Mesin pengikat tepi

Scm Olimpic S215

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: AH/105752, kecepatan pemakanan sumbu X: 18 m/menit, tinggi benda kerja (maks.): 60 mm, jenis kontrol: Dikendalikan oleh PLC, RINCIAN TEKNIS Tinggi panel: 10–60 mm Knodpfx Aoxx Nf Deahef Kayu solid: 15 mm PVC/ABS: 3 mm Kecepatan feeding: 12–18 m/menit Tinggi kerja: dapat diatur melalui PLC DETAIL MESIN Kontrol: PLC PERLENGKAPAN Penopang panel yang dapat disesuaikan Rel rol samping dengan roda bebas untuk penopang panel Grup penyearah Pelat penahan rol Grup lem untuk lem EVA dengan pre-melter Grup penekan pinggiran Grup trimming Grup pemotong dengan motor tumpang tindih Unit miring (tiltable ear unit) Unit pembulatan dengan 4 motor Unit pengerok tepi Unit pengerok lem Grup sikat osilasi

Kondisi: baik (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, MCS Jigger high-temperature 143ºC. Type: COMBY-JIGGER JP70. Year of manufacture: 1982. Knsdefqmx Tepfx Aahsf Completely refurbished in 2002. Pressure: 3 kg/cm² Capacity: 9,170 l Roll width: 2,000 mm Fabric diameter: 1,100 mm Roller diameter: 324 mm Additives tank.

Kondisi: sangat baik (bekas), Single-sided edge banding machine (LEFT) Edge thickness, rolls (min/max) mm: 0.3 - 3 Edge thickness, solid strips (min/max) mm: 3 - 12 Panel thickness (min/max) mm: 8 - 60 Control: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Top pressure: V-belt driven Spraying unit (for liquid anti-adhesive) Jointing milling unit 08.376 (2 x 3 kW) Gluing station (hot melt adhesive) 283.1513 Edge pressure zone Edging magazine for rolls (number of compartments): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multifunctional unit (radius milling and profile milling) 08.342 (2 x 0.66 kW) servo Kjdpfx Aed Nuu Hoahjnf Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, masa garansi: 6 bulan, tegangan masuk: 400 V, Tersertifikasi DGUV hingga: 12/2026, tahun perombakan terakhir: 2025, panjang total: 700 mm, lebar total: 480 mm, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, diameter dalam: 450 mm, sekring listrik: 16 A, Mesin adonan dengan model Diosna: SP 24 D 2 pengatur waktu & 2 kecepatan Penutup debu tepung untuk adonan maksimum 24 kg Spiral mixer TOP hanya di tempat kami dengan pemeriksaan DGUV V3 Sambungan 400V, steker 16A-CEE Mesin bekas rekondisi dengan garansi Opsi: Kontrak perawatan Ksdsv Atryjpfx Aahsnf Paket layanan Layanan pengiriman Pelatihan & commissioning Temukan banyak spiral mixer TOP lainnya di tempat kami!

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing Knedpfx Aevvkfdoahof with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.

Kondisi: bekas, Working width 1350 mm Number of sanding units: 2 units Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH: 1350 mm - SANDING BELT LENGTH: 1370 X 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm - STEEL CALIBRATING ROLLER: 180 mm - Rubber-coated SANDING ROLLER: 180 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 14.7 kW - BELT SPEED: 18/16 m/s - FEED MOTOR POWER: 0.75 HP - Variable speed gearbox for feed belt, infinitely adjustable: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 DRUM BRAKE for belt stopping - Swiveling ROLLER for belt tensioning - 3 PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 ROLLER CONVEYORS with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED BELT - 1 EXTRACTION PORT, 160 mm Ø - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system 1. No valves 2. No photoelectric sensors 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system has operated continuously without lateral belt run-off! - Unitek calibrating roller made of steel (standard for all models) - Unitek flexible pressure pad before and after the roller (standard for all machines with 1 roller) - Unitek grit compensation with mechanical grid set, 6 positions (each – standard for all models) - Unitek electronic segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor with 18.4 kW instead of 14.7 kW (PER MOTOR) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in case of emergency stop (standard for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller conveyors with 4 rollers (standard for all models) - Price per roller conveyor - Unitek electronic machine control with 12'' touchscreen (standard for all models) Automatic workpiece detection with feed control ----- Machine price in above configuration on request! ----- Optional extras at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): EUR 8,390.00 Freight cost: EUR 1,300.00 Installation and commissioning: EUR 1,300.00 ----- All quoted prices are net prices plus statutory VAT of 19% Kjdpfsrmucxex Aahenf ----- (Technical data as per manufacturer – subject to change without notice!)

Kondisi: sangat baik (bekas), CNC MACHINING CENTER (POINT-TO-POINT) – 4 Axes (5 Axes with FLEX 5) Portal machine (mobile in X-axis) Control Powertouch (PC85), woodWOP software Work head safety enclosure Clamping table with K-Table model consoles Console support arms (qty) 8, Clamping table dimensions (mm) 1340 Automatic positioning of consoles (X-axis) LED indicators show the programmed position of vacuum cups (Y-axis) Workpiece clamp, Automatic tool change system – POWERCLAMP Knsdpfjw Dc Nijx Aahef Carousel tool changer – magazine positions (tool stations) 18 Max. working area (X-Y-Z) mm 4000 x 1550 x 60 Max. working area (X-Y-Z) in edge-banding mode mm 4000 x 1500 x 60 Work area – Vacuum pump (capacity in m³/h) 100/140 Chip conveyor With separate electrical and control cabinet Total connection load (52 A) WORKING UNITS (TOP): No. 17 Independent vertical drilling spindles (High Speed 7500) No. 4 Independent horizontal drilling spindles (2 on X-axis + 2 on Y-axis) Drilling head motor power (kW) 2.2 No. 1 Vertical main spindle (milling unit) HSK 63 (kW 15) Edge-banding unit Power Edge (Y-axis), edge-banding aggregate (hot-melt adhesive + pre-melter) Roll material (edge banding) thickness (min/max) mm 0.4 – 3 Edge band magazine for rolls (compartment position no. 1) Pre-trimming station (cutting unit) No. 1 Traverse unit (4 horizontal drilling spindles) No. 1 Circular saw unit (diameter mm 125) Combination unit (flush trimming – profile scraper knife)

Kondisi: bekas, Tahun pembuatan: 2002, Panjang mesin: 6240 mm Berat: 2400 kg Daya terhubung: 14 kW Diameter hisap: 120 / 140 mm Lokasi penyimpanan: Nattheim Kedpjvvkfwofx Aahjnf

Kondisi: bekas, Tahun pembuatan: 2012, Base machine Olimpic K 800 "T-ERL" (47), 1 pc STANDARD EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal support of work units Ksdpfxsxq Apgs Aahonf - Swiveling control console - Support roller conveyor with ball-bushing guides along entire machine length - Protective and noise-reduction hood with separate doors between gluing and finishing units - Extraction ports arranged on the noise reduction hood - Electrical system with lockable main switch - Emergency stop buttons at infeed and outfeed - Inverter for electric spindles PANEL FEED SYSTEM: - Feed chain with rubber sliding pads, featuring a high coefficient of friction, mounted on 1¼” industrial chain - The chain runs on 2 guides made of hardened and ground steel, one round and one flat, to ensure straight feed and prevent lateral deviation - Automatic central lubrication for the feed chain - The upper pressure beam is a thick-walled steel structure fitted with double rows of roller bearings and protective device for pressure rollers - Manual lifting of the pressure unit with automatic positioning of the working units when changing panel thickness - Mechanical digital display for monitoring selected panel thickness CONTROL “ORION 100” Control system with PLC, allowing fast, simple, and error-free execution of individual processing programs (max. 60 programs). Manages pneumatic positioning of units, if equipped on the machine. (The control system does not include pneumatic positioning.) - Alphanumeric keypad and display - Function keys for quick access to processing units - Operating temperature range from 0 to +45°C MAIN FUNCTIONS: - Control of work units and automatic activation of motors - Monitoring and adjustment of glue pot temperature - Selection between longitudinal and cross processing without program change - Simple, guided diagnostics for easy troubleshooting - Statistics on absolute data and individual processing: quantity, edge tape consumption, total chain feed distance - Measurement unit selectable in mm or inches Technical data OLIMPIC K800 T-ER L: Edge thickness: 0.4 to 8 mm Max edgebanding thickness, roll material: 3 mm Feed speed: 12/18 m/min Working height: 8 to 60 mm Max. dimensions of edge strip: 135 mm² Rotary table diameter: 780 mm Max. excess relative to panel thickness: 4 (2+2) mm Min. panel width (with minimal 210 mm length): 55 mm Min. panel length (with minimal 100 mm width): - with strip or roll edge max 3 mm: 140 mm - with solid wood edge: 200 mm Min. distance between consecutive panels at m/min 11 (16): 750 (850) Standard equipment: - Pre-milling unit at infeed RT-E - Edgebanding station VC-800 - End trimming unit KSEL - Flush trimming unit, tiltable RI/800 - Corner rounding unit ROUND K - Scraper unit RAS-V - ½ free space for flat scraper - 1 S free space for flat scraper, universal mill, or buffing unit - 1 F free space for blowing nozzle unit European safety regulations (CE marking) 1 pc Voltage 400 V EU 1 pc Frequency 50 Hz 1 pc "Autoset" for versions ER2, T-ERS, and T-ERL Enables all necessary adjustments during every job change, directly from the control console. Includes: - Time-controlled pressure unit - Pneumatic and independent swiveling of the end saw blades (front/rear) - Pneumatic remote adjustment for the flush trimming unit RI/800

Kondisi: bekas, Tahun pembuatan: 2019, Edge control, numerical control. Panel height min-max: 6 - 60 mm. PVC/ABS up to 3 mm. Minimum panel length/width: 140/60 mm. Feed speed up to 10 / 25 m/min, continuous. Working height electronically adjustable by CNC. Side roller track with return rollers for panel support. Rectifying unit with 2 motors. Coil holder plate. Glue unit for EVA/PUR glue, suitable for cartridge or granulate system. Edge pressure group for straight profiles with electronically adjustable pressure rollers (CNC). End cutting unit with 2 motors. Trimming unit with 2 tilt motors, electronically adjustable by CNC. Corner rounding unit with 4 multifunction motors (corner trimming + rounding), numerically controlled, automatic. Scraper unit with electronic control, CNC. Glue scraper group. Brushing unit. Machine length approx. 6500 mm. Weight approx. 2750 kg. Kjdpfowwhn Dox Aahsnf