Beli Tenoner bekas (388)

Kondisi: baru, 主轴转速：9000转/分钟 主轴电机功率：4千瓦 刀具循环电机功率：0.75千瓦 Tsdpfjn Nwdlex Af Sjd 最大榫头宽度：100+2RM毫米 最大榫头厚度：30毫米 最大榫头深度（肩部）：50毫米 工作台向上倾斜角度：0-15度 工作台向下倾斜角度：0-30度 工作台侧向倾斜角度：0-20度 靠山调节范围：90至45度 气动可调式工件夹具 × 2 PLC控制操作 TCT一次性刀尖刀轴 外形尺寸：1300 x 1200 x 1600毫米 重量：950千克

Kondisi: sangat baik (bekas), I am selling a double-ended profiling milling machine, CELASCHI TSA 300. Tjdpfovxu Uhex Af Ssd Working width up to 3000 mm Feed speed: 3–18 m/min. Configuration left side / fixed: - 1 pc. cutting unit, 4.0 kW - 1 pc. milling unit, 5.5 kW Configuration right side / movable: - 1 pc. cutting unit, 4.0 kW - 1 pc. milling unit, 5.5 kW Material hold-down belt with top-side feed. Through-feed machine. Condition: very good. Fully operational. Available immediately.

Kondisi: siap digunakan (bekas), Technische Daten Zusammensetzung: Säge: Sägeblattdurchmesser: 350 mm Wellendurchmesser: 30 mm Schnitthöhe: xxx mm Motor: 1,8 kW (2,5 PS) Obere Abwickeleinheit: Welllenlänge: 150 mm Werkzeugdurchmesser: 150 mm Motor: 1,8 kW (2,5 PS) Untere Abwickeleinheit: Welllenlänge: 150 mm Werkzeugdurchmesser: 150 mm Motor: 1,8 kW (2,5 PS) Spindel: Wellendurchmesser: 50 mm, Länge: 200 mm Maximaler Werkzeugdurchmesser: 300 mm Motor: 4 kW (5,4 PS) Kappschnitt: Welle für Endanschlag Welllenlänge: 150 mm Werkzeugdurchmesser: 150 mm Motor: 1,8 kW (2,5 PS) Gusseiserner verfahrbarer Schlitten (600 x 500 mm) ELBE-Aluminiumanschlaglineal Pneumatische Presse Absaugstutzen: 4 x 150 mm + 1 x 80 mm (Säge) Leistung und Motoren Spannung: 380 V Tjdpfxsttpp Hs Af Sod Anschluss: Dreiphasig Gesamtleistung: 12 kW Gesamtabmessungen

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, en: FRIULMAC Floormat EQ • Year of manufacture: 2015 • Manufacturer: FRIULMAC (Italy) • Model: Floormat EQ • Machine dimensions: 5700 x 2800 x 1600 mm (L x W x H) • Control panel dimensions: 1350 x 550 x 1100 mm (L x W x H) Technical specifications Workpiece dimensions Length: 400 – 4000 mm Width: 80 – 260 mm Thickness: 8 – 40 mm Motor output Total power consumption: 38.00 kW Full load current: 84.00 A Connection voltage: 400/500 V/Hz Compressed air consumption Operating pressure: 6 bar Air consumption: 1030 l/min Tjdpswrm Ncofx Af Ssd

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Double-end tenoner Homag 4+4 motors Tedpfjrcbccex Af Ssd Maximum opening 2500 mm Long infeed fence

Kondisi: bekas, Used, good condition Tsdpjvwf S Ujfx Af Sjd Manufacturer: Magic Model: MTP 27 Positioning control Number of spindles: 1 unit Spindle diameter: 50 mm Clamping height: approx. 270 mm Cut-off saw Speeds: 3500 rpm

Tahun pembuatan: 2007, Kondisi: sangat baik (bekas), I am selling a double-end tenoning and milling machine FRIULMAC IDRAMAT, year of manufacture 2007. Working width up to 2500 mm Configuration left side / fixed: 1 + 1 unit sawing aggregates top + bottom / 3.0 + 3.0 kW 1 + 1 unit grooving saw aggregates front + rear with pneumatic lift Configuration right side / movable: 1 + 1 unit sawing aggregates top + bottom / 3.0 + 3.0 kW 1 unit special milling aggregate top / 5.5 kW Upper material pressure belt with feed. Todpfxeib A E Ae Af Sod Special design, also suitable for edge sizing. Through-feed machine. Siemens Simatic control panel. Condition: Very good. Available immediately.

Kondisi: siap digunakan (bekas), Technische Merkmale Sägeblatt-Ø: 350 mm Tsdpfx Aet Ruuhof Sod Vorschub: 230 mm Spindeldurchmesser: 50 mm Länge: 170 mm Max Ø: 320 mm Vorschub: 240 mm Gusseisener Schiebetisch Manuelle Spannvorrichtung Vertikaler Verfahrweg der Spindel: 340 mm Neigbare Spindel für spezielle Bearbeitungen: 0 bis 30° Ideal für Möbelbau, Tischlerei, Schlitz- und Zapfenverbindungen Suche nach Typ: Einfach Leistung und Motoren Gesamtmaße

Kondisi: bekas, Used, excellent condition, low operating hours Tedsvwfvgopfx Af Sod Cleaned, function tested, test run performed Maintenance unit and switch housing renewed Pneumatic system completely resealed Including adjustable mini finger-joint cutter, 60 to approx. 95 mm Manufacturer: Hirsch Type: LQP 180 Year of manufacture: approx. 1992 For cross-milling of mini finger joints and counter profiles Swivel adjustment to +70/-70 degrees Length stop measurement Wood clamping with bridge, 8 bar Manual feed of saw and milling carriage Safety interlock system Electric brake system Max. timber thickness: 80 mm Min. timber thickness: 10 mm Max. profile depth: 50 mm Saw unit: - Three-phase motor 2.2 kW - Spindle speed: 2800 rpm - Horizontal adjustment: 50 mm Milling unit: - Three-phase motor 4 kW - Spindle speed: 6000 rpm - Usable spindle length: 100 mm - Spindle diameter: 40 mm - Tool diameter: 180 mm - Weight: 850 kg - Dimensions: approx. 1700 x 1450 mm Special accessories: - Digital angle display, completely renewed, original Elgo - Angle display increments: 1/10 degree Original price: approx. €20,000.00 Location: 97447 Gerolzhofen Sale as is, as inspected No warranty or guarantee

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, I am selling a double-end profiler milling machine SCM CONCEPT NT. Working width up to 3000 mm Configuration left side / fixed: 1 pc. cutting unit 1 pc. milling unit 1 pc. movable jump-in milling unit Configuration right side / movable: 1 pc. cutting unit 1 pc. milling unit 1 pc. movable jump-in milling unit Material pressure belt with top feed. Tjdpetv Rxbjfx Af Sjd Throughfeed machine. Condition: Very good. Available immediately.

Kondisi: siap digunakan (bekas), de-CH-001 Tsdpfx Aotpry Sjf Sjd

Tahun pembuatan: 1996, Kondisi: sangat baik (bekas), I am selling a double-end profiling milling machine EGURKO ORTZA PDA 56/2. Working width: 200 to 3000 mm Configuration left side / fixed: 3 swiveling side milling units Configuration right side / movable: 3 swiveling side milling units Material pressure belt with overhead feed. Throughfeed machine. Condition: Very good. Available immediately. Installed and ready to run immediately. Tsdpfx Afsizrf Nj Sjd Price per piece. 2 units in stock and available.

Kondisi: siap digunakan (bekas), Caractéristiques techniques Avance chariot motorisée Groupe lame : Ø 380 mm maxi Réglage motorisé – digital Tjdpfx Ajtprzpsf Sed Groupe toupie Arbre de 180 mm Inclinable Réglage motorisé – digital Groupe disque Ø 200 mm Réglage manuel Butée à coulisse Presseur pneumatique automatique Idéal pour menuiseries d’agencement Recherche par type simple Puissance et moteurs Tension : 380 V Branchement : Triphasé Dimensions hors tout

Kondisi: siap digunakan (bekas), Caractéristiques techniques Puissance et moteurs Todpfjutxnqex Af Sod Tension : 380 V Branchement : Triphasé Dimensions hors tout

Kondisi: siap digunakan (bekas), Charakteristische technische Daten Wellenlänge: 250 mm Max. Werkzeugdurchmesser: 200 mm Wellendurchmesser: 50 mm Manuelles Anheben/Absenken der Welle Tischlänge: 1100 mm Tischbreite: 720 mm Motorleistung: 5,5 kW (7,5 PS) 4 Drehzahlen: 3000, 5000, 6000 und 8000 U/min Zapfenschlitten verfahrbar über die Breite Tjdpjtvczuefx Af Sod Schlittenmaße: 750 x 300 mm Verlängerbarer Anschlag einstellbar 2 Absauganschlüsse mit je 120 mm Durchmesser am Schutz Ideal für kleine Serienfertigung Leistung und Motoren Spannung: 380 V Anschluss: Drehstrom Leistung: 6 kW Gesamtabmessungen Länge: 1100 mm Breite: 720 mm

Kondisi: siap digunakan (bekas), Technische Daten Sägeblatt-Ø: 350 mm Rückhub: 230 mm Fräseraufnahme: 50 mm Tjdpfxeuaiiqs Af Sed Länge: 170 mm Max. Ø: 320 mm Rückhub: 240 mm Gusseisen-Schiebeschlitten Handspannvorrichtung Vertikaler Spindelhub: 340 mm Schwenkbare Spindel für spezifische Bearbeitungen: 0 bis 30° Ideal für Möbelbau, Tischlereien, Keilzinken Typenbasierte Suche, einfach Leistung und Motoren Spannung: 380 V Anschluss: Drehstrom Abmessungen gesamt

Kondisi: siap digunakan (bekas), Caractéristiques techniques capacité 200 mm Dérouleurs supérieur / inférieur de diamètre 150 mm avec réglage indépendant et simultané Passage du bois hauteur 200 mm, largeur 150 mm Chariot avec butées réglables et ajustables Diamètre de lame 500 mm Puissance et moteurs Dimensions hors tout Tjdpfxottrqdj Af Sed

Kondisi: siap digunakan (bekas), Technische Daten Sonderausführung: Schwalbenschwanz-/Keilzinkenverbindung Fräskreissäge Bremsmotor 4 kW, 3000/6000 U/min Anschlag mit Digitalanzeige Motorisierter Schlittenvorschub Pneumatischer Niederhalter Armlänge: 180 mm Holzdurchlasshöhe: 150 mm Wellendurchmesser: 50 mm Sägendurchmesser: 400 mm Frässpindeldrehzahl: 3000 U/min Suchtyp: Einfach Leistung und Motoren Leistung: 3 kW Gesamtabmessungen Länge: 2600 mm Breite: 4000 mm Tsdpfx Afotprzte Ssd Höhe: 1500 mm Gewicht: 800 kg

Kondisi: siap digunakan (bekas), fr-FR: Caractéristiques techniques FL20/16/30/II/S Tedpfjty Rxiox Af Sed 400V 3Ph+n 200A Largeur 300 mm 2x1 unité de dressage 2x1 déchiqueteuse double (de bas en haut) 3,5 kW 2x1 unité de fraisage standard 6 kW 2x1 unité de fraisage universelle 4,5 kW 2x1 unité de fraisage universelle 3,5 kW 2x1 unité de fraisage universelle 1 kW 2x1 unité de fraisage universelle 0,75 kW 2x1 unité de ponçage 2x1 unité de ponçage 2x3 unités de transfert thermique KURTZ Mécanisation de l’entrée et de la sortie Tri et contrôle qualité Recherche par type : Double Puissance et moteurs Raccordement : Trois phases Dimensions hors tout

Kondisi: siap digunakan (bekas), Technische Daten Fräs- und Zapfmaschine ausgestattet mit Zapfwagen, Tischverlängerung und Stützstange Arbeitstischmaße: 1100 x 700 mm Maximaler Werkzeugdurchmesser: 300 mm Frässpindeldurchmesser: 30, 40 und 50 mm Vertikalhub der Spindel: 220 mm Motor: 7,5 kW Drehzahlen: 2900, 4400, 6000 und 8000 U/min Maschine mit spezieller Schutzhaube für beide Verwendungsarten (Fräsen und Zapfen) Tsdpfxek Rtg Nj Af Sod Leistung und Motoren Spannung: 400 V Anschluss: Dreiphasig Leistung: 7,5 kW Gesamtabmessungen Gewicht: 740 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, hentian panjang: 4.500 mm, diameter alat: 400 mm, kecepatan spindel (maks.): 6.000 rpm, model controller: Weinig Unicontrol 12, TECHNICAL DETAILS Cross-cut saw (electronic, horizontal stepless adjustment) Number of tools: 1 pc. Motor power: 3.7 kW Spindle speed: 3,000–6,000 rpm Spindle diameter: 40 mm Tool diameter: max. 400 mm Axial adjustment stroke: 150 mm NC axis, electronically stepless Radial adjustment stroke: pneumatic, 8 positions (e.g. edge rounding from above) Rounding unit Position: horizontally below Axial adjustment stroke: together with cross-cut saw Electronic length stop Length: 4,500 mm 1st & 2nd tenon and slot spindle Spindle diameter: 50 mm Spindle speed: 2,800–4,000 rpm Motor power: 15 kW Tool diameter: 380–400 mm Tool clamping length: 640 mm, with counter bearing Axial adjustment stroke: 580 mm NC axis, stepless Trailing counterbearing (entire clamping length is countered) 1st & 2nd profiling spindle Position: vertical right Spindle diameter: 50 mm Spindle speed: 6,000 rpm Motor power: 11 kW Tool clamping length: 400 mm, with counter bearing Tjdpfx Afexp U N Ne Sjd Tool swing diameter: min. 140 mm Tool swing diameter: max. 232 mm Axial adjustment stroke: 350 mm NC axis, stepless Radial adjustment stroke: 80 mm NC axis, stepless Profile milling unit (grooving unit from above) Spindle diameter: 40 mm Motor power: 3.0 kW Tool clamping length: 40 mm Axial adjustment stroke: 30 mm NC axis, stepless Radial adjustment stroke: 125 mm NC axis, stepless Spindle speed: 9,000 rpm Tool swing diameter max.: 130 mm 4th profiling spindle Position: vertical right Number of tools: variable Motor power: 11 kW Spindle diameter: 50 mm Tool clamping length: 400 mm, with counter bearing Axial adjustment stroke: 350 mm NC axis, stepless Radial adjustment stroke: 80 mm NC axis, stepless Spindle speed: 6,000 rpm Tool swing diameter min.: 140 mm Tool swing diameter max.: 232 mm 5th profile milling unit (fitting spindle) Position: vertical right Motor power: 3.0 kW Spindle diameter: 40 mm Tool clamping length: 160 mm Axial adjustment stroke: 115 mm NC axis, stepless Radial adjustment stroke: 100 mm NC axis, stepless Spindle speed: 5,850 rpm Tool swing diameter max.: 210 mm 6th profile milling unit (grooving unit from above), in auxiliary stand Position: vertically from above on the right-hand side Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 40 mm Axial adjustment stroke: 100 mm, 8 positions via pneumatic turret Radial adjustment stroke: 80 mm, 8 positions via pneumatic turret Spindle speed: 5,850 rpm Tool swing diameter max.: 180 mm 7th profiling spindle (grooving unit from below), in auxiliary stand Position: horizontally below Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 125 mm Axial adjustment stroke: 100 mm NC axis, stepless Radial adjustment stroke: 100 mm NC axis, stepless Spindle speed: 5,850 rpm Tool swing diameter max.: 200 mm MACHINE DETAILS Slot spindle: 2 pcs. Number of milling units: 7 pcs. Control: Weinig PC-Nexus Weinig Unicontrol 12 INCLUDES used OERTLI window tooling set IV 68, IV 78 – wood and wood-alu Further equipment details can be found in the attached document! Note: The machine has already been professionally dismantled.

Kondisi: bekas, nomor mesin/kendaraan: 006064, Gergaji format: Mesin 1 & 2 Tinggi panel maksimum: 85 mm Kecepatan pengumpanan maksimum: 26 m/menit Tedpfelw A D Tjx Af Sod Jarak antar kait: 1000 mm

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm #6971 Weinig Unicontrol 6 Technical Data Summary (Additional accessories possibly included, please inquire) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser alignment for visualizing the saw section CNC-controlled length stop ----- > Length 3,500 mm > Electronic length stop including positioned cross-cut saw Item 2: Tenoning and slotting spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical spindle stroke pneumatic: 240 mm for wood thicknesses 68 – 92 mm > Spindle speed: 3,000 rpm > Max. tool swing diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 360 mm > Motor power: 11 kW Item 3: 1st profiling spindle (climb and conventional milling) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle Todpfx Afjxtvgko Sjd ----- > Position: vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical spindle stroke pneumatic: 240 mm for wood thicknesses 68 – 92 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for processing narrow, short workpieces (e.g. muntin bars for glazing) Sash bar guide consisting of: Sash bar support rail from above in the area of the vertical right profiling unit and profiling spindle. Item 5: Horizontal top profiling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool swing diameter: 130 mm > Axial adjustment 30 mm, 2 positions > Radial adjustment 125 mm, 4 positions, manual Item 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 110 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing diameter: 210 mm > Motor power: 3.8 kW Additional features ----- > Electric feed height adjustment including mechanical digital display and manual feed beam clamping > Scribing unit for chip-free scribing > Twin workpiece package > Return device for one-man operation: pivoting belt > Screen control > Angled window feature > Electronic angle display for angled windows > Industrial PC with Windows PC control/NEXUS Extraction nozzle diameter: ----- Cross-cut saw 80 mm Slot spindle 140 mm Profiling spindle 1 140 mm Profiling spindle 2 140 mm Grooving unit...

Kondisi: bekas, Slot spindle 1 pc Number of milling units: 4 pcs Spindle diameter: 50 mm 1 used Weinig Unicontrol 6 window manufacturing line ----- For sale on behalf of customer Manufacturer's description: Designed for the production of individual components, elements, and small series. Spindle arrangement: One crosscut saw, a single-sided tenoning and slotting spindle, a right-side profiling spindle, and a tenoning/slotting spindle and profiling spindle capable of accommodating multiple tools stacked above each other, with pneumatic spindle movement. Slotting table with motorized table feed and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit; feed height adjustment is manual. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifier for frame or sash outer dimensions. Control of tool positions (longitudinal and transverse processing) via rotary selector switch from the control panel. Technical data ----- Crosscut saw ----- Number of tools: 1 Spindle speed: 2,800 rpm Spindle diameter: 40 mm Max. tool diameter: 350 mm Motor: 3 kW Tenoning and slotting spindle ----- Number of tools: 3/4 pcs for timber thickness IV 68 – IV 92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Max. tool diameter: 320 mm Motor: 11 kW Profiling spindle ----- Number of tools: 3/4 pcs for timber thickness IV 68 – IV 92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Max. tool diameter: 232 mm Motor: 11 kW Special equipment: Tedpfx Ajw I Ea Dof Sed Climb-cut spindle ----- Pneumatically actuated forward-backward movement for splinter-free machining of window sashes, frames, and doors. Spindle diameter: 50 mm, 4 kW Tool clamping length: 120 mm, Tool zero diameter: 112–140 mm Max. tool diameter: 232 mm, spindle speed: 6,000 rpm Motor upgrade for climb-cut spindle from 4 kW to 7.5 kW Screen control for 99 window types. 1 type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production possibilities: single pieces, double pieces, by frame, by series, remachining. Data input via keyboard with integrated user guidance and error diagnostics. 1 top grooving spindle ----- Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm, with key 10 x 4 mm Mounting length: 13 mm Clamping length: 40 mm Axial adjustment: 2 positions Radial adjustment: 2 positions Max. tool diameter: 130 mm Motor upgrade for grooving spindle from 2.2 to 3 kW 1 fitting milling unit, right: ----- For milling the hardware groove during rebating or grooving in the longitudinal profile. Pneumatic horizontal movement actuated via selector switch on the control panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool diameter range: min. 140 mm, max. 180 mm Home position below table level: 10 mm Fitting milling spindle in special version: Clamping length: 150 mm Axial stroke: 80 mm, 3 positions 3 tools Radial adjustment, 2 positions Motor upgrade for fitting milling spindle from 2.2 to 3 kW Fitting milling spindle for 230 mm tool diameter both at and above the table Electrical height adjustment of the feed with selector switch on the control panel for 2 timber dimensions, incl...

Kondisi: bekas, Tahun pembuatan: 1998, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm 1 GUBISCH – CENTROMAT CW 2 ----- Manufacturer's Description: ----- For the production of windows and doors, with a 50 mm spindle diameter for longitudinal profiling. Equipped with the following processing stations and features: - Single-sided slotting automaton for straight and angled joints, milling automaton for longitudinal profiling - Rebating operation with synchronous milling unit and plunge automation - Tiltable frame support up to 650 mm - Central control system 1.0 Cross-cut saw, automatic, plunges from above ----- Motor power incl. motor brake: 3.0 kW Spindle speed: 2,800 rpm Cutting circle diameter: 350 mm Spindle diameter: 30 mm Clamping flange, 1 driver 6 mm, TK 42, 120 mm diameter Vertical stroke, pneumatic: 100 mm Horizontal stroke, pneumatic: 160 mm Against 2 manually adjustable 6-position turret stops Chip extraction hood with 100 mm diameter extraction nozzle 2.0 Slotting unit ----- Motor power incl. motor brake: 9.2 kW Spindle speed: 3,800 rpm Cutting circle diameter: 320 mm Spindle diameter: 50 mm Usable spindle length: 320 mm Vertical stroke, pneumatic, fixed: 2 x 100 mm Suitable for 3 tool sets, 100 mm each Zero height: 10 mm Chip extraction hood with 160 mm diameter extraction nozzle 3.0 Slotting table ----- Table height above floor: 920 mm Feed for 4 infinitely adjustable speeds: - 1. Milling, angled window, and tip speed adjustable on the control panel (approx. 7 m/min) - 2. Sawing speed approx. 7 m/min (set on the machine) - 3. Transfer speed approx. 10 m/min (set on the machine) - 4. Return speed / without processing approx. 25 m/min (set on the machine) - Motor power incl. motor brake: 0.37 kW Workpiece clamping: Pneumatic oscillating pressure shoes Workpiece clamping: Pneumatic 1 clamping cylinder with 2 additional pressure shoes 3.1 Counter batten device: Counter batten changer with 2-position automatic change and then, after manual 180-degree rotation, 2 further counter-battens possible, which can also be automatically engaged 3.2 Length stop Tedpew I Eawofx Af Ssd ----- - Stop system with 3 scales for - a) Outer frame - b) Outer sash, upright - c) Outer sash, crosswise; manual adjustment - Length with attachable extension: 3,000 mm - Swivels for angled windows: +/- 60 degrees 3.3 Angle transfer - automatic via vertically indexed feed roller in the milling feed 4.0 Milling unit For longitudinal profiling and rebating of windows/doors with the following units: ----- 4.1 First profile milling unit ----- - Counter-rotation - Synchronous rotation with plunge automation usable for rebating - Motor power incl. motor brake: 9.2 kW - Spindle speed: 6,000 rpm - Cutting circle diameter: max. 240 mm - Spindles adjustable for zero diameter: max. 140 mm, min. 112 mm (tools) - Zero height: 10 mm - Spindle diameter: 50 mm - Usable spindle length: 320 mm - Vertical stroke, pneumatic, fixed - Suitable for 4 tool sets, 80 mm each, 3 x 80 mm - Horizontal stroke, pneumatic: 80 mm - Chip extraction with 140 mm diameter extraction nozzle 4.2 Second profile milling ...