Beli Stromab Tr 450 bekas (61)

Kondisi: baik (bekas), Tahun pembuatan: 2003, diameter mata gergaji: 450 mm, Nice under-table crosscut saw with two-hand operation and foot switch. Saw blade diameter: 450 mm. Maximum cutting height: 16 cm. Equipped with two roller conveyors. Isdpfx Aowx R Ivob Iea

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 0x0x0 mm Weight: 900 kg Total power requirement: 5 kW Automatic Optimizing Crosscut Saw with Full Optimization TR-450 MATRIX-6000 - Drive motor power: 4.0 kW - Saw blade diameter: 450 x 30 mm Z=72 - Cutting capacity according to cutting diagram - Cutting capacity 95 x 265 mm - Cutting capacity 85 x 277 mm - Cutting capacity 60 x 290 mm - Cutting capacity 40 x 310 mm - Cutting capacity 25 x 330 mm - Cutting cycle: 4 seconds - Pneumatic crosscutting unit - 8° inclined work table - Minimum workpiece thickness 10 mm - Safety cover over crosscutting unit - CE standard - Weight: 900 kg Connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction port: 2 x diameter 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 6 NL - Extraction air velocity at port center: approx. 25-35 m/s Electronically controlled pusher: - Feeding length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servomotor - Feed system with precision rack and pinion, measurement by servomotor - Pneumatic lifting of the pusher at cycle end and overhead return - Photocell for workpiece length measurement Iodpfxov A Hr Tj Ab Isa - Photocell for defect detection – marking with fluorescent chalk - Table inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly via machine control - Up to 1000 cutting lists with 10 dimensions each - One list with 10,000 sequential dimensions possible - 3 optimization options (Maximum length, Sequence, and Workpiece sequence) - 3 optimization options (Volume, minimum waste, and priority) - Standard with USB and Ethernet interfaces - Includes "OPTI" Function for automatic measurement of the workpiece to be cut. Optimum solution for processing material with variable lengths, with single or bundled feeding - 6 optimization options (Maximum length, sequence, workpiece sequence, volume, minimal waste and priority) - Includes “OPTI PLUS” Function for detection of markings, ensuring full optimization and removal of knots and defects. - Marking possible with chalk Options: - Pneumatic side clamp €850.00 - Creation of cut lists on PC €360.00 - Outfeed table €360.00/m

Kondisi: baru, Tahun pembuatan: 2024, 1 Ijdpfxjxraucj Ab Isa

Kondisi: siap digunakan (bekas), Technische Daten Kreissägeblatt Ø 450 mm, 4 kW Leistung 25 x 330 mm, 50 x 300 mm, 100 x 250 mm Nutzbare Schnittlänge 6000 mm, 90 m/min Anhebbarer Anschlag mit Detektionseinheit MATRIX 3 PLUS Steuerung POWER 1000 Datenverwaltung und USB-Anschluss zum Import von Schnittlisten Auslaufrollbahn 3 m Iedpfx Aberaduas Isa Sägen von Holzfliesen, Verpackungen, Paletten, Sparren, Schnittholz Leistung und Motoren Gesamtabmessungen

Kondisi: siap digunakan (bekas), Technische Merkmale Max. Sägeblatt-Ø: 450 mm, Bohrung: 30 mm Motorleistung: 4 kW Drehzahl: 2800 U/min Isdpferadt Dex Ab Isa Schnittkapazität (Höhe x Breite des Holzes): 25 x 330 mm, 50 x 300 mm, 100 x 250 mm Einlauftisch: Ablauftisch: Tigerstop-Anschlag im Lieferumfang enthalten 2 Absaugstutzen Ø 100 mm Ideal geeignet für: Zuschnitt von Holzziegeln, Verpackungen, Paletten, Sparren, Schnittholz Stromversorgung und Motoren Spannung: 380 V Anschluss: Dreiphasig Leistung: 5,5 kW Motor: 7,5 PS Abmessungen Länge: 2100 mm Breite: 1010 mm Höhe: 1210 mm Gewicht: 310 kg

Kondisi: bekas, Tahun pembuatan: 2016, tinggi total: 1.600 mm, panjang total: 14.100 mm, lebar total: 1.600 mm, translate-001 Iedownh N Nspfx Ab Isa

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, ketinggian potong (maks.): 160 mm, lebar pemotongan (maks.): 600 mm, berat keseluruhan: 550 kg, jenis arus masuk: tiga fasa, tegangan masuk: 380 V, diameter mata gergaji: 600 mm, diameter lubang cakram: 30 mm, diameter cakram: 600 mm, Gergaji potong melintang - HIDROLIK STROMAB TR 600 Isdsxz S Dnjpfx Ab Iea Mesin: 7,5 kW, 380 V, 16,5 A Berat: 550 kg Dalam kondisi kerja baik, siap untuk produksi.

Kondisi: bekas, Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 220992, STROMAB TR 500 MATRIX CROSSCUT SAW WITH ELECTRONIC PUSHER – CE STANDARDS – USED - Infeed roller table with 6000mm MATRIX electronic pusher - Outfeed table: 1500mm - Motor: 10 HP - Blade diameter: 500mm - Blade speed: 3500 rpm - Maximum cutting capacity: 360 mm (W) x 55 mm (H) – 200 mm (W) x 135 mm (H) - Minimum cutting section: 20 mm (W) x 10 mm (H) - ELCO CNC control - 415 Volt Isdpfx Abet U I A He Ija - Serial no. 220992 - Year: 2002

Kondisi: bekas, STROMAB TR 500 – Under-table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw featuring a pneumatic saw blade feed and a blade diameter of 500 mm. This machine is ideally suited for precise and efficient crosscutting of workpieces in workshop environments. Year of manufacture: 2009 Machine number: 3229 ——— Technical Data • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Conformity marking: CE mark • Weight: approx. 420 kg ——— Condition & Delivery The machine is in excellent technical condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on pallet via freight forwarder possible at short notice ——— Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus 19% VAT, subject to changes and errors. Ijdpfsxiza Uox Ab Isa

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 0 x 0 x 0 mm Iedpfxsv A Htkj Ab Isa Weight: 1500 kg Total Connected Load: 10.2 kW Automatic optimizing crosscut saw with full optimization TR-600 MATRIX-6000 - Motor drive power: 9.2 kW - Saw blade diameter: 600 x 30 mm Z=60 - Cutting capacity according to cutting diagram - Cutting capacity: 150 x 365 mm - Cutting capacity: 130 x 440 mm - Cutting capacity: 100 x 530 mm - Cutting capacity: 60 x 580 mm - Cutting capacity: 30 x 610 mm - Cutting cycle: 6 seconds - Hydraulic crosscutting unit - Inclined working table at 8° - Minimum workpiece thickness: 10 mm - Safety cover over the crosscutting unit - CE standard compliant - Weight: 1500 kg Connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 4 x diameter 100 mm - Extraction performance: 2400 m³/h - Air velocity at extraction port center: approx. 25-35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servomotor - Feed system with precision rack and pinion, measurement via servomotor - Pneumatic lift of the pusher at the end of the cycle and overhead return - Photocell for workpiece length measurement - Photocell for defect reading – marking with fluorescent chalk - Working surface inclination: 8° - Positioning tolerance: +/- 0.4 mm Control: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly via machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, and workpiece sequence) - 3 optimization options (volume, minimal waste, and priority) - Standard USB and Ethernet interface - Includes "OPTI" Function for automatic measurement of the workpiece to be cut. Optimal solution for processing materials of variable lengths, with single or pack feeding - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes "OPTI PLUS" Function for capturing markings, ensuring full optimization and removal of knots and defects. - Marking with chalk possible Option: - Pneumatic side clamp €850.00 - Creation of cutting lists on PC €360.00 - Discharge table €360.00/m

Kondisi: siap digunakan (bekas), Technical characteristics Hydraulic blade feed Blade Ø 600 mm 12 kW motor, 3000 RPM Two-hand control Usable capacities: Width 610 x Height 30 mm up to Width 420 x Height 160 mm Pressure protection grid MATRIX 2 Usable length 6000 mm Iodst E Efgepfx Ab Ioa Length optimization, automatic cycles 99 programmable cutting cycles 15 programmable measurements per cycle 3 extraction nozzles Ø 100 mm Power and Motors Voltage: 400 V Connection: Three-phase Motor: 16 HP Overall dimensions

Kondisi: bekas, Tahun pembuatan: 2005, tinggi total: 1.750 mm, panjang total: 1.350 mm, lebar total: 1.350 mm, de-hu-001 Iedpfx Abowq U Dxs Ija

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 1377, USED STROMAB TR 500 PNEUMATIC CROSSCUT SAW – CE COMPLIANT - Equipped with TIGERSTOP electronic positioning stop, 4000 mm - Infeed roller table, 4500 mm - Outfeed roller table, 4500 mm - Blade diameter: 500 mm - Maximum cutting capacity: 360 mm (W) x 60 mm (H); 135 mm (H) x 280 mm (W) Iodpfx Abjt U Izpo Ioa - Motor: 10 HP - 415 Volt - Serial No.: 1377 - Year: 2007

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 1000 kg Total power requirement 8.5 kW Automatic optimizing crosscut saw with full optimization TR-500 MATRIX-6000 - Motor drive power 7.5 kW - Saw blade diameter 500 x 30 mm, Z=144 - Cutting capacity according to cutting diagram - Cutting capacity 135 x 280 mm - Cutting capacity 125 x 295 mm - Cutting capacity 95 x 325 mm - Cutting capacity 80 x 340 mm - Cutting capacity 55 x 360 mm - Cutting cycle 4 seconds - Pneumatic crosscut unit - Worktable inclined by 8° Isdpfx Aov A Htdjb Isa - Minimum workpiece thickness 10 mm - Safety cover over cutting unit - CE compliant - Weight 1000 kg Electrical connections: - Supply voltage 400 V / 50 Hz - Control voltage 24 V - Extraction ports 4 x diameter 100 mm - Extraction capacity 2400 m3/h - Air consumption per cycle 4 Nl - Air velocity at extraction port center approx. 25-35 m/s Electronically controlled pusher: - Infeed length: 6000 mm - Pusher speed 90 m/min. - Driven by brushless servomotor - Feed system with precision rack and pinion, position feedback via servomotor - Pneumatic lifting of the pusher at end of cycle and overhead return - Photoelectric sensor for workpiece length measurement - Photoelectric sensor for defect detection – marking with fluorescent chalk - Work surface inclination 8° - Positioning tolerance +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly on machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - 3 optimization options (maximum length, sequential, workpiece sequence) - 3 optimization options (volume, minimal waste, priority) - Standard USB and Ethernet interface - Includes "OPTI": Automatic measurement function for the workpiece to be cut. Optimal solution for processing material of variable lengths, with single or bundle feeding - 6 optimization options (maximum length, sequential, workpiece sequence, volume, minimal waste, and priority) - Includes "OPTI PLUS": Marking detection function for complete optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp €850.00 - Creation of cutting lists on PC €360.00 - Outfeed table €360.00/m

Kondisi: bekas, Tahun pembuatan: 1990, lebar total: 1.100 mm, panjang total: 3.400 mm, tinggi total: 2.450 mm, baujahr-1990-komplett-text Isdewxr Nuepfx Ab Ija

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, Data Umum Tinggi pengukuran: 1200 mm Dimensi Panjang mesin: 20.000 mm STROMAB SL3 laminating press ini diproduksi pada tahun 2019. Mesin ini memiliki area kerja dengan panjang dari 3.000 mm hingga 20.000 mm, tinggi 1.200 mm, dan lebar balok maksimum 200 mm. Dilengkapi dengan tiga silinder vertikal per meter, setiap silinder memberikan gaya sebesar 7.200 kg pada 200 bar. Unit ini juga dilengkapi dengan unit tenaga hidrolik terintegrasi dengan penyesuaian tekanan yang independen. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Ijdpfx Abjxzlrfe Isa Penekanan / Laminasi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Stromab CT600 gergaji. Meja pengumpan 6 m. Ijdpjxzu U Aofx Ab Isa

Kondisi: baik (bekas), de-0239 Isdsxv Su Aspfx Ab Ioa

Kondisi: hampir baru (bekas), pengaturan elektronik sudut kemiringan cakram 90 - 45 derajat lebar potong maksimum 650 mm pengaturan ketinggian gergaji secara elektronik umpan material otomatis panel kontrol layar sentuh laser meja kerja putar 0-345 derajat diameter cakram maksimum 800 mm daya motor 15 KW tahun produksi 2016 penandaan CE Ijdexfr Etjpfx Ab Iea 400 V

Kondisi: baru, Tahun pembuatan: 2021, nomor mesin/kendaraan: MR004301, Press pengeleman manual dengan tinggi maksimal 1800 mm. Harga siap pakai, ex Staphorst. Pengiriman ke lokasi dengan biaya tambahan. Dilengkapi dengan opsi berikut: - Unit tekanan manual di bagian depan Iedpfovcy Emox Ab Ioa Spesifikasi teknis: - Langkah silinder penjepit: 60 mm - Set roda: Ya - Panjang maksimum: 2500 mm - Tinggi maksimum: 1800 mm - Jumlah balok tekanan vertikal: 4 - Maksimal tekanan silinder: 450 kg - Nomor seri: 8877

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 260105, diameter mata gergaji: 800 mm, berat keseluruhan: 2.960 kg, panjang meja: 700 mm, Perlengkapan: Penandaan CE, DETAIL TEKNIS Diameter pisau minimum: 790 mm Diameter pisau maksimum: 800 mm Iedpfx Aboxq Au Aj Iea Diameter pisau poros: 40 mm Panjang meja masuk: 700 mm Panjang meja keluar: 700 mm DETAIL MESIN Daya motor utama: 15,0 kW Dimensi & Berat Dimensi (P x L x T): 3.600 x 2.550 x 2.100 mm Berat: 2.960 kg PERLENGKAPAN Penandaan CE

Tahun pembuatan: 2011, Kondisi: seperti baru (mesin pameran), I am selling an automatic CNC machining center for BLOCK-HOUSE production, model Stromab Autoblox. Year of manufacture: 2011. Brand new machine. Crosscut saw: 600 mm / 7.5 kW Dowel drilling unit: up to dia. 35 mm, drilling depth up to 320 mm Tenoning unit: up to dia. 230 mm / 4 kW Horizontal milling unit: up to dia. 230 mm / 4 kW Isdpfxjgiwkuj Ab Ioa Vertical milling unit: up to dia. 180 mm / 4 kW Automatic feed system: accuracy ±1 mm Ideal for timber construction! Available immediately.

Kondisi: baik (bekas), Tahun pembuatan: 1999, Maximum working area: 3000 x 1600 mm Isdpsg Np Rajfx Ab Ioa Minimum working area: 390 x 420 mm Motor: 2.2 kW Weight: 1500 kg

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 240850, berat keseluruhan: 1.600 kg, panjang kerja: 7.000 mm, rentang penjepitan: 1.350 mm, Dalam kondisi kerja hingga digantikan, tidak digunakan selama bertahun-tahun. Telah disimpan di kondisi kering dalam gudang, pada suhu luar, beberapa bagian berkarat dan memerlukan perawatan. Jika ada pertanyaan jangan ragu untuk bertanya! Iodpfowxvc Sex Ab Isa Panjang maksimal benda kerja 7000mm, tinggi maksimal 1350mm.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, I am selling a Stromab TR350 pneumatic cross-cut saw, year of manufacture 2016. Motor power: 4.0 kW Saw blade diameter: Ø350x30 mm Cutting capacity version 1: max. 210x30 mm Cutting capacity version 2: max. 150x80 mm Infeed table: 1.00 m (extendable) Outfeed table: 1.00 m (extendable) Aluminium profile for stops: total length 2.00 m Iodpfxorzu Ugj Ab Ioa Available immediately. Condition: as new. Weight: 150 kg.