Beli Satu Butir Menabur Mesin bekas (76.860)

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20250107, panjang total: 2.000 mm, lebar total: 1.900 mm, tinggi total: 3.050 mm, berat keseluruhan: 1.000 kg, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, frekuensi input: 50 Hz, kapasitas pemanasan: 24 kW (32,63 hp), masa garansi: 12 bulan, berat muatan maksimum: 700 kg, berat benda kerja (maks.): 700 kg, diameter sangkar: 1.390 mm, Single-stage cleaning machine Operating principle, machine with lift door The cleaning machine’s tank is filled manually with tap water (optionally via the automatic refill valve AR-2) and is heated by heating elements and thermostat settings. The time settings for the phases—washing, dripping (optionally drying and steam extraction)—are adjusted via the "PROCESS TIMER." Parts are placed on the loading grid or loading trolley and pushed into the cleaning chamber. For heavy loads, a conveyor belt (MIU / AIU) can optionally be installed to transport the items into the cleaning cabin. The lift door is closed, the machine started, and the wash pump delivers the cleaning solution onto the objects to be cleaned via the rotating spray systems. The rotation of the upper and lower spray arms is powered by the reaction force of the jet nozzle located at one end of the spray arm. The rotational speed can be adjusted using a screw in the reaction nozzle. Optionally, the rotation of the upper spray arm can be motorized and the spray arms can be fitted with nozzles. Kjdpfsvvuzcsx Ac Holn After the wash cycle, a brief dripping phase follows, during which the used cleaning solution is returned through filter baskets to the wash tank. Optionally, the fluid from the wash stage can be filtered using a filter unit (EFG-6 or PP197). An additional stage, such as pre-washing or rinsing, is optionally possible via stationary spray pipes NS-2 / NS-TEMP. In this case, parts are rinsed with fresh water (cold or heated), which flows into the drain through the drain valve. After the cleaning process, the parts can optionally be dried using a drying unit. When the cleaning process is complete, the lift door is left ajar for steam extraction. The steam from the cleaning cabin is either extracted using the steam extractor (DF-250S) or can be condensed and returned to the tank using the steam condenser (FX6002). Both accessories are optional and are not part of the machine’s standard equipment. Once the steam extraction time has elapsed, the lift door opens fully and the cleaning cycle is complete. Optionally, the lift door can be equipped with a safety edge, which automatically stops the door if an object is detected in the doorway. The cleaned components can be removed from the cleaning chamber onto a loading surface or loading trolley.

Kondisi: bekas, 1 Ksdpfoyath Tsx Ac Holn

Kondisi: bekas, Single-column Eccentric Press RASTER ZEULENRODA Type PDA 100 Kedpfjx U Eiajx Ac Holn Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram surface: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height with maximum stroke (ram TDC): max. 469 mm Installation height with maximum stroke (ram BDC): max. 387 mm Stroke rate: 50 – 200 strokes/minute Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multi-plate wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with crawl speed for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram counterbalance - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Centralized grease lubrication - Operating manual and documentation for the press Included: Roller feeder MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roll diameter: 63 mm Strip feed speed: 40 m/min - Adjacent feeder control MABU Space requirement eccentric press (L x W x H): 270 x 240 x 350 cm Weight of press: 13.5 tons.

Kondisi: baik (bekas), Tahun pembuatan: 1992, Single-piece sanding machine Top and bottom sanding Electric height adjustment with digital display Continuously adjustable feed speed Star-delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finish brush unit, top and bottom, manual height adjustment Working width: 190 mm Working height: 4 – 150 mm Min. workpiece length: approx. 280 mm Sanding belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 – 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Including infeed and outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Specifications are subject to errors and prior sale. • Stated prices are ex-works, loaded free of charge. • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty whatsoever. Buyers are welcome to inspect the machines on site. Kodpjwyda Uefx Ac Hjln • Special agreements are only valid in written form. (We only respond to inquiries that include your address and phone number!)

Tahun pembuatan: 2025, Kondisi: baru, de Ksdpfopl Tgmsx Ac Holn

Kondisi: bekas, nomor mesin/kendaraan: 008367, typ_der_angebracht_kante_2024-06-22_001 Kedpfx Acjx Swfho Hjln

Kondisi: bekas, nomor mesin/kendaraan: 008244, de20240622-01 Kedpfxsx Swgfs Ac Hsln

Kondisi: bekas, nomor mesin/kendaraan: 008350, de.1 Kodpfxsx A Tgye Ac Hsln

Kondisi: bekas, Einständer - Exzenterpresse AMBOLD Typ PEEV 25.2 Kljdpfxjtx E N Te Ac Hen

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 1.100 kg, diameter rotor: 170 mm, jumlah bilah: 13, panjang total: 1.476 mm, tinggi total: 1.886 mm, lebar total: 1.009 mm, panjang rotor: 400 mm, jenis arus masuk: tiga fasa, kecepatan rotasi (maks.): 80 rpm, perforasi ayakan: 12 mm, masa garansi: 12 bulan, We are a company with over 30 years of experience in trading machines for the plastics industry. Klodpfxeyanf Hj Ac Hen All offered machines are available in our inventory, and we can carry out test runs on your material. The GCV series machine is a modern unit that combines the functions of preliminary shredding and final granulation of plastics. This enables various types of plastics—and more—to be processed in a single operation. The upper section of the machine is responsible for pre-shredding—the material is fed onto rotating knives that precisely cut it. Additionally, a special feeding system ensures efficient material delivery into the machine. The lower part is the grinding chamber, where the rotor design and feeding method can be adapted depending on the material type, its properties, and the required throughput and final granulate size. Importantly, after the process is complete, the material does not require any additional transportation between devices. The machine features a compact design, saving space and offering an excellent price-to-performance ratio. Crusher specifications: Crusher motor power: 11 kW Rotor knives: 13 + 2 Fixed knives: 4 Mill specifications: Mill motor power: 7.5 kW Rotor knives: 6 Fixed knives: 2 Weight: 1,110 kg Crushing chamber size: 400 × 550 mm If you are interested in GENOX machines from countries such as the UK, Germany, Portugal, Hungary, Spain, Russia, France, or Turkey, please contact the GENOX dealer directly in your country. If you are from another country, please contact us and we will assist you in selecting a suitable machine and conducting test runs in Poland.

Tahun pembuatan: 1994, Kondisi: bekas, Dimensions: H = 1600 mm L = 1200 mm Kodpfelp Iibex Ac Heln D = 1100 mm

Kondisi: bekas, Tahun pembuatan: 1992, de-technische-daten-presse-1 Kledpexh Szaofx Ac Hjn

Kondisi: sangat baik (bekas), Single-sided edge banding machine (LEFT) Edge thickness, rolls (min/max) mm: 0.3 - 3 Edge thickness, solid strips (min/max) mm: 3 - 12 Panel thickness (min/max) mm: 8 - 60 Control: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Top pressure: V-belt driven Spraying unit (for liquid anti-adhesive) Jointing milling unit 08.376 (2 x 3 kW) Gluing station (hot melt adhesive) 283.1513 Klsdpfxsd Nuu Hj Ac Hen Edge pressure zone Edging magazine for rolls (number of compartments): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multifunctional unit (radius milling and profile milling) 08.342 (2 x 0.66 kW) servo Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Kondisi: sangat baik (bekas), FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGE BANDING LINE (Right) Comprising the following machines: Kodpfxsinigmo Ac Hsln M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "BARGSTEDT" Model PROFI TBR100/20/30/F M.02) SINGLE-SIDED EDGE BANDING MACHINE (RIGHT) "HOMAG" Model Profi KAR350/12/A Panel thickness (min/max) mm 8 / 60 – Working width (min/max) mm 200 / 1200 Control/Software PC 22 Feed speed (adjustable) m/min 18 – 32 Panel infeed system WZ 14/30 Jointing unit with CNC control (2 x 3 kW) DOUBLE gluing unit (PUR adhesive + premelter) 2 x PU 34 Pressure zone (CNC controlled) – Edge magazine for rolls (No. 12 positions) End trimming unit WK13 (BEVEL/STRAIGHT automatic adjustment) Pre-milling unit (2 x 0.55 kW) pneumatic adjustment Multi-profile milling unit (CNC controlled) MF 21 (2 x 0.55 kW) Profile milling unit (copying) FF 32 (4 x 0.4 kW) automatic changeover device Contour milling unit (for fine milling) CNC controlled FK 31 (30 m/min) recently added after technological overhaul Multi-profile scraper unit (CNC controlled) MN 21 (servo) Finishing unit (flat scraper + smoothing unit) FA 11 Universal milling unit for grooving/rabbetting and profiling UF 11 (1 x 4 kW) M.03) FEEDING AND STACKING SYSTEM "BARGSTEDT" Model TFU200/L/30/12/S

Kondisi: sangat baik (bekas), Single-sided edge banding machine (left) Roll material (edges) thickness (min/max) mm: 0.3 - 3 Edge thickness in strips / laths (min/max) mm: 1 Panel thickness (min/max) mm: 8 - 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Pressure beam: V-belt driven Spraying unit (for liquid release agent) Adjustable fence (CNC controlled) Jointing unit with CNC control 08.378 (2 x 4.5 kW) Workpiece edge heating lamps Gluing unit (hot melt glue + pre-melter) 04.1570 Spraying unit (for separating fluid) Edge pressure zone Edge magazine for rolls (compartment number): 16 End trimming unit 08.42/30/B (2 x 0.66 kW - Pneumatic 0° - 25°) 30 m/min Multi-profile milling unit (CNC controlled) 08.0587 (2 x 1 kW) Spraying unit (for sliding fluid) Contour milling unit (for fine trimming) CNC controlled KFA 30 (08.355 - 1 x 0.5 kW) 30 m/min Form copy milling unit 08.604 (4 x 0.25 kW) brush Multi-profile scraper unit (CNC controlled) 08.516 Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617 - 4 (4 x 0.18 kW) Kodjm Udfwopfx Ac Heln Smoothing unit 08.53

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Edge thickness in strips (min/max) mm 0.8 / 20 Panel thickness (min/max) mm 8 / 60 Control unit: ICOS Open Compact Feed speed m/min (adjustable) 6 - 30 Top pressure: V-belt driven Adjustable fence, CNC-controlled Jointing unit with CNC-controlled 08.376 (Kw 4.5 x 2) Klsdpjidqphefx Ac Hon Lamps to heat the sides of the workpieces Gluing station (hot melt + pre-melter) 283.1513 + 283.201 Edge pressure zone Edge magazine for rolls (compartment No.) 1 End trimming unit 08.42 (Kw 0.66 x 2) max 30 m/min, 0°-25° Milling unit 08.055 (Kw 1.85 x 2) 0°-30° Sprayer unit (for sliding liquid) Contour trimming unit (for fine trimming), CNC-controlled 08.348 (KW 0.66 x 2), 4 profiles Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.50 Sprayer unit (for polishing fluid) Buffing unit 08.612-2 (Kw 0.25 x 2) Universal milling unit for grooving/rabbetting and profiling 08.183 (Kw 3 x 1)

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING AND FORMATTING MACHINE (LEFT) "SOFTFORMING" Edge material (rolls) thickness (min/max) mm: 0.4 / 3 Panel thickness (min/max) mm: 8 / 60 Control / Software: PC 22 / WoodCommander Feed speed (adjustable) m/min: 10 - 40 Side adjustment, aggregate carrier manual mm: 30 - 80 FORMATTING UNITS: Spraying device (for liquid anti-adhesive) Double jointing cutter unit KD 10 (2 x kW 6.6) Milling unit for softforming (2 x kW 1.85) 0°-20° Belt sanding unit for straight edge KS 10 (mm 120 x 2100) Free space (mm 700) EDGE BANDING SECTION: Klodpfxot N H Tao Ac Hjn Gluing unit (hot melt glue + pre-melter) E34 softforming Pressure roller conveyor G (revolver with 4 positions) for straight and shaped (softforming) edges with over/under trimming knives (in-lay) Edge magazine for rolls E3 (compartment no. 6) End trimming unit HL 84 (2 x kW 0.8) 0°-30° (max 25 m/min) 1st milling unit (2 x kW 0.55) 0°-30° (pneumatic adjustment) 2nd milling unit (2 x kW 0.55) 0°-30° (pneumatic adjustment) Universal milling unit for grooving, rebating, and profiling UF11 (1 x kW 4) 0°-90° Profile scraping unit PN20 (pneumatic) Finishing unit (flat scraper + smoothing unit) FA11

Kondisi: sangat baik (bekas), EN: FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGEBANDING AND FORMATTING LINE Consisting of the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDED (RIGHT) FORMATTING AND EDGEBANDING MACHINE "IMA" Novimat I/R75/690/R3 Panel thickness (min/max) mm 8 / 60 – Working width (min/max) mm 200 / 1300 Roll material (edges) thickness (min/max) mm 0.3 / 3 Control / Software: ICOS Open (Batch Size One) Feed speed (adjustable) m/min 6 – 30 Fully automatic panel infeed system in format processing A1 / 15 No. 2 Jointing cutters with CNC-controlled 08.378 (4 motors x kW 4.5) Glue application unit (hot melt glue + pre-melter) VTG + 283.205 Edge magazine for rolls (No. 24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x kW 0.2) 0°-25° Pre-milling unit 08.055.0.1680 (1 x kW 0.85) Multiple profile milling unit (CNC-controlled) 08.0587 HS/LS1 (2 x kW 1) Contour milling unit (for fine trimming) CNC-controlled KFA x20 (1 x kW 0.5) 20 m/min Multiple profile scraper unit (CNC-controlled) 08.516 HS/LS1 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x kW 0.18) No. 3 Universal milling units for grooving/rabbetting and profiling 08.190 (3 x kW 4.5) CNC-controlled – 90°/180°/270° M.03) LOADING AND STACKING SYSTEM "SIRIO" FR: LIGNE FLEXIBLE DE PRODUCTION PAR LOT-1 ET D'ENCOLLAGE/USINAGE DE CHANTS UNILATÉRALE Composée des machines suivantes : M.01) TABLE D'ALIMENTATION ET SYSTÈME AUTOMATIQUE DE RETOUR DES PIÈCES "SIRIO" BATCH SIZE ONE M.02) ENCOLLEUSE/USINEUSE DE CHANT UNILATÉRALE (droite) "IMA" Novimat I/R75/690/R3 Épaisseur panneau (min/max) mm 8 / 60 — Largeur de travail (min/max) mm 200 / 1300 Matériel rouleau (chants) épaisseur (min/max) mm 0,3 / 3 Commande / logiciel : ICOS Open (Batch Size One) Vitesse d'avance (réglable) m/min 6 – 30 Système d'introduction automatique de panneaux en mode format A1 / 15 N° 2 agrégats d'affleurage avec CN 08.378 (4 moteurs x kW 4,5) Kljdpfokt Uuajx Ac Hen Unité d'encollage (colle hot-melt + prémélangeur) VTG + 283.205 Magasin pour chants en rouleau (N° 24 positions) Unité de coupe-anglet terminale 08.42 / 30 / B / LS1 (2 x kW 0,2) 0°-25° Unité de pré-fraisage 08.055.0.1680 (1 x kW 0,85) Agrégat multifraise profil (CN) 08.0587 HS/LS1 (2 x kW 1) Unité de fraisage de contour (pour finition) CN KFA x20 (1 x kW 0,5) 20 m/min Agrégat racloir multi-profil (CN) 08.516 HS/LS1 Agrégat à racloir plat 08.521 Unité de polissage 08.617-2 (2 x kW 0,18) N° 3 agrégats universels pour rainurage, feuillurage et usinage de profil 08.190 (3 x kW 4,5) CN — 90°/180°/270° M.03) SYSTÈME D'ALIMENTATION ET DE GERBAGE "SIRIO"

Kondisi: bekas, nomor mesin/kendaraan: 008019, Jenis tepi yang dipasang: tepi tipis, tepi tebal Sistem lem: EVA Kjdpfewvq E Nox Ac Hsln Penyambungan milling: ya Unit multifungsi: ya Unit milling atas: ya Kecepatan umpan maks.: 40 m/menit Ketebalan panel maksimum: 60 mm

Kondisi: baru, Pressure: 150 Slide adjustment: (automatic adjustment) 40 mm Stroke length (max.): 10-125 mm Total power requirement: 15 kW Approx. weight: 9500 kg Dimensions (LxWxH): 1800 x 1500 x 2600 mm Strokes per minute: 50-90 Machine and equipment in accordance with CE regulations Light sensors: SICK or PILZ PLC control: Siemens S7-1200* Stroke adjustment: directly via the control panel Balancing system: integrated Speed adjustment: via Mitsubishi frequency inverter Machine frame: full steel construction Guide: internal and external eccentric guidance Crankshaft: made of hardened steel 4140 Clutch & brake: pneumatic combination Safety valve: two-way system Safety control (Safety PLC): SICK or PILZ Operation: two-hand as well as foot pedal operation possible Lubrication: automatic lubrication system Klsdpjtqwtdefx Ac Hsn Overload protection: hydraulic Safety device: safety enclosure for the working area External connections: 8-pin I/O at the PLC (for signal exchange & expansions) Vibration damping: rubber mats under machine feet (1 set – 4 pieces) Voltage/Frequency: 400 V / 50 Hz Fuse: 32 A required Standards: machine and equipment according to CE directives Control unit: 19-inch Siemens touchscreen Technical data: - Operation: jog mode / single stroke / continuous stroke - Pressing force: 150 t - Table size: 750 x 1000 mm (fixed table) - Stroke length: 10-125 mm, automatic stroke length adjustment via PLC - Ram plate: 500 x 800 mm (Ø 55 mm pin reception & T-slots as per customer specifications) - Strokes: 50 – 90 /min - Motor: 15 kW (1400 rpm) - Throat depth: 325 mm - Installation height: 475 mm to 295 mm - Pin hole in ram: 50 mm - Length: 1,800 mm - Width: 1,500 mm - Height: 2,600 mm - Weight approx.: 9,500 kg - Slide adjustment: 40 mm (automatic adjustment)

Kondisi: bekas, nomor mesin/kendaraan: 006710, Jenis tepi yang diaplikasikan: tepi tipis, tepi tebal, kayu solid, veneer Sistem lem: EVA, udara panas Profil joining: ya Unit multifungsi: ya Klsdpfeqy Em Tex Ac Hen Kecepatan umpan maksimum: 11 m/menit

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Single-sided tenoning machine. Equipped with an end-trimming saw and a vertical milling cutter. Sliding table mounted on guides. Heavy cast iron construction ensures stability. The cutter heads can be set at an angle. The machine features a pneumatic clamping gate. Manual feed. Kedevfv A Hjpfx Ac Hjln

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Ref: 11023. 2016 FKS Printbind KB-4000 PUR. Mesin penjilid PUR dengan satu penjepit dan sistem nozzle, dirancang untuk meminimalisir limbah lem. Dilengkapi dengan: - Layar sentuh - Penghitung batch Ksdpfx Aoxu Np Uec Heln - Sistem aplikasi lem nozzle slot PUR - Lem samping EVA hotmelt - Unit penjepit awal otomatis - Milling, notching, dan micro-notching Spesifikasi: Ukuran buku minimum: 140 mm (T) x 140 mm (L) Ukuran buku maksimum: 380 mm (T) x 290 mm (L) Tebal buku min / maks: 1 mm – 40 mm Kecepatan maksimum: 120 buku / jam.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Schiatti Angelo FPS15 single-sided straight-line edging machine with arris 4x surface spindles (2x diamond, 2x polisher) 4x arris spindles (2x diamond, 2x polisher) - Glass thickness: 3–20 mm - Minimum dimensions: 150 x 150 mm - Maximum load capacity: 1,000 kg - Working height: 765 mm - Heavy-duty, long-lasting conveyor belt guided by ball bearings Klsdpfx Aswd Eydoc Hen - Springs for automatic thickness adjustment - Wastewater collection tray - 2 meters infeed and outfeed - Total length: 6,977 mm

Tahun pembuatan: 2021, Kondisi: baru, Ein-Kopf-Sägeautomat OMC GIOBI 600, neu Maschine auf Lager - Sägeblatt-Ø 600 mm - Hydro-pneumatischer Vorschub - Beidseitige pneumatische Neigung, mit festen Gradstellungen bei 22,5° – 45° – 90°. Zwischengrade mit manueller, mechanischer Arretierung - 2 vertikale und 2 horizontale Spannzylinder - Sprühnebel-Sägeblattkühlsystem - Vollständige pneumatische Schutzverkleidung Klsdpfx Acjhrumaj Hsn