Beli Tabung Poles Mesin bekas (79.800)

Kondisi: baru, Tahun pembuatan: 2024, Drilling machine Kudu with NC control and manual tool change (3-axis). Drilling unit with moving machining head – the table remains stationary, only the drilling head moves. The drilling machine can be operated both manually and fully automatically. After each drilling process, the machining unit automatically moves to the next drilling position on the X- and Y-axis. Operation is extremely user-friendly. Programming is carried out directly at the machine control panel. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,000 mm • Sturdy machine base frame • Drilling head speed: up to 2,800 rpm • Tool holder: HSK 50 • X, Y, and Z-axis powered by servo motors • Rapid traverse speed in X-axis: 18 m/min • Rapid traverse speed in Y-axis: 5 m/min • Distance table top to tool holder bottom: 245 mm • Table width: 450 mm • Working height: 1,005 mm • Drilling diameter: 3–15 mm in St. 50 (tool-dependent) • Y-axis travel: 230 mm • X-axis tolerance: ±0.1 mm/m • Y-axis tolerance: ±0.05 mm • Z-axis tolerance: ±0.05 mm • Machine weight: 2,000 kg • System dimensions: 8,000 mm x 2,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air supply: 8 bar • Front safety via light barrier • Rear access protection, machine guard • Simple on-machine programming • Cooling by minimum quantity spray system • Supplied without material clamps • Digital manual pulse generator Your advantages: Bedpjfu Iwmefx Abkodk • Gentle on workpiece surfaces • Clear, graphical interface • Machining right to the end of the workpiece is no problem • 50% space saving compared to machines with a moving table • Chips collected in chip tray • Easiest programming and operation You are welcome to inspect the equipment at any time in our manufacturing/showroom facility. Please feel free to contact us for an appointment. Plantec Maschinen GmbH

Kondisi: baru, Die ML75 tube grinding machine is the ideal choice for polishing round, oval, and elliptical tubes up to Ø76 mm. Depending on configuration, the machine is available from EUR 9,900. The planetary belt system of the ML75 features a compact design for reworking bent tubes. The machine can be equipped with an automatic feeding system for straight tubes. This new grinding machine is the solution for processing bent tubes with radii that are too tight for the ML100, and with diameters that are too large for the ML50. Polishing of bent tubes with small radii: The planetary belt system of the ML75 features a compact design, allowing maximum flexibility for reworking tubes with tight radii. Bedpjd Hfg Esfx Abksdk Unlike other conventional systems, the planetary belt system reduces friction heat on the tube surface. Straight tubes: The ML75 was designed for processing bent tubes. When equipped with a feeding system, the ML75 can be quickly converted for polishing straight tubes. Technical Data – ML75: Working capacity (Ø mm): 10–76.2 Number of stations: 1 Abrasive belt, dimensions (mm): (2x) 25x860 Abrasive belt speed (m/s): 3–22 Feed speed (m/s): 1–5 Abrasive belt motor (kW): 2.2 Planetary wheel motor (kW): 1.5 Feed motor (kW): (2x) 0.12 Total power (kW): 3.94 Power consumption (A): 10 Dust extraction connection (Ø mm): 80 Dimensions (mm): 750x1000x1300 Weight (kg): 230

Kondisi: siap digunakan (bekas), Parker 80C080 hose crimping press with set of dies No. 241 Suitable hose sizes: 1/4" - 2" Power output: 3 kW You are welcome to arrange an inspection. A proper invoice will be issued. For international customers, we can also provide a net invoice, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see our full range of products. All company names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Technical data deviations and errors in the article description may occur and are subject to change. Bsdpfx Abjlvrlkjkjdk

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jam operasional: 55.000 h, daya laser: 3.000 W, ketebalan pelat baja (maks.): 8 mm, tebal plat aluminium (maks.): 4 mm, diameter benda kerja (maks.): 140 mm, New laser unit in 2021. TECHNICAL DETAILS Material and Workpiece Dimensions Round tube: 12 mm - 140 mm Square tube: min. 12 x 12 mm – max. 120 x 120 mm Rectangular, oval, semi-oval, elliptical tube: min. 10 x 12 mm – max. 140 x 100 mm Standard materials: Steel, stainless steel, aluminum alloys (others on request) Loading and Unloading System Loadable bar length: 3,200 – 6,500 mm Bundle loader capacity: 4,000 kg Unloading length: 3,500 – 4,500 – 6,500 mm Control and Drives Controlled axes with digital drive: No. 8 LT722D – No. 9 LT823D Digital CNC control: Siemens 840D Processing Capability Max. profile weight able to be machined: 15 kg/m Cutting thickness – steel: 8 mm Cutting thickness – stainless steel: 5 mm Cutting thickness – aluminum: 4 mm Laser Laser on-time: approx. 55,000 h Laser unit renewed: 2021 for EUR 55,000 The system is equipped with a Rofin Sinar slab laser from the DC series, offering optimal cutting quality at low consumption due to the following features: - High beam parameter product (K > 0.9 – 0.8) Bodpfxou U Eynj Abkedk - No moving parts, resulting in very low maintenance costs - Minimal gas and power consumption

Kondisi: baru, Tahun pembuatan: 2025, THE PRECISE 3-ROLL BENDING MACHINE The development of the compact and mobile horizontal bending machine focused specifically on producing dimensionally accurate spirals, such as handrails for spiral staircases. This represents the gold standard in bending, as two mutually dependent variables (radius and pitch) must combine in a single process to form a precise geometry. The interaction between pipe calculation on a PC, implementation on the bending machine, and control via measuring devices with subsequent correction of bending values ensures perfectly accurate results. With minimal and simple input into the PC pipe calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for operating the machine. A new powerful drive concept allows variable adjustment of the bending speed and requires only a standard 230 V (single-phase AC connection). Choose between hardened steel tools and surface-friendly hard plastic tools. For optimum feed even with tight bending radii, all three bending shafts are powered. This drive system also proves itself in everyday heavy-duty use for flat work and for bending pipes and profiles. Customers of the bending systems 4800, 5000, and 6000 can purchase the roll bending unit separately without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 bending systems via the bending shaft. Here, the machines serve as the drive unit. POSSIBLE APPLICATIONS: • Handrails/lower rails for spiral staircases • Large-radius pipe and profile bends • General metal fabrication TECHNICAL DATA: • Bending capacity: Ø 10 to 60 mm • Minimum bending radius: 300 mm with Ø 42.4 mm • Right and left bending direction • Digital bending adjustment for radius and pitch Bdjdpfeng A R Sox Abkjk • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • 230 V site-compatible connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller for stabilization • Lift roller for producing controlled pitch • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch via twist measurement • MPW – PC calculation program for determining accurate bending values • RB4303 – Universal bending tool for profiles up to 60 mm height • Tools for custom profiles OUR ON-SITE SERVICE FOR YOU: • Test production demo available in our in-house showroom • Consultation and information session at your location • Leasing/financing options, advice and processing • Service contracts, on-site maintenance

Tahun pembuatan: 1987, Kondisi: bekas, nomor mesin/kendaraan: 34, Grosszugkraft: 10 t Max. Hubhöhe: 1000 mm Schnittgeschwindigkeit: 7,5 m/min Rücklaufgeschwindigkeit: 24 m/min Gewicht: 6,2 t Bdjdpfjnd Dmsx Abkjk Die Maschine ist zum Ausschälen von Rohren geeignet.

Kondisi: baru, Tahun pembuatan: 2024, With the drilling machine (bohrautomat), both manual and fully automatic operation are possible. After each drilling cycle, the system automatically moves to the next drilling position in the X and Y axes as a standard feature. ADVANTAGES Potential operator errors are drastically reduced. Programming takes only a few minutes. Significant reduction of labor requirements. Product details Standard measuring lengths: 3,000 mm 6,000 mm Drilling machine: Unimax 3 T AV (alternative option: Unimax 4 Basic) Continuous drilling capacity in E 335: 25 mm Standard drilling capacity: 30 mm Thread cutting capacity: M 20 Spindle: MK 3 Automatic feed (3T AV): 30 – 400 mm/rev Drilling depth: 125 mm Column diameter: 110 mm Weight: 250 kg Motor, pole-changeable: 0.8/1.5 kW UNIMAX 3T/3T AV M00023/M00009 Infinitely variable spindle speeds Range A: 80 – 1,400 rpm Range B: 180 – 3,200 rpm Motorized height adjustment, anti-twist mechanism Bsdpfxefu Swxe Abkodk Optional: Thread cutting device Fully automatic version Automatic positioning of X-axis Automatic positioning of Y-axis Automatic drilling cycle Total length: 7,500 mm Manual drilling possible Coordinate table with motorized drive for the Y-axis, controlled by the system Travel range, Y-axis: 200 mm Movable clamping table with motorized drive for the X-axis, controlled by the system Travel range, X-axis: 3,000 mm Clamping table with slot for clamping pneumatic clamps and material support blocks 2-axis control with memory system capable of storing up to 3,000 programs Minimum quantity lubrication system with spray head and holder You are welcome to visit the desired system at our production/demo hall at any time. Please feel free to contact us regarding this. Plantec Maschinen GmbH

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2009, jam operasional: 57.480 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Round tube diameter: 12 mm – 220 mm Square tube dimensions: 200 × 200 mm Stainless steel material thickness: 5 mm Steel material thickness: 12 mm Aluminium material thickness: 5 mm Bar and tube handling Bar length: 6,500 mm – 8,500 mm Max. bar weight: max. 35 kg/m Unloader length: 4,500 mm – 6,500 mm – 8,500 mm Laser Laser source power: max. 3,500 W Laser source: DC series SLAB laser by Rofin Sinar Beam quality (K-factor): > 0.9 Maintenance effort: low (no moving parts in the resonator) Gas consumption: reduced Power consumption: reduced Control system CNC control: Digital CNC Siemens 840D Solution Line Loading and unloading system Rear carrier loader: 8,500 mm Front single carrier loader: 8,500 mm Bedpfx Aowakyujbkjdk Unloader: 8,500 mm EQUIPMENT - Collector - Booster - 2 lenses

Kondisi: siap digunakan (bekas), Parker 80 CE 082 hose crimping machine press with crimping dies Power: 1.5 kW Jaw sizes: 1/2" ; 3/8" ; 3/4" ; 1" ; 1/4" You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided you have a valid VAT ID number. Subject to prior sale. Bodpfxeu Hidks Abkjdk Visit our shop and take a look at our other offers as well. Company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the item description may occur and are subject to change.

Kondisi: baru, Tahun pembuatan: 2025, C3T model: Working area: 3048mm x 1524mm Laser output power: 6000W / 3000W / 2000W / 1500W Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 100m/min Max. acceleration: 1G Bdodjg D Nz Ropfx Abkjk 1. Double High-Speed Exchange Tables The fast exchange of two tables significantly increases efficiency. The chain-driven system offers greater rigidity and higher accuracy, saving feeding time. 2. Tenon-and-Mortise Welded Bed Frame Utilizes traditional Chinese tenon-and-mortise structure to enhance load-bearing capacity. Welded joints and the structural support ensure long-term operational stability. The welded frame improves vibration absorption, reducing deviations caused by impacts and enabling more precise cutting. 3. Dual Automatic Self-Centering Electric Chucks The dual electric chucks with automatic self-centering function are easy to operate and low-maintenance. The brand-new motor provides precise control. Independently developed modular chuck components can be quickly replaced. 4. Auto-Focus Laser Cutting Head By setting separate focal lengths for piercing and cutting, cutting precision is improved. Suitable for various focal lengths, with the focal position automatically adjusted according to the thickness of different sheets. 5. Extended Aluminum Beam Aerospace-grade material with increased rigidity greatly reduces beam deformation during high-speed operation, improving high-speed directional sensitivity and processing efficiency.

Kondisi: baru, Tahun pembuatan: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vise. Operation is carried out via a screw-in handle. A lockable setting ring ensures repeatable bending accuracy. Tool exchange is exceptionally simple due to the plug-in system. The principle of “stationary pipe and rotating tool” allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, enabling the production of bends with minimal deformation, e.g. for stainless steel and copper pipes. The optional model with hexagonal drive facilitates not only use in a vise, but also allows the bending device to be powered by the 3000 and 6000 systems. For this, the KBV is simply mounted onto the machine’s bending shaft. POSSIBLE APPLICATION AREAS: • Hydraulic pipework • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limitation • Maximum bending angle of 180º OPTIONAL ACCESSORIES: • KBV with hex drive for bending on model 3000 or 6000 • Machine case • Length stop Bsdpjng Amkefx Abksdk OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our demo room • Consultation and information meeting at your premises • Consulting and processing of leasing/financing purchases via JUTEC • Trade-in of your current machine • Service contracts, maintenance on-site at your location

Tahun pembuatan: 2022, Kondisi: baru, nomor mesin/kendaraan: RPM500_OSZ2, Robotic polishing machine RPM500_OSZ2 Bdsdpfod Dt D Iox Abkok with oscillation (50 mm) and traverse (100 mm) Polishing discs diameter – 1000 mm Drive power – 4 kW Extraction ports – 100 mm Two units available.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1998, nomor mesin/kendaraan: 172, Machine from the insolvency of an automotive supplier – machines are currently still in operation! Weight: 1 t Motor power: 6.5 kW Further details as provided by the manufacturer – subject to change Continuously adjustable front roller gap: 200 – 1000 mm Number of driven rolls: 3 Drive type: Electric motors Maximum rotational speed: 22 rpm Roll height: 300 mm Torque: 1,600 Nm Bjdpfx Absv Nhimjksdk Double-sided operation: rolling in front, edging at the back Length: 1.6 m Width: 1.3 m Height: 1.4 m Weight: 1.2 t

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, Manual length and angle positioner for 6000 mm pipe length The bending capacity can be found in the attached technical documentation in PDF format. Bodpfxjv Tz S Ao Abkedk

Kondisi: baik (bekas), Tahun pembuatan: 2022, jam operasional: 6.099 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6500014216, Rentang pemotongan baja bulat pada 90°: 240 mm, Rentang pemotongan baja bulat pada 45°: 240 mm, rentang pemotongan baja sudut pada 90° (sumbu X): 180 mm, rentang pemotongan baja sudut pada 90° (sumbu Y): 180 mm, rentang pemotongan baja siku pada 45° (sumbu X): 180 mm, rentang pemotongan baja sudut pada 45° (sumbu Y): 180 mm, jenis arus masuk: tiga fasa, panjang total: 14.000 mm, Kisaran pemotongan baja persegi pada 90°: 180 mm, Rentang pemotongan baja persegi pada 45°: 180 mm, panjang umpan sumbu Y: 7.500 mm, tinggi produk (maks.): 12 mm, en_Bodor T230-650CE Tube Laser 4kW Laser power: 4kW Bdsdovvlbtepfx Abkek For tubes and profiles 7500mm length × 20-240mm round diameter 7500mm length × 20mm-180mm square Automatic loading 3000-6200mm 2½D laser head Offered for sale due to upgrade to 3D machine The machine can always be viewed in operation.

Kondisi: baru, Tahun pembuatan: 2025, K110 K230 K360 模型 工作范围：8649×1398×1811mm 至 10000×3500×2100mm 激光输出功率：3000w/2000w/1500w/1000w X/Y 轴定位精度：0.05mm X/Y 轴重复定位精度：0.03mm X/Y 轴最大联动速度：60m/min 1. 一体化全防护罩 一体化全防护罩设计，安装到位，大大缩短安装时间。 2. Bodor Genius T 针嘴自动调焦激光头 Bodor Genius T 针嘴自动调焦激光头，适用于各种管材，如角钢、槽钢、工字钢等。 3. 矩形管焊接床身 结构简洁，布局灵活。 4. Bodor Thinker 3.0 系统 专为管材切割机研发的专用控制系统，集成最先进技术，可直接对角钢、槽钢进行切割，无需排样和回原点。 5. 适用更小夹持直径 后夹爪可将管材通过前卡盘，大大缩短切割头与后夹爪之间的物理距离。尾料长度缩短至 70mm，材料利用率提高至 99%。 Bdsdpfeg Rgt Uox Abkok 6. 人体工学设计 双侧上下料与操作；人性化交互界面，操作便捷流畅，带来极佳用户体验。 7. 一体化设计 电控柜与主机一体化设计，节省占地空间，规范线路安装。

Kondisi: baru, Tahun pembuatan: 2025, THE HIGH-PERFORMANCE MOBILE BENDING MACHINE: The compact, mobile design enables precise and repeatable bending both in the workshop and directly on-site, for tube diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive performance. The motor speed is automatically adjusted, allowing for faster reverse operation and reduced cycle times. Position detection directly on the bending axis delivers optimal bending accuracy and excellent repeatability. The bending angle can easily and quickly be set to 0.5° using push buttons. The large LCD display clearly shows the angles. Up to three bending angles can be saved, allowing efficient bending of tubes with varying requirements. For transport, the compact unit and accessories can be safely and neatly stored in sturdy transport cases. The “stationary tube, rotating tool” principle minimizes space requirements during bending. When working with thin-walled tubes, sliding shoes are used to ensure wrinkle-free bending and to create curves with minimal deformation in, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square, and round bars can also be bent with ease. POSSIBLE APPLICATIONS: • Hydraulic tubing • Prototype construction • Plumbing and heating installation • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment 0.5° • Maximum 180° bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for rapid tool change • Safety foot switch with emergency stop function • 230 V AC connection • Weight 29 kg • Frequency converter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • PB20 profile bender – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod base • Machine case • Tool case • Small bending device KBV • Special tools on request Bsdpjnfvx Nefx Abkjdk OUR SERVICE: • Welcome to test production on-site in our demonstration area • Consultation and information meetings at your premises • Leasing/financing options available via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance available

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2020, nomor mesin/kendaraan: PM_1000, Used polishing machine for manual processing. Drive power: 5.5 kW Bsdpfxefiugus Abksdk Polishing discs diameter: 1000 mm

Kondisi: baru, Tahun pembuatan: 2025, 1. Effektive Rohrlänge für den Schnitt: 6.500 mm / 9.200 mm Laserleistung: 6.000 W / 3.000 W / 2.000 W / 1.500 W Effektiver Schneiddurchmesser Rundrohr: Ø20–230 mm Effektiver Schneiddurchmesser Vierkantrohr: 20×20 mm – 160×160 mm Kantenlänge: 20–170 mm Außendurchmesser: ≤230 mm Zertifikate: CCC, CE, GS, ISO, SGS Laserquelle: IPG/MAX Garantie: 3 Jahre Stromversorgung: 110V/220V/380V, 50Hz/60Hz 1. Überragende Kapazität Der maximale Schneiddurchmesser der T-Serie ist 30 % größer als bei marktüblichen Maschinen; das maximale Schneidgewicht liegt 100 % über dem marktüblichen Standard. Bdsdpfx Abjg Rgucekjk 2. Spannfutter-Positionskontrolle, Drehmomentregelung Das CNC-selbstzentrierende Spannfutter mit firmeneigenem Patent kann das Werkstück automatisch entsprechend der eingegebenen Rohrabmessungen spannen. Die Positionsüberwachung im Drehmoment-Modus garantiert, dass dickwandige Rohre sicher gespannt bleiben und dünnwandige Rohre nicht verformt werden. Neues staubgeschütztes Design für langanhaltenden, störungsfreien Einsatz. 3. Kanten- und Mittelpunktfindung Neue Funktion zur automatischen Kanten- und Zentrumserkennung. Die optimierte Kantenfindung und der verbesserte Algorithmus gewährleisten höchste Schnittpräzision und -stabilität.

Kondisi: baru, Tahun pembuatan: 2025, PROFIL BENDING ATTACHMENT PB20 The ideal supplement for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be mounted quickly and easily onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping device and pulled around the bending tool. With this system, the length of the legs to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy during bending. TECHNICAL DATA: • Bending capacity (Steel 37): 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radii R2 or 5 mm Bedpfxenh R Eks Abkjdk • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production in our in-house demo room • On-site consultation and informational meeting at your location • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your facility

Tahun pembuatan: 2016, Kondisi: baru, nomor mesin/kendaraan: 16-PMME-01, A single-sided polishing machine for manual processing and polishing of parts made of aluminium, steel, stainless steel, brass, and zinc die-cast is being offered for sale. Technical Data: Polishing wheel: max. Ø 450 mm Spindle diameter: 35 mm Polishing wheel width: max. 50 mm Height to polishing spindle: 1,100 mm Extraction port: Ø 100 mm Dimensions (LxWxH): 600 x 600 x 1,500 mm Weight: approx. 150 kg Connection voltage: 3 x 400 V Connected load: 4 kW Made in Germany Bjdpjc Rwngsfx Abkodk Warranty: 12 months Optional: An upgrade with a frequency inverter will cost 950 euros per polishing machine. Includes: 1 frequency inverter, 1 potentiometer for control, 1 main switch.

Kondisi: baru, Tahun pembuatan: 2025, THE COST-EFFECTIVE MANDREL BENDING MACHINE FOR TIGHT BENDING RADII This bending system provides solutions for complex geometries with standard radii of 2xD for tube dimensions ranging from 20 to 90 mm. Depending on the material quality and wall thickness ratio, radii of 1.5xD can also be reliably achieved in serial production. With a tool height of 120 mm, there is ample capacity for special profiles as well. The highly precise and powerful electric drive of the bending axis, along with the robust and rigid design of the mandrel support and bending arm, contribute to the desired bending results. The plug-in bending tools enable quick changeovers to other tube sizes. The clamping force for tube fixation is fully adjustable. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store virtually unlimited programs for bend angle, length, and twisting angle for up to 50 bend sequences per tube length. A freely programmable database for up to 200 materials is available to monitor springback values. The control offers two operating modes: In "Simple Bending", the length and angle of the bends are automatically displayed relative to each other. In the "Controlled Bending" mode, the data is stored beforehand and a permanent target/actual comparison is conducted during the bending process. Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. POSSIBLE APPLICATIONS: • Plant construction, e.g., chemical industry • Hydraulic piping • Metal fabrication • Prototype construction • Pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Bending radius min/max: 40 mm / 250 mm • Minimum bending radius: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control; bend angle adjustment (0.1°) • Mandrel support lengths: 3000/4500/6000 mm • Maximum 180º bend result • Weight: 1600–3200 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Larger bending radius up to 300 mm • Length and twist positioning via automatic braking function or manual stops using foot switch • Semi-automatic length and twist positioning via servo motors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information session at your location • Advice and acquisition via leasing/financing purchase through JUTEC • Trade-in of your current machine Bdodpfxenh R Sue Abksk • Service contracts and on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 1018, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine, featuring manual quick-release excenter clamping for tube fixation, enables efficient bending processes. The compact drive unit with a removable mandrel holder offers advantages for on-site assembly. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle is easily and quickly set via a user-friendly touchscreen control with menu-guided interface. The advanced control system allows for two speeds and a programmable overbend function to compensate for material springback. The bending cycle time is significantly reduced thanks to the automatic "retract" function at the end of the bend. For complex bending tasks, programs can be saved, supporting sequences of up to 50 bends per geometry. An almost unlimited number of programs, as well as up to 200 materials, can be stored on the controller or via USB stick. The plug-in bending tools enable rapid changeover to other tube sizes. For challenging geometries, the machine’s bending direction can easily be reconfigured for standard right or left bending. The open bending unit allows, for example, the bending of railing frames with only one weld seam. Optional PC-based calculation software provides cut length calculations for the entire geometry as well as feed, twist, and bending angles for each bend. The mandrel retraction is programmable and can be actuated automatically before reaching a preset bending angle. POSSIBLE APPLICATION AREAS: • Plant engineering, e.g. chemical industry • Hydraulic pipework • Prototype construction • Pipeline construction TECHNICAL DATA: • Bending capacity: Ø 6 to 50 mm • Min/max bending radius: 10 mm/140 mm • Bending radii: 2 x D • Multifunctional machine control, bend angle adjustment (0.1° increments) • Mandrel holder lengths: 1500/3000/4500/6000 mm (special versions available upon request for longer lengths) Bdodponfvy Uofx Abkjk • Maximum bend angle: 180º • Weight: 300–500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimum quantity) • Digital measurement for length and rotation (resolution 0.1) • Remote operation of all functions via traversing unit (rotation and length stop) • Bending radius up to 250 mm • PC-based tube calculation software OUR SERVICES: • Welcome to testing and trial production in our in-house demo room • On-site consultation and information discussion • Consulting and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries to right and left bending. The plug-in bending tools allow for quick changeover to different tube sizes. Fast hydraulics shorten auxiliary times, which is a crucial factor for serial production. The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angles, length measurements, and rotation angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine features two operating modes: In 'simple bending' mode, the length and rotation of the bends relative to each other are displayed automatically. In 'controlled bending' mode, the data is preset, and during bending, a continuous actual/target comparison is performed. This eliminates mispositioning within a tolerance window, minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early upon reaching the bending angle. Bdjdondn Agopfx Abksk The compact drive unit with detachable mandrel carrier offers advantages for on-site assembly as well as for special designs with very large tube feed, and is also available as a stationary version with an organizing system for tools and mandrel bars. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering, e.g. for chemical industry • Metal construction • Prototype construction Technical data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Min/max bending radius: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control, bending angle setting (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special lengths available) • Maximum 180º bending angle • Weight: 600-700 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-action chuck • Positioning of length and rotation via automatic braking function or manual stops using the foot switch • Semi-automatic positioning of length and rotation via servomotors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for supervision of tool clamping • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome for test production at our facility in the demo room • Consultation and information session at your location • Leasing/financing purchase consultation and handling via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, THE COST-EFFECTIVE TUBE BENDING MACHINE FOR TIGHT BEND RADII: This bending machine, equipped with a free-standing bending head, can be easily converted for right- or left-handed bending, making it ideal for handling complex geometries. The plug-in bending tools allow for quick changeovers to accommodate different tube diameters. A high-speed hydraulic system reduces non-productive times—an essential factor for series production. Clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bend angles, lengths, and rotation angles for up to 50 bends per tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine features two operating modes: In "Simple Bending," the length and rotation of the bends relative to each other are displayed automatically. In "Controlled Bending" mode, the bending data is preset, and a continuous target/actual comparison is performed during bending. This minimizes user-dependent error rates by eliminating mispositioning within a tolerance window. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically retracted early upon achieving the desired bend angle. The compact drive unit with detachable mandrel support offers advantages on site, especially for custom constructions with very large tube feed lengths. It is also available in a stationary version with an integrated storage system for tools and mandrel rods. An economical alternative to fully automated CNC machines. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • System engineering, e.g. chemical industry • Metal construction • Prototyping Technical data: • Bending capacity Ø 6 to 50 x 4 mm, depending on material • Minimum/maximum bending radius: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control with bend angle setting (0.1°) • Mandrel support lengths: 1500/3000/4500/6000 mm (special versions available in longer lengths) • Maximum bending angle: 180º • Weight: 800-900 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-change chuck • Automated or manual (via foot switch) positioning of length and rotation with brake function • Automatic length and rotation positioning via servomotors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for checking clamping force • 10" touchscreen with integrated tube calculation • Bending radius up to 250 mm Bjdong Exajpfx Abkjdk • Data transmission via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Welcome to test production in our in-house demo room • Consulting and information session at your location • Consulting and transaction possible as leasing/financed purchase through JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance