Beli Router bekas (427)

Kondisi: bekas, nomor mesin/kendaraan: 008362, Arbeitsbereich Achse X: 3600 mm Arbeitsbereich Achse Y: 1600 mm Arbeitsebene: Mit Vakuum-Konsolenauflagen Cjdpfx Aajx A Tl Aorohf Leistung Haupt-Spindel: 12 KW Anz. kontrollierte Achsen: 5 Achsen Anzahl Bohrspindeln: 32 Anzahl Werkzeugplätze: 22

Kondisi: bekas, Tahun pembuatan: 2005, jam operasional: 6.650 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.600 mm, jarak lintasan sumbu Y: 1.550 mm, jarak gerak sumbu Z: 400 mm, gerak cepat sumbu X: 60 m/menit, pergeseran cepat sumbu Y: 60 m/menit, pergerakan cepat sumbu Z: 20 m/menit, daya nominal (semu): 25 kVA, produsen pengendali: Bosh Rexroth, tinggi benda kerja (maks.): 290 mm, berat benda kerja (maks.): 500 kg, lebar meja: 1.300 mm, panjang meja: 4.000 mm, kecepatan rotasi (min.): 1.200 rpm, kecepatan rotasi (maks.): 24.000 rpm, berat keseluruhan: 5.500 kg, kecepatan spindel (min.): 1.200 rpm, daya motor spindle: 10.000 W, hidung spindel: HSK63F, jumlah spindel: 1, jumlah slot dalam magazin alat: 15, panjang alat: 240 mm, berat alat: 6.000 g, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, ArtisX6 SHORT DESCRIPTION. 1 working electrospindle with 10 kW power; continuous power from 12,000 to 24,000 rpm; working range: 12,000–24,000 rpm. Tool holder: HSK63F. Cjdpjwh Aidefx Aarehf Axis travel ranges: X = 4,600 mm, Y = 1,550 mm, Z = 400 mm, B axis = 180°, C axis = 360° Axis rapid traverse speeds: X/Y plane = 85 m/min; Z = 20 m/min Clearance under gantry: 290 mm 1 automatic disc-type tool magazine, 15 positions. Max. tool length: 240 mm, max. tool weight: 6 kg Drilling unit in L layout, 2.2 kW, spindle speed 4,500 rpm, pitch 32 mm Machine table: wooden (high-quality water-resistant plywood). Dimensions: 4,000 x 1,300 mm. 2 x 4 pneumatically retractable reference pins (ø 25 mm, stroke 115 mm). Tool set: yes (including some never used) Table can be divided into two stations for pendulum (alternate) operation 1 vacuum pump with capacity of 250 m³/h and 500 l buffer tank Machine safety (EU standard): BUMPER collision protection system (no mats, light barriers, etc.) Control: Bosch Rexroth PNC, industrial PC BTV 16, Pentium III processor, 256 MB RAM, 10 GB HDD, network card SERCOS drive control via Profibus Data input: USB stick, LAN Operating system: Windows 2000. ProEmbSys Touch screen display CAD/CAM software: Alpha/CAM Mobile control console with manual control panel Remote diagnostics Interpolation: 5 linear, 2½D circular Connected load: approx. 25 kVA Central lubrication system Weight: 5.5 t The machine is in very good condition, 100% functional. Storage location: Northern Poland.

Kondisi: siap digunakan (bekas), Technische Daten Fräs- und Zapfmaschine ausgestattet mit Zapfwagen, Tischverlängerung und Stützstange Arbeitstischmaße: 1100 x 700 mm Maximaler Werkzeugdurchmesser: 300 mm Frässpindeldurchmesser: 30, 40 und 50 mm Vertikalhub der Spindel: 220 mm Motor: 7,5 kW Drehzahlen: 2900, 4400, 6000 und 8000 U/min Maschine mit spezieller Schutzhaube für beide Verwendungsarten (Fräsen und Zapfen) Leistung und Motoren Spannung: 400 V Anschluss: Dreiphasig Leistung: 7,5 kW Gesamtabmessungen Gewicht: 740 kg Csdpfx Aok Rtg Nsarohf

Kondisi: bekas, nomor mesin/kendaraan: 008172, arbeitsbereich_achse_x_arbeitsbereich_achse_y_arbeitsebene_leist ung_haupt_spindel_anz_kontrollierte_achsen_anzahl_werkzeugplatze Chsdjx A Tbqopfx Aaref

Kondisi: bekas, nomor mesin/kendaraan: 007929, Working area X-axis: 6360 mm Working area Y-axis: 1680 mm Working surface: With vacuum console supports Main spindle power: 12 kW Number of controlled axes: 5 axes Codpfxowgaz Ue Aarohf Number of tool positions: 36

Kondisi: bekas, nomor mesin/kendaraan: 006487, Area kerja sumbu X: 3060 mm Area kerja sumbu Y: 1240 mm Meja kerja: Meja nesting Daya spindle utama: 8,5 kW Jumlah sumbu terkendali: 5 sumbu Jumlah spindle bor: 18 Chsdpsn Rzclofx Aaref Jumlah posisi alat: 16

Kondisi: bekas, nomor mesin/kendaraan: 008115, Area kerja sumbu X: 5200 mm Area kerja sumbu Y: 1550 mm Codpfx Aasw Idd Uerehf Permukaan kerja: dengan penyangga konsol vakum Daya spindle utama: 11 kW Jumlah sumbu terkendali: 5 sumbu Jumlah spindle bor: 19 Jumlah posisi alat: 26

Kondisi: bekas, nomor mesin/kendaraan: 007916, Working area X-axis: 6360 mm Working area Y-axis: 1680 mm Working surface: With vacuum console supports Main spindle power: 12 kW Number of controlled axes: 5 axes Number of tool positions: 36 Chjdpfx Aaewfxkxsrjf

Kondisi: bekas, nomor mesin/kendaraan: 007917, Working area X-axis: 5020 mm Working area Y-axis: 1680 mm Chedpfx Aswfxkroarjf Working table: With vacuum console supports Main spindle power: 12 kW Number of controlled axes: 5 axes Number of tool positions: 36

Kondisi: bekas, nomor mesin/kendaraan: 007980, Area kerja sumbu X: 2050 mm Daya spindle utama: 11 kW Jumlah sumbu yang dikendalikan: 5 sumbu Chjdpfx Aajwml Nkerjf

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin frais carousel CAMAM GC6/6F-2L Jumlah unit frais: 6 Jumlah unit pengamplasan: 2 Jumlah stasiun pemuatan: 6 Panjang material maksimum: 1200 mm Lebar material maksimum: 250 mm Chodpfxox Azu Ee Aarof Tinggi material maksimum: 150 mm Kecepatan maju: 17 m/menit Kapasitas hingga 1800 unit per jam Ideal untuk kaki depan dan belakang kursi, elemen tempat tidur, dan furnitur melengkung.

Kondisi: bekas, nomor mesin/kendaraan: 008272, de-to-hu-it-lt-lv-nb-nl-pl Chodpfx Aaex A Tfveref

Kondisi: baru, Tahun pembuatan: 2024, en-technical-translation-2024-06-16 Chodsxz Smpepfx Aaref

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.500 mm, jarak lintasan sumbu Y: 1.600 mm, jarak gerak sumbu Z: 350 mm, lebar meja: 1.770 mm, panjang meja: 3.550 mm, berat keseluruhan: 9.000 kg, panjang total: 5.890 mm, lebar total: 2.990 mm, tinggi total: 3.125 mm, diameter alat: 140 mm, panjang alat: 200 mm, berat alat: 15.000 g, daya motor majalah alat: 12.000 W, SPECIAL PRICE Contour processing center for drilling, profiling, and contour machining of marble, granite, quartz, ceramics, and Lapitec for kitchen countertops, washbasin tops, and furnishing elements. Codpfoxdiupex Aarehf

Kondisi: bekas, Tahun pembuatan: 2009, ketinggian potong (maks.): 102 mm, lebar pemotongan (maks.): 800 mm, diameter mata gergaji: 315 mm, lebar perataan: 310 mm, panjang total meja penyerut: 1.500 mm, lebar total: 2.120 mm, panjang total: 2.600 mm, tinggi total: 1.300 mm, kecepatan rotasi (min.): 3.000 rpm, kecepatan rotasi (maks.): 10.000 rpm, berat keseluruhan: 900 kg, penghilangan serpihan: 5 mm, penghilangan serpihan untuk perataan permukaan (maks.): 5 mm, jumlah mata pisau planer: 4, kecepatan spindel (maks.): 10.000 rpm, kecepatan spindel (min.): 3.000 rpm, Perlengkapan: doser, 04501 5-Function Combination Machine Felder CF 531 Used, year of manufacture 2009, very good condition Tilting circular saw – tilting spindle moulder – jointer/planer – provision for slot mortising unit Panel saw motor power: 3 kW Scoring unit Sliding table: 2,500 mm length Manual saw blade tilting: 90° - 45° Saw blade diameter: 250 – 315 mm Spindle diameter: 30 mm Max. cutting height: 102 mm Cutting width approx. 800 mm Outrigger table with telescopic crosscut fence Crosscut fence pivotable with degree scale Spindle moulder motor power: 3 kW Spindle table opening diameter: 180 mm Max. cutter diameter: 300 mm Spindle diameter: 30 mm Manual spindle tilting: 90° - 45° Spindle speed: 3,000 / 6,000 / 8,000 / 10,000 rpm Planer/thicknesser motor power: 3 kW 4-knife cutterblock Jointer table length: 1,500 mm Jointer table width: 310 mm Chsdpfx Asxzk Thoarof Max. chip removal: 5 mm Parallel fence tiltable: 0° - 45° Thicknesser table length: 540 mm Thicknesser width: 306 mm Thicknessing height: 4 - 220 mm Power feed switchable: 6 m/min Preparation for slot mortising unit With mobility kit and steering bar Machine CE compliant, GS tested Technical documentation available as PDF file Transport dimensions approx. 2,600 x 2,120 x 1,300 mm (L x W x H) Weight approx. 900 kg To avoid misunderstandings, on-site inspection by appointment is possible and recommended. Sale is conducted “as is”. Technical specifications, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, no guarantee. Subject to prior sale. No warranty shall be provided for used machines; sold as inspected. Terms of payment: Prices plus statutory VAT, payment before collection or dispatch. Delivery terms: ex stock.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, jam operasional: 900 h, Fungsionalitas: berfungsi sepenuhnya, Like-new AL-KO POWER UNIT 300P Dust Extraction Filter, 2019 Purchased just before the COVID-19 pandemic for use as a dust extraction system for a CNC machine. Very little use, less than 900 operating hours. The Biesse Rover CNC router is also available for sale in a separate listing. Buyer is responsible for removal and transport of the equipment. The AL-KO Power Unit is a high-efficiency enclosed filter system equipped with a clean-side fan. The unit complies with filtration class H3 requirements: the return air dust concentration is less than 0.1 mg/m³. The equipment is delivered fully assembled for quick and easy installation and commissioning. Dust is collected in containers located beneath the filter, allowing for easy disposal directly from under the machine. The filtered air can be returned to the workshop area or exhausted outside via a separate duct system. Its enclosed construction ensures quiet operation and a dust-free environment around the device. The return air dust concentration is only one tenth compared to conventional bag extraction systems! Filter cleaning is automatic via compressed-air pulses or mechanically with shaker devices. The automatic cleaning is controlled by a vacuum sensor. Post-cleaning is performed when the unit is switched off. The filter material is Class C and antistatic. Filter bag replacement is easy, thanks to a filter roof that opens effortlessly. With the fan mounted on the clean side of the filter, the unit offers advantages over traditional systems in fire safety, noise levels, and maintenance-free operation. Pre-separation of coarse dust reduces filter material wear and lowers filter load, ensuring maximum filtration efficiency. The Power Unit series offers extremely low noise levels, down to just 69 dB! In addition to wood, AL-KO dust extraction units are suitable for other machinable materials such as plastics, stone, cement, gypsum, and aluminum. POWER UNIT 300P - Suction inlet D 300 mm, max. airflow 6,000 m³/h - Power 7.5 kW – filter area 30 m², collection containers 3 × 250 l Chjdpfx Aaoxz Rg Ijrof - Includes compressed-air filter cleaning - Includes automatic fire extinguishing system

Kondisi: bekas, Mesin milling ujung. Alat yang sederhana dan sangat praktis dalam produksi jendela. Cocok untuk milling profil jendela PVC dan ALU. Cedpfxsxminhs Aarshf

Kondisi: bekas, nomor mesin/kendaraan: 007134, Tipe tepi yang diaplikasikan: tepi tipis, tepi tebal, kayu solid Cjdpfx Aaot Hmtzorohf Sistem lem: EVA, udara panas Penyambungan milling: ya Unit multifungsi: ya Unit router atas: ya Kecepatan makan maksimum: 25 m/menit Ketebalan papan maksimal: 60 mm Unit kerja: 10 unit

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, balestrini-cp90-4-hu Chedpfxsx A Hato Aarjf

Kondisi: sangat baik (bekas), 4M/65E_lathe_vg Chjdpfjxz Tfaex Aarsf

Kondisi: baru, Tahun pembuatan: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft operations. The F 5 ensures edge processing at every step, as it comes equipped with all the components required for your application: jointing cutter, end trimming saw, milling unit, radius scraper, corner rounding unit, surface scraper, and buffing station. For even more flexibility towards a perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Features: Hebrock F5 Next – 10 m/min F5 Next Edge Banding Machine With PLC control (including touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (including DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change pre-installation including glue discharge device, HF end trimming unit (approx. 12000 rpm), HF milling unit (approx. 12000 rpm) with separate pneumatic height adjustment and interchangeable cutter block (combination design), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lift), buffing station, robust chain feed, double roller upper pressure with ball bearings, viewing window on machine rear, extendable workpiece support, feed speed approx. 10 m/min. F5/08/4 Quick-change unit corner rounding F5/08/5 Additional interchangeable motor corner rounding unit with tool setup F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spray unit separating agent F5/24/2 Spray unit cleaning agent F5/25 Spray unit edge F5/27 Nesting for milling and radius scraper F5/30 Pneumatic three-point adjustment (radius-, bevel-, and flush trimming) Chjdpelht Hwjfx Aarsf Location: Ex-stock 54634 Bitburg - Available in calendar week 4 -

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, jam operasional: 900 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.600 mm, jarak lintasan sumbu Y: 1.500 mm, Near-new nesting CNC machining center Csdpfexz Rfqsx Aarehf 4-axis nesting CNC machining center, purchased new in 10/2019. Less than 900 hours of milling time. The business for which the machine was acquired ceased operations due to COVID-19, and as a result, the machine has seen very little use. It has been connected to an AL-KO extraction system, which is also available for sale in a separate listing. Table dimensions: 3600 x 1500 mm. The machine can be used as a nesting table router or the panel can be removed to utilize suction pods, allowing workpieces to be raised for machining. The machine is in fully operational condition in every respect and presents an excellent alternative to a new machine. Automatic 10-position tool changer, two Busch vacuum pumps (rotary vane, 250 m3/h each). The worktable can be split into two separate work areas. Drilling unit for vertical and horizontal drilling. Grooving saw. Automatic tool height measurement (enables working with multiple tools for the same job without any noticeable height differences between tools). bSolid software included, Finnish language version. Compatible saw and planer aggregates are also for sale. The machining unit is equipped with collision sensors, making safety fencing unnecessary. The buyer is responsible for all costs related to transportation, machine relocation, and preparation for transport (this service can be arranged, for example, through the machine's importer).

Kondisi: baru, Tahun pembuatan: 2025, hebrock-f2-en Chjdpjlht Hzefx Aarsf

Kondisi: baru, Tahun pembuatan: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving, but also comes equipped with everything you need to process perfect edges right from the start: diamond-tipped pre-milling cutters ensure excellently prepared workpieces for edge banding. Standard features include a pre-milling unit (up to 2 mm milling depth), a top-mounted quick-heat glue pot, end trimming saw, and a combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 – 10 m/min Chedpfsi Am U Dox Aarof Edge banding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge materials up to 3 mm; pre-milling unit (incl. diamond tooling) up to 2 mm depth, maintenance-free glue pot with quick-change setup including glue drain device, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination version), robust chain feed, ball bearing double roller top pressure, viewing window at machine rear, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (for radius, bevel, or flush trimming)

Kondisi: baru, Tahun pembuatan: 2025, Hebrock F 4 Complete Processing of Your Panels For those who don’t want to do things by halves. With the F 4, we offer you a model that allows you to produce fully processed panel edges within a machine length of just 4 meters. The F 4 is not only space-saving but also extremely attractive in terms of price-performance ratio. Max. Edge thickness: 3 mm Min./Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm 10″ Touchscreen PLC control Top-mounted quick-heating glue pot (maintenance-free) Support plate for edge material Automatic centralized lubrication (cross-cut saw, corner rounding) Optical display for workpiece sequence Chsdpfx Aohqadcearof Extension arm (extendable to front) Quick-change glue basin incl. glue change unit for PUR processing Surface scraper with dual sensor Pneumatic end trimming (scissor-type, Hebrock system) Double roller upper pressure (ball bearing mounted) Transport chain with fixed-mount special chain plates Jointing cutter Milling unit Cross-cut saw Corner rounding unit Accessories: F4/09 Radius scraper (incl. pneumatic lift) F4/09/4 Multi-radius scraper (R1/R2) F4/30 Pneumatic 3-point adjustment Location: From stock 54634 Bitburg - available at short notice -