Beli Tbm bekas (33)

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2011, jam operasional: 34.797 h, nomor mesin/kendaraan: 2011-0250, Diameter pipa (maks.): 600 mm, Panjang pipa (maks.): 1.500 mm, Sudut pembengkokan (maks.): 180 °, radius pembengkokan (maks.): 200 mm, ketebalan dinding: 3 mm, Original machine built in 1996. In 2011, the unit was comprehensively overhauled by the OEM for approximately €250,000: extensive renewal of both the electrical and mechanical systems. TECHNICAL DETAILS Tube diameter: 16 – 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 – 200 mm Tube feed length: 1,500 mm Bending angle: max. 180° + springback Tube length: 400 – 1,500 mm Tube outer diameter: 28 mm – 60 mm Material Parameters Tensile strength stainless steel: max. 750 N/mm² Tensile strength mild steel: max. 450 N/mm² Performance limit (steel): Ø 60 x 3 mm Performance limit (stainless steel): Ø 57 x 2 mm Motion Data Bending direction: left Nwsdpfsx Srklsx Abueb Forward bending speed: max. 22.0 rpm (infinitely variable) Return bending speed: constant 22.0 rpm Twist angle: max. 360° Twist speed: 50 rpm Multi-radius height adjustment: lowest tube center 55 mm Height adjustment travel: suitable for 3-groove bending tools MACHINE DETAILS Overrun time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control desk (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance Data Total power requirement: 55 kW Hydraulic reservoir capacity: 340 l Control System Bending planes: up to 6 (CNC programmable) Positioning system: NTB design Control unit: Schwarze-Robitec operating and control panel FEATURES - Automatic cold pipe bending machine - Pipe positioning device - Gripper - Schwarze-Robitec tube magazine - Hydraulic operation for bending table, tool clamping, guide rail, mandrel retraction, reinforced guide rail feed and return - Various bending tools for Ø 60 mm tube - Various accessories - Control cabinet cooling unit - Foot switch (dual) - Schwarze-Robitec control panel - Rittal control cabinet cooling unit type SK 3361100 Note: The machine could only be tested in setup mode due to lack of operator knowledge. No faults are known. The machine is currently dismantled.

Tahun pembuatan: 2019, Kondisi: sangat baik (bekas), de_to_hu_it_lt_lv_nb_nl_pl Nwsdpjxd T D Isfx Abusb

Kondisi: siap digunakan (bekas), ATB motor – 400V / 2840 RPM / 6.4 / 11 A – IP54 / 50Hz with pump – length: 120 cm, used, normal signs of wear, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packaging and shipping! Nwedpfx Abjrtirzjusb

Kondisi: siap digunakan (bekas), ATB motor – 400V / 2860 RPM / 11 A – IP54 / 50Hz with pump – Length: 127 cm, used, normal signs of use, 100% functional, scope of delivery as per photos. PLEASE NOTE: Packaging and shipping costs to be enquired separately! Nwjdpfx Aberwtmzeuob

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, diameter pembubutan di atas alas geser: 1.240 mm, diameter pembubutan di atas carriage atas: 980 mm, panjang pembubutan: 3.000 mm, 756aa6c7 Nsdpfxsx Di Rqe Abuswb

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1970, Torwegge multi-blade saw after complete overhaul. Equipped with two lasers, regenerated chain, bearings, electrics. Machine ready for operation. Nodpfxsu U Dmas Abujwb

Kondisi: sangat baik (bekas), Tahun pembuatan: 1996, lubang spindel: 160 mm, Drehdurchmesser Bett Ø 1040 mm Drehdurchmesser Schlitten 710 mm Drehdurchmesser Grube Ø 1580 mm Drehlänge Nwodoxtbf Ejpfx Abusb 3000/4500 mm Grubenlänge 1500 mm Spindelbohrung 160 mm Leistung Spindel 40 kW Bettbreite 800 mm Spindelaufnahme 6 Mk Werkstückgewicht 3500 Drehzahl 800 Rpm Vorschub X - Achse 10000 mm/min. Vorschub Z- Achse 10000 mm/min.

Kondisi: sangat baik (bekas), - Digital display. - Accessories included. Working Area Centre height: 520 mm Distance between centres (closed bed): 2,000 mm Distance between centres (open bed): 3,200 mm Swing clearance width with bed fully extended: 1,200 mm Swing diameter over cross slide: 710 mm Swing diameter over bed: 1,040 mm Swing diameter in gap: 1,780 mm Headstock Spindle bore: 132 mm Spindle diameter at front bearing: 240 mm Spindle nose: D1-11” Camlock Torque: 1,100 Kgm Bed and Carriage Bed width (“Meehanite” casting): 600 mm Guideway length for carriage: 900 mm Nwjdsikfbdjpfx Abujb Cross slide width: 420 mm Cross slide length: 1,050 mm Cross slide travel: 770 mm Top slide width (rotary): 270 mm Top slide length (rotary): 650 mm Top slide travel (rotary): 400 mm Tailstock Quill diameter – with drive: 130 mm Quill taper: 6 MT Quill travel: 300 mm Miscellaneous Max. faceplate load with centre of gravity at 200 mm: 2,500 kg Max. load between centres: 4,500 kg Fixed steady rest through-hole: 200 – 500 mm Coolant pump (75 l/min): 0.2/0.15 HP/kW Overall length: 4,500 mm With bed extension: 5,700 mm Height: 1,550 mm Weight: 9.1 t

Kondisi: baik (bekas), Tahun pembuatan: 1987, diameter putar di atas sled silang: 810 mm, lubang spindel: 130 mm, diameter pembubutan: 1.140 mm, panjang pembubutan: 7.500 mm, gores kuas bulu: 300 mm, panjang total: 7.500 mm, lebar total: 2.300 mm, tinggi total: 1.650 mm, lebar tempat tidur: 600 mm, Please note: these are not original pictures; the machine length is only 3000 mm, not 5000 mm. 3-guideway bed construction 2-axis Heidenhain digital readout Power feed in 3 directions, all tool post slides Central lubrication system Max. workpiece weight, flying in chuck: 2,500 kg Max. workpiece weight, not supported: 8,500 kg Max. workpiece weight, supported: 10,000 kg Optional 4-jaw chuck approx. 1,200 mm Optional 4-jaw chuck approx. 1,500 mm Optional package with 3 fixed steady rests, model from ... to ... Turning length: 5,000 / 7,500 mm Swing over bed Ø: 1,140 mm Swing over cross slide: 810 mm Swing over gap Ø: 1,500 mm Nwodpjv S Dp Ijfx Abujb Gap length: 2,500 mm Spindle bore: 130 mm Bed width: 600 mm Quill diameter: 130 mm Quill stroke: 300 mm Spindle taper: 6 Mk Power: 25 kW Spindle speed: 9 – 900 rpm Length: 7,500 mm Width: 2,300 mm Height: 1,650 mm Weight: 12,000 kg

Tahun pembuatan: 2025, Kondisi: baru, Automatic packaging machine for filling and packaging tea into double-chamber tea bags. Includes volumetric doser and labeling system for attaching the thread with label. Labeling is carried out on both sides (label-thread and thread-bag) using a staple. Double-chamber bag is formed by cold sealing. Device for grouped bag dispensing. PLC controlled, operated via touch monitor. - Specifications: max. machine cycle rate (idle): 130 cycles per minute; dosing volume: max. 10cm³ (adjustable); hopper capacity: 13dm³; accuracy: ±5%; tea bag dimensions LxW: 40x60 / 45x60mm; tea bag material roll width: 94 / 103mm; suitable tea bag material: 12.5g/m², suitable for cold sealing; label (LxW): 28x32mm; thread length: 148mm (±5mm); diameter of metal staple material: 0.5mm; power supply: 220/380V; power consumption: 10kW; required compressed air: 0.6 MPa; compressed air consumption: 300l/min; machine dimensions LxWxH: 3500x1500x2400mm; weight: 4250kg. Nedpfx Abev Nm S Touewb

Kondisi: baru, Tahun pembuatan: 2025, Automatic packaging machine for filling and packing tea in double-chamber tea bags. Includes volumetric dosing unit and labelling system for attaching the thread with label. Label application occurs on both sides (label-thread and thread-bag) with a staple. Formation of the double-chamber bag is achieved by cold sealing. Equipped with a device for grouped bag discharge. PLC-controlled, operation via touch monitor. - Specifications: max. machine cycle rate (no load): 130 cycles per minute; dosing volume: max. 10cm³ (adjustable); hopper capacity: 13dm³; accuracy: ±5%; tea bag dimensions (LxW): 40x60 / 45x60mm; tea bag material roll width: 94 / 103mm; suitable tea bag material: 12.5g/m², cold-sealable; label (LxW): 28x32mm; thread length: 148mm (±5mm); metal staple material diameter: 0.5mm; power supply: 220/380V; power consumption: 10kW; required compressed air: 0.6 MPa; compressed air consumption: 300l/min; machine dimensions (LxWxH): 3500x1500x2400mm; weight: 4250kg. Nsdpfx Absv Nlhgeuewb Please note that our new machine prices are often below typical used equipment prices. Please feel free to enquire and tell us about your packaging requirements. – We usually have 30-50 different new machines in stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. – All machines are available with full warranty.

Kondisi: baru, Tahun pembuatan: 2025, Automatic packaging machine for filling and packing tea into single-chamber tea bags. Includes volumetric doser and labelling system for attaching the string with label. Labelling system: In the standard version, the label is folded and glued together with the inserted string. Optionally, a heat-sealing module is available for this production step. String attachment method for tea bags: by heat-sealing into the edge of the tea bag. The filled tea bags are output stacked, e.g., into a tray or into an already erected tea packaging. - Specifications: Max. machine cycle rate (idle): 120 cycles per minute; dosing volume: max. 6cm³; tea bag dimensions LxW: 62.5x50mm; tea bag material roll width: 125mm; suitable tea bag material: 16.5–20g/m², single-sided heat-sealable; label dimensions (LxW): 28x24mm; string length: 210mm; output stack quantities: a) 25 / 50 / 100 b) 30 / 60 c) 20 / 40; power supply: 380V; power consumption: 1.5kW; machine dimensions LxWxH: 1700x900x2000mm; weight: 640kg. Please note that our new machine prices frequently undercut standard used equipment prices. Feel free to enquire and let us know your packaging requirements. – We generally have 30–50 different new machines available from stock for immediate delivery. For customer-specific machines, we offer very short lead times starting from approximately 3 weeks. – All machines are available with a full warranty. Nedpfx Aev Nlikebujwb

Tahun pembuatan: 2025, Kondisi: baru, Automatic packaging machine for filling and packing tea into single-chamber tea bags. Includes volumetric doser and labeling system for attaching the string with tag. Labeling system: In the standard version, the tag is folded and glued together with the inserted string. Optionally, a heat-seal module is available for this production step. Method for attaching the string to the tea bag: By heat sealing into the edge of the tea bag. The output of the tea bags is stacked, e.g., in a tray or in a pre-erected tea package. Specifications: - Max. machine cycle rate (idle): 120 cycles per minute - Dosing volume: max. 6cm³ - Tea bag dimensions (LxW): 62.5x50mm Nwsdpfxjv Nm R Ao Abuob - Roll width for tea bag material: 125mm - Suitable tea bag material: 16.5–20g/m², single-side heat-sealable - Tag dimensions (LxW): 28x24mm - String length: 210mm - Output stack sizes: a) 25 / 50 / 100 b) 30 / 60 c) 20 / 40 - Power supply: 380V - Power consumption: 1.5kW - Machine dimensions (LxWxH): 1700x900x2000mm - Weight: 640kg.

Kondisi: bekas, Tahun pembuatan: 1976, diameter putar di atas sled silang: 470 mm, lubang spindel: 130 mm, panjang pembubutan: 1.500 mm, gores kuas bulu: 300 mm, diameter quill: 130 mm, lebar tempat tidur: 600 mm, kecepatan rotasi (maks.): 600 rpm, penjepit rumah spindel: MK 6, Manufacturer: EST Ticino Model: ET-BM 400 Turning length: 1,500 mm Swing over bed Ø: 800 mm Swing over cross slide: 470 mm Swing in gap Ø: 400 mm Gap length: 750 mm Spindle bore: 130 mm Spindle power: 15 kW Bed width: 600 mm Quill diameter: 130 mm Quill stroke: 300 mm Spindle mounting: 6 Morse taper Spindle speed: 600 rpm Nwjdpfsw Ewarsx Abueb Dimensions (approximate): Length: 4,500 mm Width: 1,800 mm Height: 1,800 mm Weight: 5,200 kg Includes accessories: - Safety equipment - Face plate, four-jaw chuck, clamping jaws, tool holder, centers, drill chuck, tools Please submit inquiries only via email. All information provided to the best of our knowledge. Subject to change and errors. This offer is directed exclusively at entrepreneurs as defined by § 14 BGB. Sale is made under exclusion of any warranty. The exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of obligations by the seller, or for injury to life, body, or health. For more information, please visit the website of Witzenmann GmbH under the headings "Legal Notice", "Terms and Conditions", and "Data Protection".

Kondisi: bekas, Fungsionalitas: belum diuji, Ferwood code: RU0005378 - Manufacturer code: TBM 1.2-40-W1-220 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service; please contact us. Nedpfx Abjwnpffeuowb

Kondisi: bekas, Fungsionalitas: belum diuji, Ferwood Code: RU0005378 - Manufacturer Code: TBM 1.2-40-W1-220 - Condition: Used - Functionality: Not tested. If interested, we offer overhaul/refurbishment services; please contact us. Nwjdpfjv Efkyex Abusb