Beli Tekan Rolls bekas (10.505)

Kondisi: baru, Sheet thickness: 1.8 mm Bending length: 2050 mm Top roller diameter: 95 mm Technical specifications: - Cast iron frame - Manual or motorized (optional) bending - After bending, the top roller can be swung out to easily remove the material - Cone bending device - Rear and bottom rollers can be raised and lowered manually with handwheel Ksdsd Ab Tvjpfx Adwjnd - Portable control panel - In compliance with CE standards Options: - Motorized rear roller EURO 825 - Digital display for rear roller position EURO 1,010 - Body cover EURO 432 - Hardened rolls EURO 940 We have an extensive list of references!

Kondisi: baru, Sheet length: 3100 mm Sheet thickness: 10.0 mm Pre-bending: 8.0 mm Total power requirement: 11.0 kW Approx. weight: 9.7 t Dimensions (L x W x H): 4.88 x 1.16 x 1.18 m Illustration similar Kjdjd Ab H Eepfx Adwend Bending capacity: 10.0 mm » at 3x top roll diameter Pre-bending: 8.0 mm » at 1.5x top roll diameter Top roll diameter: 270 mm Bottom roll diameter: 250 mm Side roll diameter: 220 mm Max. opening: 50 mm Working height: 825 mm • Fully hydraulic drive of top and bottom rolls via planetary gear • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic side roll adjustment synchronized via PLC • Hydraulic bottom roll adjustment via torsion shaft • Pressure-adjustable bottom roll • Electric and hydraulic overload protection • Movable control console • Operating manual in GERMAN and ENGLISH • Machine and equipment compliant with CE regulations Important notes for conical rolling: • Maximum sheet thickness is 50% of the nominal capacity • Cone length must not exceed 30% or must be more than 60% of the roll length • Hardened rolls recommended

Kondisi: baru, Sheet length: 2050 mm Sheet thickness: 3 mm Total power requirement: 2.2 kW Weight approx.: 1,500 kg Knodjd Ab H Aopfx Adwsd Dimensions (LxWxH): 3,200 x 750 x 1,000 mm Technical Data Roller diameter: 130 mm Features • 3 rollers • Asymmetrical roller configuration with pre-bending • 2 driven rollers via brake motor • Swiveling top roller to the front • Forward/reverse operation • Cone rolling by tilting the rear roller • Mobile control console Operating manual in GERMAN Catalog available at the following link:

Kondisi: baru, Sheet length: 2530 mm Sheet thickness: 6 mm Bending: 5 mm Total power requirement: 5.5 kW Approx. weight: 3750 kg Dimensions (LxWxH): 4250 x 1200 x 1250 mm Roll diameter: 190 mm • 3 rollers • Asymmetrical roller arrangement – with pre-bending • Swiveling top roller to the front • Motorized right-left control • Conical bending by tilting the rear roller • Operated by foot pedal Kjdpsd Ab E Usfx Adwend • Hardened rollers • Digital display (Sample photo) Catalog available at the following link:

Kondisi: baru, Sheet length: 2100 mm Kjdowhtdfopfx Adwsnd Upper roll diameter: 140 mm Sheet thickness: 4 mm Lower roll diameter: 140 mm Length: 4000 mm Height: 1040 mm Width: 1140 mm Approx. weight: 2240 kg Technical data: - Hardened and polished rolls - Complete body made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically driven top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls are driven by hydraulics and gearbox - Vertical movements of the lower roll are hydraulically driven - Mobile control panel - In compliance with CE standards Options: Central support: €6,479 Side supports: €4,055 CNC control: €8,670 Material feed table: €3,258 Variable speed control: €4,109 Automatic material discharge PLC control CNC control Automatic material loading system Interchangeable top roll Adjustable lower roll support system (customizable to customer requirements) We have numerous references!

Kondisi: bekas, de-to-hu-it-lt-001 Kodpswiatpefx Adwjnd

Kondisi: bekas, Bending length: 3100 mm Knjdpforu Unbex Adwjd Pressing force: 80 t Motor power: 5.5 kW

Kondisi: baru, Pressure: 320 Bending length: 3020 mm Frame width: 2555 mm Installation height: 650 mm Stroke (max.): 400 mm Throat depth: 450 mm Dimensions (LxWxH): 3785x2290x3100 mm Weight approx.: 14,450 kg 4 axes (Y1, Y2, X, R): Yes, all axes via CNC control Delem DA 66 T (2D graphical control) CNC crowning via control: Yes, via CNC control Delem DA 66 T (2D graphical control) Motor power: 30 kW Standard Equipment: KK Kletzer Europa We have put together a high-quality model for Europe. The CNC press brake KK-Industries Made in Turkey. Model KKI EUROPA XL The powerful press brake EUROPA XL is characterized by its high precision, accuracy, and versatile applications. Europa XL has a very large installation height, resulting in a large stroke (cylinder travel). The throat depth is also above average, allowing for minimal restrictions. We focus on quality, which is also reflected in the control system. Kjdpfx Ajh Rwydsdwond As standard, we use the high-end Delem DA 66 T (2D graphical control). Furthermore, the KKI Europa XL press brake is equipped with CNC axes Y1, Y2, X, and R, all programmable via the control. Of course, CNC controlled crowning (DELEM DA 66 T 2D graphical control) is included as well. There are no compromises when it comes to the upper tool and die; the KKI EUROPA XL CNC press brake is fitted with high-quality tools from EUSTAMP Italy. Naturally, a machine is only as good as its service, which is why we place great emphasis on highly qualified staff with many years of experience in CNC sheet metal processing. CNC axes: Y1, Y2, X, and R Control: DELEM DA 66 T (2D graphical control) Backgauge with double linear guide and ball screw Motorized crowning with CNC control Heavy-duty height adjustment with handwheel on linear guide 3 stop fingers Installation height 650 mm Throat depth 450 mm Stroke 400 mm Laser safety device on upper beam CE safety equipment Various options available Other control systems: ESA 640 2D 15'' touchscreen control ¤ 4,520 ESA 675 W 3D 21'' touchscreen control (Windows Base) ¤ 6,485 DELEM 66 T 2D 17'' touchscreen control (Windows Base) ¤ 10,165 incl. DELEM 69 T 3D 17'' touchscreen control (Windows Base) ¤ 16,350 KK-Industries GmbH There is something for everyone!

Kondisi: baru, Pressure: 40 Bending length: 1530 mm Distance between uprights: 1530 mm Installation height: 590 mm Stroke length (max.): 300 mm Dimensions (LxWxH): 2660 x 1960 x 2500 mm Weight approx.: 4600 kg Motor power: 11 kW CNC Servo Electric Press Brake KKI Model REVOLUTION DDM-4015 Servo-driven Press Brake REVOLUTION Servo-electric press brakes contain no hydraulic system and, due to their flexibility and reliability, represent tomorrow’s technology. The increased speed and accuracy of this new generation of machines provide you with greater efficiency, ergonomic features, and environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with various models and tonnages, Dener is a technology pioneer – bringing extensive experience and quality. Standard equipment: KK-Industries is the general representative for the DENER Group. We have assembled a premium model for the European market. The CNC Servo Electric Press Brake by KK-Industries made by DENER: Technological advantages – Model REVOLUTION DDM: The CNC Servo Electric Press Brake stands out due to its high precision, accuracy, and versatile application possibilities. - 100% electric, 0% hydraulic oil - Up to 50% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter - Entire width between the frames is usable - Lower maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard equipment: 3D color graphic controller Delem 66T, 17'' touch screen Y1, Y2, X and R axes CNC-controlled X-axis: 500 mm, R-axis stroke: 150 mm for 1.5 m and 2 m models X-axis: 750 mm, R-axis stroke: 250 mm for all other models We make no compromises with the top tool and die, equipping the KKI REVOLUTION CNC Servo Electric Press Brake with quality tools from EUROSTAMP Italy. Segmented gooseneck top tool 4-V die block 60x60 (V = 16, 22, 35, and 50 mm) Backgauge with servo motors guided by linear rails and ball screw Of course, a machine is only as good as its service. That's why we focus on highly qualified staff with many years of experience in CNC sheet metal processing. Laser safety device on the upper beam CE safety equipment Operating instructions in GERMAN and ENGLISH Options: Additionally controlled backgauge axes X1, X2, R, Z1, Z2, Delta X ATF type 6-axis backgauge, X1, X2 - R-type backgauge X-Prime type backgauge Hydraulic upper and lower tool clamping for tools CNC 3D touchscreen controller DELEM DA-69T We recommend the following options: - Manual crowning          ¤ 2,330-- - CNC crowning              ¤ 4,658-- KK-Industries GmbH Kjdpfsd Etfzex Adwjnd Something for everyone!

Kondisi: baru, Pressure: 220 Ksdpfxod Edhle Adwjnd Bending length: 3,020 mm Frame width: 2,550 mm Installation height: 600 mm Stroke length (max.): 350 mm Throat depth: 450 mm Dimensions (LxWxH): 3,745 x 2,290 x 3,055 mm Approx. weight: 11,250 kg 4 axes (Y1, Y2, X, R): Yes, all axes operated via Delem DA 66 (2D graphical control) CNC crowning via control: Yes, via Delem DA 66 CNC control (2D graphical control) Motor power: 22 Standard equipment: KK Kletzer Europa We have put together a premium model for Europe. The KK-Industries CNC press brake made by DENER: Model: KK Kletzer EUROPA XL The robust EUROPA XL press brake stands for high precision, accuracy, and versatile application capabilities. The Europa XL features a very high installation height, resulting in a long stroke (cylinder travel). The ample throat depth is also above average, ensuring maximum flexibility for a wide range of tasks. We focus on quality, which is also reflected in the control system. Our standard control is the premium Esa S640 (2D graphical control). Additionally, the KKI Europa XL press brake is equipped with CNC axes Y1, Y2, X, and R, all operated via the control system. CNC crowning via the Esa S640 (2D graphical control) is naturally included. We make no compromises with the upper and lower tooling, equipping the KKI EUROPA XL CNC press brake with high-quality tools from EUROSTAMP, Italy. Of course, the performance of any machine is only as good as its support. That’s why we emphasize having highly qualified staff with extensive experience in CNC sheet metal processing. CNC axes Y1, Y2, X, and R Esa S640 (2D graphical control) Backgauge with dual linear guides and ballscrew Powered CNC crowning device Heavy-duty height adjustment with handwheel; from 175 tons, heavy-duty model with linear guides Laser safety device on the upper beam CE-compliant safety equipment Various options available Additional control programs: ESA 640 2D 15'' touchscreen control      incl. €4,520 ESA 675 W 3D 21'' touchscreen control (Windows-based)      €6,485 DELEM 66 T 2D 17'' touchscreen control (Windows-based)      €10,165 DELEM 69 T 3D 17'' touchscreen control (Windows-based)      €16,350 KK-Industries GmbH There’s something here for everyone!

Kondisi: bekas, Tahun pembuatan: 2011, Pressure: 400Bending length: 4050 mmFrame gap: 3400 mmPower consumption: 37.5 kWWeight approx.: 25,000 kgDimensions (LxWxH): 5750 x 2110 x 3440 mmCLEARANCE SALE – UNBELIEVABLE PRICE! CNC Press Brake DURMA AD-S 40400 (4 m x 400 t) Now at a special price ex works Böheimkirchen: only EUR 60,000! Knjdpsv Rtg Tefx Adwsd (New price approx. EUR 170,000) Technical data:Manufacturer: DURMA Model: AD-S 40400 Year: 2011 Bending length: 4,050 mm Press force: 400 tonnes Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Highlights: - CNC crowning – motorized adjustment via control panel - Upper tool: 1010/A/75° segmented, gooseneck design - Die: Multi-V die - CNC-controlled backgauge - 2 sheet supports on linear guides - CE-compliant laser safety device (Lasersafe) on upper beam - Machine complies with the latest CE regulations - Very good condition - Unique opportunity – immediately available! - Only 1 unit in stock – direct from site – no lead time! Take advantage of this rare opportunity for a high-performance machine at a fraction of the original price.

Kondisi: baru, Bending length: 2600 mm Sheet thickness: 5 mm Top roll diameter: 170 mm Technical data: - Rear roll driven by motor - Cone bending device - Hardened and polished rolls - Entire body made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gearboxes - Portable control panel - In compliance with CE standards Options: Kedpod Ab Nnofx Adwond - Bottom roll driven by electric motor EURO 1,650 - Digital display for indicating the position of the rear roll EURO 1,010 - Extended rolls EURO 966 - Profile rolls EURO 1,190 We have numerous references!

Kondisi: baru, Bending length: 2050 mm Sheet thickness: 4 mm Top roller diameter: 130 mm Ksdpfod Ab Nwox Adwjnd Technical Specifications: - Rear roller driven by electric motor - Cone bending device - Hardened and polished rollers - Entire frame made of St 52 steel - Main motor with brake system - Top and bottom rollers driven by electric motor, gearbox and gear system - Portable control panel - Cast iron body - Manual adjustment of rear and lower rollers - In compliance with CE standards Options: - Top roller driven by electric motor, EURO 1,260 - Digital display for rear roller position, EURO 1,010 - Hardened rollers, EURO 1,352 - Special voltage, EURO 480 - Sheet infeed table - Bottom roller driven by electric motor We have a wide range of references!

Kondisi: baru, Bending length: 1050 mm Sheet thickness: 5.5 mm Top roll diameter: 130 mm Technical Specifications: - Rear roll driven by motor - Cone bending device - Hardened and polished rolls - Entire body made of St 52 steel - Main motor with braking system - Top and bottom rolls driven by electric motor, gearbox, and transmission system - Portable control console - Cast iron body - Manual adjustment of rear and lower rolls - Conforms to CE standards Options: - Top roll driven by electric motor EURO 1,166.00 - Digital display for rear roll position EURO 1,010.00 - Hardened rolls EURO 799.00 - Special voltage EURO 480.00 - Material feeder table - Bottom roll driven by electric motor We have numerous references! Knodpfx Aded Ab Nyjwjd

Kondisi: baru, Plate thickness: 45 Bending length: 2600 Top roll diameter: 460 Technical data: - Hardened and polished rollers - Complete frame made of ST-52 steel - The 4 rolls are symmetrically arranged - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulics and gearbox - Vertical movement of the bottom roll is hydraulically driven - Movable control panel - In compliance with CE standards Knedpod Ab Rhofx Adwod Options: - Variable rotation speed EURO 5,858.00 - Material feed table EURO 5,100.00 - Oil cooler STD. - Central support EURO 18,750.00 - Side supports EURO 12,500.00 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Kondisi: baru, Sheet thickness: 40 mm Bending length: 2600 mm Top roll diameter: 430 mm Technical data: - Hardened and polished rolls - Complete frame made of ST-52 steel - 4 rolls arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic positioning - Top and lower rolls driven by hydraulic system and gearbox - Vertical movement of the lower roll hydraulically driven - Mobile control panel - In compliance with CE standards Options: - Variable rotation speed EURO 5,858 - Material feed table EURO 3,400 Knjdpjd Ab Rmjfx Adwjd - Oil cooler standard - Center support EURO 13,600 - Side supports EURO 9,600 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have many references!

Kondisi: baru, Sheet thickness: 16 | Bending length: 4100 | Upper roll diameter: 390 Technical Specifications: - Hardened and polished rolls Kjdpfod Ab Rpjx Adwjnd - Complete frame made from ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically operated top for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Upper and lower rolls driven by hydraulic system and gearbox - Vertical movement of the lower roll is hydraulically driven - Movable control console - In compliance with CE standards Options: - Variable rotation speed: €4,681 - Material feeding table: €3,400 - Oil cooler: €1,040 - Central support: €13,600 - Side supports: €12,516 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for specific customer requirements) We have a large number of references!

Kondisi: baru, Sheet thickness: 30 Bending length: 2100 Top roll diameter: 360 Technical Data: - Hardened and polished rolls - Complete body made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movement of the bottom roll is hydraulically driven - Mobile control panel - In compliance with CE standards Options: - Variable rotation speed EUR 4,681 - Material feed table EUR 3,400 - Oil cooler EUR 1,040 - Central support EUR 13,600 - Side supports EUR 9,060 - Automatic material extractor - PLC control - CNC control Knodpjd Ab Rxjfx Adwed - Automatic material loading system - Replaceable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Kondisi: baru, Sheet thickness: 13 mm Bending length: 3100 mm Top roller diameter: 300 mm Technical Data: - Hardened and polished rollers - Entire frame made from ST-52 steel - The 4 rollers are symmetrically arranged - Hydraulically driven top cover for easy material removal - Digital display for lower and side roller positions Knedsd Ab R Hspfx Adwjd - Hydraulic adjustment - Top and bottom rollers are driven by hydraulics and gearbox - Vertical movements of the lower roller are hydraulically powered - Movable control panel - In compliance with CE standards Options: - Variable rotation speed EURO 4,681 - Material feed table EURO 3,400 - Oil cooler EURO 1,040 - Central support EURO 13,600 - Side supports EURO 9,400 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Exchangeable top roller - Adjustable lower roller support system (for special customer requests) We have numerous references!

Kondisi: baru, Sheet thickness: 10 mm Bending length: 3,100 mm Top roll diameter: 270 mm Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 steel - Four rolls arranged symmetrically Knsdped Ab R Sofx Adwed - Hydraulically operated top cover for easy material removal - Digital display for bottom and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulics and gearbox - Vertical movement of the bottom roll hydraulically powered - Movable control panel - In accordance with CE regulations Options: - Variable rotation speed: EUR 4,681 - Feed-in table: EUR 3,400 - Oil cooler: EUR 1,040 - Central support: EUR 8,250 - Side supports: EUR 7,070 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable bottom roll support system (for special customer requirements) We have many references!

Kondisi: baru, Sheet thickness: 16 Bending length: 2100 Top roller diameter: 270 Technical Data: - Hardened and polished rollers - Complete frame made of ST-52 steel - The 4 rollers are symmetrically arranged - Hydraulically operated top cover for easy material removal - Digital display for lower and side roller position - Hydraulic adjustment - Top and bottom rollers driven by hydraulics and gearbox - Vertical movement of the lower roller is hydraulically powered - Mobile control panel - In compliance with CE standards Options: - Variable rotation speed EURO 4,681 - Material feed table EURO 3,400 - Oil cooler EURO 1,040 Kodod Ab R Ujpfx Adwsnd - Central support EURO 8,250 - Side supports EURO 5,700 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have a large number of references!

Kondisi: baru, Bending length: 3100 mm Sheet thickness: 25 mm Top roll diameter: 390 mm Technical specifications: Knjdped Ab Swsfx Adwsd - Hardened and polished rolls - Complete machine frame made from ST-52 steel - Conical bending device - Digital display for side rolls - Portable control console - Rolls are mounted on bearings - Top roll cover hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements are hydraulically driven Options: - Variable rotation speed EUR 4,682 - Material feed table on request - Oil cooler EUR 1,040 - Central support EUR 13,600 - Side supports EUR 10,540 We have many references available!

Kondisi: baru, Bending length: 2100 mm Sheet thickness: 40 mm Top roll diameter: 390 mm Technical data: - Hardened and polished rolls - Complete frame made of ST-52 steel - Conical bending device Kjdpfx Adjd Ab Syjwsnd - Digital display for side rolls - Portable control console - Rolls are mounted with bearings - Top roll cover, hydraulically openable and lockable via control panel - All rolls are driven by hydraulic motor and planetary gearbox - Lateral movements are hydraulically operated Options: - Variable rotation speed EURO 4,682.00 - Material feed table on request - Oil cooler EURO 1,040.00 - Central support EURO 13,600.00 - Side supports EURO 9,250.00 We have many references!

Kondisi: baru, Bending length: 3100 mm Sheet thickness: 20 mm Top roll diameter: 360 mm Technical specifications: - Hardened and polished rolls - Entire frame made of ST-52 steel - Conical bending device - Digital display for side rolls Knodod Ab S Aepfx Adwod - Portable control panel - Rolls mounted on bearings - Top roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements are hydraulically powered Options: - Variable rotation speed: EUR 4,682 - Material feed table on request - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 9,400 We have numerous references!

Kondisi: baru, Bending length: 2100 mm Sheet thickness: 20 mm Upper roller diameter: 300 mm Technical data: - Hardened and polished rollers - Complete frame made from ST-52 steel - Conical bending device - Digital display for side rollers - Portable control panel - Rollers are mounted with bearings - Top roller cover, hydraulically openable and closable via control panel Kodpsd Ab Tajfx Adwjnd - All rollers driven by hydraulic motor and planetary gearbox - Side movements hydraulically powered Options: - Variable rotation speed EUR 4,682 - Sheet feeding table on request - Oil cooler EUR 1,040 - Central support EUR 13,600 - Side supports EUR 8,400 We have numerous references!