Beli Pengelasan Sel bekas (6.747)

Kondisi: sangat baik (bekas), CTS CW‑60/5.5 – Climate Test Chamber, Water-Cooled The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber used for performing temperature and humidity tests on multiple test specimens simultaneously. Device Description: This climate test chamber enables you to evaluate the functionality or material properties of a test object under the influence of temperature and humidity. Optimal air distribution with a correspondingly high recirculation volume ensures efficient transfer onto the test items. The air conditioning compartment is located at the rear of the inner chamber. The system components are situated behind the unit in a separate frame, providing easy access. Controls are housed in a separate electrical cabinet. The operating panel is integrated into the cabinet door. For humidity removal from the test chamber, a self-regenerating compressed air dryer is installed. Fresh air can be supplied to the chamber via a blower system. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temporal temperature deviation: ±0.5 to 1 K - Rate of temperature change (linear, with test specimen and radiant heat, measured in supply air): * Heating: 2 K/min from -40 °C to +85 °C * Cooling: 2 K/min from +85 °C to -40 °C Climate Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity * Dew point range: +5 °C to +89 °C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±1 - ±3% r.h. All technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimens, without heat irradiation, and without additional equipment. Dimensions: Internal Chamber/Test Area: - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm; Width: 1,600 mm; Depth: 1,550 mm External Dimensions: - Height: 2,800 mm; Width: 2,250 mm; Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power consumption: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Features: Refrigeration Unit: - Water-cooled, low noise, semi-hermetic - Infinitely variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R 23 / R 404 A Notes: - Inspection possible by arrangement (46325 Borken) - Shipping via freight forwarder available – costs & arrangements upon request - Scope of delivery: (see photo) Codpfx Aaex Eabpsdjra (Specifications and technical details subject to change and errors reserved.) We are happy to answer any further questions via telephone.

Kondisi: sangat baik (bekas), CTS CW-60/5.5 – Climatic Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for performing temperature and humidity tests on multiple test specimens simultaneously. Device Description The climatic test chamber allows you to test the function or material properties of a specimen under the influence of temperature and humidity. Efficient air circulation with a high recirculation volume ensures effective transmission to the specimen. The air handling unit is located at the rear of the interior. The system’s operating units are installed in a separate frame behind the device for easy accessibility. The control unit is housed in a separate electrical cabinet, with the control panel integrated into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The chamber can be purged with fresh air via a blower. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and heat load, measured at supply air): * Heating: 2 K/min from -40 °C to +85 °C Crsdpfx Aajx Eaxbedsa * Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10 % to 95 % relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3 % r.h. over time Technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without heat load, and without additional equipment. Dimensions: Internal dimensions (test chamber / usable space): - Volume: approx. 5,500 litres (5.5 m³) - Internal approx.: Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External approx.: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Design: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Stepless capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Notes: Inspection by appointment possible (46325 Borken) Shipping by freight forwarding possible – costs & arrangements on request Scope of delivery: (see picture) (Specifications and technical data subject to change and error!) We are happy to answer any further questions by phone.

Kondisi: sangat baik (bekas), CTS CW-60/5.5 – Climate Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for conducting simultaneous temperature and humidity tests on multiple test specimens. Device Description: This climatic test cell enables the assessment of functionality and material properties of test items under controlled temperature and humidity conditions. Efficient air circulation with a high recirculation volume ensures optimal transfer to the test goods. The air handling section is located at the rear of the interior chamber. The system aggregates are positioned behind the chamber in a separate frame for easy access. The control system is housed in a dedicated control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. The test area can also be purged with fresh air using a fan. Csdox D Abpepfx Aadera Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with test load and radiant heat, measured in supply air) - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3% r.h. over time Technical data refer to ambient temperature of +25 °C, rated voltage 400 V, without test samples, radiant heat, or additional equipment. Dimensions: - Internal (test chamber/usable space): - Volume: approx. 5,500 liters (5.5 m³) - Interior (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm - External: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Features: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable performance control via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: - Inspection by appointment possible (46325 Borken) - Shipping by freight forwarder available—costs & arrangements upon request - Scope of delivery: see image - (Specifications and information subject to change or error!) For further questions, we will be happy to assist you by phone.

Kondisi: sangat baik (bekas), en_TIRA Type: TCZ 4022 S -2K Description: Climate Simulation Chamber, Air-Cooled System Configuration: The system consists of the following main components: - Walk-in, insulated chamber - Air handling room - Humidification unit - Machine room - Control cabinet Technical Data: Performance Range for Temperature Testing: - Temperature range: -40...+140°C - Temperature consistency, supply air (temporal): ≤ ±0.5°C (without thermal test chamber load, according to DIN 50011 T13 / EN 60068) - Temperature consistency, supply air (spatial): ≤ ±1.0°C (without thermal test chamber load, according to DIN 50011 / EN 60068) - Heating rate (to DIN 50011): approx. 2.0 K/min (without thermal test chamber load, to DIN 50011 / EN 60068, or test specimen in the range -30°C...+85°C) - Cooling rate (to DIN 50011): approx. 2.0 K/min (without thermal test chamber load, to DIN 50011 / EN 60068, or test specimen in the range -30°C...+85°C) Performance Range for Climate Testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% r.h. (without thermal test chamber load) - Dew point temperature range: +5...+89°C (without thermal test chamber load) - Humidity consistency (in supply air, temporal): ≤ ±2.5% r.h. (measured in supply air) Performance Range for Climate Testing with Heat Compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% r.h. (without thermal test chamber load, with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal test chamber load) Dimensions: - Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm - External dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm - Clear door opening of test chamber door (W x H): 2260 x 2260 mm - Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm - Control cabinet (W x D x H): 800 x 500 x 2000 mm Design: Airflow: - Supply air: perforated plate on rear wall, ceiling area - Exhaust air: perforated plate on rear wall, floor area Temperature Control: - Direct cooling by evaporating refrigerant in a finned heat exchanger - Heating with electric resistance heaters Dehumidification: - Direct dehumidification by evaporating refrigerant in a heat exchanger Interior cladding: stainless steel External cladding: galvanized, plastic-coated steel sheet Floor design: stainless steel, floor load 15,000 N/m², wheel load (contact area ≥4 cm²) 1,500 N/wheel Door: double-leaf door, stainless steel, painted exterior with observation window (W x H) 1000 x 1000 mm Test chamber lighting: 4 spotlights at 500 W each Insulation: double-layer, 80 mm PUR foam, 120 mm mineral wool Refrigeration unit (1 piece): Bitzer 6G-30.2Y Refrigerant: R449A Refrigeration oil: SEZ 32 Steam humidifier (1 piece): EDB 40 Colors: - Chamber RAL 9010, white - Door RAL 9010, white - Machine unit RAL 7032, pebble grey - Control cabinet RAL 7032, pebble grey Weights: - Total system approx. 4,900 kg - Machine module KB 127 approx. 750 kg - Control cabinet approx. 120 kg - Humidification unit approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10% 3/PE N 50 Hz - Rated power: 95 kW Crjdevx S Hhspfx Aadja - Rated current: 150 A

Kondisi: baik (bekas), Weiss Type: Walk-in Climate Simulation Chamber WK 50 / 40-120 Technical Data - Climatic Chamber: Temperature range: -40 to +120 °C Cedpfx Aajuvi R Asdjra Temperature tolerance: +/- 0.5°C Temperature change rate: 1 K/min Humidity range: 15 to approx. 95 % RH Humidity tolerance: +/- 5.0 % RH Dimensions: Test chamber volume: 50 m³ External dimensions (W x D x H): approx. 4800 mm x 6100 mm x 2640 mm Test chamber (W x D x H): approx. 4500 mm x 5000 mm x 2200 mm Door opening (W x H): approx. 3000 mm x 2200 mm Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in the technical data and specifications!) For further questions, we are happy to assist you by phone.

Kondisi: baik (bekas), RS simulators Type: Walk-in Climate Simulation Chamber KKC 22/45L Technical Specifications: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% rH Humidity tolerance: +/- 5.0% rH Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Year of manufacture: 2009 Technical data for solar simulation: Control module: Mitronic STB1-8 Number of lamps: 8 Ballast: Mitronic CP2k5 – 2ZS Csdpfx Aaouvi Nfodera Ignition unit: Hönle Light source: OSRAM Powerstar HQI 2000W W/D/S Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in the technical data; all information is without guarantee!) Please feel free to contact us by phone for further questions.

Kondisi: baik (bekas), RS Simulators Type: Walk-in Climate Simulation Chamber KKC 22/45 Technical Specifications: Temperature range: -40...+120 °C Crodpfx Aajuviydsdoa Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95 % r.h. Humidity tolerance: +/- 5.0 % r.h. Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are subject to change!) If you have further questions, we will be happy to answer them by phone.

Kondisi: sangat baik (bekas), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Credpfx Asklv H Ijadsa Temperature Temperature range: -40...90°C Climatic range (without thermal load): 10...85°C Temperature deviation over time during temperature operation: ≤ ± 0.5 K/min Temperature deviation over time during climate operation: ± 1.0... ± 1.5 K/min Change rates: Heating: average 2.0 K/min Cooling: average 2.0 K/min The IEC 1646 standard can be tested, for solar modules up to a max. weight of 160kg and with non-linear ramps (setpoint steps). Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95% r.h. Humidity deviation over time: ≤ ± 3.0...±5.0 % r.h. Dew point range: 8...80.9°C Test chamber Test chamber volume: 7.0 m³ Dimensions Test chamber internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Hinged door DIN right, heated, Width 900 mm x Height 2100 mm Viewing window, heated with blackout shutter and lockable, Width 500 mm x Height 600 mm Feed-through opening: 2x front right, ∅ 75 mm Radiation unit test chamber Cut-out: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area with SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system Bitzer compressor, semi-hermetic, 2-stage, air-cooled Condenser: split condenser (outdoor installation, winter control) Refrigerants: R507 / R23 Temperature control system Cooling brine medium Tyfocor / water Mixing ratio: 50/50% Brine density: 1.072 kg/dm³ Filling volume: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply test chamber Electrical connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power requirement: approx. 32.0 kW Circuit breaker: 3x63, Char C (A) Power supply SolarConstant Electrical connection: 400V, 3/N/PE, AC, 50Hz Connection type Max. simultaneous power requirement: approx. 30.0 kW Circuit breaker: 3x63, Char C (A) External dimensions of the test chamber, complete with: machine room/control cabinet and control cabinet for SolarConstant 2500 Machine room external dimensions: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber, total: approx. 2700 kg Condenser weight, empty: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) Further questions can be answered by phone.

Kondisi: baik (bekas), TIRA Model: Walk-in Climate Simulation Chamber TCZ 4012 S(m) Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.0°C Rate of temperature change: 1 K/min Humidity range: 10...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Crsdpfxsuvipwe Aadsa Dimensions: Test chamber volume: 13 m³ External dimensions (W x D x H): approx. 2260 mm x 3850 mm x 2780 mm Test chamber (W x D x H): approx. 2254 mm x 2645 mm x 2251 mm Door opening (W x H): approx. 2251 mm x 2254 mm Condition: Used Scope of delivery: (See picture) (Subject to technical modifications and errors. All information without guarantee!) For further questions, feel free to contact us by phone.

Kondisi: baik (bekas), TIRA Type: Walk-in Climate Simulation Chamber TCZ 4020 S-2k Technical Data: Temperature range: -40...+140 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 2 K/min Humidity range: 10...approx. 95 % r.h. Humidity tolerance: +/- 5.0 % r.h. Dimensions: Test chamber volume: 19 m³ External dimensions (W x D x H): approx. 2660 mm x 4960 mm x 3300 mm Codpfxjuviums Aadora Test chamber (W x D x H): approx. 2270 mm x 3190 mm x 2756 mm Door opening (W x H): approx. 2270 mm x 2756 mm Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical specifications!) If you have any further questions, we would be happy to answer them by phone.

Kondisi: sangat baik (bekas), CTS Type: TW-60/9 Water-Cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specification: Refrigeration Unit: Water-cooled, low-noise, semi-hermetic Infinitely variable output control via electronic monitoring and control system Environmentally friendly refrigerants R23 / R404A Control System: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text RS 232 interface Free switching channels for customer-specific test item control Technical Performance Data: Temperature Testing: Temperature range: -60°C to +100°C Temperature deviation: ± 0.1 to 0.5 K over time Temperature change rates measured at the air supply, with DUT (Device Under Test) and heat radiation: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar cell modules, 100% tracking Heat radiation: 3000 W continuously Technical data refer to ambient temperature of +25°C, nominal voltage 400 V, without test load, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 9 m³ External dimensions: Width approx. 4140 mm, Depth 2680 mm, Height 3000 mm Internal chamber dimensions: Width approx. 1600 mm, Depth 2400 mm, Height 2200 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Nominal power: 48.9 kW Crjdpfxevb Hans Aadea Nominal current: 74.9 A Protection rating: IP 54 Cooling water connections: supply/return R1 ¼", internal thread Condensate drain (non-pressurized): R1" internal thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see image) (Subject to alterations and errors in technical data; information is not binding!) For further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), CTS Type: TW-60/9 Water-Cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specification: Refrigeration Unit: Water-cooled, low-noise, semi-hermetic Infinitely variable output control via electronic monitoring and control system Crjdpfxovb E Uqs Aadja Environmentally friendly refrigerants R23 / R404A Control System: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text RS 232 interface Free switching channels for customer-specific test item control Technical Performance Data: Temperature Testing: Temperature range: -60°C to +100°C Temperature deviation: ± 0.1 to 0.5 K over time Temperature change rates measured at the air supply, with DUT (Device Under Test) and heat radiation: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar cell modules, 100% tracking Heat radiation: 3000 W continuously Technical data refer to ambient temperature of +25°C, nominal voltage 400 V, without test load, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 9 m³ External dimensions: Width approx. 4140 mm, Depth 2680 mm, Height 3000 mm Internal chamber dimensions: Width approx. 1600 mm, Depth 2400 mm, Height 2200 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Nominal power: 48.9 kW Nominal current: 74.9 A Protection rating: IP 54 Cooling water connections: supply/return R1 ¼", internal thread Condensate drain (non-pressurized): R1" internal thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see image) (Subject to alterations and errors in technical data; information is not binding!) For further questions, please feel free to contact us by phone.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, Data Umum Berat mesin: 1.720 kg Tinggi: 2.300 mm Dimensi Panjang mesin: 3.990 mm Penggerak Utama Jumlah sumbu: 6 Robot las 6-sumbu REHM COMPACT-ARC 200 VM ini diproduksi tahun 2015. Dilengkapi dengan sel robot pengelasan yang kokoh, beroperasi pada 3 × 400 V AC dengan frekuensi 50 Hz. Dapat menangani beban benda kerja maksimal 200 kg dan membutuhkan tekanan angin 6 bar. Dimensi alat adalah 3.990 × 2.020 × 2.300 mm, bobot 1.720 kg. Pertimbangkan peluang untuk membeli robot las REHM COMPACT-ARC 200 VM ini. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Pengelasan Credpfsx D Dizex Aadsa

Tahun pembuatan: 2022, Kondisi: baru, Manipulator with two height-adjustable arms and faceplate. Load capacity: 1,500 kg Lift: 800 mm Swivel range: 300° Faceplate diameter: 1,000 mm Cedpfx Aefnku Hoadsra Welding current: 600 A

Tahun pembuatan: 2022, Kondisi: baru, Height-adjustable L-manipulator Load capacity: 500 kg Lift: 640 mm, faceplate height min. 480 mm, max. 1,110 mm Swivel range: +/-185° Faceplate diameter: 800 mm Welding current: 400 A Faceplate torque: 900 Nm Swivel arm torque: 900 Nm Overall length: 2,495 mm Height: 1,855 mm Width: 900 mm The turntable is operated via a hand-held remote control offering the following functions: • Raise arm Csdpfx Aeh Td Thoadjra • Lower arm • Swivel arm right • Swivel arm left • Potentiometer for stepless faceplate speed adjustment A two-pedal foot switch is available for faceplate operation with the following functions: • Rotate faceplate right • Rotate faceplate left

Tahun pembuatan: 2022, Kondisi: baru, Height-adjustable rotary-tilt table Load capacity: 500 kg Lift: 1,015 mm, faceplate height min. 345 mm, max. tilt angle 120° Faceplate diameter: 800 mm Welding current: 400 A Crsdpfx Aash Tfbzjdoa Faceplate torque: 1,300 Nm Total length: 2,365 mm Height (housing): 1,030 mm The rotary-tilt table is controlled via push-buttons on the machine housing with the following functions: • Raise arm • Lower arm • Potentiometer for stepless SPEED adjustment of the faceplate A dual-pedal foot switch is available for controlling the faceplate, with the following functions: • Rotate faceplate RIGHT • Rotate faceplate LEFT

Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 03890317, Machine number: 03890317 // Condition and details, see images Credpfxot A A Aqe Aadoa

Kondisi: baru, kapasitas angkut: 2.000 kg, diameter meja putar: 1.300 mm, rentang pivot: 120 °, Capacity: 2,000 kg Maximum height at center of gravity: 250 mm Maximum eccentricity at center of gravity: 200 mm Table diameter: 1,300 mm Motor power: 1.1 + 1.5 kW Table tilting (motorized): Tilting speed 0.67 rpm Rotational speed: 0.12 – 1.2 rpm Manual operation: Via foot pedal (right rotation and left rotation) Credeuf Nm Hepfx Aadea Automatic operation: Via selector on control panel Tilting angle (degrees): 0-120 Frequency inverter: Danfoss Electrical components: Schneider

Kondisi: baru, kapasitas angkut: 5.000 kg, diameter meja putar: 1.500 mm, rentang pivot: 120 °, Capacity: 5,000 kg Maximum height, center of gravity: 300 mm Maximum center of gravity offset: 200 mm Table diameter: 1,500 mm Motor power: 2.2 + 3 kW Table tilting (Motorized): Tilting speed 0.14 rpm Csdpfx Aouf Nu Roadjra Rotation speed: 0.05 – 0.5 rpm Manual operation: By foot pedal (Right and left rotation) Automatic operation: Via selector on control panel Tilting angle (degrees): 0-120 Frequency inverter: Danfoss Electrical components: Schneider

Kondisi: baru, kapasitas angkut: 300 kg, diameter meja putar: 600 mm, Capacity: 300 kg Max. height, center of gravity: 200 mm Max. eccentricity, center of gravity: 150 mm Table diameter: 600 mm Motor power: 0.37 kW Table tilt: Manual, via handwheel Rotation speed: 0.1 – 1.0 rpm Manual operation: By foot pedal (right/left rotation) Automatic operation: By selector switch on control panel Tilt angle (degrees): 0–90 Cedpfx Asuf Nk Esadjra Frequency inverter: Danfoss Electrical components: Schneider

Kondisi: baru, kapasitas angkut: 100 kg, diameter meja putar: 400 mm, Capacity: 100kg Max. height, center of gravity: 150mm Max. eccentricity, center of gravity: 100mm Table diameter: 400mm Motor power: 0.2kW Table tilt: Manual, via handwheel Rotation speed: 0.4 – 4.0 rpm Manual operation: Via foot pedal (Clockwise and Counterclockwise rotation) Automatic operation: Via selector on control panel Tilt angle (degrees): 0-90 Cjdpeuf Niujfx Aadera Frequency inverter: Danfoss Electrical components: Schneider

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 2.000 kg, Manipulator Demmeler Robotix L 3-sumbu Rotasi 360°, kemiringan 360° (overhead), dengan penyesuaian ketinggian Kondisi sangat baik Tinggi minimum: 1050 mm Tinggi maksimum: 2200 mm Tinggi total: 3250 mm Cjdpfxjytgu Te Aadsra Kecepatan putar: 0,2 - 1,0 rpm Torsi: 24.000 Nm Kecepatan angkat: 1,5 m/menit Remote control manual

Kondisi: bekas, jarak tempuh: 190.000 km, daya: 205 kW (278,72 hp), pendaftaran pertama: 01/1996, jenis bahan bakar: bensin, inspeksi berikutnya (TÜV): 03/2028, tipe perpindahan gigi: otomatis,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, 2-station cell with ABB IRB 1400 welding robot (under power) Year of manufacture: 2001 Maximum reach: 1440 mm Maximum payload: 5 kg Welding source: KEMPPI 520 R Welding power: 520 A Codpfx Aaogb Dx Aodora Price: ~16,000 €~ -25% - 12,000 €

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Filter sel besar (ELBAZ0124L) dari ISI Industrieprodukte untuk filter kabut oli elektrostatis ISI / Elbaron Csdpeylk Arefx Aadjra 2 unit baru dan belum terpakai Misal untuk filtrasi pada instalasi dan perangkat teknik udara seperti AC, kompresor, dan instalasi pengecatan Mudah diganti / tahan suhu hingga maks. 80°C Cocok misalnya untuk filter elektrostatis ISI / Elbaron RH 2500 DV, RON4D1TR Harga per unit €990,-- netto ex lokasi, belum termasuk biaya pengemasan Seluruh data teknis tanpa jaminan, kesalahan pengetikan/keliru mungkin terjadi. Penjualan hanya ke negara anggota Uni Eropa.