Beli Sistem Pengukuran Axis Dengan Mengangkat Tahap 4 Untuk bekas (91.976)

Kondisi: sangat baik (bekas), de-to-hu-it-lt-lv-nb-nl-pl Nksdpfx Asqrwxasglet

Kondisi: baik (bekas), Emulsion splitting unit, oil-water separation system Nksdpeb A I Ikefx Aglst The cost-effective and permanently reliable solution to the problem is usually oil/water separation for dispersed condensates. The treated water complies with statutory regulations for discharge into the sewage system. - Dimensions: 750/600/H950 mm - Weight: 80 kg

Kondisi: baik (bekas), Output module, CPU card, input processor, power supply unit, control card, input card, control system, edge banding machine, edge bander -Manufacturer: Homag Homatic -Type: 2Type: 2083028075 -Servo 4-axis card Rev5 -Quantity: 1x control card available -Price: per piece -Dimensions: 20/195/H265 mm -Weight: 0.5 kg Nksdpfx Agob A Sbbolst

Tahun pembuatan: 2010, Kondisi: baik (bekas), Oil/water separator, oil-water separation system - Dimensions: 660/260/H700 mm - Weight: 18 kg Njdpfx Agsb A Sgkelekt

Tahun pembuatan: 2021, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, de Nodpfouvdnnsx Aglekt

Kondisi: baik (bekas), de Nkjdpfevk U Ncsx Agljt

Tahun pembuatan: 2025, Kondisi: baru, translation-1 Nsdjxl Htrjpfx Aglokt

Kondisi: baru, Tahun pembuatan: 2025, f5d67387 Nksdpfew Ivrwex Agljt

Kondisi: baru, Tahun pembuatan: 2025, High Cube Basic Blasting Container with Sweeping Floor Shovel Hopper for approx. 4 pressure vessel fillings + additional blasting vessel capacity for extended blasting operations without refilling. Type: SC.20FHC.5800 Basic Standard equipment, ready for operation: (Simply fill abrasive media and connect power and compressed air) - 1x Control cabinet with emergency stop, Siemens Logo controller - 1x Pressure blasting pot - 1x Pressure regulator and water separator - 1x Blasting hose DN 25 with 8mm blast nozzle - 1x Remote control with dead man’s switch - 1x Feed chute/Hopper for abrasive media - 1x Abrasive sieve + coarse particle catchment container - 1x Rising air separator for blast dust extraction (dust reduction during blasting) - 1x Filter unit with pre-chamber separator - 1x Extraction wall with louvered impact separator - 1x 4mm fabric-reinforced rubber wall lining - 1x Tread plate floor 3/5 - 1x LED lighting - 1x Emergency lighting, end-of-door switch, emergency stop - 1x Breathing air filter - 1x Blasting helmet - 1x Blasting gloves - 1x Suit Options: - Side Door Open: Container can be fully opened on the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - Crane runway 500kg - C-profile rail for powder coating applications - Blasting trolley - Filter with Big Bag - HEPA post-filter for hazardous dusts (e.g., when blasting stainless steel) - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor Nsdpfx Agsw Ivk Teljkt - And much more on request!

Tahun pembuatan: 2024, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Professional mobile extraction unit for welding fume extraction with high-performance extraction arm Suitable for welding processes: MMA, MIG, MAG, TIG, plasma cutting Extraction capacity: max. 2,500 m³/h Extraction arm length: 3 m Motor power: 1.1 kW Connection voltage: 230 V / 50 Hz Sound pressure level: approx. 73 dB(A) Filter surface area: approx. 14 m² Powder-coated steel sheet housing with wheels and carrying handles. Digital control panel with alarm log, operating hours counter, and filter monitoring. The electronic PCB is housed separately and protected from the airflow. High-performance fan located downstream of the filters in a separate, sound-insulated compartment. Spark protection filter installed as standard equipment in the unit. Nodovnzwzepfx Aglekt On request, a set of activated carbon filters (10 kg) can be installed; these are especially required for SOV/VOC, stainless steel and galvanized steel applications.

Kondisi: bekas, Tahun pembuatan: 2014, maschinenbeschreibung-2014 Nkjdpfx Aex Hllxoglst

Kondisi: baik (bekas), Kepala frais, alat frais, chuck quick-change, chuck quick-change Klack, adaptor untuk sistem penjepitan cepat - Pabrikan: adaptor LEUCO untuk sistem penjepitan cepat, sayangnya tanpa penunjukan tipe - Dudukan: Ø 10/20 mm - Jumlah: 39x dudukan tersedia - Harga: per buah, pembelian minimum 5 pcs Nkodpfxsxc Uh So Aglot - Dimensi keseluruhan: Ø 30 x 42 mm - Berat: 0,1 kg/pcs

Kondisi: bekas, Daftar ini untuk Sistem Pengukuran Visual Mitutoyo 202TP. Nedpfxexzgtds Aglskt

Kondisi: bekas, Diese Anzeige bezieht sich auf das Partikelmesssystem LASAIR III 310C von Particle Measuring Systems. Das Gerät befindet sich in einem voll funktionsfähigen Zustand und ist sofort verfügbar. Das Lasair® III 310C ist ein hochmodernes, tragbares Aerosol-Partikelzählsystem, das speziell für die strengen Anforderungen hochregulierter Umgebungen entwickelt wurde. Hergestellt von Particle Measuring Systems (PMS), setzt es den Standard für portable Partikelzähler und gewährleistet die Einhaltung von Sauberkeits- und Compliance-Vorschriften. Wesentliche Merkmale: - Partikelgrößenbereich: 0,3 bis 25,0 µm Nkedpfx Agsxv A T Nolst - Durchflussrate: 1,0 CFM (28,3 L/min) ±5% - Zählgenauigkeit: Entspricht ISO 21501-4 Anforderungen - Anzeige: 8,4" VGA-IR-Farb-Touchscreen (IP65) - Datenspeicher: Speicherung von bis zu 3.000 vollständigen Datensätzen - Konnektivität: Ethernet, Modbus TCP/IP, RS-232, Datenübertragung über USB; optional kabelloses Ethernet - Umweltschnittstellen: Vier 4-20 mA Eingänge für externe Sensoren - Stromversorgung: Betrieb über Netzstrom oder hot-swap-fähige Akkus - Konformität: Erfüllt ISO 14644-1, EU GMP Anhang 1 und ISO 21501-4 Richtlinien - Softwarekompatibilität: Unterstützt FacilityNet, PharmaceuticalNet und FacilityPro für Datenanalyse und Berichterstellung - Berichtsfunktion: Reinraum-Zertifizierungsergebnisse können lokal ausgedruckt, sicher per USB heruntergeladen oder über externe Softwarepakete abgerufen werden - Drahtlose Kommunikation: Netzwerkkommunikation über extern montierten WLAN-Adapter zur einfachen Integration in Netzwerksysteme Technische Daten: - Abmessungen: 30,1 x 32,7 x 25,9 cm - Gewicht: 6 kg (ohne Akku), 7,5 kg (mit zwei optionalen Akkus) - Betriebstemperatur: 0 – 30°C; Luftfeuchtigkeit: 5 – 95 % rF (nicht kondensierend) - Probenleitung: Geeignet für 3/8", 1/2" und 3/4" Schlauch bis 8 Meter Länge - Probenfiltration: Intern gefiltert auf >99,97% bei 0,3 µm

Kondisi: belum diuji (bekas), Tahun pembuatan: 2005, Fungsionalitas: belum diuji, Metrel measuring computer (now Marposs) incl. measuring probes (3TL + 4x short + 12x long), removed from measuring fixture Incl. 2x probe boxes and 2x control panels A second measuring computer available upon request, but some modules have been removed and it is not functional Nkedpfx Ajvl Eurjglst However, it comes with Metrel control cards

Kondisi: baru, Tahun pembuatan: 2025, DPF MASTER FLASH STANDARD™ is a compact device for regenerating diesel particulate filters (DPF) using the hydrodynamic method. It features a 150-liter tank, a pump with a capacity of up to 133 L/min, and an integrated filtration system. The cleaning process is fully automated and restores up to 99% of the filter’s original factory specifications. The device comes with adapters that allow connection to all passenger car DPF filters. To further increase regeneration efficiency, we recommend purchasing the specially developed DPF Heater Pro+ drying system at a special offer price. TECHNICAL DATA: - Weight: 200 kg - Chamber external dimensions (cm): 150 x 80 x 131 - Fluid tank: 150 liters - Working pressure: 3 bar - Power supply: 3 x 400 V - Maximum output: 6 kW - Frequency: 50 Hz - Adjustable fluid temperature: 30°C to 100°C - Pump performance: up to 133 L/min - Fluid filtration: 5 - 100 microns - Safety features: temperature sensor, fluid level sensor, emergency stop switch - Declaration of conformity: CE EQUIPMENT: - Fluid level sensor - Temperature sensor - Programmable temperature controller - Programmable automatic cycle controller - 150-liter water tank - Water pump with capacity up to 133 L/min - Built-in pressure regulator (0-8 bar) - Integrated filtration system - Adapters for DPF filters When you purchase our machine, you receive a starter package to help you get started right away. The package includes: - A set of 3 filter cartridges + 3 replacement filters - XPOWER DPF Cleaner chemical kit (2 x 1 L) Nsdpfsgllxgox Aglekt

Kondisi: baru, Tahun pembuatan: 2025, lebar total: 2.100 mm, panjang total: 1.260 mm, tinggi total: 2.150 mm, A high-quality device for the regeneration of DPF/FAP/GPF/SCR/EURO 5/EURO 6 filters and catalytic converters. Constructed entirely from stainless steel (AISI 304) and acid-resistant steel (AISI 316), suitable for all vehicle types. The machine features a 275-liter tank, a high-pressure pump with a capacity of up to 250 l/min, and an integrated filtration system for drying. The Master Flash technology fully exploits the benefits of the hydrodynamic process and restores filter efficiency up to 99.9% compared to a new filter. It is completely safe for the monolithic structure of DPF filters. Correctly set parameters ensure thorough removal of PM10, PM2.5 particles, soot, carbon deposits, oil, cerium oxides, and heavy metals, preserving the OEM filter properties. The pump with chemical seal and electronics based on components from leading European manufacturers guarantee top quality and reliability. The machine is equipped with a system for measuring filter contamination (backpressure measurement) and an integrated drying system that reaches temperatures from 70 to 130 degrees Celsius. The advanced filtration system with a pre-filter significantly extends the service life of the main filters. Master Flash technology, combined with the unique XPOWER DPF CLEANER chemistry, effectively removes PM10, PM2.5, carbon deposits, oil, cerium, and heavy metals without mechanical intervention in the filter structure, restoring factory performance up to 99.9%. TECHNICAL SPECIFICATIONS: Nkodpfx Aogllkajglst * Weight: 650 kg * External dimensions (H x W x D): 215 x 210 x 126 cm * Chamber dimensions (H x W x D): 107 x 140 x 89 cm * Tank capacity: 275 l * Operating pressure: 6 - 8 bar (90 - 100 psi) * Voltage: 3 x 400V * Maximum power: 12 kW * Frequency: 50 Hz * Water inlet: 1/2” * Water outlet: 6/4” * Air connection: pneumatic quick coupling DN 7.2, plug * Ambient temperature: 5 - 35°C EQUIPMENT: • High-quality components • 7” color touchscreen • Sensors: fluid level, fluid and air temperature, pressure/flow, door opening, phase failure and phase sequence • System for measuring filter contamination • Chamber made from stainless steel AISI 316 • Advanced 4-stage fluid filtration • Two heating elements • Integrated drying system with a temperature of 70 to 130°C • Drying system cooling • Integrated thermal printer for filter parameter printouts • Ethernet controller for remote maintenance • Adapter set for connecting DPF/FAP/GPF/CAT/SCR filters • EURO5 and EURO6 adapters • Starter kit of consumables (complete filter set + 2L XPOWER DPF Cleaner solution) • Extended 12-month manufacturer’s warranty (optional 24 or 36 months) AVAILABLE IN VARIOUS CONFIGURATIONS – CONTACT US FOR FURTHER INFORMATION.

Kondisi: baru, Tahun pembuatan: 2025, DPF MASTER FLASH PROFESSIONAL™ A professional device for the regeneration of DPF/FAP/GPF filters and catalytic converters, designed for passenger cars and light commercial vehicles. Features include a 185-liter tank, a pump with a capacity of up to 133 L/min, and an integrated drying system. The interior of the machine is constructed from stainless steel (AISI 304) and acid-resistant steel (AISI 316). The cleaning technology operates in a closed circuit using a hydrodynamic method. The device allows measurement of filter contamination both before and after regeneration, with results displayed in mbar. It is equipped with an integrated drying system capable of reaching temperatures up to 100°C. After regeneration, a final backpressure measurement is performed, which is provided to the customer as a printout. This comprehensive cleaning process can restore the factory parameters of the filter by up to 99.9%. Components from leading European manufacturers have been used in the construction of the machine, ensuring top quality and reliability. EQUIPMENT: • 7-inch color touchscreen Nksdpfxsgllwio Agljt • Sensors: liquid level, fluid and air temperature, flow pressure, chamber door opening • Safety features: emergency stop switch, limit switch for chamber door, phase failure and phase sequence monitoring • System for measuring filter contamination • Chamber made of AISI 316 stainless steel • Advanced 4-stage liquid filtration system • Integrated drying system with stepless adjustment in the temperature range of 70 to 100°C • Cooling for the drying system • Integrated thermal printer for printing filter parameters • Ethernet controller for remote diagnostics • Set of connection adapters for DPF / FAP / GPF / KAT / SCR filters • Starter kit for consumables (one filter set + 2L XTON DPF cleaning fluid) • Liquid tank with a volume of up to 185 liters • Extended manufacturer’s warranty for 12 months (optionally 24 or 36 months) ADDITIONAL OPTIONS: • Automatic filter cleaning on both sides • Separate fluid circuit with an additional pump • Thermal insulation for the fluid tank • Automatic fluid refilling • Automatic dosing of cleaning agents • Quick-X filter mounting system • EURO5 and EURO6 adapters

Kondisi: hampir baru (bekas), Positioned after an independent double-end tenoner (or formatting & edge banding machine) that operates autonomously. Nodpfoc Ux Tmox Aglekt For turning the workpieces by 90°, changeable from crosswise to lengthwise feeding. Separate electrical control panel. 1st roller table (crosswise) with motorized rollers (mm): 2200 x 1850 Motorized turning transfer unit, with double cone (1 top + 1 bottom) 2nd roller table (lengthwise) with motorized rollers (mm): 1300 x 2900 Total connected load: 4 kW Total machine length: 4800 mm

Kondisi: hampir baru (bekas), Equipment for placement between two double-end tenoners (or two double-sided combination machines) in-line (straight position) or in front of a standalone double-end tenoner (or combination machine) For rotating workpieces 90°, can be used in cross transfer from longitudinal to transverse Separate electric control cabinet 1st roller table (longitudinal) with motorized rollers (mm) 1300 x 2900 Nodpfx Agoc Ux Tljlskt Motorized rotating transfer unit, with double cone (1 top + 1 bottom) 2nd roller table (crosswise) with motorized rollers (mm) 2200 x 2550 Total connected load: 4 kW Total machine length: 5500 mm

Kondisi: sangat baik (bekas), LONGITUDINAL-CROSS ROTARY TRANSFER Nkedpod Siydefx Aglot Equipment for transfer between two double-end tenoners (or two double-sided edge banding machines) in a straight line (inline) configuration, or can be placed in front of an independent double-end tenoner (or edge banding machine). Designed to rotate workpieces by 90°, suitable for use from longitudinal to crosswise transfer. Equipped with integrated control cabinet and operator panel. Overall length: 6200 mm 1st Roller conveyor (longitudinal), with motorized rollers: approx. 1300 x 3200 mm Motorized rotary transfer unit, with double cone (1 top + 1 bottom) 2nd Roller conveyor (crosswise), with motorized rollers: approx. 2500 x 3000 mm Max. panel dimensions: 195 x 250 mm Max. panel dimensions: 1200 x 2500 mm Min./Max. panel thickness: 12 – 40 mm Total connected load: 3 kW

Kondisi: sangat baik (bekas), TECHNICAL DATA (NOT OF THIS MACHINE) — RETURN DEVICE for Edge Banding Machine (LEFT SIDE) When combined with a single-sided edge banding machine, it allows a single operator to ensure continuous feeding of the machine. Air curtain section, infeed and outfeed (overall dimensions: 3520 x 2560 mm) 180° transfer (3120 x 2140 mm) with motorized roller conveyors and motorized belts Motorized conveyor (9080 x 1560 mm) Workpiece dimension range (MIN/MAX): Njdpfx Agoff R Tqjlekt Length — 240 mm / 2800 mm Width — 120 mm / 1300 mm Thickness — 8 mm / 60 mm (optionally up to 100 mm)

Kondisi: seperti baru (mesin pameran), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE. The line consists of the following machines: VZ0200A) Infeed station with double loading unit “BARGSTEDT” Model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge-banding machine “HOMAG” Model KFL 525/8/A3/15 VZ0200C) Turnover station (90° LONGITUDINAL-TRANSVERSE) “HOMAG” Model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge-banding machine “HOMAG” Model KFL 526/10/A3/30 VZ0200E) Turnover station (90° TRANSVERSE-LONGITUDINAL) “HOMAG” Model TDL 510/25/12 VZ0200F) Sword brush “WANDRES” Njdjdt Rgvepfx Agljkt VZ0200G) Stacking station with double buffer unit “BARGSTEDT” Model TSP 410/D/25/12

Kondisi: sangat baik (bekas), Return conveyor system for edge banding machine (LEFT) When combined with a single-sided edge banding machine, it enables one operator to feed the machine continuously (the processed workpiece is automatically returned to the operator). Roller conveyor with 180° transport belts: 2600 mm x 1800 mm Nksdjgz Atbepfx Aglet 1st conveyor section: 7000 x 900 mm 2nd conveyor section: 2500 x 850 mm Model: BOOMERANG BONSAI

Kondisi: sangat baik (bekas), Turn the plates from top to bottom (180°) Plate entry and exit in longitudinal direction One stack of plates handled at a time Min/Max stack thickness mm: 1000 / 1600 Working width (min/max) mm: 300 / 1300 Nsdsgvpn Iepfx Agljkt Max useful working length (min/max) mm: 500 (min) / 3000 Separate electrical control panel Total connected load kW: 4.3