Beli Retrofit bekas (1.423)

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, Overhaul Year: 2024 Maximum Carbide Saw Blade Diameter: 500/550 mm Saw Motor Power: 6 kW Saw Motor Speed (6 steps): 2,400 – 3,200 rpm Saw Blade Cutting Speed (500-550 mm): 3,800 – 5,500 m/min Saw Blade Feed Rate, stepless adjustable: 0–40 mm/s Saw Height Control, stepless and fully electronic Working Range Square at 90° max.: 160 x 160 mm Working Range Flat at 90° max.: 380 x 60 mm Working Range Round at 90° max.: 165 mm Feed Length: 10–9,999 mm Feed Speed AC Servo max.: 400 mm/s Compressed Air Supply (on-site): 6 bar Weight (saw): approx. 2,850 kg Dimensions LxWxH (saw): approx. 2,900 mm x 1,725 mm x 2,200 mm Footprint LxW: 2,900 mm x 1,725 mm After completion of the retrofit, the machine is in as-new condition both technically and visually. Thanks to its design and features, the machine can be used highly efficiently for a wide range of applications. The positioning system ensures simple and highly profitable operation. The high-performance motor enables short cycle times even when cutting thick-walled profiles or solid materials. The soundproof enclosure keeps noise emissions to a minimum. The machine is fully refurbished in-house according to customer requirements. The following components were replaced or overhauled: - Upgrade to Siemens S7 PLC control system - Upgrade to Siemens HMI control panel - Replacement of ball screw spindle - Replacement of servo motor and servo drive - Replacement of main drive frequency inverter (optional) - New electrical components - New pneumatic lines - Service or replacement of all hydraulic cylinders and valve manifolds - Extraction system overhauled - Minimum lubrication system overhauled - Replacement of common wear parts - Soundproof enclosure refurbished The machine is also equipped with: - Soundproof enclosure - Manual zero-point adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all refurbished or replaced parts. Labour and wear parts are excluded from the warranty. Optional equipment: - Chain magazine for 4/6 m material lengths Predpfouiy Rqex Ab Hjc - Burr-free cutting system (for high-quality cut surfaces without return marks) - Horizontal clamping on the cutting line - End stop in the material feed unit - Reinforced motor, 11 kW - Roller conveyors - Delivery and installation at your site - Training for your staff

Kondisi: bekas, jarak tempuh: 217.050 km, daya: 75 kW (101,97 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: mekanis, berat keseluruhan: 2.161 kg, pendaftaran pertama: 12/2020, panjang ruang muatan: 1.500 mm, lebar ruang muat: 1.350 mm, tinggi ruang muatan: 1.100 mm, kelas emisi: Euro 6, warna: putih, jumlah tempat duduk: 2, panjang total: 4.408 mm, lebar total: 1.793 mm, tinggi total: 1.823 mm, Perlengkapan: ABS, filter jelaga, kunci sentral, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1983, Tersedia segera dari lokasi: Bandsaw otomatis Behringer HBP 400 A Tahun pembuatan 1983, retrofit tahun 2016, kelistrikan baru, panel sentuh, telah diperbarui ke standar keselamatan terbaru Pjdpfxsxqbn Io Ab Hsrc (Euro 16.250,-) Diameter pemotongan bulat/datar 400 mm Kecepatan potong 19 - 130 m/menit Daya penggerak 5,5 kW Panjang potongan terkecil 10 mm Pengumpanan otomatis 19 – 610 mm Pengumpanan ganda 10 – 9999 mm Berat 3 ton Termasuk rol konveyor lengkap Harga Euro 3.750,- belum termasuk PPN dari lokasi Hamburg

Kondisi: baru, Tahun pembuatan: 2025, The last conventional machine from TOS VARNSDORF's production line still in standard serial production. Robust construction. Also available in the CNC version RET100B or as the retrofitted W100A-R. KEY SPECIFICATIONS Working spindle diameter: 100 mm Spindle taper: ISO 50 Spindle speed: 1120 rpm Table cross travel (X): 1600 mm Spindle head vertical travel (Y): 1120 mm Table longitudinal travel (Z): 810 / 1250 / 1750 mm Prodpfx Abofk I Nie Hsc Spindle travel (W): 900 mm Clamping surface of the table: max. 1500 x 1500 mm Table load capacity: max. 3000 kg

Kondisi: bekas, Tahun pembuatan: 2012, nomor mesin/kendaraan: IntNr231316, Technical data – used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2012 Delivery capacity approx. 500 m³/h Motor power approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W x D x H) Filter stages 1. Prefilter F5 2. Centrifugal separator 3. Final filter F5 (optionally HEPA H13) Filtration efficiency 99% at ≥ 1–2 µm (F9), optional HEPA 99.95% at ≥ 0.1 µm Prjdpfx Asxl U Dleb Hjc Noise level approx. 65 dB (WS2 model similar) Accessories & features • Compact design for direct installation on or next to CNC machines • Extraction stand • Three-stage filtration for effective separation of oil and emulsion mist • Cartridge filter optionally retrofittable with HEPA kit • Easy maintenance, low-noise operation, and durable filter elements Subject to change and error in technical data and information, as well as prior sale!

Kondisi: bekas, jarak tempuh: 96.821 km, daya: 136 kW (184,91 hp), jenis bahan bakar: diesel, pendaftaran pertama: 02/2021, inspeksi berikutnya (TÜV): 03/2027, kelas emisi: Euro 6, warna: putih, bahan bakar: diesel, Perlengkapan: ABS, garansi kendaraan bekas, kantung udara, kendali jelajah, komputer bawaan, kontrol traksi, kopling trailer, kunci sentral, lampu kabut, pemanas parkir, pendingin udara, pintu geser, program stabilitas elektronik (ESP), sistem immobilizer, sistem navigasi,

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, Overhauled: 2024 Saw blade width: 250–285 mm Motor power: 5.5 kW Cutting speed: 35–160 m/min Square workpiece capacity max.: 15–60 mm Round workpiece capacity max.: 15–70 mm Saw feed rate: 2–100 mm/s, steplessly adjustable Cut length: 5–250 mm Feed rate max.: 1000 mm/s Weight (saw) approx.: 1500 kg (magazine) approx.: 800 kg Dimensions LxWxH (saw) approx.: 1100 mm x 1600 mm x 2300 mm Predpfsuizlcox Ab Hsc (magazine) approx.: 7500 mm x 1400 mm x 1600 mm The machine, due to its design and features, is suitable for high-volume cutting of steel and is the predecessor to the KASTOwa C7 and KASTOspeed C9 models. After a complete overhaul (retrofit), the system will be in like-new condition, which is guaranteed by us. On request, the machine is completely overhauled in our facility. This includes, among other things, renewal of the following: - New Siemens S7 PLC control - Retrofit to Siemens HMI - Conversion to fully electronic length selection (optional) - New electrical components - New pneumatic lines - Overhaul or replacement of all pneumatic components - New hydraulic lines - Overhaul or replacement of all hydraulic components - Overhaul of Menzel minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the loading magazine - Enhancement of the safety concept Additionally, the machine features: - A slip magazine for 6 m bars - Hydraulic material feeding unit Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts that we have overhauled or replaced. Labor and wear parts are excluded from the warranty. Options: - Conversion to swarf extraction - Conversion to manual trapezoidal spindle length stop 0–800 mm - Conversion to fully electronic ball screw stop 0–800 mm - Conversion of main saw drive to 18 kW - Delivery and installation at your site - Training for your employees

Tahun pembuatan: 2017, Kondisi: diremaj di bengkel (bekas), dalam proses rekondisi, garansi 12 bulan - Suhu maksimum 200°C; suhu dapat dinaikkan menjadi 250°C sesuai permintaan - Dimensi dalam L 1000 x P 1000 x T 1500 mm - Dimensi luar L 1765 x P 1425 x T 2300 mm - Dengan controller Jumo Dicon Touch - Rel masuk untuk pengisian oven Pjdpfx Aboxp Rn Io Herc - Daya pemanas 36 kW - Berat sendiri: 780 kg - Konektor knalpot; kipas ventilasi dan katup elektrik dapat dipasang sesuai permintaan - Trolley pengisi sesuai permintaan (gambar) - Dokumentasi, deklarasi CE Instalasi dan komisioning dapat kami tawarkan jika diperlukan. Kunjungan dapat dilakukan di gudang kami dengan perjanjian. Oven, oven industri, oven pengering, oven pembakaran, oven pemanas, lemari penghangat, oven temper, oven pengering udara sirkulasi, oven kamar, oven curing.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1977, Langsung tersedia dari likuidasi: Mesin Bubut L & Z Stanko Tipe 16 K 20 Tahun produksi: 1977 Retrofit dan display digital: 2012 Tinggi center: 200 mm Pjdpsxqbhnefx Ab Hsrc Putaran di atas tempat tidur: 400 mm Putaran di atas support: 220 mm Lubang spindle: 55 mm Kecepatan spindle: 12,5 – 1600 rpm Daya: 7,5 kW Chuck Tailstock Perangkat pendingin Pemegang alat Multifix dengan sisipan Tampilan digital Lynette Berat: 2.700 kg Harga: Euro 2.500,— belum termasuk PPN ex lokasi.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2015, Retrofit 2015 Pedpfjuc Uttox Ab Hsrc Karstens K 52 cylindrical grinding machine, CNC control: Eckelmann ENC 66, Workpiece length: 650 mm, Weiss Schleiftechnik retrofit in 2015, Extended by automation in 2023, Spindle power: 7.5 kW, Centre height: 180 mm, Grinding wheel diameter: 500 mm, Straight/angled plunge grinding, Filtration system, Automatic loading between centres, Prismatic conveyor for raw/finished parts

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.500 mm, jarak lintasan sumbu Y: 2.500 mm, jarak gerak sumbu Z: 1.500 mm, kecepatan pemakanan sumbu X: 20 m/menit, laju pemakanan gandar Y: 20 m/menit, laju pemakanan sumbu Z: 20 m/menit, kecepatan spindel (maks.): 7.500 rpm, lebar meja: 2.500 mm, panjang meja: 5.000 mm, beban meja: 25.000 kg, Droop & Rein FOGS in excellent condition - 2014: Complete overhaul and retrofit by the manufacturer - Ongoing maintenance and component renewal up to the present - Heidenhain ITNC 530 control system - Machine can be inspected under power - Spindle Weiss GmbH 1 HSK 100, spindle hours: 14,267 - Spindle Weiss GmbH 2 HSK 100, spindle hours: 10,559 - Spindle 3 Weiss GmbH HSK 50, spindle hours: 6,788 - 2 longitudinal chip conveyors - Tool changer - Blum laser - Triple controllable camera - BA4 setup unit - Wireless handwheel Psdpfx Abjuhqmye Herc - C-axis: infinite rotation - A-axis: ±115 degrees - Special enclosure

Kondisi: bekas, jarak tempuh: 142.050 km, daya: 125 kW (169,95 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: otomatis, berat keseluruhan: 3.500 kg, pendaftaran pertama: 12/2021, panjang ruang muatan: 3.350 mm, lebar ruang muat: 1.770 mm, tinggi ruang muatan: 1.950 mm, kelas emisi: Euro 6, warna: perak, jumlah tempat duduk: 3, panjang total: 5.932 mm, lebar total: 2.020 mm, tinggi total: 2.835 mm, Perlengkapan: ABS, filter jelaga, kunci sentral, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, Year of overhaul: 2024 Saw blade type (Carbide tipped / HSS): 315 - 360 mm Saw motor power: 15 kW Infinitely variable speed: 15 - 130 rpm Blade cutting speed (350mm): 16.4 - 142.8 m/min Saw height adjustment: stepless electronic control Working range square 90° max.: 100 x 100 mm Working range round 90° max.: 110 mm Feed length: 5-970 mm (multiple stroke up to 9999 mm) Feed rate AC servo max.: 300 mm/s Compressed air supply, site-provided: 6 bar Weight of saw (approx.): 1,800 kg Dimensions LxWxH: 1,900 mm x 1,250 mm x 2,100 mm Installation footprint LxW: 1,900 mm x 1,250 mm The machine, due to its configuration and construction, is highly efficient for a wide range of applications. The HMI interface ensures simple and trouble-free operation of the system. After the retrofit, the machine is in as-new condition both technically and visually. Inspection of this saw system is possible at any time. The machine is fully overhauled in our workshop upon customer request. Among other things, the following upgrades are performed: - Conversion to Siemens S7 PLC control - Replacement of the ball screw with servo control - Installation of new electrical components - Renewal of pneumatic lines - New pneumatic components - Overhaul or replacement of hydraulic lines - Overhaul or replacement of hydraulic components - Overhaul of the enclosure - Overhaul of motors - Replacement of all bearings - Replacement of general wear parts The machine additionally features: - Reinforced 15 kW motor - Soundproof enclosure - Spacer extension (for high-quality cut surfaces without return marks) - Motor with frequency control - Minimum quantity lubrication system - Automatic central lubrication system - Pneumatic chip removal at the saw blade Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Labor and normal wear parts are excluded from the warranty. Options: - Mass clamping device for parallel sawing of multiple workpieces - Roller conveyor 4m/6m - Special roller conveyor 4m/6m for bundle clamping - Flat magazine for automatic feed of raw materials up to 6m in length - Online support connection Pjdpfx Abjuizins Hsrc - Delivery and installation at your site - Staff training

Tahun pembuatan: 2017, Kondisi: diremaj di bengkel (bekas), dalam proses rekondisi, garansi 12 bulan - Suhu maksimum 200°C; suhu dapat dinaikkan menjadi 250°C sesuai permintaan - Dimensi dalam L 1000 x P 1000 x T 1500 mm - Dimensi luar L 1765 x P 1425 x T 2300 mm - Dengan controller Jumo Dicon Touch - Rel masuk untuk pengisian oven - Daya pemanas 36 kW - Berat sendiri: 780 kg - Konektor knalpot; kipas ventilasi dan katup elektrik dapat dipasang sesuai permintaan - Trolley pengisi sesuai permintaan (gambar) - Dokumentasi, deklarasi CE Podpfx Aoxp Rnueb Herc Instalasi dan komisioning dapat kami tawarkan jika diperlukan. Kunjungan dapat dilakukan di gudang kami dengan perjanjian. Oven, oven industri, oven pengering, oven pembakaran, oven pemanas, lemari penghangat, oven temper, oven pengering udara sirkulasi, oven kamar, oven curing.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1970, Segera tersedia dari universitas: Mesin frais universal dengan kepala slotting SHW Tipe UF 1 Tahun pembuatan: 1970 Retrofit: 2010 Meja: 700 x 310 mm Perjalanan X/Y/Z: 550/340/420 mm Prjdpfjxqbgwjx Ab Hjc Taper: SK 40 Kecepatan spindle: 46 – 2.200 rpm Gerakan quill: 80 mm Gerakan slotting: 200 mm Feed: 12 – 254 mm/menit Berat: 2 ton Holder SK 40 Ragum hidraulik Harga: EUR 2.500,– belum termasuk PPN, ex lokasi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Zusätzliche Ausstattung: Messsonde: Renishaw TP20 Tasterwechsel: MCR20 (6-fach) Software: „ThomControl“ (mit neuer Software-Version nachgerüstet in 2018) Prodpfexlvcisx Ab Hsc Diese THOME Präzision 3D Sigma wurde 2007 hergestellt. Diese zuverlässige KMG-Maschine bietet präzise Maßkontrollen für die Qualitätssicherung in der Fertigung. Nutzen Sie die Gelegenheit, diese THOME Präzision 3D Sigma KMG zu kaufen. Kontaktieren Sie uns für weitere Informationen. Einsatzbereiche: Messen

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1978, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 960 mm, panjang pembubutan: 10.000 mm, diameter pembubutan: 1.300 mm, lubang spindel: 160 mm, Mesin bubut Wohlenberg model M 1000 BSN dalam kondisi sangat baik. Mesin telah diretrofit dengan Siemens 802. Mesin dalam keadaan hidup dan dapat diuji. Terdapat dua steady rest. Prjdpfxjxprrbe Ab Hjc

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1980, tinggi pembubutan: 4.800 mm, Vollständig überholte Ein-Stand-Senkrecht-Drehmaschine Blansko Modell SKSJ 1A, ausgestattet mit einem Vertikalkopf für Dreh- und Fräsarbeiten Technische Daten: Planscheibendurchmesser: 6.300 mm Äußerer Durchmesser, erreichbar bei maximalem Abstand der Säule: 11.200 mm Pedpfsw Hfm Nox Ab Herc Maximale Werkstückhöhe: 4.800 mm Maximaler Drehdurchmesser bei Säule nahe der Planscheibe: 8.000 mm Maximaler Drehdurchmesser bei maximalem Säulenabstand (für Innendrehen): 16.000 mm Stufenlose Drehzahlregelung der Planscheibe: 0,5–20 U/min Maximales Werkstückgewicht auf der Planscheibe: 125 Tonnen Die Maschine wurde in den Jahren 2024–2025 vollständig überholt und mit folgenden neuen Komponenten ausgestattet: - Neuer Schaltschrank mit CE-Komponenten (Siemens, Schrack usw.) - Neue Siemens 828 Steuerung, 100 kW Hauptantriebsmotor, 27 Nm Vorschubmotoren und ZF-Getriebe mit 1/5 Übersetzung - Neue Kugelumlaufspindel auf 2 Achsen (Vertikalkopf und Querbalken) - Neue Heidenhain-Maßstäbe auf 2 Achsen - Hydraulik- und Versorgungseinheiten mit CE-Komponenten (Rexroth, Brevini, Atos usw.) - Neue Schmieranlage DROPSA-Italy oder vergleichbar - Geometrische Präzision nach ISO-Normen (wie eine neue Maschine) Für weitere Informationen kontaktieren Sie uns bitte.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, manufacturer: Elumatec Model SA/ SAS 142 overhauled: 2024 Max. carbide saw blade: 500 mm Saw motor drive power: 4 kW Saw motor speed: 2800 rpm Saw blade cutting speed (500mm): 4400 m/min Saw height adjustment: stepless, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 150 mm Pedpfx Asuiy Nyob Hsrc Pneumatic feeding length: 5-560, 10-1120 mm Compressed air connection (site): 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2900mm x 1400mm x 1500mm Footprint LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4kW Retrofit Elumatec SA 142 4kW Retrofit Fully automatic saw for non-ferrous metals and plastics The machine is in as-new technical and optical condition following completion of the retrofit. The machine will be fully overhauled in our workshop according to customer requirements. The following components, among others, have been renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - New electrical components - New pneumatic hoses - Maintenance or replacement of all pneumatic cylinders and valve terminals - Minimum lubrication system maintenance - Replacement of general wear parts - Refurbishment of safety enclosure/cabinet Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Labor costs and wear parts are excluded from the warranty. Options: - Expansion of cutting range (flat 90° max.: 300 x 120 mm) - Chip breaker expansion (for high-quality cut surfaces without return marks) - Servo-driven material feed - Servo-driven saw blade feed - Quick clamping device for rear feed stock - Delivery and installation at your location - Training of your staff

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2015, jam operasional: 11.800 h, WHQ 105 CNC tahun 2015 yang telah diretrofit Jarak gerak sumbu X: 1.800 mm Jarak gerak sumbu Y: 1.600 mm Jarak gerak sumbu Z: 1.250 mm Beban meja: 5.000 kg Diameter spindle: 105 mm Kecepatan spindle (maks): 3.300 rpm Panjang meja: 1.400 mm Lebar meja: 1.600 mm Jarak gerak sumbu W: 630 mm Automatic Tool Changer.....40 posisi Pendingin melalui spindle.....20 bar Pelindung cipratan di sekitar meja putar Konveyor serbuk Unit pendingin oli (chiller) Prodpfx Ajr Hdqxob Hjc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Pelat tipe tersedia, Fast precision coordinate measuring machine and gear inspection center. Moving gantry with patented TRICISION™ technology X 900 / Y 1,500 / Z 700 Control unit B5 (retrofit 2021) High-resolution Leitz 3D probe head LSP-S2 Measurement uncertainty according to DIN EN ISO 10360-2: 0.9 + L/350 µm Probe change system with 8 positions Large package with probe accessories Software: PCDMIS CAD++ 2024 12-month warranty Podjv S Dk Eepfx Ab Hjrc Computer, 32" monitor Installation, commissioning, and acceptance according to DIN EN ISO 10360-2,4,5

Kondisi: bekas, jarak tempuh: 95.000 km, daya: 130 kW (176,75 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: mekanis, berat keseluruhan: 3.500 kg, pendaftaran pertama: 10/2020, kelas emisi: Euro 6, warna: putih, jumlah tempat duduk: 3, Tahun pembuatan: 2020, panjang total: 5.986 mm, lebar total: 2.040 mm, tinggi total: 2.590 mm, Perlengkapan: ABS, filter jelaga, kunci sentral, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Technical details: Maximum wheel diameter: 2–45 mm Wheel width: 250 mm Maximum module: 1.5 mm Minimum module: 0.5 mm Control: Fanuc 18i-MB Approx. machine weight: 2.2 t Space requirements: approx. 2100 x 1440 x 1700 mm Additional information: The combined CNC hobbing and worm milling machine KOEPFER MZ 120 is distinguished by its flexible application options and is used in the small module range. By simply swiveling the milling spindle from the horizontal to the vertical position and selecting the appropriate operation mode on the CNC control, the machine can be switched from worm milling to gear hobbing (and vice versa). CNC control: Fanuc 18i-MB (conversational/ISO) CNC axes: X-axis: plunging axis Pjdpfsw Rmakox Ab Horc Z-axis: longitudinal axis C-axis: workpiece spindle B-axis: tool spindle V-axis: loader axis, longitudinal A-axis: swivel axis, tool spindle head (included as option) Y-axis: shift axis (included as option) With the following machining programs: - Worm milling - Gear hobbing - Worm hobbing - Bevel gear and spur gear milling - Bevel gear hobbing Milling cycles: - straight, helical, crowned teeth - radial, radial-axial, climb and conventional milling - roughing, finishing - worm gears - straight-toothed bevel gears, face milling (option: partial process only) - worms [Equipment] - 300-liter coolant tank with LNS Turbo MS 250 chip conveyor - Retrofitted and from year 2021!!! - Kraft und Bauer fire extinguishing system - Vibratory feeder - Machine documentation [Technical data] Workpieces: - Workpiece diameter: 2–45 mm - Max. workpiece length: 250 mm - Gear length: 150 mm - Max. module in steel: • 1 mm (hobbing) • 1.5 mm (worm milling) • 0.5 mm (bevel gear hobbing) Tools: - Cutter diameter: • 16–32 mm (hobbing) • 40–63 mm (worm milling) Machine: - Max. adjustment angle of milling head: • +/- 45° (hobbing) • +/- 30° (worm milling) - Shift stroke: • 34 mm (manual adjustment) • 34 mm (CNC axis) - Collet/mandrel: W 20 - Max. speed of workpiece spindle: 770 rpm - Milling spindle drive: 0.55 kW - Max. speed of milling spindle: 8,000 rpm Axes drives: - X-axis (plunge) / travel 80 mm via CNC - Z-axis (longitudinal feed) / travel 190 mm via CNC - C-axis (workpiece axis) via CNC Rapid traverse: - X-axis: 6,000 mm/min - Z-axis: 6,000 mm/min - Hydraulic unit: 0.37 kW

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 5.200 mm, diameter putar di atas sled silang: 940 mm, diameter pembubutan: 900 mm, lubang spindel: 204 mm, torsi: 3.000 Nm, saluran batang: 204 mm, tinggi total: 3.600 mm, panjang total: 10.820 mm, lebar total: 3.381 mm, lubang collet: 450 mm, hidung spindel: ASA 15, berat keseluruhan: 39.000 kg,

Kondisi: baik (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, hu-001 Predpfxow Hxw Io Ab Hec