Beli Scm Cyflex bekas (586)

Kondisi: bekas, Tahun pembuatan: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA": TOP-LEVEL QUALITY AND PRODUCTIVITY SOFTWARE XILOG MAESTRO: EXTREMELY SIMPLE PROGRAMMING MATIC WORKTABLE: ONE POSITIONING FOR MULTIPLE OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (reference side) mm 3,680 Working area Y-axis (max. loadable workpiece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length in pendulum operation mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air velocity m/s 25 Extraction port diameter mm 250 GENERAL FEATURES CNC-controlled drilling and milling center in gantry design with workpiece support table, suitable for performing: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Grooving with disc cutter - General milling operations 3-4-5 axes MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced by welded reinforcements across the entire machine bed, ensuring extreme stability. The specially designed table form, with a broad base, is key to guaranteeing lasting precision and stability. The machine layout allows the operator an optimal workflow while keeping space requirements to a minimum. The mobile gantry carrier is constructed from a solid monoblock. It is positioned in the X-direction on prismatically ground guides with recirculating ball carriages. The machining unit on this mobile aggregate carrier is also guided on prismatically ground guides and recirculating ball carriages AXIS TRAVEL All axes move on large-section linear prism guides and recirculating ball shoes with a large support surface, ensuring optimal sliding even at maximum speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved by helical rack and pinion. Large-section recirculating ball screws ensure precise positioning of the working unit along the mobile gantry (Y- and Z-axes). MOTORS, DRIVES AND INVERTERS The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, dimensioned to allow speeds of up to 90 m/min while maintaining the best finishing quality CONTROL The control unit consists of a numerical controller for milling and drilling machines with the "Xilog Maestro" graphical user interface running on: - Office operating system Windows 7 - 17” color LCD screen - QWERTY keyboard - Swiveling control panel - Machine operation interface with Xilog Maestro software Xilog Maestro Features Programming - Parametric graphical programming - Import of DXF files (2D; geometries "SPLINE", "POLYLINE 3D", line or circle interpolation in three axes, linear in space, spiral interpolation in the selected plane) - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Capability for panel zero-point shifting to execute drilling on inclined or curved panel edges Fodpfxsxnldbo Aagofw

Kondisi: sangat baik (bekas), NOMOR KATALOG 7479 Data teknis: - lebar poros: 410 mm - poros 4 pisau (TERSA) - sisir peredam suara - pelindung poros - panjang meja: 2610 mm - meja masuk lebih panjang: 1435 mm - meja dari besi cor - kedua meja dapat diatur - rel pandu asli dari besi cor, dapat diatur sudutnya - rem - diameter sambungan ekstraksi: 115 mm - motor: 4 kW - dimensi (p/l/t): 2610 x 960 x 1110 mm - berat: 578 kg KEUNGGULAN – Produk buatan Italia – Poros 4 pisau – Rem – Sisir peredam suara – Meja masuk lebih panjang – Tidak dicat ulang – Serut kayu bekas, kondisi sangat baik, dokumentasi asli DTR Harga netto: 21.900 PLN Fedpfx Ajyit Apoagsfw Harga netto: 5.200 EUR (berdasarkan kurs 4,2 EUR) (Harga dapat berubah jika terjadi fluktuasi besar)

Tahun pembuatan: 1994, Kondisi: sangat baik (bekas), 29 spindles maximum workpiece width: 168 mm left/right spindles spindle spacing: 32 mm electrical adjustment of the aggregate angle 4 pneumatic clamps pneumatic feed of the drilling head power supply: 380V Ffedpfx Aajiclfbegow

Kondisi: bekas, Tahun pembuatan: 2009, lebar total: 1.800 mm, tinggi total: 1.650 mm, Empty weight: 2,400 kg Dimensions (L x W x H): 350 x 180 x 165 cm Motor Configuration: Ffsdpfxownh Irs Aagjw Bottom, 5.5 kW Right, 5.5 kW Left, 5.5 kW Top, 7.5 kW Bottom, no motor, but optional spindle - Year of manufacture: 2009 - Documentation available: Yes - CE certificate available: No - Serial number: AA2/001125 - Number of spindles [pcs]: 4 - Spindle 1: - Spindle diameter [mm]: 40 - Spindle 2: - Spindle diameter [mm]: 40 - Spindle 3: - Spindle diameter [mm]: 40 - Spindle 4: - Spindle diameter [mm]: 40 - Min. planing width [mm]: 25 - Max. planing width [mm]: 240 - Min. planing height [mm]: 6 - Max. planing height [mm]: 120 - Infeed table length [mm]: 2000 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 2.2 - Extraction port diameter [mm]: 120 - Voltage [V]: 400 - Power consumption [A]: 58 - Fuse [A]: 63 - Transport dimensions: 3500mm x 1800mm x 1650mm (l x w x h) - Transport weight [kg]: 2400kg - Transport packages [pcs]: 1 Financial information VAT: The stated price is plus VAT VAT/margin scheme: VAT deductible for business customers Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Kondisi: sangat baik (bekas), Table length 300 cm Ground clearance 105 cm Fedpfx Aaommci Uegefw Undercutter 5.5 kW motor

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Wide belt sander SCM Sandya 3 Working width: 950 mm Number of sanding units: 2: - 1 unit with steel roller - 2nd unit combination – rubber roller + pad Pad with automatic pneumatic adjustment Oscillation controlled by photocells 2 speeds for the conveyor belt Feed rate: 4.5 / 9 m/min Motor power: 7.5 kW Abrasive belt dimensions: 1900×970 mm Fodpfx Aaoyiacgsgefw

Kondisi: bekas, SCM Sintex NTE Mesin Ketam Empat Sisi Mesin ketam dan frais profil otomatis elektronik empat sisi Lebar pengetaman: 180 mm Tinggi pengetaman: 105 mm Ffodpfxjyi Eaae Aagjw 4 spindle Motor spindle 1 + 4: 7,5 kW Motor spindle 2 + 3: 7,5 kW Diameter spindle: 35 mm Meja pemasukan panjang sekitar 2300 mm Kecepatan putar spindle: 6000 rpm Kecepatan pengumpanan: 6/12 m/menit Penyesuaian tinggi dan lebar elektrik Pompa pelumas Termasuk alat ketam Mesin telah DICEK DI BENGKEL dalam KONDISI SANGAT BAIK dari stok Lieboch / OPSI LEASING TERSEDIA

Kondisi: bekas, SCM T 130 LL mesin frais meja berat desain LL – meja panjang dengan penyangga bingkai yang dapat ditarik motor 7,5 kW 5 kecepatan 3000–10000 rpm penyesuaian poros otomatis naik–turun panel kontrol di atas pembatas frais dengan pengaturan halus TANPA alat pengumpan otomatis Mesin berfungsi dan dalam KONDISI BAIK Tersedia dari stok Lieboch Fsdpeyi D Hlefx Aagofw

Kondisi: bekas, Gergaji format presisi berat SCM SI 550 E Class Versi: Pertukangan Kayu - Pertukangan Meubel Panjang potong: 3200 mm Lebar potong: sekitar 1500 mm Motor utama: 11 kW 3 kecepatan: 2500/3000/4200 rpm Fjdpfxeyi Duio Aagofw Pembatas sudut dengan kompensasi panjang Mata gergaji hingga diameter 550 mm Pengangkatan dan pemiringan mata gergaji elektrik dengan tampilan digital Mesin dari pensiunan / Pengiriman pertama 2011 Mesin DICEK WORKSHOP dalam KONDISI TERBAIK Stok tersedia di Lieboch

Kondisi: bekas, Tahun pembuatan: 2007, Working area: 2780 x 1140 mm (vertical milling), 2500 x 950 mm (horizontal drilling). Travel path X-Y: 2980 x 1271 mm. Z-axis travel length: 200 mm. Clearance height: 180 mm. Fjdpfxex Twdye Aagjfw The machine base is a monolithic construction made from thick-walled steel, reinforced throughout the machine bed with welded-in triangular plates for exceptional stability. The triangular design, particularly with a broad base for load-bearing components, is key to ensuring long-term precision and rigidity. The machine layout allows users optimal workflow with minimal space requirements. This chassis design provides the machining unit with a balanced and secure foundation, enabling outstanding load distribution. The mobile aggregate carrier is constructed as a solid monoblock. It is positioned along the X-axis on precision-ground prism guides using recirculating ball carriages. The working unit, mounted on it, also travels on prism guides and recirculating ball carriages for robust performance. Description of aggregates and standard accessories Drilling unit: Drill head with 10 + 4 spindles: · 6 individually selectable vertical spindles in X · 4 individually selectable vertical spindles in Y · 2 horizontal spindles in X (1+1) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Pitch: 32 mm · Drill holder: M10 with 11 mm centering · Extraction nozzle: D = 160 mm Vertical milling unit (Position 2): · Tool holder: HSK 63F · Speed: 1,500 – 24,000 rpm, infinitely variable via inverter · Motor power: 4.4 kW (6 HP) at 12,000 rpm (S1) · Clockwise/anti-clockwise operation · Ceramic bearings · Included: 4 tool holders (right-hand), without collet Tool changer: · Lateral tool magazine, 7-fold (TR7), fully enclosed against chip contamination · 7 tool slots for HSK 63F tool holders, arranged in a row · Max. tool diameter: D=120 mm · Max. weight per tool holder: 4.5 kg · Max. total tool weight (TR7): 20 kg · Angle heads can be accommodated Horizontal milling unit (Position 1): Horizontal unit with two opposing outputs for milling and grooving. · Speed: 9,000 – 18,000 rpm, infinitely variable via inverter · 1 output for collets 3-20 mm (ER32) · 1 output for saw/collet 3-12 mm (ER20) (for saw blade D=120 mm / bore 50 mm) · Motor power: 3 kW (4 HP) · Max. front milling tool diameter: 20 mm · Max. front milling tool length: 110 mm · Max. rear milling tool diameter: 12 mm · Max. rear milling tool length: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER32): 50 mm · Saw blade arbor diameter (ER20): 12 mm Work table: The work table is designed to provide the operator with maximum freedom of movement. The vacuum quick-clamping system allows for highly flexible, precise positioning and optimal workpiece holding. · 4 supports, 900 mm, steplessly manually adjustable in X · 8 round vacuum cups, D = 110 mm, steplessly adjustable in Y (2 per support) · 2 stops in X (left/right) · 1 stop in Y per support (6 in total) · Retractable reference stops, CNC-controlled · Includes: 4 plug-in adapters for vacuum cups · Standard pendulum processing (2 working zones) Axis movement: The X, Y, and Z axes are driven via precision-ground recirculating ball screws of the highest accuracy. The X-axis ball screw is centrally located for maximum performance.

Kondisi: bekas, Tahun pembuatan: 2023, Exhibition Machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Model: GABBIANI P80 Year of manufacture: 2023 1.00 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm: 80 Working table height mm: 950 Number of standard clamps: 5 Number of clamps for versions 33/38/43: 9 / 10 / 10 Number of clamps for versions 33/38/43 with FlexCut 1 unit (single clamp with double fingers included): 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm: 3300x2100 Version 33 (Opt.) mm: 3300x3200 Version 38 mm: 3800x3200 Version 38 (Opt.) mm: 3800x3800 Version 43 mm: 4300x3200 Version 43 (Opt.) mm: 4300x4300 AXIS SPEEDS Variable saw carriage speed m/min: 6 – 60 Variable pusher speed ( ) m/min: 60 MAIN SAW BLADE Motor power (S6 -40%) - 50Hz (star-delta start) kW (HP): 7 (9) (11) Rotation speed – 50Hz rpm: 4650 Saw blade diameter mm: 340 Main saw blade shaft diameter mm: 80 SCORING SAW Motor power (S6 -40%) - 50Hz kW (HP): 1.5 (2) Rotation speed – 50Hz rpm: 5850 Scoring blade diameter mm: 200 Scoring saw spindle diameter mm: 80 INSTALLATION Installed power kW: 12÷15 Machine base voltage Euro voltage (400 V / 50 Hz) Compressed air requirement NL/min: 300 Required air pressure bar: 7 Extraction air requirement m³/h: 2440 Extraction air speed m/sec: 20 Extraction spigot diameter mm: 4x120 ( ) Note: For countries where EC standards apply, the forward feed speed of the pusher is limited to 25 m/min. GENERAL CHARACTERISTICSAutomatically controlled horizontal panel saw with PC/PLC control unit, for cutting panels of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame constructed as steel tube design - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal fence on the left sideSaw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring blade - Vertical lift of the saw blade on linear ball guides and shoes - Guide wheels made of hardened and ground steel - Balanced mass distribution for best cutting quality - Direction of travel against the longitudinal fence - Saw carriage drive via rack and pinion - Carriage runs on cylindrical guides - Cylindrical guides made of hardened and ground steel (5 years warranty), protected by special dust wipers - Pneumatic switch for fast and safe change of main saw blade and scoring bladePressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to avoid collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam for cleaning the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Slides on linear ball guides and shoes.* Travel: 1200 mm* Minimum working width: 60 mm* Maximum working width: 1200 mmPositioning pusher and rear section of the machine - Positioning pusher over the entire length with motor drive via a robust shaft. Positioning pusher... Fsdpfx Asx Twcvjagjfw

Kondisi: bekas, Tahun pembuatan: 2006, en Ffodox Twccepfx Aagow

Kondisi: sangat baik (bekas), Mesin Pengamplasan Pita Lebar SCM Sandya 30 RT Lebar kerja: 1100 mm Tinggi kerja: 3-160 mm Jumlah agregat: 2 Roll kalibrasi Unit dengan sepatu sektional Daya motor: 1. 15 kW Ffodpfx Aaeyh N Icjgew 2. 11 kW Osilasi optik Panjang belt amplas: 2620x1115 mm

Kondisi: bekas, Tahun pembuatan: 2001, Type Record 121 Anzahl der gesteuerten Achsen: 3+ Nutzarbeitsbereich X-Y-Z: 2600-1080-250 mm Tischabmessungen: 2600 x 1080 mm Spindeldrehzahl: 900 - 18.000 U/min Anzahl der Frässpindeln: 1 Ffjdpfx Ajv Dtibeagow Werkzeugwechselplätze: 12 Werkzeugspannsystem: HSK63F Arbeitstisch: Matrix-Tisch Hauptmotorleistung: 7,5 kW Vakuumpumpenleistung: 250/300 m³/h Vakuummotor: 6,5 kW Absaugstutzendurchmesser: 150 mm Luftdruck: 7 bar Spannung: 380V/50Hz Transportabmessungen: 3700 x 3200 x 2600 mm Gewicht: 3.500 kg Preis: 15.500 €

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, PENGGUNAAN HARIAN DI PRODUKSI maksimal 2-3 jam, MESIN AKAN DIGANTIKAN DENGAN MESIN BARU YANG LEBIH BESAR MESIN TERSEDIA SEGERA. DATA TEKNIS TERTERA PADA FOTO Fedpfx Aoym Sgujagofw STASIUN KERJA: DATA TEKNIS: 1. Pemotong kiri+kanan 2. Aplikasi lem dengan rol 3. Gergaji depan dan belakang 4. Pemotong lurus, juga untuk laminasi solid 5. Pemotong sudut 6. Rondomat depan, belakang, atas, bawah 7. Pemotong baji lurus 8. Pemotong baji dengan radius 9. Pengering KAMI MENGIRIMKAN MESIN KE SELURUH DUNIA UNTUK PELANGGAN PANJANG MESIN +/- 7 METER BERAT : 3500 KG

Kondisi: hampir baru (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, lebar perataan: 630 mm, jumlah bilah: 4, jenis aktuasi: listrik, kecepatan rotasi (maks.): 4.500 rpm, lebar total: 1.200 mm, tinggi total: 1.100 mm, berat keseluruhan: 1.050 kg, lebar kerja: 630 mm, diameter spindel: 120 mm, lebar benda kerja (maks.): 630 mm, tinggi benda kerja (maks.): 300 mm, jenis penyesuaian ketinggian: listrik, jumlah rol pemakan: 2, tinggi penyerutan: 300 mm, tinggi kerja: 300 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, pl2hu_001 Fedpoxwd R Sofx Aagofw

Kondisi: sangat baik (bekas), 7713 TECHNICAL DATA - Max. workpiece width: 240 mm - Max. workpiece height: 130 mm - 6 spindles: 1) Bottom horizontal, 240 mm, 7.5 kW 2) Right vertical, 130 mm, 5.5 kW 3) Left vertical, 130 mm, 5.5 kW 4) Top horizontal, 240 mm, 7.5 kW 5) Top horizontal, 240 mm, 5.5 kW (spindles 4 and 5 electrically adjustable up/down) 6) Bottom horizontal, 240 mm, 5.5 kW - All spindles adjustable vertically and laterally - Spindle diameter: 40 mm *from above:* - 8 metal toothed feed rollers (in-feed), including 3 double rollers - 4 smooth rubber out-feed rollers, including 2 double rollers *from below:* - 3 smooth feed rollers - 3 side pressure rollers - Stepless feed speed adjustment via inverter - Pneumatically pressed rollers Fodpjyh N Ayofx Aagefw - Feed motor: 7.5 kW - Feed via Cardan shafts - Electrically adjustable planing thickness - Machine body lifting motor: 0.75 kW - In-feed table length: 2,480 mm - Pneumatic opening/closing of the safety cabin - Pneumatic table blow-off - Centralized table lubrication - Extraction port diameters: 3x120 mm, 3x150 mm - Dimensions (LxWxH): 5,300 x 1,700 x 1,800 mm - Weight: 5,000 kg ADVANTAGES – Italian-made – 6 heads – Suitable for wet and dry wood – Pneumatic cabin opening – Pneumatic table blow-off – Spindles 4 and 5 electrically adjustable – Used planer, in very good condition Net price: 126,900 PLN Net price: 30,200 EUR (based on an exchange rate of 4.2 PLN/EUR) (Prices may vary depending on fluctuations)

Kondisi: sangat baik (bekas), 6368 TECHNICAL DATA - maximum working width: 230 mm - maximum working height: 130 mm 7 spindles: 1) bottom horizontal 230 mm 5.5 kW 2) right vertical 130 mm 5.5 kW 3) left vertical 130 mm 5.5 kW 4) upper horizontal 230 mm 7.5 kW 5) upper horizontal 230 mm 11 kW 6) bottom horizontal 230 mm 18.5 kW 7) universal 230 mm, adjustable 360°, 5.5 kW - all spindles adjustable up/down, left/right - all spindles with electric brake - spindle diameter: 40 mm - spindles 4 and 5 with electric up/down adjustment - upper: 8 metal feed rollers, swiveling, including 2 double rollers - upper: 4 rubber outfeed rollers - upper: 2 hold-down pressures - lower: stops - lower side: 3 hold-down pressures - lower: 2 smooth metal feed rollers - lower: 2 double feed rollers, rubber coated - rollers pneumatically pressed - feed via cardan shafts - variable feed speed adjustment 5–36 m/min - feed motor: 4 kW - electric thickness adjustment: 0.75 kW - infeed table length: 1980 mm - fully enclosed in cabin - central table lubrication - extraction port diameters: 5x120 mm, 2x150 mm - dimensions (L x W x H): 5500 x 1840 x 1900 mm - weight approx. 5000 kg ADVANTAGES – Italian manufacture – 7-head configuration Fjdpfsyh N Agex Aagefw – suitable for wet and dry wood – universal last spindle – not repainted – used planer in very good condition Net price: 146,900 PLN Net price: 34,970 EUR (based on 4.2 EUR exchange rate) (Prices may vary depending on currency fluctuations)

Kondisi: bekas, Milling machine in good working condition Fsdpfxeuxlvmo Aagofw

Kondisi: baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, lebar perataan: 500 mm, Lebar kerja maks. 500 mm Poros pisau 4-mata Tinggi pengetaman maks. 235 mm Ffedpfxewv Tume Aagsw Kecepatan makan 7,5/15 m/menit Daya motor 5,5 kW Panjang meja 2200 mm Meja dapat dilipat

Kondisi: bekas, Tahun pembuatan: 2008, Mesin bekas Tahun pembuatan: 2008 Kondisi: saat ini masih berproduksi Perlengkapan dan data teknis: Perekat maksimal 8-55 mm Termasuk panel kontrol yang dapat diputar Unit penyambungan HF, 2 motor Termasuk bak pemanas cepat yang dapat diganti, berlapis teflon Termasuk posisi rol penekan secara elektronik Termasuk unit gergaji potong ganda yang dapat diputar Termasuk unit frais penyerut pinggiran Termasuk unit fase, radius, dan copy sudut yang dikontrol penggunaan dengan paket nesting Termasuk scraper radius dengan paket nesting Termasuk scraper permukaan Termasuk unit alur Ffodpfx Aasw Nadgsgjw Termasuk unit polisher Termasuk unit semprotan Ketersediaan: dalam waktu singkat Lokasi stok: Flörsheim

Kondisi: baik (bekas), Mesin planer tebal otomatis untuk bengkel pertukangan, pembuatan furnitur custom, kusen jendela kayu, pertukangan kayu, penggergajian, plastik, material komposit, dan berbagai aplikasi lainnya - Standar CE. Data teknis: Posisi meja elektronik Penyesuaian tekanan roller secara pneumatik Sistem penggerak dengan 3 roller atas bermotor diameter besar - Mudah diganti Pengaturan kecepatan makan elektronik 4/20 m/menit Dimensi meja kerja 630 x 1000 mm Lebar kerja maksimum 630 mm Tinggi kerja minimum/maksimum 3/300 mm Panjang kerja minimum 260 mm Jumlah pisau: 4 Motor utama 7,5 Hp Motor pengumpan 2 Hp Diameter saluran hisap 150 mm Ffodpfxeyi E T Ts Aagew Dimensi keseluruhan (mm): 1360 x 1080 x 1220 (tinggi) Berat: 1000 kg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, jam operasional: 120 h, Fungsionalitas: berfungsi sepenuhnya, tinggi penyerutan: 200 mm, diameter spindel: 50 mm, lebar perataan: 260 mm, panjang meja jointer: 2.500 mm, jumlah spindel: 5, Mesin frais profil otomatis Superset NT V5 versi bengkel kayu dengan 2 sumbu. Perlengkapan sesuai lampiran. Mesin terhubung dan siap demonstrasi. Ketersediaan: 1 hingga 2 minggu. Fsdpfxjym A A Hs Aagefw

Kondisi: bekas, Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, hentian panjang: 3.200 mm, diameter alat: 400 mm, diameter spindel: 50 mm, langkah spindel: 640 mm, kecepatan spindel (maks.): 3.000 rpm, panjang spindle milling: 320 mm, diameter mata gergaji: 400 mm, jenis penyesuaian ketinggian: listrik, jenis arus masuk: AC (pendingin udara), tinggi kerja: 130 mm, lebar kerja: 200 mm, SCM Windor 60/100 – Angle Processing Centre Manufacturer: SCM Group Year of manufacture: 2005* 1. General Description of the System The subject system is a window and door production line, type Windor 60/100 by SCM Group, year of manufacture 2005. This is a CNC-controlled angle processing centre for industrial machining of frame and sash components. The system is designed for series production and enables precise, repeatable processing in integrated process steps. 2. Main Components of the System 2.1 Angle Processing Centre SCM Windor 60/100 The SCM Windor 60/100 is of modular construction and designed as an angle machining unit. Machining is carried out on a tenoning side and a profiling side, arranged at right angles to each other. The system combines several machining steps such as milling, drilling, grooving, rebating, and tenoning in a continuous, CNC-controlled process. Key features: * CNC multi-sided machining * Several milling and machining spindles * Automated tool guidance and tool change * High dimensional and repeat accuracy 2.2 Fleximat Drilling Centre The Fleximat drilling centre is integrated into the production line and provides precise drilling operations for joints and fittings. Machining is CNC-controlled with vertical and horizontal drilling units. 2.3 Profiler Centre The profiler centre is designed for profile-forming milling operations and consists of two machining sides: Right side: * Lifting spindle with height adjustment * Suitable for variable profile and contour machining Left side: * 24-position tool changer * Automatic tool change to minimise setup times * Suitable for complex profile milling 2.4 Löwer Wide-Belt Sander Fodpfxsx Nqqxj Aagjfw A wide-belt sander from Löwer is integrated into the production line. The machine is solely used for surface sanding to improve the surface quality of the processed components. 3. Control, Operation, and Safety The system is equipped with CNC control, managing all machining operations, tool changes, as well as feed and spindle movements. Operation is semi-automated or fully automated by trained personnel. The safety equipment corresponds to the state of the art at the time of installation (year of manufacture 2005) and includes in particular: * Mechanical safety devices and enclosures * Emergency stop devices * Safety interlocks on moving machine parts 4. Optional Extension: SCM Topset XL Planer (10-spindle) To expand the existing machinery, the installation of an SCM Topset XL planer with 10 spindles is planned. The machine will be operated as an independent processing station at a separate location within the production hall and will not be integrated into the Windor system’s CNC control. The system is available and can be dismantled at any time. Dismantling and transport must be organised by the purchaser. Available from: 07/01/2026

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, Mesin serut kayu Diecke Ffjdpsymx U Esfx Aagsw