Beli Stan Bubuk bekas (6.507)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reorder and extension possible at any time) - (*Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg Kedpjfdkb Tjfx Abxjdl - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening hardware (without floor anchors) - Supplied with assembly instructions and C4 load signs in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We provide reliable shipping with advance notice prior to delivery. Goods are packed efficiently to allow for easy unloading. When installed outdoors, the load capacity is reduced to account for wind and snow loads. The floor must be concrete, level, and suitable for dowelling, and must be able to bear the imposed loads. The surface condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is not necessary or recommended. According to professional association guidelines, rack uprights should provide at least a 500 mm projection at the top storage level above the upright top.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used Cantilever Racking: Bolted System, Hot-dip Galvanised Version Scope of delivery: - 4 rack uprights, height 4,160 mm, with base section, usable depth 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard Kedpfod Tqalsx Abxodl - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction from IPE sections (bolted system) - Surface hot-dip galvanised - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity plates C4 according to DIN standard - Specialist telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for doweling, and capable of bearing all applied loads. The customer is responsible for checking and ensuring the substrate condition, bearing capacity, and obtaining any necessary official approvals. Uprights are to be anchored to the ground by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, uprights should have at least 500 mm clearance above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm upright distance Including fastening material (floor anchors not included) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and expansion always available on request) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) Ksdpfx Aefdkb Usbxjdl - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Includes fixing material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Pickup on site possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight forwarding with prior notification before delivery. Materials are packaged for easy unloading. When installing outdoors, load capacities are reduced by wind and snow load. The foundation must be concrete, level, and suitable for dowelling as well as capable of bearing the applied loads. The substrate condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and is not recommended. According to professional association guidelines, it is recommended that the rack uprights have at least 500 mm projection above the uppermost storage level.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, de-to-en-001 Kdsdpfx Aeguk A Hebxsl

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking used: Bolt system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 3,000 mm, with foot section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard type - Including longitudinal and diagonal bracing for 1,300 mm center distance - Including mounting hardware (excluding floor anchors) * (Delivery time approx. 1 week) * (All parts undamaged!) * (Spare parts and extensions available at any time) * (Bulk offer available: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt assembly) Kodpfx Ajguk Dksbxodl - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay distance - Rack length = 4,000 mm - Including mounting hardware (excluding floor anchors) - Includes assembly instructions and C4 load rating labels according to DIN standard - Expert technical advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight forwarding services with advance delivery notification. The material is securely packed to enable easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for dowel anchoring, and able to support the expected loads. The client is responsible for verifying and ensuring substrate conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be secured to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, the rack uprights should extend at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including bracing sets (longitudinal and diagonal) for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (Delivery time approx. 1 week) Kdedpfxefdkbhe Abxol - (No damaged parts!) - (Spare parts reordering and extension possible at any time) - (Offer also available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Including assembly instructions and load plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with notification prior to delivery. The material is packed in a practical way to enable easy unloading. Please note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for dowelling, and must be able to accommodate the acting loads. The customer is responsible for verifying ground condition, load-bearing capacity, and any required official permits. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German trade association recommendations, rack uprights should extend at least 500 mm above the uppermost storage level.

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut per lengan kantilever: 500 kg, tinggi rak: 3.200 mm, panjang total: 2.100 mm, tinggi total: 3.200 mm, jarak gandar: 1.000 mm, kapasitas beban per penyangga: 2.500 kg, Cantilever racking, hot-dip galvanized design: Scope of delivery: - 3 rack uprights, height 3.2 m, with base section, 1.8 m usable depth (total depth 2 m) - 12 cantilever arms with 1.8 m usable depth (for chipboards approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing: 1.3 m) - Fastening materials (bolts, nuts, and washers) Net price: €2,490.00 plus VAT Detailed description: - Robust steel structure made from IPE sections (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms: 1,800 mm usable depth - (For chipboard panels up to 2,100 mm deep) - Cantilever arms are height-adjustable in 100 mm increments - Each upright fitted with 4 bolted cantilever arms as standard (= 5 storage levels) - Load capacity per arm: 500 kg - Including longitudinal and diagonal braces for 1,000 mm upright spacing - Rack length: 2,100 mm - Inclusive of fastening material (without floor anchors) - Includes assembly instructions and C4 load labels in accordance with DIN standards - Made in Germany - Short delivery times Kodpfeqt Dmyox Abxodl Our cantilever racks are manufactured exclusively in Germany. We provide reliable transport with advance delivery notification. The material is sensibly packaged to facilitate easy unloading. Delivery for stock items can be made approx. 1 week after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixing, and able to support the required loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to professional industry guidelines, it is recommended that the uprights have a minimum 500 mm projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 upright frames, 2,600 mm height with 1,000 mm base segments - 12 cantilever arms, 1,000 mm depth, standard version - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and expansion available at any time) Kjdpfoguk Dvjx Abxsdl - (*Offer available in larger quantities: approx. 90 upright frames in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base segments and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable shipping with advance delivery notice. Material is packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and capable of withstanding the applicable loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Wall anchoring is neither necessary nor recommended. According to occupational safety guidelines, it is recommended that the upright frames have at least a 500 mm projection above the top storage level.

Kondisi: baik (bekas), Tahun pembuatan: 1990, Hydraulic surface grinding machine with automatic vertical feed Max. grinding length 670 mm Max. grinding width 280 mm Kdjdef Um Raepfx Abxol Max. grinding height 400 mm Table speed, longitudinal 2 – 35 m/min Table speed, cross 0.3 – 40 mm/stroke Rapid traverse Yes Grinding wheel dimensions 300 / 76 x 40 mm Drive power 4 kW Machine dimensions (L x W x H) 2000 x 1850 x 2000 mm Machine weight 2300 kg Hydraulic & electrical unit dimensions (L x W x H) 1200 x 800 x 2000 mm Hydraulic & electrical unit weight 650 kg Accessories / Special Features: • Permanent magnetic chuck 630 x 200 mm • Automatic vertical feed with digital readout • Manual dressing device • Coolant system • Separate hydraulic unit • Grinding wheel • Machine leveling elements Note: o Hydraulic cylinder for table traverse newly resealed o New filters in the hydraulic unit o Handwheel adjustment for cross feed newly overhauled Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund – Wambel

Kondisi: sangat baik (bekas), Tahun pembuatan: 1976, Diameter maks.: 560 mm Kjdpfxoy A Ekme Abxjdl Panjang kerja: 3550 mm Panjang benda kerja maks.: 4000 mm

Kondisi: bekas, Tahun pembuatan: 1993, x-Weg 0500 mm y-Weg 400 mm z-Weg 420 mm Tischgröße 800 x 400 mm Vorschubbereich 1- 3000 mm/min Eilgang 0,083- 5 m/min Werkzeugaufnahme ISO 40 Drehzahlbereich 20- 4000 U/min Hauptantrieb DC 5 kW CNC Steuerung 355 HH Gesamtleistungsbedarf 10,9 KW Maschinengewicht ca. 2300 kg Raumbedarf ca. 2,5 x 2,5 x 2,0 m CNC Werkzeugfräsmaschine mit Heidenhain TNC 355 Steuerung und Spritzschutzkabine. Kdedpfx Aboyy A Dxoxel

Kondisi: bekas, tinggi total: 2.000 mm, panjang total: 1.900 mm, lebar total: 1.700 mm, ts_001 Kdodpowh Npkofx Abxjl

Tahun pembuatan: 2014, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, CNC roda gigi frais Vistan 53B30P Dijual mesin frais roda gigi CNC Vistan 53B30P dengan kontrol modern Siemens Simatic Touch. Mesin ini sangat cocok untuk pemrosesan presisi roda gigi serta menawarkan produktivitas dan akurasi pengulangan yang tinggi. Spesifikasi teknis: Diameter benda kerja maks: 320 mm Modul maks: 6 Lebar gigi maks: 220 mm Diameter spindle: 250 mm Diameter pemotong heliks maks: 160 mm Perjalanan vertikal maksimum unit chamfer: 250 mm Kontrol CNC: Siemens Simatic Touch Mesin dalam kondisi teknis sangat baik, siap digunakan segera. Kdjdpfxsyw Nw Te Abxel

Kondisi: baik (bekas), Steady rest, follow rest, steady Kdodpfxsd Nrpgo Abxol

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, lebar total: 1.600 mm, panjang total: 1.800 mm, berat keseluruhan: 5.600 kg, TMZ (Gaueh) Stanztiegel H-142, tahun produksi 1986, ukuran 900x1400 mm, pelat stans yang dikeraskan 5 mm, sistem pelumasan hidrolik – tanpa kandang pengaman Kedpoyan I Iefx Abxjdl

Kondisi: baru, Clutch-brake unit series UV 31… for presses type KD2324, KD2124, KD2324K, KD2124K, KD2324E, KD2124E, KD2128, KD2328, KD2128K, KD2328K, KD2128E, KD2328E, KD2126, KD2326, KD2126K, KD2326K, KD2126E, KD2326E, H-3222A, HA-3223, HA-3225, H-475, H-481, H-483. The brake offered is brand new, with 100% confirmed accuracy and efficiency. Spare parts such as brake discs, friction linings, bushings, body pins, flywheel pins, springs, and gasket sets are also available. Ksdpfxev Saxro Abxjdl We provide clutch-brake types: YB3132, YB3135, YB3138, YB3141, YB3144, YB3146 for various guillotines and presses from the former USSR. The weight of a complete clutch unit ranges from 200 to 300 kg, depending on type. Our range also includes other parts and accessories for metalworking machines manufactured in Russia (former USSR).

Kondisi: baik (bekas), Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, tischgroesse-2000x650-zubehoer Kdodpsyr Iqmefx Abxel

Kondisi: baik (bekas), Dalam paket pengiriman termasuk: 01x Pelindung tiang, bekas Pabrikan: A-Safe Tipe: P-03-01-0026 RackGuard (S) LLR- 600 mm Material: Plastik Memaplex Warna material: kuning Kjdpfx Absytpm Sexjdl Tinggi total: sekitar 600 mm Lebar total: sekitar 140 mm Untuk lebar profil rangka Maks.: sekitar 85 mm Kedalaman total: sekitar 140 mm Untuk kedalaman profil rangka Maks.: sekitar 80 mm Ukuran sisi: sekitar 85 x 85 mm Ketebalan material: sekitar 5,00 mm Berat per unit: sekitar 1,61 kg Kontak person di perusahaan kami: Bapak: Andre Evering Bapak: Mario Klöver Bapak: Falk Deutsch Informasi umum mengenai produk: Produk ini hanya ditawarkan untuk pengambilan di tempat. Pengiriman atau transportasi produk ini akan dikenakan biaya tambahan, yang dapat dikonfirmasi kepada kami tergantung lokasi pengiriman dan volume pesanan.

Kondisi: siap digunakan (bekas), Diameter meja: 2250 mm Kdedpfx Ajyxb I Tsbxel Diameter ayunan maks.: 2500 mm Tinggi benda kerja maks.: 1600 mm

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang penggilingan: 650 mm, lebar penggilingan: 300 mm, diameter roda gerinda: 160 mm, berat keseluruhan: 2.550 kg, daya: 4 kW (5,44 hp), Brand: CCP - STANKOIMPORT Model: 3E711B Grinding dimensions: 650x300mm (X, Y) - 320mm (Z) Magnetic table surface: 630x200mm Maximum table load: 150kg Distance spindle axis to table surface: 80 - 445mm Maximum wheelhead travel: 365mm Manual table travel: (700mm, 250mm) Table longitudinal feed speed: 2 - 30 m/min Cross feed speed: 0.01 - 1.5 m/min Vertical feed graduation: 0.002mm Micrometric vertical feed graduation: 0.0005mm Cross feed graduation: 0.5mm Micrometric cross feed graduation: 0.001mm Cross travel per handwheel revolution: 5mm Vertical travel per handwheel revolution: 0.20mm Automatic cross feed (longitudinal table stroke): 0.2 - 30mm Automatic wheelhead feed: 0.002 - 0.08mm Grinding wheel dimensions: 250x76x40mm Minimum grinding wheel diameter: 160mm Spindle motor: 4kW Kjdpfx Aeqy H Dpebxedl Weight: 2550 kg.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1989, jam operasional: 2.100 h, Fungsionalitas: berfungsi sepenuhnya, panjang ulir: 880 mm, panjang pemakanan sumbu X: 1.000 mm, panjang umpan sumbu Z: 100 mm, kecepatan pemakanan sumbu X: 1 m/menit, laju pemakanan gandar Y: 5 m/menit, posisi kepala milling: Horizontal, swivelling, tinggi pusat: 1.060 mm, jenis arus masuk: AC (pendingin udara), daya motor pengumpan: 4.000 W, panjang spindle milling: 200 mm, lubang spindel: 90 mm, kecepatan spindel (maks.): 400 rpm, kecepatan spindel (min.): 25 rpm, panjang mandrel: 200 mm, lubang collet: 90 mm, panjang penjepitan: 880 mm, diameter benda kerja (maks.): 500 mm, Gewindefräs- und Wälzfräsmaschine MSZ 5A352ПФ2 Das Modell MSZ 5A352ПФ2 ist eine universelle Gewindefräs- und Wälzfräsmaschine, die für das Bearbeiten von Keilwellen, Schnecken und zylindrischen Zahnrädern mittels Fräs- und Wälzfräsverfahren konzipiert wurde. Baujahr 1984, ist die Maschine für industrielle Anwendungen ausgelegt, die zuverlässige Leistung, Vielseitigkeit und wiederholbare Präzision erfordern. Die Maschine eignet sich für Werkstücke mit einer maximalen Länge von 1.000 mm und einem maximalen Durchmesser von 500 mm. Die maximale Bearbeitungslänge (Verzahnung/Gewinde) beträgt 880 mm. Es können Zahnräder bis Modul 8 gefertigt werden, was ein breites Anwendungsspektrum in der Gewinde- und Verzahnungsbearbeitung abdeckt. Helix- und Steigungswinkel bis 30° sind bearbeitbar, was einen flexiblen Einsatz im Maschinen- und Getriebebau ermöglicht. Die Fräs- und Wälzfrässpindel verfügt über eine Spindelbohrung von 90 mm und nimmt Werkzeuge mit einem maximalen Wälzfräserdurchmesser von 160 mm und einer maximalen Fräserlänge von 200 mm auf. Die Spindel arbeitet in einem Drehzahlbereich von 25 bis 400 U/min und bietet damit passende Schnittparameter für verschiedene Materialien und Werkzeugdurchmesser. Der Hauptantriebsmotor stellt mehrere Leistungs- und Drehzahlstufen zur Verfügung (5 / 6,3 / 10 kW bei 750 / 1.000 / 1.500 U/min). Die Maschine ist mit stufenlos einstellbaren Längs- und Radialvorschüben ausgestattet. Die Längsvorschübe sind von 2 bis 100 mm/min, die Radialvorschübe von 2 bis 50 mm/min regelbar, was eine präzise Steuerung während des Bearbeitungsprozesses ermöglicht. Der Fräskopf ist horizontal und schwenkbar ausgeführt, die Maschine erlaubt eine genaue Synchronisation beim Gewindefräsen und Verzahnen. Mit Gesamtabmessungen von ca. 3.100 × 2.270 × 2.100 mm (bis 3.540 × 2.515 × 2.100 mm mit Zusatzausrüstung) und einem Gesamtgewicht von ca. 7.890–8.500 kg verfügt die 5A352ПФ2 über eine robuste, schwere Konstruktion, die hohe Stabilität und gute Dämpfungseigenschaften gewährleistet. Der Betrieb erfolgt mit Drehstrom (380 V, 50 Hz), die Steuerung erfolgt über ein PU F5007 Steuerungssystem. Kdodpfex Unpvjx Abxel Zustand: *Gebrauchtmaschine *Einsatzbereit *Voll funktionsfähig *Betriebsstunden: ca. 2.100 h Lieferumfang: *Kompletter Satz Wechselräder *Technischer Pass (russisch) *Betriebsanleitung (russisch) Typische Anwendungen: *Gewindefräsen *Wälzfräsen (Stirnräder, Schnecken) *Bearbeitung von Getriebekomponenten *Allgemeiner Maschinenbau *Reparatur- sowie Klein- und Mittelserienfertigung

Kondisi: baru,

Kondisi: bekas, Slotting head for milling machine, milling head, CCCP / USSR STANKO type 1502 No.: 200 Year of manufacture: 1974 Stroke length: max. 60 mm Strokes per minute: approx. 200 - 500 Tool holder: 12 x 17 mm with clamping plate Hole spacing of machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Centering diameter on machine flange plate: 190 mm - Stroke length adjustable via eccentric adjustment - Drive is the same as a standard vertical head, powered by the machine gearbox - Drive via driver, concentric with centering diameter - Degree scale on the flange plate, continuously adjustable +/- 45° Kodpfx Abjd Dk A Aoxjdl - This slotting head is mounted in place of the standard vertical milling head (Installation in place of vertical milling head) Weight: 42 kg Good condition Slotting head stock number 58166 and vertical milling head stock number 58164 from identical STANKO milling machine.

Kondisi: bekas, de-to-other-001 Kedoyv Ivxspfx Abxjdl

Kondisi: sangat baik (bekas), see images; additional extensive clamping devices available! Please contact us if you are interested! Kdjdpfeha U U Rsx Abxol