Gergaji potong silang pengoptimalan

STROMAB TR-450 MATRIX-6000

Dimensions (L x W x H): 0 x 0 x 0 mm
Weight: 900 kg
Total power requirement: 5 kW
Automatic optimizing cross-cut saw with full optimization TR-450 MATRIX-6000

- Motor drive power: 4.0 kW
- Saw blade diameter: 450 x 30 mm, Z=72
- Cutting capacity according to cutting diagram
- Cutting capacity: 95 x 265 mm
- Cutting capacity: 85 x 277 mm
- Cutting capacity: 60 x 290 mm
- Cutting capacity: 40 x 310 mm
- Cutting capacity: 25 x 330 mm
- Cutting cycle: 4 seconds
- Pneumatic cross-cut unit
- Work table inclined by 8°
- Minimum workpiece thickness: 10 mm
- Safety cover over the cross-cut unit
- CE compliant
- Weight: 900 kg

Electrical data:
- Supply voltage: 400 V / 50 Hz
- Control voltage: 24 V
- Extraction nozzles: 2 x 100 mm diameter
- Extraction capacity: 2400 m³/h
- Air consumption per cycle: 6 Nl
- Air velocity at extraction nozzle center: approx. 25-35 m/s

Electronically controlled pusher:
- Infeed length: 6000 mm
- Pusher speed: 90 m/min
- Driven by brushless servo motor
- Feed system via precision rack and pinion with measurement feedback from servo motors
- Pneumatic pusher lift at the end of the cycle and upper return
- Photoelectric cell for workpiece length measurement
- Photoelectric cell for defect detection
Dodpfx Aov A Hr Tjirsuu
– Marking with fluorescent chalk
- Working surface inclination: 8°
- Positioning tolerance: +/- 0.4 mm

Control system:
- High-resolution 12” touchscreen monitor (800 x 600 pixels)
- Creation of cutting lists directly in the machine control
- Up to 1000 cutting lists with 10 dimensions each
- A single list with 10,000 dimensions in sequence
- 3 optimization options (maximum length, sequence, and workpiece sequence)
- 3 optimization options (volume, minimal waste, and priority)
- Standard with USB and Ethernet connections
- Includes OPTI function for automatic measurement of material to be cut. Optimal for processing material with variable lengths, for single or bundle feeding — 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority)
- Includes OPTI PLUS function for detection of markings, enabling full optimization and removal of knots and defects.
- Marking with chalk

Options:
- Pneumatic side clamp: €850.00
- Cutting list creation via PC: €360.00
- Outfeed table: €360.00/m

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.