Beli Sistem Granulating bekas (14.088)

Kondisi: baru, Table height: 650 – 1050 mm Dimensions (LxWxH): 1450 x 950 x 650 to 1050 mm Nlsdpfx Aefk Aixobmsi Table width: 950 mm Table length: 1450 mm Approx. weight: 425 kg This table allows the user to flexibly adjust the working surface height to meet specific requirements, thereby improving efficiency and ergonomics. Height adjustment is provided as standard by a manual hydraulic system, allowing settings between 650 and 1050 mm (other ranges available on request). The worktop, like the SST fix series, features a 100 x 100 mm grid of Ø 28 mm holes. When used in combination with machining equipment, inspection or post-processing devices (deburring, marking, checking) can be adjusted to the height of the machine clamping table. The table systems can be easily relocated using a pallet truck. These mobile systems, with various fastening and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. Immediately after removal from the machine, tools can be safely serviced on-site and subsequently transferred to maintenance for repairs. Thanks to the fully bolted design of the clamping plate, the working surface can be replaced cost-effectively if it becomes worn. Table 2 below provides an overview of the available standard models. Price must be confirmed by the manufacturer prior to order! For accessories and more information, please follow this link:

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, ffe96715 Nledpfx Aexxmncsbmsi

Kondisi: bekas, jarak tempuh: 282.000 km, Tahun pembuatan: 2001, de-hu-01 Nledexw Nimspfx Abmoi

Kondisi: baik (bekas), Hommel Werke metric gauge block set, not a complete set. Nlsdpfx Aeu Sv I Hebmsi

Kondisi: diremaj di bengkel (bekas), Modernized machine with new LTG control system StoreControl L External dimensions: Overall height: 9,500 mm Overall width: 2,200 mm Overall depth: 2,700 mm 58 carriers with 190 kg load capacity each with clear usable dimensions: W = 1,850 mm D = 825 mm Nlsdpfx Asdnlkhsbmsi H from 0 to 750 mm Total load capacity up to 20,000 kg Operator opening starts at 900 mm above finished floor level, opening height 850 mm Color scheme: GREY / BLUE; carriers sendzimir-galvanized Surfaces cleaned, signs of use possible Performance data Vertical drive: 1 x 2.2 kW / 400 Volt Horizontal drive: 1 x 0.25 kW / 400 Volt Additional features: Manual lift door Subject to errors, technical modifications, and differences between photos and details Delivery and installation currently mainly within Germany, Austria, and several neighboring countries

Kondisi: baru, Height of table: 650 – 1050 mm Dimensions (LxWxH): 1980 x 1480 x 650 to 1050 mm Table width: 1480 mm Table length: 1980 mm Weight approx.: 491 kg This allows the user to flexibly adjust the working surface height to the specific requirements, thereby improving efficiency and ergonomics. Height adjustment is performed as standard via a manual hydraulic system within the range of 650 – 1050 mm (other heights available on request). The worktop also features a 100 x 100 mm grid of Ø 28 mm holes, similar to the SST fix series. Njdpfx Aefk E Dzebmoli When used in combination with machining equipment, inspection or post-processing devices (deburring, marking, testing) can be adapted to the clamping table height of the respective machine. Table systems can easily be relocated on-site using a pallet truck. These mobile systems, with various options for attachment and safety, have proven ideal for maintaining injection moulding and die casting tools. Immediately after removal from the machine, tools can be safely serviced on-site and transported to maintenance for repairs as required. Thanks to the fully bolted design of the clamping plate, worn work surfaces can be replaced cost-effectively at a later date. Table 2 below provides an overview of the available standard models. Prices must be reconfirmed with the manufacturer prior to placing an order!!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, de-001 Nlsdpfx Ajxxmm Ssbmoi

Kondisi: bekas, Tahun pembuatan: 2006, 21057 Njdpfxjw Ilgqo Abmsli

Kondisi: diremaj di bengkel (bekas), Modernized machine with new LTG control system StoreControl L External dimensions: Construction height: 10,000 mm Construction width: 1,600 mm Construction depth: 2,680 mm 45/90 carriers, each with a load capacity of 250 kg in the usable internal dimensions: W = 1,250 mm D = 825 mm H from 0 to 750 mm Total load capacity up to 20,000 kg Operating opening begins at 865 mm above finished floor level, then 850 mm high Color scheme: GREY / BLUE, carriers are Sendzimir galvanized Nlodpfervkrfsx Abmji Surfaces cleaned, signs of use and minor deformations possible Performance data: Vertical drive: 1 x 2.2 kW / 400 Volt Horizontal drive: 1 x 0.29 kW / 400 Volt Additional features: Manual lift door Subject to errors, technical changes, and deviations in details/photos. Images show a similar machine. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Kondisi: baru, Table height: 650 – 1050 mm Dimensions (LxWxH): 1480 x 1480 x 650 to 1050 mm Nljdsgrz Tlopfx Abmsi Table width: 1480 mm Table length: 1480 mm Weight approx.: 464 kg This enables the user to flexibly adjust the working surface height according to specific requirements, thereby improving efficiency and ergonomics. As standard, height adjustment is accomplished via manual hydraulics within a range of 650 – 1050 mm (other ranges available upon request). The table systems can be easily relocated using a pallet truck. These mobile systems have proven to be ideal—with various mounting and securing options—for the maintenance of injection molding and die-casting tools. Immediately after removal from the machine, tools can be safely serviced on site or transferred to the maintenance department for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in case of wear. The following Table 2 provides an overview of the available standard models. Please note: The price must be reconfirmed with the manufacturer before ordering!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Output rate 240/300 l Delivery pressure see specification sheet bar Nlodpfjwgizwjx Abmji Coolant capacity 2900 l Filter area 6 m² Total connected load 45 kW Machine weight approx. 3.1 t Required space approx. 4.3 x 2.6 x 2.2 m

Kondisi: diremaj di bengkel (bekas), modernized machine with new LTG control system StoreControl L Optional control extension available 6 identical machines available External dimensions: Construction height: 6,900 mm Construction width: 1,580 mm Construction depth: 2,680 mm 80 carriers with a load capacity of 250 kg each with usable clear internal dimensions: Width: 1,250 mm Depth: 825 mm Height: 0 to 750 mm Total load capacity up to 20,000 kg Start of operator opening at 860 mm above finished floor level, then 1,000 mm high Nodpfx Abjrvkq Ejmsli Colour scheme: grey / dark grey, carriers Sendzimir-galvanized Surface cleaned, signs of use and minor deformations possible Performance data: Vertical drive: 1 x 2.2 kW / 400 Volts Horizontal drive: 1 x 0.25 kW / 400 Volts Additional features: Manually operated lift door Subject to errors, technical modifications, and deviations in details or photos Images show identical machines Delivery and installation currently mainly in Germany, Austria and several neighboring countries

Kondisi: baru, Table height: 800 mm Dimensions (LxWxH): 1980 x 1480 x 800 mm Table width: 1480 mm Table length: 1980 mm Weight approx.: 530 kg Special workbench systems from the SST, SFT, and SWT fix series, designed as 3D clamping workstations for efficient production of assembly, welding, and adhesive constructions, such as jigs, railings, frames, etc. With the extensive range of clamping accessories (see catalog section welding table accessories), these table systems can also be used as flexibly adjustable fixtures, enabling high-quality production of small and medium-sized batches. The special workbenches feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, which is equipped with a Ø28 mm hole grid. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The perforated table allows the use of a variety of clamping and fixing aids. For special applications, the surface of the tabletop can also be supplied in stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70, deviating from the standard. Due to the fully bolted construction of the clamping plate, the work surface can be cost-effectively replaced in case of wear. This ensures particularly sustainable use of the table system. Price must be requested from the manufacturer prior to ordering!! For accessories and further information, please follow this link: Nedpfx Abefk Aiqsmoli

Kondisi: diremaj di bengkel (bekas), Modernized machine with new LTG-StoreControl P control system 2 identical machines available External dimensions: Overall height: 4340 mm Overall width: 3270 mm Overall depth: 1680 mm 26 carrier arms, each with a load capacity of 250 kg Usable clear dimensions: Height = 215 mm Width = 2730 mm Nledodnh R Hjpfx Abmji Depth = 620 mm Chain pitch: 254 mm For 0 support sets, intermediate shelves are available, resulting in a load capacity of 120 kg per usable level Intermediate shelves can be custom-made on request Deposit table at 900 mm height above finished floor level - worktop covered with V2A stainless steel Colour: grey / grey, surface cleaned, signs of use and minor deformations possible Drive power: 2 x 1.5 kW / 400 Volt Subject to errors, technical changes or slight deviations from the illustrations, Photos show a similar machine Assembly currently mainly in Germany, Austria, and some neighbouring countries

Kondisi: baru, Worktable height: 650 - 1050 mm Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1950 mm Approx. weight: 490 kg Nodpfefk E D Dex Abmoli This feature allows the user to flexibly adjust the working surface height to meet specific requirements, thereby improving efficiency and ergonomics. Height adjustment is standard via a manual hydraulic system within a range of 650 to 1050 mm (higher or lower adjustment ranges available upon request). The worktop, like the SST fix series, features a 100x100 mm Ø 28 mm hole grid. When used in combination with processing machines, test or post-processing fixtures (deburring, marking, inspection) can be adjusted to the height of the machine's clamping table. The table systems can be easily relocated using a pallet truck. These mobile systems, with various fastening and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. After removal from the machine, tools can be safely serviced on-site and then transported to maintenance for repairs. Due to the fully bolted construction of the clamping plate, the working surface can be cost-effectively replaced in the event of wear. The price must be confirmed by the manufacturer prior to ordering!! For accessories and further information, please follow this link:

Kondisi: diremaj di bengkel (bekas), Modernized machine with new LTG-StoreControl P control system Nledpfx Absrw A Eijmsi 3 identical vertical carousel storage systems (paternosters) available External dimensions: Total height: 6,500 mm Total width: 3,670 mm Total depth: 1,560 mm 46 carriers, each with a maximum load capacity of 305 kg Usable internal dimensions per carrier: Height: 210 mm Width: 3,050 mm Depth: 520 mm Chain pitch: 254 mm Additionally included: 46 intermediate shelves for halving the available storage height Total load capacity up to 14,200 kg Deposit table at 1,000 mm above FFL, with stainless steel (NiRo) worktop Color: GREY / DARK GREY, surface cleaned, signs of use possible Drive motor power: 1 x 5.5 kW / 400 Volt Subject to errors, technical changes, and detail deviations from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Kondisi: baru, Table height: 650 - 1050 Dimensions (LxWxH): 1450 x 950 x 650 to 1050 Table width: 950 Table length: 1450 Weight approx.: 308 This allows the user to flexibly adjust the working surface height according to specific requirements, thereby improving cost efficiency and ergonomics. Height adjustment is standard with a manual hydraulic system within a range of 650 – 1050 mm (other heights available upon request). The table systems can be easily relocated using pallet trucks. These mobile systems, featuring various mounting and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. Once removed from the machine, the tools can be safely serviced locally and moved to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in case of later wear. Table 2 below provides an overview of the available standard models. Nljdsgrvv Topfx Abmsi Price must be reconfirmed with the manufacturer before ordering!!

Kondisi: diremaj di bengkel (bekas), Mechanically overhauled machine with new LTG control StoreControl L External dimensions: Installation height: 8,760 mm Installation width: 2,778 mm Installation depth: 2,800 mm 2 identical machines available 48 carriers, each with a payload capacity of 340 kg Clear internal usable dimensions: W = 2,448 mm D = 816 mm H from 50 to 720 mm Total machine payload up to 2 x 20,000 kg Start of operator opening at 900 mm above finished floor level, opening height 750 mm Colour scheme: GREY / BLUE, carriers Sendzimir galvanized, surfaces cleaned, signs of use possible Performance data: Vertical drive 1 x 3.0 kW / 400 Volt Horizontal drive 1 x 0.37 kW / 400 Volt Subject to errors, technical modifications, deviations from the photos Delivery and installation currently mainly in Germany, Austria and several neighbouring countries Nsdpfxsd Rh Dvs Abmeli

Kondisi: baru, Table height: 650 – 1050 mm Dimensions (LxWxH): 1400 x 900 x 650 to 1050 Table width: 900 mm Table length: 1400 mm Approximate weight: 305 kg This table allows the user to flexibly adjust the working surface height to suit specific requirements, improving both efficiency and ergonomics. Standard height adjustment is achieved via a manual hydraulic system within a range of 650 – 1050 mm (other ranges available on request). The table systems can be easily relocated on-site using a pallet truck. These mobile systems, with various mounting and securing options, have proven ideal for the maintenance of injection molding and die casting tools. After removal from the machine, tools can be safely serviced on-site and transferred to maintenance for repairs. Thanks to the fully bolted clamping plate design, the work surface can be replaced cost-effectively in the event of wear. The following Table 2 provides an overview of the available standard models. Price must be confirmed with the manufacturer prior to ordering!! Nodogrvwbepfx Abmsli

Kondisi: diremaj di bengkel (bekas), panjang total: 2.650 mm, lebar total: 2.760 mm, tinggi total: 7.510 mm, Modernized machine with new LTG-StoreControl LL control system External Dimensions: Installation height: 7,510 mm Installation width: 2,760 mm Installation depth: 2,650 mm 40 carriers each with a payload of 170 kg Usable clear internal dimensions per carrier: W = 2,448 mm D = 816 mm H from 50 to 720 mm Total machine payload up to 2 x 9,000 kg Njdpfxjdpd Sco Abmeli Operator opening starts at 900 mm above FFL (finished floor level), height 750 mm Colour: GREY / GREY, carriers sendzimir-galvanized, surfaces cleaned, signs of use possible Performance values: Vertical drive: 1 x 3.0 kW / 400 Volt Horizontal drive: 1 x 0.37 kW / 400 Volt Subject to errors, technical modifications, and deviations from photos Delivery and installation currently mainly in Germany, Austria, and several neighbouring countries

Kondisi: baru, Table height: 800 mm Dimensions (L x W x H): 1480 x 1480 x 800 mm Njdpfx Abegrz Ttjmsli Table width: 1480 mm Table length: 1480 mm Approximate weight: 602 kg This allows the user to flexibly adjust the working surface height to meet specific requirements, thereby improving productivity and ergonomics. Height adjustment is provided as standard through a manual hydraulic system in the range of 800 mm (other heights available on request). The worktop also features a 100 x 100 mm, Ø 28 mm hole grid, as with the SST Fix Series. When used in combination with machining equipment, inspection or reworking fixtures (deburring, marking, inspection) can be set to the height of the machine clamping table. The table systems are easy to move locally using a pallet truck. These mobile systems, with various clamping and securing options, have proven ideal for maintenance of injection moulding and die casting tools. Tools can be safely maintained immediately after removal from the machine and then transferred for repairs to the maintenance department. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in case of future wear. Price must be confirmed with the manufacturer before ordering!! For accessories and further information, please follow this link:

Kondisi: diremaj di bengkel (bekas), Modernized machine with new LTG-StoreControl P control system. External dimensions: - Construction height: 5750 mm - Construction width: 3350 mm - Construction depth: 1550 mm 26 carriers, each with a load capacity of 250 kg, with clear useful dimensions: - Height: 335 mm - Width: 2650 mm - Depth: 450 mm - Chain pitch: 381 mm Nlsdpfx Abedvlt Hemji Deposit table at a height of 1000 mm above finished floor level – worktop made of wood/rubber. Colour: grey/blue, surfaces cleaned, signs of use possible. Drive motor power: 1 x 3.0 kW / 400 Volt. Subject to errors, technical modifications or detail deviations from photos. Delivery and installation currently primarily in Germany, Austria, and several neighbouring countries.

Kondisi: baru, Table height: 800 mm Dimensions (LxWxH): 1480 x 1480 x 800 mm Table width: 1480 mm Table length: 1480 mm Weight approx.: 469 kg Nedogrz Twepfx Abmsli Special workbench systems of the SST, SFT, and SWT fix series serve as 3D clamping workstations for the efficient production of assembly, welding, and bonding constructions, e.g., jigs, railings, frames, etc. With the aid of the extensive range of clamping accessories (see catalog section Weld Table Accessories), these table systems can also be used as flexibly configurable fixtures and thus enable high-quality manufacturing of small and medium-sized batches. The special workbenches feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop with a Ø28 mm hole grid. Additionally, the tabletop has a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The hole pattern allows the use of various clamping elements and positioning aids. For special applications, the tabletop surface can be supplied, deviating from the standard, in stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70. Thanks to the fully bolted construction of the clamping plate, the work surface can be replaced cost-effectively in case of later wear. This makes the table system particularly sustainable in use. Price must still be requested from the manufacturer before ordering! For accessories and further information, please follow this link:

Kondisi: baru, translation-001 Njdpsfk Aitjfx Abmoli

Kondisi: baru, Table height: 650 - 1050 mm Nljdpfxsfk E D Aj Abmsi Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1950 mm Approximate weight: 475 kg This allows the user to flexibly adjust the working surface height to suit the specific requirements, improving efficiency and ergonomics. Height adjustment is performed as standard via a manual hydraulic system in the range of 650 – 1050 mm (other ranges available upon request). The worktop, like the SST fix series, features a 100 x 100 mm grid pattern with 28 mm diameter holes. Used in combination with processing machines, inspection or post-processing fixtures (deburring, marking, inspection) can be adjusted to match the height of the machine’s clamping table. The table systems can easily be relocated using a pallet truck. These mobile systems with various securing and clamping options have proven ideal for maintenance of injection molding and die-casting tools. Tools can be safely serviced on-site immediately after removal from the machine and then transported to maintenance for repairs. Thanks to the fully bolted design of the clamping plate, the work surface can be cost-effectively replaced in the event of wear. Price must be confirmed by the manufacturer before ordering! For accessories and further information, please follow this link: