Beli Rak Baja bekas (9.393)

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, single-sided, 6.30m height, 1.20m arms, 500kg per arm – New stock - : Price ex works including loading! 1 racking unit with 4 uprights: €4,115 (net)! Transport costs within Germany (excluding islands): €490 (net)! Iodpfsfivg Rox Apvetg You can also create longer or shorter racking units by omitting or purchasing additional uprights (or by adjusting the spacing between the uprights). The example with 4 uprights represents the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: - Single-sided racking uprights, approx. 6,300 mm high, hot-dip galvanized - Base and arm depth 1,200 mm with three height-adjustable arms per upright - Load capacity at 600 mm load center: 500 kg per arm / 4,000 kg per upright - With 4 uprights per arm level: 4 x 500 kg = 2,000 kg - Profiles: Uprights: IPE220, Arms: IPE 80 - With longitudinal and diagonal braces, center-to-center distance = 1,300 mm. Standard measurement is 1.30m. - Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From 1.50m length, there is a small surcharge on the stated price! - Custom dimensions (other center-to-center distances) available on request, subject to surcharge and longer delivery times due to special fabrication! - Unless otherwise specified, we supply the racking with a center distance of 1.30m. - In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. - Delivery includes all bolts and nuts (shipping within Germany by parcel direct from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Kondisi: baru, Tahun pembuatan: 2025, Cantilever racking for light loads, single-sided, frame height 2m, shelf length approx. 3m, 50cm deep arms, 200kg per arm, hot-dip galvanized – New equipment: Itodpfx Asxbz Ddjpvjg Price ex works incl. loading: only €895 (net), plus packaging and freight. Price per additional upright: €225 (net) Transport price on request! Manufacturer: Bruckamp Year of manufacture: New equipment Model: Super Light Set components: 4 uprights with 5 arms each / 3 bays with connectors Upright spacing: approx. 1m Total assembled length: approx. 3m Rack height: 2m Base and arm depth: 500mm Robust construction – made from IPE 100 profile steel with fixed welded arms, spaced approx. 330mm apart. Load capacity per upright: 1,000kg Load capacity per arm: 200kg Incl. floor anchors Incl. load rating plate Description: 4 uprights with 1m pitch as a set including all bolts. Key advantages: Easy assembly – the rack is designed for quick and straightforward installation. Versatile – ideal for garages, workshops, or small alcoves, the rack adjusts flexibly to the space. Safe & practical – the rectangular tube arms are fitted with plastic end caps to prevent injuries.

Tahun pembuatan: 2021, Kondisi: baru, en-GB: Cantilever racking, double-sided, 4.16m height, 1.20m arms, 750kg per arm – NEW: Price ex location incl. loading! 1 rack unit with 4 uprights: €3,420 (net)! Transport price within Germany (excluding islands): €550 (net)! Naturally, you can build longer or shorter rack units by omitting or purchasing additional frames (and by varying the bay pitch), this example with 4 frames is just the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 4.16m high, hot-dip galvanized - IPE 160 / 100 Isdpfsfivhfex Apvstg - Each with 2x3 adjustable arms, 1.20m long, 750kg load capacity per arm - With bracing approx. 1.30m - Uprights double-sided, approx. 4160mm high, hot-dip galvanized - Foot and arm depth 1200mm, each with 3 height-adjustable arms - Load capacity at load centre 600mm: 750kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, bay pitch = 1300mm, standard is 1.30m. - Other standard bay pitches available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From bay pitch 1.50m, a small surcharge will apply to the stated price! - Special sizes (other bay pitches) are also available on request, but incur a surcharge and have a longer delivery time as they are custom-made! - If you do not specify a different bay pitch, we will supply the rack with a bay pitch of 1.30m. - With this, the length of a racking row with 4 uprights (3 bays) is approx. 4m. - Supplied with all bolts and nuts (shipped within Germany via parcel direct from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Kondisi: baik (bekas), Approx. 452 Meta shelf panels, 1m x 0.40m / 0.60m – used – : Price per shelf panel: €8 (net, excl. VAT) Itjdpfxeki Txcj Apveg Minimum purchase: 50 units Manufacturer: Meta Type: Meta Clip Year of manufacture: unknown Depth: 60 cm Width 1 m = approx. 52 units Depth: 40 cm Width 1 m = approx. 400 units Some shelf panels show signs of wear or slight deformation at the supports for the shelf carriers. However, a strike with a hammer should suffice to straighten them so they can be reinstalled without problems. Height: approx. 4 cm Load capacity: unknown – should bear at least 100 kg Condition: good Available: immediately Location: Frankenberg / Saxony

Kondisi: baru, Tahun pembuatan: 2026, Approx. 360 bays (more upon request), boltless shelving system, manufacturer: dalminels, dimensions 1.30m x 0.60m (other sizes available), frame height 2.20m (other heights available) – Brand new: Price per starter bay: €119 (net) Price per add-on bay: €99 (net) Purchase only by full truckload; otherwise, transportation costs will be disproportionately high! A truck holds approx. 360 bays (depending on configuration). Manufacturer: dalminels, Italy Model: Errex Year of manufacture: Brand new Finish: Galvanized Frame height: approx. 2.20m (other heights, e.g., 2m, available upon request) Shelf load per level: 141 kg 5 shelves per bay – additional shelves available at extra cost Shelf dimensions: approx. 1.30m x 0.60m (each shelf consists of 3 panels, each 20cm deep) In this system, shelves are inserted into side rails. Condition: New Availability: Delivery time approx. 4 weeks, usually faster – we will be happy to confirm current lead times! Location: Delivery within Germany included Ijdpfxsyhxmns Apvotg Other shelving sizes available upon request: For example: Widths: 1m and 1.30m Depths: 30cm / 40cm / 50cm / 60cm / 70cm / 80cm Accessories available at extra cost: e.g., drawers, dividers, bracing beams as an alternative to cross-bracing, etc. Also available as multi-tier systems!

Kondisi: baik (bekas), Approx. 100 bay shelving racks, Dexion, Frame height 2.20 m, Shelf dimensions 0.46 m x 1 m - used - : Sale only as a complete lot: Price ex location: only €6,500 (net), dismantled, packed and loaded! Manufacturer: Dexion Isdpfx Asi Nqdtopvstg Model: unknown Year of manufacture: unknown Frame height: approx. 2.20 m Number of frames: 144 pcs Shelves: 46×100 cm Number of shelves: 396 pcs Bay depth: approx. 48 cm Condition: good Available: immediately Location: Warehouse Frankenberg P.S. Replacement shelf supports may need to be reordered as new items!

Tahun pembuatan: 2020, Kondisi: baru, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 750kg per arm – NEW –: Price ex location incl. loading! 1 racking unit with 4 uprights €3,210 (net)! Transport cost within Germany (excluding islands): €550 (net)! You can also create longer or shorter racking units by omitting or purchasing additional frames (or by varying the bay width); the example with 4 frames is simply the most common rack configuration! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided rack uprights, approx. 3.50m high, hot-dip galvanized - IPE 160 / 100 - Each upright equipped with 2x3 adjustable arms, length 1.20 m, load capacity 750kg per arm - With bracing approx. 1.30 m - Rack uprights double-sided, approx. 3500mm high, hot-dip galvanized - Base and arm depth 1200 mm, each upright with 3 height-adjustable arms - Load capacity with a load center of 600 mm: 750 kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, e = 1300mm, standard is 1.30m. Other standard bay widths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a width of 1.50m a small surcharge applies to the above price! Special sizes (other bay widths) are also available on request, but incur an additional charge and longer delivery time, as they must be custom manufactured! If you do not specify otherwise, the racking will be supplied with a bay width of 1.30m. Itjdpfx Ajfivhgepvog With a racking row of 4 uprights (3 bays), the length is approx. 4m. Supplied with all bolts and nuts (delivery within Germany via parcel from Würth), floor anchors not included. Other configurations (upright height, arm lengths, arm types, etc.) available on request! Please contact us!

Kondisi: baik (bekas), Tahun pembuatan: 2019, Warehouse building consisting of cantilever and pallet racks, manufacturer OHRA, footprint approx. 867 m² – used - : Price ex location: €99,500 (net), for self-disassembly! Disassembly service available for an additional charge upon request. Material to close one gable end is also available at extra cost! Manufacturer: OHRA Year of construction: 2019, sheet metal 2021 Building dimensions: Width: approx. 17.35 m Length: approx. 50 m Rack height: approx. 6,385 mm Ridge height: approx. 7.10 m After dismantling, one of the long sides of the building will be open (currently where it adjoins the existing hall) Cantilever rack: 2 rows of 25 double-sided frames each = total 50 double-sided cantilever rack frames Arm length: 1.20 m Arm load: 1,400 kg Load center: 600 mm Upright load per side: 4,200 kg Axis spacing: 2 m Arms are bolted on Arms with anti-roll-off device, system for securing loads Including pallet beams Ground level plus 3 arm levels per side Total depth: 2.70 m (2x 1.20 m + 30 cm frame) Aisle width: 3.25 m K-Foot-60-IPE 300-1200-1200-RS-A-RAL K-Roof arm-K60-IPE 120-2750-S6°-PW4-A-RAL Pallet rack: Manufacturer: OHRA P3 pallet racking system Year: 2019 Bay width: 2,900 mm, four bays at 2.40 m length Load per level: 2,000 kg Load per bay: 6,000 kg Top edge 1st level (buckling length): 800 mm 1 row with 17 frames, 1 row with 19 frames (at two locations with pipes) Total number of frames: 36 Rack length: approx. 48.10 m Frame depth: 1.10 m Frame width: approx. 10 cm Beam height: approx. 10 cm Beam thickness (bearing surface): approx. 5.5 cm Beams: IPE Floor plus 3 beam levels Number of beams: approx. 162 pieces at 2.90 m, approx. 24 pieces at 2.40 m length Snow load zone: 1 (0.65 kN/m²) Itsdpoyk H Riefx Apveg Wind zone: 1 / terrain category 0.48 kN/m² Available: immediately Condition: good, slight rust on some outer frames and faded paint Location: Hockenheim area Drawings available as PDF, itemized list, structural analysis. The sideloader shown in the pictures is also for sale for an additional charge (recently fitted with a nearly new battery, cost approx. €9,600 (net)).

Kondisi: bekas, ä19526 Itedpfx Apsyrq Nloveg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1987, Mesin Press + Gunting Baja Profil Produsen: Peddinghaus Tipe: Peddimaster 40/60H Tahun produksi: 1987 Data Teknis Merek: Peddinghaus Tipe: Peddimaster 40/60 H Tahun produksi: 1987 Kekuatan gunting: 60 t Kekuatan tekan: 40 t Gunting baja profil Besi L dan T pada 90°: 100 x 10 mm pada 45°: 65 x 8 mm Unit pemotong sudut Isdpfx Aexp Ndhspvetg Dengan pemotong persegi untuk pelat hingga 10 mm Gunting baja strip untuk strip baja: 380 x 8 mm atau 150 x 14 mm Berat: kira-kira 1,5 t Dimensi: kira-kira 1,7 x 1,05 x 1,98 m Aksesori - batas kontak elektrik 3000 mm - meja penahan - penahan tekan yang dapat disetel - paket perlengkapan besar sesuai foto Semua informasi tanpa jaminan. Demonstrasi dapat dilakukan kapan saja di ruang pamer kami.

Kondisi: baik (bekas), Tahun pembuatan: 1995, Sistem lift, Kardex, Ukuran baki: 1250x825mm, tinggi 7m, – bekas - : Harga ex lokasi: 13.950 € (netto), dibongkar, dikemas, dan dimuat, belum termasuk transportasi dan pemasangan ulang! Produsen: Bellheimer / Kardex Tipe: Shuttle 1250x825x10000 Nomor unit: 95.008812/001 Tahun pembuatan: 1995 Ukuran baki: 1250x825mm Tinggi unit: sekitar 7m Kedalaman: sekitar 2,70m Lebar: sekitar 1,6m Jumlah baki: 44 unit Beban kerja total yang diizinkan: 2x10.000kg Beban per rak yang diizinkan: 250kg 3x400V, A: 3x5,2, KW 3,6 Kondisi: bekas Tersedia: mulai sekitar minggu ke-13/2026 Lokasi: Speyer Iodpfx Apeyrqvfsvstg

Kondisi: baik (bekas), Approx. 27 coil stacking racks – used –: Only sold as a complete lot: Price per piece ex location: €139 (net, excluding VAT)! Manufacturer: unknown Model: unknown Year of manufacture: unknown Dimensions (approx.): L: 1 m, H: 1 m, D: 0.62 m Self-weight: approx. 72 kg Load capacity: 3,000 kg Condition: good Available: immediately Location: 67346 Speyer Ijdew Hqc Aepfx Apvjtg

Tahun pembuatan: 2021, Kondisi: baru, Single-sided cantilever rack, 3m height, 1.20m arms, 500kg per arm – New –: Price ex location, incl. loading! 1 racking unit with 4 uprights: €1,833 (net)! Transport price within Germany (excluding islands): €500 (net)! Of course, by omitting or purchasing additional frames, you can also configure longer or shorter racking units (or by adjusting the bay spacing); this example with 4 frames is simply the most common racking solution!! A hot-dip galvanized cantilever rack system, consisting of: Single-sided rack uprights approx. 3,000 mm high, hot-dip galvanized, IPE 160 Base and arm depth 1,200 mm with 3 adjustable cantilever arms each Load capacity with load center at 600mm: 500 kg per arm / 2,250 kg per upright Itodpfxeddmpvj Apvog With 4 uprights per level: 4 x 500kg = 2,000 kg, arms made of IPE 80, With longitudinal and diagonal bracings, axle spacing = 1,300mm, standard is 1.30m. Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m, a small surcharge applies to the stated price! Special dimensions (other bay spacings) are also available on request, subject to surcharge and with longer delivery times as these need to be custom-made! If you do not specify other bay spacings, we will deliver the racking unit with a bay spacing of 1.30m. In this case, the length of a single row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipped within Germany as parcel directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types etc.) available! Please contact us!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, 100 mesh decks, 1 ton per pallet location, for pallet racking 1.20m deep - New Product -: Price per unit ex location: €20 (net, excl. VAT)! Only available as a complete lot! Manufacturer: MantaMESH Model: MantaMESH Year of manufacture: 2024 Condition: Very good Availability: Immediately Location: 58540 Meinerzhagen ANSI MH 26.2 - 2017 compliant Load rating independent of beam type Uniformly Distributed Load (UDL) (kg): 1000 Permissible deflection (mm): 7.3 Ultimate failure load (kg): 2000 Features: • ANSI MH 26.2 - 2017 compliant • Made in Germany • Pre-galvanized, hemmed support bars • SafeEDGE® on mesh and supports • Mesh provides over 70% open area • EU Design Registration No. 002435099-0003 Specifications: Beam type: Box 50 Rack depth (mm): 1200 Mesh depth (mm): 1202 Mesh width (mm): 879 Top wire spacing (mm): 25 Bottom wire spacing (mm): 100 Top wire Ø (mm): 4 Bottom wire Ø (mm): 5 Support bar thickness (mm): 1.2 Number of support bars: 5 Finish: Pre-galvanized Weight (kg): 12.24 Iedettv Tgepfx Apvstg Front: Bend (mm): 30 Bend type: External Bend direction: Downward Rear: Bend (mm): 30 Bend type: External Bend direction: Downward

Kondisi: baik (bekas), Hanging shelving system for pallet racking, retrofit, 200 shelf compartments – used –: Price ex-site: €2,950 (net)! Manufacturer: Speedcell Itsdpeurya Esfx Apvsg Type: Picking Racks Speedcell Storage Year of manufacture: unknown 2 units, 2.7m wide each 2 units: Per unit: 5 hanging systems per row – 4 rows in depth, total 20 hanging shelves with 5 compartments each = 100 compartments per rack. Increases storage density by up to 60% Reduces labor costs by up to 40% Condition: good Availability: immediately Location: 45731 Waltrop

Kondisi: bekas, Grinding wheel diameter 350 mm Number of stations 2 Maximum grinding wheel width 125 mm Workpiece support surface (each) 470 x 260 mm Dimensions (LxWxH) 1.32 x 0.78 x 1.3 m Isdpfx Aetqqmcepvjtg - Workpiece support tiltable -

Kondisi: bekas, Tahun pembuatan: 1978, Maximum clamping diameter: 17.5 mm Itjdpfx Aetqqpyopveg Grinding spindle speed: 4,500 rpm Maximum clearance angle: 45° Total power requirement: 0.55 kW Machine weight approx.: 120 kg Machine dimensions (L x W x H): 0.54 x 0.47 x 1.31 m = Engraving cutter grinding machine

Kondisi: baik (bekas), ca. 117 stackable racks, post racks, 2 types – used –: Price (net), ex location – only bulk purchase per type! Type 1: €125 each Type 2: €125 each Manufacturer: unknown Year of manufacture: unknown Itsdpfxjtq Htre Apveg Type 1 – 75 units – Stackable racks with wooden floor, Green Dimensions: W=1940 mm / D=1200 mm Type 2 – 42 units – Stackable racks with wooden floor Grey W=2400 mm / D=1200 mm Condition: good Available: immediately Location: 77933 Lahr

Kondisi: bekas, Straightening and welding plate made of cast steel and grey cast iron, heavily ribbed Itodpfx Asdzqq Uepvsg Length: 2000 mm Width: 1200 mm Thickness: 150 mm Working height: 800 mm Plate thickness: 35 mm - Subframe made of solid wood Weight: approx. 950 kg Good surface condition

Kondisi: bekas, Straightening and welding plate made of cast steel/cast iron, heavily ribbed former marking-out and measuring plate heavy-duty straightening plate Length: 2000 mm Width: 1000 mm Thickness: 160 mm Working height: 850 mm Plate thickness: approx. 35 mm throughout Iedpfxou Inwfs Apvstg - 3 pieces of height-adjustable feet Weight with feet: 680 kg good condition

Kondisi: bekas, Straightening and welding plate, steel cast/grey cast iron, heavily ribbed Heavy-duty straightening plate Length: 1985 mm Width: 1000 mm Thickness with ribs: 220 mm Working height: 860 mm Iedpskpwuxjfx Apvetg Plate thickness: approx. 35 mm (continuous) - 4 height-adjustable feet Weight: 1050 kg

Kondisi: bekas, Straightening and Welding Plate, Cast Steel / Cast Iron, Heavily Ribbed Cast Plate, Heavy-Duty Straightening Plate Length: 1500 mm Width: 1000 mm Thickness: 100 mm Plate Thickness: approx. 37 mm, continuous Table Height: 860 mm Ijdpforl U Swox Apvetg - Table base made of steel (custom-built) Weight: 640 kg Good condition

Kondisi: bekas, Steel grinding bench, steel grinding machine ULRICH KLINGEL Type HSM 4 Year of manufacture: approx. 1976 with 4 workstations Grinding wheel diameter: 1x 100; 1x 150; 2x 200 mm Grinding wheel speed: approx. 1400/2800 rpm Motor power: approx. 1 kW Power supply: 380 Volt, 50 Hz - 3x oscillating grinding tables - All 3 workstations equipped with swiveling tables, infeed movement via handwheel - One workstation (the 4th) with a swiveling and tiltable table, infeed movement via handwheel - 1 diamond grinding wheel Ø 100 mm mounted (heavily worn) - 2 corundum grinding wheels mounted Ø 200 mm Ijdpfxsdz Srks Apvstg - Clockwise and counterclockwise rotation at each station - Coolant system integrated in machine base Space requirement L x W x H: 1100 x 1000 x 1300 mm Weight: approx. 450 kg Good condition

Kondisi: bekas, en-001 Itedpfxeyhc N Nj Apveg

Kondisi: baik (bekas), Schneidemaschine für Stahldrahtbleche Ijdpsgiplvsfx Apvotg Schnittlänge: 3900 mm Abmessungen: Länge: 5100 mm Breite: 1700 mm Höhe: 3100 mm