Beli Rak Oven bekas (8.676)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used Cantilever Racking: Bolted System, Hot-dip Galvanised Version Scope of delivery: - 4 rack uprights, height 4,160 mm, with base section, usable depth 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction from IPE sections (bolted system) - Surface hot-dip galvanised - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity plates C4 according to DIN standard Duedpfjd Tqalsx Ahuer - Specialist telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for doweling, and capable of bearing all applied loads. The customer is responsible for checking and ensuring the substrate condition, bearing capacity, and obtaining any necessary official approvals. Uprights are to be anchored to the ground by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, uprights should have at least 500 mm clearance above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: Dsdeh Ek Dajpfx Ahusur - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized finish Scope of delivery: - 4 rack uprights, height 3,000 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standards - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance delivery notification. The material is sensibly packed for easy unloading. Duedpfemhh Anex Ahusr When installing outdoors, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for doweling, and capable of bearing the applied loads. Floor condition and load capacity as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the trade association, it is recommended that the uppermost storage level has at least 500 mm clearance above the top edge of the upright.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm upright distance Including fastening material (floor anchors not included) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and expansion always available on request) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Includes fixing material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany Duedpfofdkb Uex Ahusr - Short delivery time - Pickup on site possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight forwarding with prior notification before delivery. Materials are packaged for easy unloading. When installing outdoors, load capacities are reduced by wind and snow load. The foundation must be concrete, level, and suitable for dowelling as well as capable of bearing the applied loads. The substrate condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and is not recommended. According to professional association guidelines, it is recommended that the rack uprights have at least 500 mm projection above the uppermost storage level.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, de-to-en-001 Duedsguk A Hopfx Ahuer

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking used: Bolt system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 3,000 mm, with foot section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard type - Including longitudinal and diagonal bracing for 1,300 mm center distance - Including mounting hardware (excluding floor anchors) * (Delivery time approx. 1 week) * (All parts undamaged!) * (Spare parts and extensions available at any time) * (Bulk offer available: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt assembly) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay distance - Rack length = 4,000 mm - Including mounting hardware (excluding floor anchors) - Includes assembly instructions and C4 load rating labels according to DIN standard - Expert technical advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight forwarding services with advance delivery notification. The material is securely packed to enable easy unloading. Duedsguk Dkepfx Ahusr When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for dowel anchoring, and able to support the expected loads. The client is responsible for verifying and ensuring substrate conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be secured to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, the rack uprights should extend at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal braces for 4,000 mm racking length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Replacement parts available for reorder and expansion at any time) Dsdpfx Ajmhhf Sehujur - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes horizontal and diagonal braces for 1,300 mm upright spacing - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - Onsite collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for anchoring, and capable of supporting all applied loads. The customer is responsible for checking and ensuring subsoil condition, bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights have a minimum protrusion of 500 mm above the highest storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Screw system in hot-dip galvanized version: Ex-works price: Dodpfx Ahjmhhl Houeur Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms adjustable in height in 100 mm increments Each upright with 3 bolted cantilever arms, usable depth 1,200 mm as standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Includes fixing material (without floor anchors) With assembly instructions and load capacity labels C4 in accordance with DIN standard

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking with roof beams: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with base, usable depth 1,200 mm - 27 cantilever arms, usable depth 1,200 mm, with end stops - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roof structure (*Without timber purlins and trapezoidal sheets for roof construction) - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available to order and system can be expanded at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles Duedpfx Aemhhy Nohujr - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof beams (maximum snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, depth 1,200 mm, with end stops = 4 storage levels - Including longitudinal and diagonal bracing with 1,500 mm upright pitch - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and C4 load signs as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site pick-up possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior delivery notification. The material is packed for easy unloading. The base must be concrete, level, suitable for anchor fixing, and able to withstand applied loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary permits from authorities. The rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to professional association guidelines, rack uprights should have at least 500 mm of upright projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking, painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 rack uprights, height 4,200 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms, each with 1,200 mm usable depth - Longitudinal and diagonal braces for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts and extensions available for reorder at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 730 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load capacity badges C4 as per DIN standard - Expert telephone consultation Dedpfx Ahsmidyfeujur - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipments with advance notice prior to delivery. The material is packed sensibly to enable easy unloading. Delivery can take place approx. 1 - 2 weeks after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowelling, and be able to withstand the imposed loads. Soil composition, bearing capacity, and any required official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to the professional association’s recommendations, the top storage level should extend at least 500 mm above the top edge of the uprights.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Used double-sided cantilever racking: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided uprights, height 3,500 mm, with bases, each 1,200 mm - 24 cantilever arms, 1,200 mm deep, standard - Incl. longitudinal and diagonal bracing for 1,300 mm axle spacing - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side 2,250 kg Djdpfx Ahjmkixwjujur - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including mounting material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification before delivery. Material is packed sensibly for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subsoil must be concrete, level, suitable for doweling, and able to withstand the loads. The floor condition, bearing capacity, and any required building permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to occupational health and safety, it is recommended that the racks have a projection of at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including bracing sets (longitudinal and diagonal) for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reordering and extension possible at any time) - (Offer also available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Including assembly instructions and load plates C4 according to DIN standard - Expert telephone consultation Djdpjfdkbhefx Ahusur - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with notification prior to delivery. The material is packed in a practical way to enable easy unloading. Please note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for dowelling, and must be able to accommodate the acting loads. The customer is responsible for verifying ground condition, load-bearing capacity, and any required official permits. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German trade association recommendations, rack uprights should extend at least 500 mm above the uppermost storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal bracing for a rack length of 4,000 mm (upright spacing 1,300 mm) Dsdpfxsmhh Dto Ahueur - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight with prior notification before delivery. The material is sensibly packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The surface must be level concrete, suitable for dowelling, and able to bear the acting loads. Floor condition and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the ground by the customer; wall anchoring is not required and not recommended. According to trade association recommendations, the uprights should extend at least 500 mm above the highest storage level.

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut per lengan kantilever: 500 kg, tinggi rak: 3.200 mm, panjang total: 2.100 mm, tinggi total: 3.200 mm, jarak gandar: 1.000 mm, kapasitas beban per penyangga: 2.500 kg, Cantilever racking, hot-dip galvanized design: Scope of delivery: - 3 rack uprights, height 3.2 m, with base section, 1.8 m usable depth (total depth 2 m) - 12 cantilever arms with 1.8 m usable depth (for chipboards approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing: 1.3 m) - Fastening materials (bolts, nuts, and washers) Dusdpfsqt Dmysx Ahuer Net price: €2,490.00 plus VAT Detailed description: - Robust steel structure made from IPE sections (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms: 1,800 mm usable depth - (For chipboard panels up to 2,100 mm deep) - Cantilever arms are height-adjustable in 100 mm increments - Each upright fitted with 4 bolted cantilever arms as standard (= 5 storage levels) - Load capacity per arm: 500 kg - Including longitudinal and diagonal braces for 1,000 mm upright spacing - Rack length: 2,100 mm - Inclusive of fastening material (without floor anchors) - Includes assembly instructions and C4 load labels in accordance with DIN standards - Made in Germany - Short delivery times Our cantilever racks are manufactured exclusively in Germany. We provide reliable transport with advance delivery notification. The material is sensibly packaged to facilitate easy unloading. Delivery for stock items can be made approx. 1 week after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixing, and able to support the required loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to professional industry guidelines, it is recommended that the uprights have a minimum 500 mm projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 upright frames, 2,600 mm height with 1,000 mm base segments - 12 cantilever arms, 1,000 mm depth, standard version - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and expansion available at any time) - (*Offer available in larger quantities: approx. 90 upright frames in stock) Duodpfsguk Dvex Ahuer Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base segments and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable shipping with advance delivery notice. Material is packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and capable of withstanding the applicable loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Wall anchoring is neither necessary nor recommended. According to occupational safety guidelines, it is recommended that the upright frames have at least a 500 mm projection above the top storage level.

Kondisi: bekas, Data teknis: Jumlah piston: 6 Diameter piston: 80 mm Dodpjyz T Anefx Ahueur Koneksi ke sistem pemanas sentral (CO) Ukuran rak: 3000x1300 mm Celah: 395 mm Tekanan hidrolik 6 penekan samping pneumatik Saklar keselamatan Daya motor: 1,5 kW Pasokan listrik: 400 V Dimensi keseluruhan: Panjang: 3650 mm Lebar: 2100 mm Tinggi: 2040 mm

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 1.500 kg, panjang total: 3.200 mm, lebar total: 1.700 mm, tinggi total: 2.400 mm, Το σύστημα αυτό αποτελείται από έναν βιομηχανικό ηλεκτρικό φούρνο με εσωτερικές διαστάσεις 1700 × 3200 × 2100 mm, σχεδιασμένο για να προσφέρει σταθερή και αξιόπιστη θερμική επεξεργασία σε απαιτητικές εφαρμογές. Ο φούρνος τροφοδοτείται από μία υψηλής απόδοσης ηλεκτρική μονάδα boiler (2200 × 2100 × 300 mm), εξοπλισμένη με 3 συστοιχίες αντιστάσεων (σύνολο 9 θερμαντικά στοιχεία), με συνολική εγκατεστημένη ισχύ 27 kW. Η διαμόρφωση αυτή εξασφαλίζει ομοιόμορφη κατανομή της θερμότητας και επαρκή ενέργεια για σταθερή και αποδοτική λειτουργία υπό συνεχή φόρτο εργασίας. Για τη βελτιστοποίηση της εσωτερικής κυκλοφορίας του αέρα και της θερμικής απόδοσης, το σύστημα ενσωματώνει 2 φτερωτές Ø350 mm, οι οποίες κινούνται από 2 ηλεκτροκινητήρες ισχύος 1,5 kW έκαστος (2 HP). Η διάταξη αυτή διασφαλίζει αναβαθμισμένη κυκλοφορία του αέρα, συμβάλλοντας στην ομοιογενή κατανομή της θερμοκρασίας σε όλο τον θάλαμο. Ο φούρνος είναι πλήρως μονωμένος με πάνελ υψηλής πυκνότητας πάχους 180 mm, τα οποία μειώνουν σημαντικά τη θερμική απώλεια, διασφαλίζοντας μέγιστη ενεργειακή απόδοση και απόλυτη στεγανότητα του θαλάμου. Η κατασκευή αυτή υποστηρίζει σταθερές συνθήκες λειτουργίας και ελαχιστοποιεί την κατανάλωση ενέργειας. Επιπλέον, η μονάδα διαθέτει προηγμένο πίνακα ελέγχου με όλες τις βασικές λειτουργίες και παραμέτρους λειτουργίας. Το περιβάλλον χρήστη έχει σχεδιαστεί με έμφαση στην εργονομία και την επιχειρησιακή ευελιξία, επιτρέποντας στον χειριστή να ρυθμίζει και να ελέγχει εύκολα το σύστημα ανάλογα με τις εκάστοτε απαιτήσεις παραγωγής. Γιατί ξεχωρίζει το σύστημα: - Υψηλή ισχύς (27 kW) - Βελτιστοποιημένη κυκλοφορία αέρα (διπλός κινητήρας + φτερωτές) - Ενισχυμένη θερμομόνωση (πάνελ 180 mm) - Φιλικό και ολοκληρωμένο σύστημα ελέγχου - Σχεδιασμένο για αξιοπιστία, αποδοτικότητα και βιομηχανικές απαιτήσεις Duedoyzw Ihjpfx Ahuor

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Το σύστημα αφορά έναν βιομηχανικό φούρνο με συνολικές διαστάσεις 5000 × 2500 × 3200 mm, σχεδιασμένο για υψηλής απόδοσης θερμική επεξεργασία με μέγιστη αποδοτικότητα και αξιοπιστία. Η μονάδα είναι εξοπλισμένη με σύστημα αερίου λέβητα, ενσωματωμένο με τρεις ηλεκτροκινητήρες υψηλής απόδοσης που διασφαλίζουν ιδανική παροχή ισχύος και σταθερή λειτουργία υπό απαιτητικές συνθήκες. Αυτά συνδυάζονται με τρεις πτερωτές Ø452 mm, οι οποίες έχουν επιλεχθεί προσεκτικά για την επίτευξη άριστης ροής αέρα και τη μέγιστη μηχανική αποδοτικότητα σε όλο τον θάλαμο. Η κατασκευή του φούρνου είναι πλήρως κλειστή, με πάνελ μόνωσης υψηλής αντοχής 180 mm, σχεδιασμένα ειδικά για ελαχιστοποίηση θερμικών απωλειών, εξοικονόμηση ενέργειας και πλήρη στεγανοποίηση του θαλάμου. Αυτή η δομή εξασφαλίζει σταθερές εσωτερικές θερμοκρασιακές συνθήκες και βέλτιστο έλεγχο της διαδικασίας. Επιπλέον, το σύστημα περιλαμβάνει έναν προηγμένο πίνακα ελέγχου, παρέχοντας όλα τα απαραίτητα δεδομένα λειτουργίας και δυνατότητες ρύθμισης. Η διεπαφή έχει σχεδιαστεί με έμφαση στη φιλικότητα προς τον χειριστή και την ευκολία στη χρήση, επιτρέποντας αποδοτικό χειρισμό από το τυπικό προσωπικό χωρίς συμβιβασμούς στην ακρίβεια ή την απόδοση. Dsdpfjyzw E Hjx Ahujur

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, jumlah laci: 16, masa garansi: 12 bulan, PULL-OUT RACK FOR GLASS SHEET STORAGE M80-16 YEAR OF MANUFACTURE 2026 / BRAND NEW We are a manufacturer of pull-out racks for storing glass sheets (crates with glass) or other panel-shaped materials (sheet metal, quartz sinter, polycarbonate, furniture panels). Our racks are designed and manufactured in-house at our facility in Poland. The materials we use for manufacturing our racks are certified for durability and are subject to ongoing quality control. The rack consists of extendable, slightly inclined drawers. The rack allows savings of up to 75% of storage space, as all compartments are built parallel to each other and are only 10 millimeters apart. We offer rack versions in various sizes and load capacities. After consultation, we can also manufacture racks to custom specifications, taking your individual requirements into account. The inclination of the compartments depends on the assembly orientation: it can be left or right. We particularly recommend the rack for glass processing workshops, stonemasonries, carpentries, and advertising workshops aiming to make efficient use of space. The racks are delivered flat-packed and must be assembled by the customer. Assembly is straightforward, as our many years of experience have allowed us to develop a well-thought-out product, and assembly is hassle-free using the included instructions. Our technical department is always available for support. If you prefer on-site assembly by our technician, this can be arranged for a fee. TECHNICAL DATA OF THE M80-16 RACK Application: for individual glass sheets 255 cm x 160 cm Maximum glass sheet size: 275 cm x 170 cm Number of compartments: 16 Width of glass support rail: 8 cm Length of glass support rail: 308 cm Material supporting the glass sheets: Wooden board 308 cm x 8 cm x 2.5 cm Height of the structure (A): 218 cm Width of the structure (B): 254 cm Depth of the structure (C): 317 cm Required operating space: 15 m² Floor requirements: smooth/level Number of bearings per compartment: 8 pcs Front wheel: Ø160 / reinforced polyamide Rear wheel: steel bearing wheel / roll-formed profile Color: RAL 7040 (grey) Corrosion protection: Steel parts phosphated and powder-coated Permissible load per compartment: 900 kg Total permissible load of rack: 14,400 kg Compartment tilt: left or right, depending on assembly Assembly time: 10 hours Number of persons required for assembly: 2 people DOCUMENTS SUPPLIED WITH THE M80-16 RACK - Operating instructions - Assembly instructions - Data plate - Warranty: 12 months Dujdshbduzjpfx Ahuor Our company delivers racks for glass sheet storage throughout the EU and to other countries.

Kondisi: bekas, trans_001 Dodpfx Aewub H Ishujur

Kondisi: bekas, Tahun pembuatan: 2009, EFFE&CI TP 1C 1S 2500X4200X4mm – Tahun 2009 Tungku Tempering Dimensi Maksimum: 2500 x 4200 mm Dujdpfeyykpcsx Ahuor Ketebalan: 4 mm Daya: 600 kW

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, jumlah laci: 12, masa garansi: 12 bulan, The subject of this sale is a storage rack for storing glass panes (321 cm x 255 cm) in crates (12 x 2500 kg): e.g., glass, quartz sinter, polycarbonate, furniture boards, stone or other sheet materials. The rack features pull-out drawers with a slight incline. Dusdpfxof Sqf Ue Ahujr This design allows you to save up to 75% space, as all drawers are parallel to each other and spaced only 10 millimeters apart. We offer various size and capacity configurations. Upon request, we can also manufacture racks with different specifications tailored to your individual requirements and site conditions. We recommend these racks for glass, stone, furniture, and advertising companies that value efficient use of space.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, jumlah laci: 30, masa garansi: 12 bulan, Our company (EXPOGLASS®) manufactures machinery and glass racks for the glass industry. Our product range includes a pull-out glass rack 321 x 255. New product available upon request. Technical specifications: - Number of drawers: 30 - Pane size: 2550 x 3210 mm for storage - Load capacity per drawer: 1500 kg - Loading area width: 80 mm - Total rack width: 4460 mm - Orientation (drawer tilt side): universal (depending on installation) - Number of positioning rollers per drawer: 8, fitted with bearings - Construction: modular (can be combined) - Front wheel material of drawer: floor-protecting polyamide - Rear wheel of drawer: steel, turned and mounted, with double flange, running on steel rail Duedjh Uudvopfx Ahuer We export our products worldwide.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, jumlah laci: 10, masa garansi: 12 bulan, PULL-OUT RACK FOR GLASS SHEETS D220-10 YEAR OF MANUFACTURE 2026 / BRAND NEW We are a manufacturer of pull-out racks for storing glass sheets (crates with glass) or other panel-type materials (sheet metal, quartz sinter, polycarbonate, furniture panels). Our racks are entirely developed and manufactured by our company in Poland. The materials we use for manufacturing our racks are certified for durability and continuously subjected to quality control. The rack consists of extendable, slightly inclined drawers. The design allows up to 75% savings in storage space, as all compartments are built parallel to each other and only 10 millimeters apart. We offer rack versions with various dimensions and load capacities. Following consultation, we are also able to manufacture a rack with custom specifications to match your individual requirements. The inclination of the compartments depends on the installation situation: it can be left or right. We particularly recommend the rack for use in glassworks, stone workshops, furniture workshops, and advertising companies that want to utilize their space efficiently. Assembly of the rack is very straightforward, as our many years of experience have enabled us to develop a well-thought-out product, which is easy to assemble with the included assembly instructions. Our technical department is always available for assistance. Alternatively, if you prefer our technician to supervise the assembly, this service is available for a fee. TECHNICAL DATA FOR RACK D220-10 Application: Glass sheets 321 cm x 255 cm in wooden crates Storage of individual glass sheets: YES Maximum crate size: 345 cm x 275 cm Number of compartments: 10 Shelf strip width for glass: 22 cm Shelf strip length for glass: 395 cm Material on which glass sheets are placed: Steel beams covered with ash wood strips (5 pieces) Structure height (A): 335 cm Structure width (B): 368 cm Structure depth (C): 407 cm Required space for proper use: 29 m² Base requirements: smooth/level Number of bearings per compartment: 8 Front wheel: Ø160, solid / reinforced polyamide Rear wheel: steel ball bearing wheel / rolled on profile Colour: RAL 7040 (grey) Corrosion protection: Phosphated and powder-coated steel parts Permissible load per compartment: 2,500 kg Total permissible load of the rack: 25,000 kg Inclination of compartments: to the left or right, depending on installation Assembly time: 7 hours Number of people required for assembly: 4 Drawers: interconnected (to reduce transport costs) Loading glass sheet crates into the drawer: with forklift, gantry crane, truck-mounted crane. DOCUMENTS SUPPLIED WITH THE D220-10 RACK - Operating instructions - Assembly instructions - Data plate Dusdpfx Aehcipgohuer - Warranty: 12 months The product is delivered fully ready for use. Our company supplies glass storage racks within the EU and to other countries.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, jumlah laci: 26, masa garansi: 12 bulan, SLIDING SHELF FOR GLASS SHEET STORAGE M80-26 YEAR OF MANUFACTURE: 2026 / BRAND NEW We are a manufacturer of pull-out shelves for storing glass sheets (crates with glass) and other panel-based materials (sheet metal, quartz sinter, polycarbonate, furniture boards). Our shelves are developed and manufactured entirely in-house in Poland. The materials we use for production are certified for durability and undergo continuous quality control. The shelf consists of extendable, slightly inclined drawers. This shelving system can save up to 75% of storage space, as all compartments are built parallel to each other and only 10 millimeters apart. We offer shelf versions with various dimensions and load capacities. After consultation, we can also manufacture shelves according to your specific requirements and preferences. The compartment inclination depends on the installation: it can be left or right. This shelf is especially recommended for glassworks, stone workshops, furniture manufacturers, and advertising workshops looking to utilize their space efficiently. The shelves are shipped in packages and must be assembled on-site. Assembly is easy thanks to our many years of experience and the included installation manual. Our technical department is always available to provide support. If you prefer on-site assembly supervision, our technician can attend for a fee. TECHNICAL SPECIFICATIONS OF SHELF M80-26 Application: For individual glass panels 255 cm x 160 cm Maximum glass panel size: 275 cm x 170 cm Number of compartments: 26 Width of glass support bar: 8 cm Length of glass support bar: 308 cm Material for glass support: Wooden board 308 cm x 8 cm x 2.5 cm Height of structure (A): 218 cm Width of structure (B): 384 cm Depth of structure (C): 317 cm Required floor area for proper use: 23 m² Substrate requirements: flat/level Number of bearings per compartment: 8 pcs Front wheel: Ø160 / reinforced polyamide Dedpfx Aof S Hh Tshusur Rear wheel: steel bearing wheel / roll-formed profile Color: RAL 7040 (grey) Corrosion protection: Steel parts phosphated and powder-coated Permissible load per compartment: 900 kg Permissible total load: 23,400 kg Compartment tilt: to the left or right, depending on assembly Assembly time: 7 hours Required personnel for assembly: 2 persons DOCUMENTS SUPPLIED WITH SHELF M80-26 - Operating instructions - Assembly instructions - Data plate - Warranty: 12 months The product is delivered fully operational. Our company supplies shelves for storing glass sheets within the EU and other countries.