Beli Perekat Mengikat bekas (1.272)

Kondisi: bekas, Tahun pembuatan: 2007, Perfect Binder Line Wohlenberg City E-6000 (edition 6000) Year of manufacture: 2007 Comprising: Book Block Feeder Solema 6353 Gathering Machine Wohlenberg Sprinter E Description: Njdpfx Abox Dki Ujuswb - Manual feeding station - Number of gathering stations: 16 - Optical sheet type detection: WST - Opticontrol OSC 1-1 - Winjector vacuum system - Feed unit - Criss-cross delivery - Handover to the binder Perfect Binder Wohlenberg City E-6000 (edition 6000) Description: - TFT touchscreen - Number of clamps: 15 - Milling and notching station - Exclusive dust extraction, machine was connected to a central dust extraction system Front trimmer: VSS - Hotmelt spine gluing with integrated presmelter - Hotmelt side gluing unit with integrated presmelter - PUR spine gluing unit - Rotary cover feeder - Creasing station - 1st pressing station - 2nd pressing station - Book deposit device (to the left) Conveyor Section Description: - Conveyor system, length (approx.): 50 m - Emergency delivery station Three-Knife Trimmer Müller Martini Merit S Year of manufacture: 1997 Description: - Infeed from the right - Automatic magazine for in-line production - Total number of knife sets: 2 - Exchangeable cutting cassettes (standard set): 4-17 Book Stacker Rima RS-3310S Year of manufacture: 2007 - Delivery to the right Shrink Wrapping Machine BVM BMS 6030 W Year of manufacture: 2007 Description: - Shrink tunnel

Kondisi: bekas, Tahun pembuatan: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for edge heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical specifications: - Machine table with 13 support rollers for improved workpiece guidance - Edge feed, synchronized with conveyor belt feed Nwodpfowka S Iex Abujb - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Conveyor feed: - 0.25 kW - Approx. 1250 mm long - Approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber coating - Digital counter for height adjustment - Direct glue application to the workpiece: Drip-proof glue pot with bottom glue supply and quick heat-up time after machine standstill - Flush cutting unit: - For workpiece front and rear edges - Automatic sensing on the workpiece - Pneumatic cutting with knife for cuttable edges - Flush trimming unit: - With vertical scanning and horizontal guidance - Reproducible adjustment via digital counters - 2 powerful 0.4 kW high-frequency motors - Infinitely variable speed from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2mm/15° - Central extraction port Ø 100 mm - 2 chip extraction covers with hose Ø 60 mm - Automatic height adjustment of the top cutter with conveyor feed - Continuous workpiece support, approx. 1800 mm long - Extension workpiece support rail, approx. 300 mm extendable - Rotatable foil carousel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Power connection: 400V, 50 Hz, 3Ph + N - Total power: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without foil carousel): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: Short notice Location: Flörsheim

Tahun pembuatan: 2009, Kondisi: baik (bekas), Automatic gluing and strapping machine by Normpack – used - : Price ex location: now only €9,500 instead of €19,950 (net)!! Manufacturer: Normpack Model: X67-70-2175-NPS-504-L Year of manufacture: 2009 Weight: 490 kg F O L D I N G C A R T O N F O R M A T S: Length: min. 250 mm, max. 800 mm Width: min. 120 mm, max. 650 mm Nodpfx Aog Ncgrsbuswb Height: min. 120 mm, max. 600 mm Weight: min. 0.5 kg, max. 32 kg 400V, 1.7kW, 4.5A Condition: good Available: immediately Location: 79664 Wehr

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Edge banding machine SCM Model Olympic 500 HP 'T-ER2' Offer type: LEASE RETURN, Used machine Availability: immediate Location: in stock Condition: as new Year of manufacture: 2023 GENERAL INFORMATION: A complete and versatile edge banding machine for small and medium-sized companies, capable of processing a wide variety of materials to a high-quality standard within a compact footprint. The SCM Olympic 500 features electronic adjustment and enables processing of two radii, each with its own tool, for workpieces with a minimum width of 60 mm. HIGHLIGHTS: • Large touchscreen control panel with “Maestro active edge” HMI software • Maestro connect: future-ready for installation without gateway • Dual-radius processing, chamfer on all units with multi-edge tooling - Fine trimming and radius scraper unit, radius = 1 mm - Fine trimming and radius scraper unit, radius = 2 mm • Electronic positioning of the pressure beam OPTIONAL MACHINE EQUIPMENT: Workpiece spacing device at infeed KIT “SAV€NERGY” Internal lighting of the enclosure and gluing area “Nesting” tracing roller KIT Separation agent spraying unit “AAR” Spraying unit for edge finishing Nwodpfxsq A Tyzo Abuob Spraying unit for sensitive edges Jointing cutter unit “RT-V1” “EASY SIZE” device – electronic quick adjustment of jointing cutter unit Glue unit “VC-VM” SGP glue pot for EVA & PUR incl. quick-change device Ceramic lamp with infrared pre-heating for workpieces Electronic positioning of all pressure rollers End trimming unit “K-2 Radius” Bevel and radius milling unit “R-HP Multiedge 2R” Corner rounding unit “Round 2-A Multiedge 1R” KIT 'MULTIEDGE 3’ automatic straight/R/R position switching for “Round 2-A Multiedge 1R” unit Radius scraping unit “RAS-HP Multiedge 2R” Flat scraper unit “RC-N” Buffing unit “SP-V” MACHINE LANGUAGE: German TECHNICAL DATA: Edge thickness 0.4–6 mm Workpiece thickness 8–60 mm Min. workpiece width 60 mm Feed speed 12 m/min Machine length approx. 4950 mm SPECIAL PRICE FOR LEASE RETURN!!

Kondisi: sangat baik (bekas), Tahun pembuatan 2020, lebar bukaan 1400 mm, tinggi bukaan 1000 mm, dengan 2 meja kerja Nwsdpjwxw Ucefx Abujb

Kondisi: sangat baik (bekas), 4 units Year of manufacture: 2006/2004/2003/2002 Nwedpfxev Sq Rrs Abuob Strap width: 5 mm, 9 mm, or 12 mm. Strap tension: Infinitely adjustable, including gentle tension for delicate items. Maximum package size: 600 x 600 mm (width x height). Sealing system: Heat-seal welding. Table height: Approx. 820–925 mm. Minimum package height: Approx. 10 mm. Maximum package weight: Approx. 25 kg. Strap material: Polypropylene (PP). Power supply: 230 V.

Kondisi: sangat baik (bekas), Type: R0-M-P2 Frame size: approx. 300 x 400 mm Wear-resistant, positively guided band guiding system Band tension adjustable via potentiometer Hot wedge welding system Sturdy foot pedal for releasing the strap 4 rollers, 2 of which are lockable Straps: PP straps suitable for automatic machines Mains voltage: 230 V, 50/60 Hz Power: 240 V 0.5 kW / 50 Hz 2.4 A Year of manufacture: 2001/1998/1999 Quantity: 3 units Price per unit Njdpfx Absv Sq R Ejuewb

Kondisi: bekas, Tahun pembuatan: 2016, Industrial Automatic Edgebanding Machine SOLUTION XD MAIN FEATURES “E TOUCH” CONTROL WITH AUTOMATIC PROGRAMMING: ONE “TOUCH” IS ENOUGH TO OPERATE THE MACHINE Standard pressure unit with drive belt for optimum panel guidance Edgebanding of coil material, strip edges, and solid wood edges GENERAL FEATURES Single-sided edgebander in left-hand configuration for edgebanding coils and strips using all common hot-melt adhesives. The base frame consists of a robust welded steel frame with increased rigidity, providing optimal support for housing the processing units. The top pressure is made of thick-walled steel profile with a double trapezoidal drive belt, which is positioned automatically according to the panel thickness. Height adjustment is displayed both on the top pressure and on the operator’s console. Manual workpiece feed system with generously sized working line and enlarged support surface for easy introduction of large workpieces. Adjustable infeed fence with two positions and automatic selection for processing with or without pre-milling unit. Machining units mounted on the pressure beam and mechanically linked to guarantee automatic adjustment when changing panel thickness. Lower processing units are fixed to the machine base or longitudinal beam for precise reference to the panel. All high-frequency motors are equipped with frequency converters (inverters); each unit has its own inverter for optimal flexibility and improved production times. Protective hood for all units located after the gluing station, with polycarbonate windows providing a clear view of the processing units during operation. Interior lighting of the hood, equipped with sound-absorbing material to reduce noise emissions during operation. Spacer at the infeed fence allows correct panel loading. The spacing is automatically adjusted according to the selected feed speed. Swiveling control panel positioned at the infeed area, adjustable for ergonomic operation. Electrical system complies with current regulations. Electrical components are housed in a metal cabinet mounted to the machine frame with doors for convenient access during maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide plates made of rubberized nylon, for optimal guidance and high durability. The chain runs on two guides made of hardened and ground steel—one round, one flat—to ensure straight panel feed and to prevent lateral deviation. Automatic lubrication of the chain, with lubricant amount controlled by the system according to panels processed. Nedjxy Tm Ijpfx Abuewb External roller conveyor running the entire length of the machine, with an extendable opening system (up to 650 mm) for panels with maximum width of 1200 mm. E-TOUCH PC control system for quick and easy handling of main functions including: – Processing programs in Just-in-Time mode – Option to manage via parts lists – Option for management through ...

Kondisi: bekas, Tahun pembuatan: 2018, Edge banding machine AKV 3006 DK - F with jointing cutter unit, including DIA tools. Jointing thickness up to 40 mm, workpiece thickness up to 3 mm. Combination milling station, radius R 2.5 mm. Technical Description: - Application of hot-melt adhesive to the workpiece for edge materials up to 3 mm - Max. workpiece thickness: 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF end-trimming unit (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable cutter (combination design) and fine cutter adjustment from the operator side - Spaces available for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment for cross-cut saw Nodsxfh Tmjpfx Abujwb - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate view window from both rear and operator side - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg, depending on equipment - Dimensions (L x W x H): 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment, 1 pc. Toggle between radius – flush/chamfer for combination milling stations. Switching between chamfer or flush is done manually via the stop flap in the machine. Buffing station (polishing mop): 1 pc Corner rounding cutter: 1 pc, including combination tool and pneumatic setting for chamfer/radius. Maximum workpiece thickness 40 mm. Minimum workpiece length 300 mm. Radius R 2.0 mm. Radius scraper: 1 pc, including pneumatic lift device, radius R 2.0 mm. Flat scraper: 1 pc, with pneumatic control. Glue pot quick-change system, including second glue pot and downward glue outlet, 1 pc for quick color change. Grooving saw unit, horizontal into the edge, 1 pc, including pneumatic lift device and grooving tool. Separate extraction for jointing unit, 1 pc, directly at the jointing unit, vertically upward, d=80 mm for optimal extraction; strongly recommended from model AKV 3005 DK-F onwards. Ball bearing for corner rounding cutter 24.1 mm, 1 pc Ball bearing for corner rounding cutter 24.2 mm, 1 pc Interchangeable motor 0.37 kW for corner rounding cutter, 1 pc, with quick-change device incl. radius cutter R 1. Interchangeable spindles, 1 set = 2 pcs, 1 set Quick change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hr Storage location: Nattheim.

Kondisi: bekas, Tahun pembuatan: 2021, de-hu-001 Nwsdpfx Absxdxqteujb

Kondisi: bekas, Tahun pembuatan: 2007, Ikhtisar Pelabel palet ini diproduksi pada tahun 2007 oleh perusahaan Jerman Logopak. Produsen: Logopak Model: 920 PF Label perekat untuk palet. Ukuran label: A5. Njdpfx Asxbf Nqsbujwb

Kondisi: bekas, nomor mesin/kendaraan: 007848, Type of applied edge: thin edge, thick edge, solid wood Glue system: EVA, hot air Jointing cutter: yes Multi-function unit: yes Maximum feed speed: 20 m/min Nwjdpfx Abowkrqpsueb Maximum panel thickness: 60 mm Working units: 8 units

Kondisi: bekas, nomor mesin/kendaraan: 008161, Typ der angebrachten Kante: dünne Kante, starke Kante Klebesystem: EVA, PUR Fügefräsen: ja Nwodpfxsx A Tlcj Abujb Multifunktionsaggregat: ja Max. Vortriebsgeschwindigkeit: 20 m/min Maximale Plattendicke: 60 mm Arbeitsaggregate: 6 nr

Kondisi: bekas, nomor mesin/kendaraan: 007113, Jenis pinggiran yang diaplikasikan: pinggiran tipis, pinggiran tebal, kayu solid Sistem lem: EVA Milling sambungan: ya Agregat multifungsi: ya Kecepatan maju maks.: 22 m/menit Ketebalan panel maks.: 60 mm Unit kerja: 8 unit Nedpfx Asrl Ur Tsbuowb

Kondisi: bekas, Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 450 kg, jenis arus masuk: tiga fasa, jenis penyesuaian ketinggian: mekanis, tegangan masuk: 400 V, – Italian-made – Year of manufacture: 2016 – Pre-milling – Technical documentation (DTR), CE certificate TECHNICAL PARAMETERS: – Edge thickness: 0.5 – 3 mm – Solid wood edging: 0.5 – 5 mm – Workpiece height: 8 – 50 mm Nsdpfx Aewb Ha Tebuowb – Minimum edging length: 160 mm – Minimum panel width: 110 mm – Feed speed: 7 m/min – Pre-milling – Radius cutters – Edge trimming – Radius scraper – Straight scraper – Air blow-off on each unit – Working pressure: 8 bar – Working machine length: 2030 mm – Transport dimensions (L/W/H): 330 / 80 / 125 cm – Weight: 450 kg

Kondisi: bekas, nomor mesin/kendaraan: 008160, Jenis tepi yang terpasang: tepi tipis, tepi tebal Sistem perekat: EVA Penyambungan frais: ya Unit multifungsi: ya Kecepatan maju maks.: 14 m/menit Ketebalan panel maks.: 60 mm Unit kerja: 7 unit Njdpfxsxqm Iyo Abuowb

Kondisi: bekas, Tahun pembuatan: 2022, Ketebalan tepi: dari 0,4 hingga 5 mm Ketebalan benda kerja: dari 10 hingga 45 mm Kecepatan pengumpanan: 8 m/menit - Sistem Quick-Set - Unit joining dengan cutter DIA Nwsdpoxpn Ufsfx Abujb - Pengumpanan tepi otomatis - Unit gergaji linear dengan permesinan radius - Unit frais multifungsi - Rangka bawah

Kondisi: bekas, Lokasi gudang: Sonnefeld Nwedpeway Dcefx Abuob

Kondisi: bekas, Tahun pembuatan: 1994, Ketebalan pinggiran 0,3 - 20 mm Tinggi edging: maks. 66 mm Panjang edging: min. 200 mm Lebar benda kerja min. 60 mm Panjang benda kerja min. 140 mm Tebal benda kerja: min. 6 mm, maks. 60 mm Kecepatan makan 8 atau 16 m/menit - Pengeleman pinggiran dengan Ultra - Granupress - Pemotongan ujung dengan 2 gergaji, dapat diputar 0 - 15° - Milling, radius / rata - Penyalinan sudut - Scraper - Penggosokan pneumatik Lokasi: Nattheim Njdpfevvkdtex Abujwb

Kondisi: bekas, Tahun pembuatan: 1996, Ketebalan pinggiran: 0,4 - 12 mm Tepi gulungan: 3 x 45 mm atau 0,8 - 60 mm Lebar benda kerja minimum: 65 mm Panjang benda kerja minimum: 160 mm Ketebalan benda kerja: 10 - 55 mm Kecepatan maju: 13 m/menit Pramilling (penyambungan) Bak lem Quickmelt Unit pengelem Pemotongan Meratakan pinggiran Penyudutan pemotongan Perataan radius Penyalinan sudut Pisau penghalus rata Unit pemoles Dimensi mesin: 7450 x 1220 x 2400 mm Berat: 3000 kg Lokasi gudang: Nattheim Nsdpfx Abevvkd Teuswb

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation Nsdpfxjvvkfds Abuswb • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.

Kondisi: bekas, Tahun pembuatan: 2001, Laitteen reunalistan ja kappaleen mitta- ja varustetiedot, varastopaikalla Nattheim. Nwjdpfx Asvvkfqebueb

Kondisi: bekas, Tahun pembuatan: 2002, Panjang mesin: 6240 mm Berat: 2400 kg Daya terhubung: 14 kW Diameter hisap: 120 / 140 mm Lokasi penyimpanan: Nattheim Nsdpfx Abevvkfwjujwb

Kondisi: bekas, Tahun pembuatan: 2011, penyetelan frais pneumatik (lurus/jari-jari) Stasiun frais kombinasi R=2 Frais pembulat sudut R=2 hingga 40 mm Frais penyambung hingga 40 mm Pisau tarik permukaan Pisau tarik profil R=2 untuk benda kerja pendek Pengontrol SPS dengan layar sentuh Pro Face Nesting Semprotan pendingin/anti statik - airtronic Semprotan pelindung tepi Riepe termasuk bak cadangan Tebal benda kerja: 8 - 60 mm Penjepitan tepi mekanis Konektor ekstraksi: 140 mm Dimensi: Panjang dengan ekstensi: 4984 mm Kedalaman dengan meja rol: 1425 mm Tinggi maks.: 1618 mm Tinggi meja kerja: 888 mm Berat: 1400 kg Lokasi penyimpanan: Nattheim Nwjdpfxoxyiile Abusb

Kondisi: bekas, Tahun pembuatan: 2006, Pelapisan EVA dengan 2 rol tekan, stasiun pemotongan, pra-frezer dan frezer pengebulatan, pisau tarik permukaan, perangkat penggerak. Lokasi penyimpanan: Nattheim Nodpfx Abovvkg Ijuswb