Beli Si 550 bekas (9.118)

Kondisi: bekas, Tahun pembuatan: 2007, Gebhardt Roller Conveyor 600-610-550 RA1909 Merek: Gebhardt Lebar rol (RB): 550 mm, rol baja Lebar nominal/luar (NB): 610 mm Panjang: 6000 mm Tinggi rangka: 130 mm Diameter rol: 50 mm Jarak antar rol: 100 mm Motor: W30DT71D4/IS Daya: 0,37 kW Cakupan pengiriman: tanpa penyangga Opsional tersedia: Penyangga Pemandu samping Untuk konsultasi yang disesuaikan dan profesional, silakan hubungi kami. Anda dapat menghubungi kami melalui telepon atau email. Kami dengan senang hati akan membantu Anda dalam perencanaan dan pelaksanaan proyek Anda. Kami menantikan kabar dari Anda. Salam hormat, Tim Dr. Sonntag GmbH & Co. KG Spesialis dan kontak Anda untuk intralogistik Itjdpsk Abk Isfx Aa Neb

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor Left GKF 30°-750-550 IR900 RA1404 The Transnorm belt curve is in good used condition and fully operational. It is equipped with a SEW brand gear motor. Support stands are not included in the scope of delivery but are optionally available upon request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves impress with their performance and reliability. Thanks to a low-tension drive across the entire belt width, long service times are no problem. Conical rollers and a specially developed belt guiding system ensure the highest possible running smoothness. The pictures shown of the conveyor system were taken while still installed in a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length (center radius NL): 759 mm Ijdek Aa Unspfx Aa Netb Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet available as an option Conveying speed (v m/s): 0.03–1.05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11/0.55/S1 Belt: double-layer, green, smooth, KT36 Year of manufacture: 2001 Optionally available: - Support stands - Side guides Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg. For individual, professional consultation, simply get in touch with us. Contact us by phone or email. We will be happy to assist you in the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics.

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor GKF 1650-750-550 IR600 70° Right RA1441 The Transnorm belt curve is in good (used) condition and fully functional. It features a SEW brand geared motor. Support legs are not included in the scope of delivery, but are available as an option upon request. Belt curves are frequently used in intralogistics for the in-house transportation of unit loads and have become indispensable in modern distribution centers. Transnorm belt curves impress with their performance and reliability. Thanks to low-tension drive technology across the entire belt width, long operating times are no problem. Tapered rollers and a specially developed belt guiding system ensure maximum running smoothness. The images shown of the conveyor system were taken while still installed in a logistics center. Technical Data: Model Designation: Belt Curve Conveyor TS 1600-105 Conveying Length, Center Radius (NL): 1650 mm Frame Width (NB): 750 mm Belt Width (GuB): 550 mm Overall Height (BH): 210 mm Inner Radius (IR): 600 mm Conveying Angle: 70° Support Legs: optional Conveying Speed (v m/s): adjustable up and down with frequency inverter Drive: SEW Geared Motor SA37 DT80K4/MM05/BW1 Electrical Data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double ply, green, smooth, KT36 (wear see pictures) Year of Manufacture: 2001 Special Features / Accessories: Side guides included on both sides Optionally available: Support legs Net price plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Itjdpfx Ask Abazsa Nsb For individual, professional advice, please feel free to contact us. Reach out to us by phone or email. We are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics

Kondisi: bekas, Tahun pembuatan: 2001, de-fi Iodok Abmqopfx Aa Notb

Kondisi: bekas, Tahun pembuatan: 1997, Transnorm Belt Curve Conveyor, Left 90°-750-550-IR900 RA2007 Belt curves are frequently used in intralogistics for in-house transport of unit loads and have become indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive system across the entire belt width, they are designed for extended operational times. Tapered drums and a specially developed belt guiding system ensure maximum running smoothness. Technical Specifications: Model: Belt Curve Conveyor Frame Width (NB): 750 mm Belt Width (GuB): 550 mm Motor Height (MH): 480 mm Overall Height (BH): 210 mm Inner Radius (IR): 900 mm Conveying Angle: 90° degrees Conveying Speed (v m/s): please contact us Drive: SEW geared motor Electrical Data: 50Hz V230/400, 0.55 kW /S1 Belt: KT58, replaced prior to delivery. Year of Manufacture: 1997 Available Options: - Supports - Single- or double-sided side guides - Frequency inverter Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg. If you require other dimensions or expert, customized advice, simply get in touch with us. Contact us by phone or email, or use our website filters. We are happy to assist you with the planning and implementation of your projects. Iedjk Abtlopfx Aa Nstb We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics.

Kondisi: bekas, Tahun pembuatan: 2007, Gebhardt roller diverter sorter ejector 45° 1800-1300-550 RA1148 Year of manufacture: 2007 Permissible load: 30 kg/m Own weight: 40 kg/m Roller width: 550 mm Nominal/outer width (NB): 610 / 1300 mm Pusher element: roller strips Set construction height: 680 mm Conveying speed: 0.35 m/sec Brake for accumulation mode on diverting track Drive for diverter mechanism: electric Product dimensions: L x W = 600 mm x 400 mm Optional: Custom height adjustment available on request Ijdpfxjk Aa Efo Aa Nstb Electrical attachments such as light barriers, barcode sensors Control system/software Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, please do not hesitate to contact us. Simply call us or send us an email. We are happy to assist you with the planning and realization of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor Right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It is equipped with a SEW brand gear motor. Support legs are not included in the scope of delivery; these are optionally available upon request. Belt curves are commonly used in intralogistics for in-plant transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves stand out with their performance and reliability. Thanks to a low-tension drive system across the entire belt width, long operating times are not an issue. Tapered rollers and a specially developed belt guide system ensure maximum smooth running. The displayed images of the conveyor system were taken while still installed in a logistics center. Technical specifications: Model: Belt Curve Conveyor TS 1600-105 Conveying length, center radius (NL): 759 mm Itjdpfx Aask Aa Ukj Neb Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support legs optionally available Conveying speed (v m/s): 0.03-1.05 m/s Drive: SEW Gear Motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double-ply, green, smooth, type KT36 Year of manufacture: 2001 Special features / accessories: side guides on both sides included Optional available: Support legs Side guides (single-sided and double-sided) Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, professional advice, simply contact us. Reach us by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics.

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor, left-handed, GKF 20°-750-550 IR1300 RA1479 The Transnorm belt curve conveyor is in good used condition and fully operational. It is equipped with a SEW-branded geared motor. Support legs are not included in the scope of delivery but are available as an optional extra upon request. Belt curves are widely used in intralogistics for in-house transportation of unit loads and have become indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive system across the entire belt width, long operating times are no problem. Tapered drums and a specially-designed belt guide system ensure the highest possible running smoothness. The images shown depict the conveyor system still installed in a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying Length (center radius, NL): 640 mm Frame Width (NB): 750 mm Belt Width (GuB): 550 mm Overall Height (BH): 210 mm Inner Radius (IR): 1300 mm Conveying Angle: 20° degrees Support feet and side guides optionally available on both sides Conveying Speed (v m/s): 0.03-1.05 m/s Drive: SEW Geared Motor SA37/1 DT71D4/MM3/BW1 Electrical Data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Belt: double-layer, green, smooth, KT36 (signs of wear visible in photos) Itsdpfx Aask Abcge Nsb Year of Manufacture: 2001 Options available: Support legs Side guide (single-sided or double-sided) Prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual and professional advice, simply get in touch with us. Contact us by phone or email—we are happy to help you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Kondisi: bekas, de-fi-1 Isdpfx Aek Abg Isa Notb

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor Right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It is equipped with a SEW brand gear motor. Support legs are not included in the scope of delivery; these are optionally available upon request. Belt curves are commonly used in intralogistics for in-plant transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves stand out with their performance and reliability. Thanks to a low-tension drive system across the entire belt width, long operating times are not an issue. Tapered rollers and a specially developed belt guide system ensure maximum smooth running. The displayed images of the conveyor system were taken while still installed in a logistics center. Technical specifications: Model: Belt Curve Conveyor TS 1600-105 Conveying length, center radius (NL): 759 mm Frame width (NB): 750 mm Itjdpfsk Abuiex Aa Nsb Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support legs optionally available Conveying speed (v m/s): 0.03-1.05 m/s Drive: SEW Gear Motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double-ply, green, smooth, type KT36 Year of manufacture: 2001 Special features / accessories: side guides on both sides included Optional available: Support legs Side guides (single-sided and double-sided) Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, professional advice, simply contact us. Reach us by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics.

Kondisi: bekas, Lippert lead-in/out belt, belt conveyor GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 mm, or 820 mm with belt width 600 mm Isdpfjmqty Uex Aa Netb Frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm Overall height (BH): 105 mm Support legs: optionally available Conveying speed (v m/s): speed is matched to the main belt via gear ratio Drive: toothed belt drive Return roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Options available: Support stands Side guides, single- or double-sided Please note that a suitable sprocket must be fitted on the output shaft for the belt drive. As a result, it may be necessary to use a different return roller. Please contact us for further details. Damaged belts are replaced prior to delivery. All prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg. For individual, professional advice, please contact us directly. Simply call us or send us an email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact partner for intralogistics

Kondisi: bekas, Lippert lead-in/out belt, belt conveyor GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 mm, or 820 mm with belt width 600 mm Iedpfx Aomqty Roa Nstb Frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm Overall height (BH): 105 mm Support legs: optionally available Conveying speed (v m/s): speed is matched to the main belt via gear ratio Drive: toothed belt drive Return roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Options available: Support stands Side guides, single- or double-sided Please note that a suitable sprocket must be fitted on the output shaft for the belt drive. As a result, it may be necessary to use a different return roller. Please contact us for further details. Damaged belts are replaced prior to delivery. All prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg. For individual, professional advice, please contact us directly. Simply call us or send us an email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact partner for intralogistics

Kondisi: bekas, Tahun pembuatan: 2007, Gebhardt Roller Curve Conveyor 90° Right 610-550 with 2x Straight Section Itodpfx Aek Aa Rysa Nsb RA1282 The Gebhardt roller curve is from 2007 and is in very good (used) condition. It is equipped with a SEW brand motor. Supports are included in the delivery. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 014.15 Year of manufacture: 2007 Condition: very good (used) Motor: fully functional Angle: 90° Inner radius (IR): 850 mm Nominal/outer width (NB): 610 mm Usable width (NUB): 550 mm Length of straight section: 1 x 300 mm + 1 x 150 mm Motor type: SEW gear motor Motor power: 0.37 kW / S1 50 Hz 2.00 / 1.15 A Conveying speed: 0.37 m/sec Drive: head drive Rollers: Type: G6/50, glide bearings with conical plastic element Weight: 110 kg Scope of delivery: with supports, 670 mm roller top edge Price plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For customized, professional advice, please do not hesitate to contact us. You can reach us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor Left GKF 180°-750-550 IR1000 RA1483 The Transnorm belt curve is in good condition (used) and fully functional. It is equipped with a SEW-branded gear motor. Supports are not included in the scope of delivery, but are available on request as an option. Belt curves are commonly used in intralogistics for the internal transport of unit loads and have become an indispensable part of modern distribution centers. Transnorm belt curves are known for their performance and reliability. Thanks to a low-tension drive across the entire belt width, long operating hours are no problem. Tapered rollers and a specially developed belt guiding system ensure maximum running smoothness. The images shown of the conveyor system were taken while still installed in a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length (middle radius/NL): 4820 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Installation height (BH): 210 mm Inner radius (IR): 1000 mm Conveying angle: 180° Support feet: optionally available Conveying speed (v m/s): adjustable upwards and downwards with frequency inverter Drive: SEW gear motor SA37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: double-layered, green, smooth, KT36 (see pictures for wear) Year of manufacture: 2001 Special features / accessories: Side guides included on both sides Isdjk Abcrepfx Aa Notb Optional: Supports All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice please feel free to contact us. Simply call or email us. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you soon. Kind regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor, Left-Hand GKF 45°-750-550 IR700 RA1451 The Transnorm belt curve conveyor is in good condition (used) and fully operational. It is equipped with a SEW brand geared motor. Support legs are not included. These are optionally available upon request. Belt curves are frequently used in intralogistics for transporting unit loads within facilities and are indispensable in modern distribution centers. Transnorm belt curves are known for their performance and reliability. Thanks to a low-tension drive across the entire belt width, long-duration operation is not an issue. Tapered rollers and a specially engineered belt guidance system ensure maximum smoothness and quiet running. Iodpfxek Aba To Aa Nstb The images show the conveyor system as installed in a logistics center. Technical Specifications: Model: Belt Curve Conveyor TS 1600-105 Conveying length (centerline radius, NL): 680 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 600 mm Curve angle: 45° Support legs: optionally available Conveying speed (v m/s): 0.03 – 1.05 m/s Drive: SEW geared motor SA37 DT80K4/MM05/BW1 Electrical specs: 50Hz, V380-500, kW 0.11 / 0.55 / S1 Belt: double-layer, green, smooth, KT36 (see photos for wear) Year of manufacture: 2001 Optionally included: Support legs Side guide (single-sided and double-sided) All prices net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg. For individual, professional consultation, please feel free to contact us by phone or email. We are happy to support you in the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics.

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor GKF 3900-750-550 IR850 RA1382 The Transnorm belt curve is in good used condition and fully operational. It comes equipped with a SEW brand geared motor. Support stands are not included in the scope of delivery but are optionally available upon request. Belt curves are frequently used in intralogistics for in-house transport of unit loads and have become indispensable in modern distribution centers. Transnorm belt curves are renowned for their performance and reliability. Thanks to a low-tension drive across the entire belt width, they are designed for extended operation times. Tapered rollers and a specially developed belt guide system ensure maximum running smoothness. The images shown display the conveyor system while still installed in a logistics center. Technical data: Designation: Belt Curve Conveyor TS 1600-105 Conveying length (center radius, NL): 3900 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 850 mm Conveying angle: 160° Support feet: optionally available Conveying speed (v m/s): adjustable up and down via frequency inverter Drive: SEW geared motor SA37/T DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: double-layer, green, smooth Year of manufacture: 2001 Special features / accessories: Side guides included on both sides Optionally available: - Support stands - Side guides (one-sided or double-sided) Iodpfx Aajk Aa T Rj Netb Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply contact us. Just reach out to us by phone or email. We are happy to assist with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics

Kondisi: bekas, Tahun pembuatan: 2000, Transnorm Belt Curve Conveyor right GKF 70°-730-550 IR600 RA1936 The Transnorm belt curve is fully functional. It is equipped with a SEW brand gear motor. Supports are not included in the scope of delivery but are optionally available upon request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to the low-stress drive system across the entire belt width, extended operating times are no problem. Tapered drums and a specially designed belt guiding system ensure maximum running smoothness. Technical data: Frame width (NB): 730 mm Belt width (GuB): 550 mm Installation height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees Support legs: optionally available Conveying speed (v m/s): freely adjustable via frequency inverter between 0.032–1.17 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, 0.55 kW / S1 Year of manufacture: 2000 Scope of delivery: Without supports Optionally available: Supports Side guides single- or double-sided Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, please contact us directly. Feel free to reach out via phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Iodpfsk Ablpex Aa Nstb Your specialist and partner for intralogistics.

Kondisi: bekas, Tahun pembuatan: 2007, Gebhardt roller switch sorter ejector 45° 2400-1300-550 RA1147 Type 356.10 Year of manufacture: 2007 Permissible load: 30 kg/m Dead weight: 40 kg/m Roller width: 550 mm Nominal/outer width (NB): 610 mm Ejector element: Small rollers Set installation height: 680 mm Conveying speed: 0.35 m/sec Brake for accumulation mode on ejector lane Drive for ejector mechanism: Electric Dimensions of conveyed goods: L x W = 600 mm x 400 mm Optional: Customised height adjustments upon request Electrical accessories such as light barriers, barcode sensors Iodpek Aa Ebjfx Aa Njtb Control/software Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics

Kondisi: bekas, Tahun pembuatan: 2007, Gebhardt Roller Conveyor Diverter Sorter 45° 1900-1800-550 RA1149 Year of manufacture: 2007 Itsdsk Aa Eijpfx Aa Nob Permissible load capacity: 30 kg/m Dead weight: 40 kg/m Roller width: 550 mm Nominal/Outer width (NB): 610 / 1800 mm Conveyor length: 1900 mm Diverting element: roller segments Set construction height: 680 mm Conveying speed: 0.35 m/sec Brake for accumulation operation on discharge conveyor Discharge mechanism drive: electric Goods dimensions: L x W = 600 mm x 400 mm Optional: Custom-adjusted height upon request Electrical add-ons such as photoelectric sensors, barcode readers Control system/software Prices quoted are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For tailored, professional advice, just get in touch with us. Feel free to contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics.

Kondisi: bekas, Tahun pembuatan: 2007, Gebhardt roller curve conveyor 2 x 90° left 610-550-300 with straight section RA1210 The Gebhardt roller curve with straight section is from the year 2007 and is in good (used) condition. It is equipped with a central SEW brand motor. Supports are not included in the scope of delivery, but can be provided optionally upon request. Technical Data: Manufacturer: Gebhardt Type: 1070.113 Year of manufacture: 2007 Condition: good (used) Motor: fully functional Angle: 2 x 90° with straight section Overall width: 610 mm Clamping length: 550 mm Length of straight section: 300 mm Roller type: G6/50 sliding bearing with tapered plastic molding Load capacity: 30 kg/m Motor type: SEW geared motor Motor power: 0.37 kW/S1 Frequency: 50 Hz, 2 A / 1.15 A Conveying speed: 0.35 m/s Weight: 110 kg Scope of delivery: without supports (please inquire if required) Iodpok Aa Nbsfx Aa Njtb Optional: supports For individual, professional advice, please do not hesitate to contact us. Simply reach out by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact for intralogistics.

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor Left GKF 45°-750-550 IR700 RA1390 The Transnorm belt curve is in good (used) condition and is fully functional. It is equipped with a SEW brand geared motor. Support legs are not included in the scope of delivery, but can be optionally supplied upon request. Belt curve conveyors are frequently used in intralogistics for the in-house transportation of unit loads and are indispensable in modern distribution centers. Transnorm belt curves are known for their performance and reliability. Thanks to a low-tension drive system across the entire belt width, long operating times are no problem. Tapered rollers and a specially developed belt guidance system ensure the highest possible running smoothness. The pictures shown depict the conveyor system in its installed state in a logistics center. Technical Data: Type: Belt Curve Conveyor TS 1600-105 Conveying Length (middle radius, NL): 766 mm Frame Width (NB): 750 mm Belt Width (GuB): 550 mm Overall Height (BH): 210 mm Inner Radius (IR): 700 mm Conveying Angle: 45° Support Legs: optionally available Conveying Speed (V m/s): 0.03–1.05 m/s Drive: SEW Gear Motor SA37 DT80K4/MM05/BW1 Electrical Data: 50Hz v380-500, kW 0.11 / 0.55 / S1 Belt: double-ply, green, smooth Itsdsk Aa T Hjpfx Aa Njb Year of Manufacture: 2001 Optional Accessories: Support legs Side guide (one-sided or both sides) Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, jam operasional: 29.598 h, Data Umum Berat mesin: 20.000 kg Tinggi mesin: 2.230 mm Dimensi Panjang mesin: 8.840 mm Unit Injeksi Diameter sekrup: 80 mm Iedpfox Nr H Isx Aa Netb Unit Penjepit Gaya penjepit: 5.500 kN Engel Duo 3550/550 Tech ini diproduksi pada tahun 1998. Mesin ini memiliki gaya penjepit sebesar 5.500 kN, volume injeksi maksimum 1.960 cm³, dan diameter sekrup 80 mm. Dimensi mesin adalah 8.840 x 2.520 x 2.230 mm dengan berat 20.000 kg. Jika Anda mencari kemampuan moulding injeksi berkualitas tinggi, pertimbangkan mesin Engel Duo 3550/550 Tech yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Injeksi Moulding

Kondisi: bekas, Tahun pembuatan: 2007, Travel X-axis: 550 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Control: INGERSOLL ANDRONIC Automation: High-speed milling machine OPS Ingersoll OPS 550 with EDM machine OPS Ingersoll GANTRY 550 and automation OPS Ingersoll MoldCenter Machine Type: OPS INGERSOLL OPS 550 / GANTRY 500 / IMC 5 Year of Manufacture: 2007 Control Systems: Multiprog, Andronic, Certa OPS 550 High-Speed Milling Machine Number of Axes: 5-axes Milling Spindle: Tool Holder: HSK E40 Spindle Drive Power: 17 kW Spindle Speed: up to 42,000 rpm Linear Axes Travel: X travel: 550 mm Y travel: 400 mm Z travel: 400 mm Work Table: Dimensions: 650 x 500 mm Maximum Table Load: 500 kg - The milling machine requires an overhaul; the power module and cooling unit are missing, and the milling machine’s PC is not operational, presumably due to a defective power supply. Gantry 500 Die-Sinking EDM Machine Travel X-axis: 525 mm Travel Y-axis: 400 mm Travel Z-axis: 450 mm Work Table Size: 750 x 650 mm - The power module for the EDM machine is missing. Handling System IMC 5 For linking a die-sinking EDM machine and a high-speed milling machine Itedpfx Aoxiy A Uea Neb Change gripper Workpiece magazine (40 slots) Electrode magazine (126 slots), Erowa ITS

Kondisi: hampir baru (bekas), Mesin Penyisip Cerat Tipe SI Thom untuk menyisipkan cerat ke dalam kantong yang sudah dipabrikasi. Model - Thom SI-900 Mesin semi otomatis Ideal untuk produksi sampel dan produksi seri kecil Kapasitas: Hingga 10 kantong/menit Mesin pengisian dan pengemasan Thom banyak diminati di mana pun paket fleksibel perlu diisi (kantong / isi ulang): di industri makanan, kosmetik, deterjen, atau pengisian minuman. Itedox Utd Eopfx Aa Neb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, TECHNICAL DETAILS Travel X: 750 mm Travel Z: 800 mm Travel Y: 850 mm Magazine positions: 120 Spindle Speed range: 50–15,000 rpm Spindle diameter (front bearing I.D.): 80 mm Spindle taper: ISO R297 / Taper No. 40 Tool holder: MAS I Type P40T Table Pallet size: 550 × 550 mm Max. rotary table swivel range: 360° Pallet height: 750 mm Distances Distance between spindle nose and table center: 150–1,000 mm Distance between spindle nose and table surface: 50–850 mm Feed rates Rapid traverse X, Y, Z axes: 60,000 mm/min Cutting feed (shared for X, Y, Z axes): 0.001–30 mm/min Tool Changer (ATC) Number of tools: 40 Itsdpoxywtlefx Aa Njb Tool size (Ø × length): Ø75 × 470 mm Tool weight: 8.0 kg Tool change time (tool to tool): 1.3 s Performance Data Positioning accuracy (X, Y, Z axes): ±0.003 mm Repeatability (X, Y, Z axes): ±0.0015 mm Pallet load capacity: 800 kg Thrust force: 9,800 N MACHINE DETAILS Control: FANUC Series 30i Space Requirements & Weight Floor space required: 2,750 × 5,700 mm Machine weight: 16,000 kg Motors Spindle motor (15 min rated power): 22 / 18.5 kW Hydraulic pump motor: 3.7 (4) kW Operating Hours Running time: 12,976 h Control on hours: 112,997 h