Beli Stan Bubuk bekas (6.564)

Kondisi: bekas, ATS-Tanner ATS-CE 340/30 Banding Machine Product width: 1"-13" Product height: up to 6" Speed/cycles: 22-26 cycles/min. Performance: Up to 26 bands per minute Band width: 30 mm Voltage: 115 V/50 Hz, 115 V/60 Hz Iaodpfxewlgz Sj Alcot Electrical power: approx. 0.2 kW Weight: 25 kg Available at short notice

Kondisi: bekas, Kepala boring universal STANKO Iasdexciv Depfx Alcst Alat spindle, kepala spindle Holder alat: SK 40 - M16 Holder bushing pengatur: Ø 36 mm Rentang penyesuaian: 17,5 mm Akurasi penyesuaian: 0,01 mm Shaft alat: Ø 18/22 mm Diameter pemesinan: sekitar 10–45 mm - Adapter SK40 ke bushing pengatur Ø 36 mm - Kepala boring dengan shaft bushing pengatur Ø 36 mm Berat sendiri: 5 kg Kondisi sangat baik

Kondisi: bekas, kapasitas tangki bahan bakar: 63 l, warna: oranye, Tahun pembuatan: 2018, jam operasional: 1.480 h, Tahun pembuatan: 2018 Berat kosong: 2.300 kg Kapasitas muatan: 612 kg GVW: 2.912 kg Dimensi (P x L x T): 310 x 161 x 195 cm Iedpjx R S Rvefx Alceat Kemudi: tetap Tipe mesin: Yanmar Yanmar

Kondisi: sangat baik (bekas), Tahun pembuatan: 1967, Putaran di atas alas: 800 mm Iajdpfoy Iai Ujx Alcst Putaran di atas dudukan: 450 mm Panjang pembubutan: 2800 mm Berat benda kerja: 5000 kg

Kondisi: sangat baik (bekas), Standardkessel Duisburg 10,000 kg/h 15.7 bar + Weishaupt gas burner. Already dismantled, ready for collection. Iaodpfx Aljnwit Sjcst

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, de1 Iasdjww Atujpfx Alcet

Kondisi: diremaj di bengkel (bekas), Kami menawarkan turbin STANĚK MZ350 yang telah direkondisi. Turbin dengan motor 7,5kW. Rekondisi dilakukan menggunakan suku cadang asli dari baja perkakas. Nozzle, mesin peledakan, turbin pelempar. Iajdpoy H Aklefx Alcet

Kondisi: baik (bekas), Kapasitas bor: Ø 50 mm Pemasangan spindle: MK5 Kecepatan spindle: 18 - 2.000 rpm Jangkauan spindle: 400 mm Jangkauan horizontal maks: 1.250 mm Spindle ke meja dasar maks: 1.600 mm Dilengkapi dengan: - Perangkat tapping - Meja bor Isdpey Ia Azefx Alceat Berat mesin: 4.500 kg Dimensi mesin P×L×T: 2.800 x 1.000 x 3.500 mm

Kondisi: baru, Tahun pembuatan: 2026, Item: A-12068 (11137) Tangki vertikal 50m3 Tangki BARU untuk kain: Kapasitas 50.000 L Dimensi luar: Diameter Ø 3000 mm, Total Tinggi 8400 mm. Tangki vertikal stainless steel, tersedia 5 unit untuk ditawarkan. Iasdoy Aty Nspfx Alcst Atas dan bawah berbentuk kerucut, lubang manusia di bawah, dan kaki stainless steel. AISI 304 atau AISI 316. Dapat dikirim dengan isolasi menggunakan pelat trapezoid opsional dan agitator.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin die cutting rol dalam kondisi sangat baik, hampir tidak terpakai. Alamat produsen cetakan die cutting berkualitas tinggi juga dapat disertakan atas permintaan. Ijdpoxz Tn Ujfx Alcsat

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak tempuh: 17.300 km, daya: 88,26 kW (120,00 hp), jenis bahan bakar: diesel, berat kosong: 5.430 kg, berat keseluruhan: 10.500 kg, konfigurasi gandar: 4x4, bahan bakar: diesel, Tahun pembuatan: 1986, Perlengkapan: penggerak semua roda,

Kondisi: baik (bekas), de-to-hu-it-lt-lv-nb-nl-pl Isdsy Atv Rspfx Alcoat

Kondisi: baik (bekas), 5/2 Wegeventil, Magnetventil, Pneumatikventil, Luftventil, Druckventil, Ventilblock, Steuerblock, Umschalt-Wegeventil, Ventil Valve, 4/3-Wegeventil, Regelventil  -Hersteller: GSL German Standard Lift, Wegeventil -Typ: 4070030000 BK -Pmax: bar -Anzahl: 2x Ventil vorhanden -Preis: pro Stück Isdsy Atu Hopfx Alcoat -Abmessung: 236/46/H70 mm -Gewicht: 2,2 kg/St.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, Diameter meja: 800 mm Diameter maks.: 1000 mm Iajdsy D Nahopfx Alcjt Langkah maks.: 200 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Diameter meja: 1000 mm Iaedoy D I Iwepfx Alcot Diameter roda gigi maksimum: 1250 mm Langkah maksimum: 200 mm Ketinggian tambahan: 350 mm

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, lebar total: 1.400 mm, panjang total: 1.000 mm, tinggi total: 950 mm, berat keseluruhan: 195 kg, tegangan masuk: 220 V, daya motor pengumpan: 1.100 W, tegangan sekunder: 380 V, jumlah rol: 7, Perlengkapan: Penandaan CE, dokumentasi / manual, henti darurat, Wir fertigen die "R-PRO 25" Doppelstehfalzmaschine mit höchster Präzision auf modernsten CNC-Bearbeitungszentren. Mit der benutzerfreundlichen, starken, langlebigen und robusten "R-PRO 25" Stehfalz-Profiliermaschine können Sie Ihre Stehfalz-Anwendungen qualitätsorientiert ausführen. Als REIS STANDING SEAM TECHNOLOGIES unterstützen wir unsere Kunden jederzeit – von der Produktion bis zur Montage, vom Verkauf bis zum technischen Service – durch eine umfangreiche Ersatzteilbevorratung. MAXIMALE MOBILITÄT ZU NIEDRIGEN KOSTEN Große, schwer zu transportierende und teure Stehfalz-Profileinrichtungen sind nicht mehr nötig – dank der kompakten "R-PRO 25" Stehfalzmaschine. Mit unserer mobilen Stehfalzmaschine ist eine präzise Produktion von Falzbahnen in beliebiger Länge direkt vor Ort möglich. QUALITÄT UND VERTRAUEN – REIS STANDING SEAM TECHNOLOGIES Jede gefertigte "R-PRO 25" Stehfalzmaschine durchläuft umfangreiche Prüfungen. Einfache Wartung CE-Zertifikat EU-Konformitätserklärung ISO 9001 DIN EN 349 DIN EN 1037 DIN EN ISO 12100-1/2 DIN EN 13849-1 DIN EN ISO 13850 DIN EN ISO 13857 Iasdpfx Aljhpuhtscst DIN EN 14121-1 DIN EN 60204-1 2 Jahre Garantie Stabile Unternehmensführung. Loyal und hervorragend ausgebildetes Team. "R-PRO 25" Standardausstattung - Standard Falzhöhe: 25 mm - Gewicht: 195 kg - Transport mit Pkw möglich - Leicht aufs Dach zu heben - Für den einfachen Transport in vier Teile zerlegbar (Standard) - Kabelgebundene Fernbedienung (Standard) - Not-Aus-Taste (Standard) - Vorwärts-/Rückwärtsfunktion (Standard) - Stufenlose Materialbreitenverstellung (250-700 mm) (Standard) - Fahrrollen (mit Feststellfunktion) (Standard) "R-PRO" Sonderausstattung - Sickenprägeeinrichtung (Optional) (R-Pro 25 Plus – R-Pro DUO – R-Pro MAX) - Digitaler Encoder (Optional) (R-Pro 25 Plus – R-Pro DUO – R-Pro MAX) - Kreissäge (Optional) (R-Pro 25 Plus) - Manuelle Guillotine-Schere (Optional) (R-Pro MAX) - Gleitende Schere (Optional) (R-Pro DUO) Für weitere Informationen und Preise kontaktieren Sie uns bitte…

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized version Isdpfxed Tbbdo Alcjat Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay distance - Incl. mounting hardware (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and system can be expanded at any time) - (*Larger quantities available: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Incl. mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notice. The material is packed sensibly to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The ground must be concrete, level, suitable for doweling, and capable of bearing the imposed loads. The customer is responsible for verifying and ensuring ground conditions, load capacity, and any necessary official permits. Uprights must be anchored to the ground on-site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm upright top projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reorder and extension possible at any time) - (*Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening hardware (without floor anchors) Iasdpfofdkb Tsx Alcst - Supplied with assembly instructions and C4 load signs in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We provide reliable shipping with advance notice prior to delivery. Goods are packed efficiently to allow for easy unloading. When installed outdoors, the load capacity is reduced to account for wind and snow loads. The floor must be concrete, level, and suitable for dowelling, and must be able to bear the imposed loads. The surface condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is not necessary or recommended. According to professional association guidelines, rack uprights should provide at least a 500 mm projection at the top storage level above the upright top.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used Cantilever Racking: Bolted System, Hot-dip Galvanised Version Scope of delivery: - 4 rack uprights, height 4,160 mm, with base section, usable depth 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: Iedpfx Aled Tqalocoat - Robust steel construction from IPE sections (bolted system) - Surface hot-dip galvanised - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity plates C4 according to DIN standard - Specialist telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for doweling, and capable of bearing all applied loads. The customer is responsible for checking and ensuring the substrate condition, bearing capacity, and obtaining any necessary official approvals. Uprights are to be anchored to the ground by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, uprights should have at least 500 mm clearance above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm upright distance Including fastening material (floor anchors not included) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and expansion always available on request) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm Iedpfx Alefdkb Ujceat - Includes fixing material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Pickup on site possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight forwarding with prior notification before delivery. Materials are packaged for easy unloading. When installing outdoors, load capacities are reduced by wind and snow load. The foundation must be concrete, level, and suitable for dowelling as well as capable of bearing the applied loads. The substrate condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and is not recommended. According to professional association guidelines, it is recommended that the rack uprights have at least 500 mm projection above the uppermost storage level.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, de-to-en-001 Iedpeguk A Hefx Alcoat

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm with base section 1,200 mm Iaodsfdkbhspfx Alcet - 12 cantilever arms with 1,200 mm usable depth, standard - Including bracing sets (longitudinal and diagonal) for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reordering and extension possible at any time) - (Offer also available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Including assembly instructions and load plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with notification prior to delivery. The material is packed in a practical way to enable easy unloading. Please note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for dowelling, and must be able to accommodate the acting loads. The customer is responsible for verifying ground condition, load-bearing capacity, and any required official permits. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German trade association recommendations, rack uprights should extend at least 500 mm above the uppermost storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking used: Bolt system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 3,000 mm, with foot section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard type - Including longitudinal and diagonal bracing for 1,300 mm center distance - Including mounting hardware (excluding floor anchors) * (Delivery time approx. 1 week) * (All parts undamaged!) * (Spare parts and extensions available at any time) * (Bulk offer available: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt assembly) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay distance - Rack length = 4,000 mm - Including mounting hardware (excluding floor anchors) - Includes assembly instructions and C4 load rating labels according to DIN standard - Expert technical advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight forwarding services with advance delivery notification. The material is securely packed to enable easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for dowel anchoring, and able to support the expected loads. The client is responsible for verifying and ensuring substrate conditions, load-bearing capacity, and any necessary official permits. Iasdpfxeguk Dks Alcst The rack uprights must be secured to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, the rack uprights should extend at least 500 mm above the top storage level.

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut per lengan kantilever: 500 kg, tinggi rak: 3.200 mm, panjang total: 2.100 mm, tinggi total: 3.200 mm, jarak gandar: 1.000 mm, kapasitas beban per penyangga: 2.500 kg, Cantilever racking, hot-dip galvanized design: Scope of delivery: - 3 rack uprights, height 3.2 m, with base section, 1.8 m usable depth (total depth 2 m) - 12 cantilever arms with 1.8 m usable depth (for chipboards approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing: 1.3 m) - Fastening materials (bolts, nuts, and washers) Net price: €2,490.00 plus VAT Detailed description: - Robust steel structure made from IPE sections (bolted system) - Rack height: 3,200 mm Iaedpfoqt Dmysx Alcet - Load capacity per upright: 2,500 kg - Base section and cantilever arms: 1,800 mm usable depth - (For chipboard panels up to 2,100 mm deep) - Cantilever arms are height-adjustable in 100 mm increments - Each upright fitted with 4 bolted cantilever arms as standard (= 5 storage levels) - Load capacity per arm: 500 kg - Including longitudinal and diagonal braces for 1,000 mm upright spacing - Rack length: 2,100 mm - Inclusive of fastening material (without floor anchors) - Includes assembly instructions and C4 load labels in accordance with DIN standards - Made in Germany - Short delivery times Our cantilever racks are manufactured exclusively in Germany. We provide reliable transport with advance delivery notification. The material is sensibly packaged to facilitate easy unloading. Delivery for stock items can be made approx. 1 week after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixing, and able to support the required loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to professional industry guidelines, it is recommended that the uprights have a minimum 500 mm projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 upright frames, 2,600 mm height with 1,000 mm base segments - 12 cantilever arms, 1,000 mm depth, standard version - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and expansion available at any time) - (*Offer available in larger quantities: approx. 90 upright frames in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base segments and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg Iajdpjguk Dvjfx Alcjt - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable shipping with advance delivery notice. Material is packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and capable of withstanding the applicable loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Wall anchoring is neither necessary nor recommended. According to occupational safety guidelines, it is recommended that the upright frames have at least a 500 mm projection above the top storage level.