load: 440 kVA For sale is a fully serviced and excellently maintained tube welding line. This line has previously been used for manufacturing tubes for USM furniture, but it is designed for a wide range of tube diameters and is therefore flexible for various production requirements. Welding is performed with an EFD Induction HF inductive unit, year of manufacture 2018, ensuring a modern and efficient welding process. Total line length: approx. 100 m Ksdexm Ru Nspfx Aaysdw Operation: by 7 operators Condition: good, ready for operation Scope of supply: complete package An ideal opportunity for companies looking for a reliable and high-performance tube welding line.

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), de20240618_auto_schweißstation2025 Ksdpfxjxyk Szj Aayjdw

Kondisi: baik (bekas), Welding positioner Gieseking, 600 kg load capacity good condition Infinitely variable speed control approx. 0.01 to 1.5 rpm with foot remote control Diameter 0.8 meters height horizontal 0.95 meters height tilted to center of plate 0.8 meters Kdedpolamrwjfx Aayew Length 1.2 meters Width 1.1 meters

Kondisi: baik (bekas), TIRA Type: Walk-in Climate Simulation Chamber TTZ 4008 S(m) Technical Data: Temperature range: -40...+120 °C Kdedpfx Aeuvil Ssaysw Temperature tolerance: +/- 1.0°C Rate of temperature change: 1 K/min Humidity range: 10...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Dimensions: Test chamber volume: 8 m³ External dimensions (W x D x H): approx. 2410 mm x 3920 mm x 2530 mm Test chamber (W x D x H): approx. 2002 mm x 2148 mm x 2005 mm Door opening (W x H): approx. 2002 mm x 2005 mm Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data, specifications are non-binding!) We are happy to answer any further questions by phone.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, jam operasional: 12.900 h, Complete, overhauled welding robot system including: Robot RT 330 in suspended position on a swing jib (arm length 1500 mm), K 5 controller, gas nozzle sensor, arc seam tracking (option), mechanical cleaning, pressure intensifier, Fronius TPS 4000 welding equipment (400 A, pulse machine), wire feed, torch, hose package, 1 light barrier, external start/stop box, 1 index table with H-frame and 2 rotary devices RP/150A (load capacity 300 kg), faceplate distance 2200 mm, rotary radius 600 mm. Kodocrtlijpfx Aaysdw 6 months warranty on parts.

Kondisi: baik (bekas), de2en-tech-dukane-ultraschall Ksdsxwmbyopfx Aaysdw

Kondisi: baru, Tahun pembuatan: 2025, Perlengkapan: dokumentasi / manual, Laser welding unit with 3 kW laser power, laser components by Siemens – the welding machine comes with genuine CE certification, including a German manual, risk assessment, and all required documentation to legally operate a laser welding system in Germany. The wire feeder case, also with genuine CE certification, is included in the delivery package. On-site operator training can be provided at our facility. Ksden Sl D Rjpfx Aayodw

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), 7e79d0d6 Kedpfx Aajxyk Sueyedw

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 900 kg, Perlengkapan: kendali jauh kaki, Protec KT, beban maksimum 900 kg Kapasitas horisontal: 900 kg Kapasitas saat dimiringkan: 450 kg Diameter piring penjepit: 650 mm Diameter lubang: 110 mm Kdedpfxswak Swo Aayew Sudut kemiringan: 90° Kecepatan: 0,05 hingga 0,5 rpm (opsional, tambah €350: kecepatan 0,05 hingga 1,1 rpm) Kemiringan dapat diatur secara kontinu Dilengkapi remote kontrol tangan dengan tampilan kecepatan digital dan remote kaki

Kondisi: baik (bekas), RS Simulators Type: Walk-in Climate Simulation Chamber KKC 22/45 Technical Specifications: Ksdpfx Aaeuviydoyjdw Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95 % r.h. Humidity tolerance: +/- 5.0 % r.h. Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are subject to change!) If you have further questions, we will be happy to answer them by phone.

Kondisi: baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, tinggi total: 1.200 mm, lebar total: 790 mm, panjang total: 1.200 mm, tegangan masuk: 380 V, panjang kabel grounding: 3.000 mm, berat keseluruhan: 205 kg, masa garansi: 12 bulan, jenis pendinginan: air, panjang paket selang: 5.000 mm, arus masuk: 16 A, daya laser: 2.000 W, panjang gelombang laser: 1.080 nm, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, Handheld Laser Welding Machine AIRTECH 2kW – Top Technology for Efficient Sheet Metal Welding Demonstration Unit – Excellent Condition Discover the smart and high-performance solution for precise laser welding: the Airtech handheld laser welding system with 2,000 watts of power! Perfectly suited for demanding sheet metal processing – efficient, safe, and versatile in application. Highlights and Features: - Power: 2,000 watts for top welding quality and speed - Laser wavelength: 1080 nm, continuous operation mode with modulation frequency up to 20 kHz - Handheld laser welding head – optimally positioned for comfortable operation - Robust housing, intelligent internal structure for maximum service life - Touchscreen display for easy operation - Automatic multifunctional wire feeder available - Safety features: three-color alarm, safety interlocks, protective mechanism against incorrect operation - Cooling via separate water circuit with 13-liter tank capacity - CE-certified components according to European standards Your Advantages - Safe operation thanks to comprehensive protection mechanisms and alarm systems - Flexible use, including automatic wire feed and integration with robots Kodpfx Ajn Sl Dboayjdw - Low operating costs and easy maintenance due to well-designed technology and durable components For further information or a consultation, the Airtech team is happy to assist you!

Kondisi: baik (bekas), RS simulators Type: Walk-in Climate Simulation Chamber KKC 22/45L Technical Specifications: Kodpsuvi Nfsfx Aayodw Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% rH Humidity tolerance: +/- 5.0% rH Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Year of manufacture: 2009 Technical data for solar simulation: Control module: Mitronic STB1-8 Number of lamps: 8 Ballast: Mitronic CP2k5 – 2ZS Ignition unit: Hönle Light source: OSRAM Powerstar HQI 2000W W/D/S Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in the technical data; all information is without guarantee!) Please feel free to contact us by phone for further questions.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), tegangan masuk: 230 V, arus masuk: 16 A, Perlengkapan: Pelat tipe tersedia, Migatronic TIG DC HP Excellent DC TIG welding machine with optimal work settings. Kdjdpfx Aovbyazsaysw Designed for complex welding tasks in field operations. The ideal service and assembly unit.

Kondisi: sangat baik (bekas), Here we offer you an Omron SCARA industrial robot. Omron SCARA industrial robot with PB programming box R6Y XGL400 XG series SCARA robot for industrial applications: • Enhanced reliability (no belts in the XG series, no moving electronic parts) • High precision and speed • Minimal maintenance • Easy operation • High rigidity • Very compact design SCARA, reach: 400 mm, vertical stroke: 150 mm, max. payload: 5 kg Maximum payload range: 1 to 20 kg Kdedpfeh H D Rtex Aayew Reach: 120 to 1,000 mm IP40 Technical specifications: Reach X-axis Y-axis Z-axis R-axis 400 mm Maximum payload X-axis Y-axis Z-axis R-axis 5 kg Repeatability XYZ: +/–0.01 mm R: +/–0.004 Axis specifications: Arm length X-axis 250 mm Y-axis 150 mm Z-axis 150 mm R-axis ---- mm Rotation angle X-axis +/–140º Y-axis +/–144º Z-axis ----º R-axis +/–360º Type: R6Y XGL400150 Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) Any further questions can be answered by telephone.

Kondisi: sangat baik (bekas), Here we offer you a Bielomatik laser welding system. Kdedpfx Aajqay Uveyjw Bielomatik Laser Welding System Machine Description: The laser unit with integrated cooling for the laser is located in the lower left section of the machine frame. The tools are mounted on a 2-station rotary table that rotates 180 degrees with each cycle. The working area with the welding station, tooling (on the rotary table), and product clamping device is located in the central part of the machine frame. The control cabinet is installed at the rear. The welding station is secured towards the loading/unloading area by a laser-proof enclosure. The welding laser (laser source) is shut off when a maintenance door is opened. Loading and removal of weldments are performed manually; the welding process runs fully automatic. Laser type: YLR-300-AC-Y11/IPG The cell was used for laser welding various plastic components (front frames) with part sizes approximately 460 x 280 mm. Basic Data Equipment included: - 1 complete machine frame with housing, base, and safety devices, painted - Adjustable machine feet, designed for forklift transport - 3 manual maintenance doors in the laser-protected processing area, each safeguarded with a safety interlock switch - 4 manual maintenance doors below the machine table - Control cabinet firmly mounted at the rear of the machine Laser system make: IPG - 1 fiber laser 300W cw at the fiber end, 1070nm, fully air-cooled - 1 power supply unit for laser module, target beam laser, and fiber optic - 1 Vario-scan for 3D welding contours - 1 scanner - 20 mm aperture - Optical system: F-theta lens, focal length determines working area and distance - 2x base tool with tool coding via transponder - Hold-down/clamping system for mounting a mask with absolute position measurement system - with pneumatic clamping system for controlled pressure application on each weldment - Pneumatic air shower for lens protection Microbox PC427B with RTX (Siemens) - Pre-installed Siemens S7 PLC software - Profibus, Profinet, Ethernet, RS232 interface - 15” touch panel for operation and parameter input - Machine lighting - Connection flange for onsite extraction Machine data: Dimensions: - Machine (W x D x H): approx. 2330 x 2350 x 2500 mm Control cabinet: - Fixed at the machine frame - Required floor space (W x D): 5400 x 5400 mm Technical Data: Power supply: - Number of phases/nominated voltage: 3x400V 50Hz - Connected load: 5 kVA - Main fuse: 16A Exhaust: - Nominal diameter: ∅160 - Air flow: 500-1000 m³/h - Weight: approx. 2000 kg Type: K3633/023 Condition: used (Specifications subject to change and errors excepted!) Should you have further questions, we would be pleased to answer them for you by phone.

Kondisi: sangat baik (bekas), Votan Type: Jenoptik Votan W4 Votan Jenoptik modular laser welding system Votan Jenoptik laser machine Votan W modular laser welding system Laser welding allows you to join plastic parts with precision, energy efficiency, and speed. This process creates strong and durable welds that are free from any visible markings on the finished side. As such, plastic welding using laser technology also meets the highest aesthetic requirements. Nominal voltage/frequency: 3x 400 V / N / PE / 50 Hz Control voltage: 24 V DC Maximum current: 20 A Main fuse: 25 A Condition: used Kdjdpfx Ashr Dlijayew Scope of delivery: (See picture) (Subject to technical modifications and errors. All data provided without guarantee!) For any further questions, please feel free to contact us by phone.

Kondisi: hampir baru (bekas), Scanlab PowerScanII 50i Aperture: 50 mm Encoder: Galvanometer scanner with analog position detector Optical wavelength ranges (standard): 9400 nm, 10600 nm Max. laser power: 2500 W @ 9400 nm, 10600 nm Typical deflection angle: ±0.35 rad (optical) Dynamics Number of installed tunings: 1 Typical tuning: Fast-vector tuning Tracking delay: < 0.45 ms Positioning speed (f = 160 mm): 20 rad/s Step response (100% full scale): - 1% full scale: 1.0 ms - 10% full scale: 4.5 ms Accuracy Repeatability (RMS): < 4 µrad Position resolution (max.):* 18 bit for XY, 16 bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hour drift (after 30 min.): - Offset: < 50 µrad - Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller board Control interface (alternatives): digital SL2-100 Advanced diagnostic functions: yes (iDRIVE) Supply voltage: (48±2)V DC, max. 10 A each (20 A peak current) Mechanics Scan axes: 3-axis system with integrated varioSCAN Enclosure versions: Scan head Connector positions: opposite beam exit Weight without objective (standard housing): 35 kg Ksdpfoxp Iw Hox Aaysdw Dimensions (L x W x H) (standard housing): (433 x 268 x 266) mm³ (with varioSCAN) Beam offset: 72.72 mm Other features Water cooling: yes Air cooling: yes Other specifications Operating temperature: 25 °C ± 10 °C Deflection angle deviation: < 5 mrad Zero position deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Subject to modifications and errors in technical data. Information is provided without guarantee!) Shipping & pickup: Secure shipping on pallet (by arrangement) or local pickup possible. If you have further questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), en_TIRA Type: TCZ 4022 S -2K Description: Climate Simulation Chamber, Air-Cooled System Configuration: The system consists of the following main components: - Walk-in, insulated chamber - Air handling room - Humidification unit - Machine room - Control cabinet Technical Data: Performance Range for Temperature Testing: - Temperature range: -40...+140°C - Temperature consistency, supply air (temporal): ≤ ±0.5°C (without thermal test chamber load, according to DIN 50011 T13 / EN 60068) - Temperature consistency, supply air (spatial): ≤ ±1.0°C (without thermal test chamber load, according to DIN 50011 / EN 60068) - Heating rate (to DIN 50011): approx. 2.0 K/min (without thermal test chamber load, to DIN 50011 / EN 60068, or test specimen in the range -30°C...+85°C) - Cooling rate (to DIN 50011): approx. 2.0 K/min (without thermal test chamber load, to DIN 50011 / EN 60068, or test specimen in the range -30°C...+85°C) Performance Range for Climate Testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% r.h. (without thermal test chamber load) - Dew point temperature range: +5...+89°C (without thermal test chamber load) - Humidity consistency (in supply air, temporal): ≤ ±2.5% r.h. (measured in supply air) Performance Range for Climate Testing with Heat Compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% r.h. (without thermal test chamber load, with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal test chamber load) Dimensions: - Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm - External dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm - Clear door opening of test chamber door (W x H): 2260 x 2260 mm - Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm - Control cabinet (W x D x H): 800 x 500 x 2000 mm Design: Airflow: - Supply air: perforated plate on rear wall, ceiling area - Exhaust air: perforated plate on rear wall, floor area Temperature Control: - Direct cooling by evaporating refrigerant in a finned heat exchanger - Heating with electric resistance heaters Dehumidification: - Direct dehumidification by evaporating refrigerant in a heat exchanger Interior cladding: stainless steel External cladding: galvanized, plastic-coated steel sheet Floor design: stainless steel, floor load 15,000 N/m², wheel load (contact area ≥4 cm²) 1,500 N/wheel Door: double-leaf door, stainless steel, painted exterior with observation window (W x H) 1000 x 1000 mm Test chamber lighting: 4 spotlights at 500 W each Insulation: double-layer, 80 mm PUR foam, 120 mm mineral wool Refrigeration unit (1 piece): Bitzer 6G-30.2Y Refrigerant: R449A Refrigeration oil: SEZ 32 Steam humidifier (1 piece): EDB 40 Colors: - Chamber RAL 9010, white - Door RAL 9010, white Ksdovx S Hhopfx Aayodw - Machine unit RAL 7032, pebble grey - Control cabinet RAL 7032, pebble grey Weights: - Total system approx. 4,900 kg - Machine module KB 127 approx. 750 kg - Control cabinet approx. 120 kg - Humidification unit approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10% 3/PE N 50 Hz - Rated power: 95 kW - Rated current: 150 A

Kondisi: baik (bekas), TIRA Type: Walk-in Climate Simulation Chamber TCZ 4020 S-2k Technical Data: Kdsdpouviumjfx Aaysw Temperature range: -40...+140 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 2 K/min Humidity range: 10...approx. 95 % r.h. Humidity tolerance: +/- 5.0 % r.h. Dimensions: Test chamber volume: 19 m³ External dimensions (W x D x H): approx. 2660 mm x 4960 mm x 3300 mm Test chamber (W x D x H): approx. 2270 mm x 3190 mm x 2756 mm Door opening (W x H): approx. 2270 mm x 2756 mm Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical specifications!) If you have any further questions, we would be happy to answer them by phone.

Kondisi: sangat baik (bekas), CTS Type: TW -60/9 Water-cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 means: lower temperature limit -60°C 9 means: 9 m³ test chamber volume Technical Design: Cooling Unit: Water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R23 / R404A Control System: 32-bit controller LCD control panel Kedpfxsvb Hanj Aayodw Digital display of set and actual values Numerical input of set values Plain-text error messages RS 232 interface Free switching channels for external test specimen actuation Technical Performance Data: Temperature Testing: Temperature range: -60°C to +100°C Temperature deviation: ±0.1 to 0.5 K over time Average temperature change rate measured with test item and heat radiation in supply air: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test specimen: 420 kg solar cell modules, 100% loaded Constant heat radiation: 3000 watts Technical data refer to ambient temperature of +25°C, nominal voltage 400V, without test item, heat radiation, or additional equipment. Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Internal chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Nominal power: 48.9 kW, nominal current: 74.9 A Protection class: IP 54 Cooling water connections: supply/return R1 ¼“, female thread Condensate outlet, unpressurized R1“ female thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data. All information is non-binding!) For further questions, we are happy to assist you by phone.

Kondisi: hampir baru (bekas), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics - Wavelength Ranges (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W (9400 nm, 10600 nm) Typical Deflection Angle: ±0.35 rad (optical) Dynamics - Number of Tunings Installed: 1 Typical Tuning: Fast-Vector Tuning Tracking Lag: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Scale): 1% Full Scale: 1.0 ms 10% Full Scale: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Maximum Positioning Resolution*: 18 bit for XY 16 bit for Z* Nonlinearity: < 2.1 mrad / 44° Kdedjxp Iybepfx Aayow 8-Hour Drift (after 30 min.): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Controller: Galvanometer scanner with digital control board Control Interface (alternatives): Digital SL2-100 Extended Diagnostic Options: Yes (iDRIVE) Supply Voltage: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm³ (with varioSCAN) Beam Offset: 72.72 mm Other Features Water Cooling: Yes Air Cooling: Yes Other Specifications Operating Temperature: 25°C ± 10°C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See image) (Specifications and technical data are subject to change or error!) Shipping & Collection: Secure shipping on pallet (by arrangement) or local pickup possible. For further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), CTS Type: TW-60/9 Water-Cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specification: Refrigeration Unit: Water-cooled, low-noise, semi-hermetic Infinitely variable output control via electronic monitoring and control system Environmentally friendly refrigerants R23 / R404A Control System: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text RS 232 interface Free switching channels for customer-specific test item control Technical Performance Data: Temperature Testing: Temperature range: -60°C to +100°C Temperature deviation: ± 0.1 to 0.5 K over time Temperature change rates measured at the air supply, with DUT (Device Under Test) and heat radiation: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar cell modules, 100% tracking Heat radiation: 3000 W continuously Technical data refer to ambient temperature of +25°C, nominal voltage 400 V, without test load, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 9 m³ External dimensions: Width approx. 4140 mm, Depth 2680 mm, Height 3000 mm Internal chamber dimensions: Width approx. 1600 mm, Depth 2400 mm, Height 2200 mm Kdjdpevb E Uqsfx Aayow Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Nominal power: 48.9 kW Nominal current: 74.9 A Protection rating: IP 54 Cooling water connections: supply/return R1 ¼", internal thread Condensate drain (non-pressurized): R1" internal thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see image) (Subject to alterations and errors in technical data; information is not binding!) For further questions, please feel free to contact us by phone.