Beli Tepi Banding bekas (4.072)

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 8 kg Total power requirement: 0.9 kW Edge banding machine PM5000 With the mobile edge banding machine PM5000 from WEGOMA-VIRUTEX, any workpiece can be easily and conveniently edged: compatible with PVC, ABS, melamine, laminate, or veneer tape that has been pre-cut to the desired length. Fpsdjv A E Iyspfx Adgob Suitable for straight, rounded, or shaped panels. Thanks to its user-friendly operation and quick setup, it is particularly practical for the production of small quantities. Equipped with assisted edge feed and electronic speed control. Electronic temperature regulation and precise glue dosage control. Glue pot and edge guide are Teflon® coated for easy cleaning and maintenance. - Microprocessor-controlled temperature setting from 120° to 200° - Speed adjustment on the handle - Adjustment during edging possible, ECO mode - Sleep mode after 1 hour of inactivity, Teflon-coated glue pot - Special glue roller (polymer-coated) for processing 3D edges - Min. edge thickness: 0.4 mm - Max. edge thickness: 3 mm - Max. edge height: 65 mm - Speeds: 2, 4, 5, 6 m/min - Temperature: 120° - 200° - Glue pot capacity: 230 cm³ - Heat-up time: approx. 8 min - Voltage: 230 V, 50/60 Hz - Power: 830 W

Kondisi: bekas, hebrock-euro-3001-kantenanleimmaschine Fpsdpfxoxdc D Ro Adgob

Kondisi: bekas, Tahun pembuatan: 2011, Mesin bekas Tahun pembuatan: 2011 Kondisi: Mesin telah direkondisi dan dirawat sepenuhnya Perlengkapan dan data teknis: Kecepatan umpan stepless 10-18 m/menit Kontrol Edge Control 19 dengan layar sentuh warna 18,5" Unit penghalusan pinggiran Sistem pemberian tepi otomatis Stasiun aplikasi lem dengan patron, nosel sensor penyesuaian tinggi lem otomatis Unit penekan Unit pemotong Unit milling multifungsi Unit copy milling Unit scraper radius Unit scraper permukaan Unit pemoles Tebal benda kerja: 6 - 60 mm Tebal pinggiran: 0,4 - 8 mm Lebar benda kerja minimum: 60 mm Panjang benda kerja minimum: 180 mm Fodpfjwka N Tsx Adgepb Dimensi: 5300x1500x1600 mm Berat: 2200 kg Lokasi: 65439 Flörsheim Ketersediaan: segera

Kondisi: bekas, Mesin Pelapis Tepi Tempora F 60.06 - Tahun pembuatan: 2018 - Mesin frais sambungan, mesin frais radius, pisau tarik untuk radius dan permukaan Fodpsx Ha I Uefx Adgjpb - Cairan pembersih dan pemisah - Perangkat penyemprot - Ketebalan tepi: 0,4–6 mm - Panjang instalasi: 3220 mm - Pemotongan gergaji

Kondisi: sangat baik (bekas), COMPLETE FOUR-SIDED PANEL PROCESSING AND EDGE-BANDING LINE, max. working width: 3,000 mm, equipped with automatic feeding and stacking system, comprising the following machines: X03001A) Feeding gantry (with 2 loading stations) "RBO" Model Winner C 3200 X03001B) 1st double-sided panel sizing and edge-banding machine "BIESSE" Stream SB 1 - 7.5 X03001C) Panel turning device (90° LONGITUDINAL–CROSSWISE) "RBO" Model GPK 1 Fjdpfx Asi Rbg Tjdgepb X03001D) 2nd double-sided panel sizing and edge-banding machine "BIESSE" Stream SB 2 - 11 X03001E) Panel turning device (90° CROSSWISE–LONGITUDINAL) "RBO" Model GPK 2 X03001F) Stacking gantry (with 2 unloading stations) "RBO" Model Winner S 3200

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 1820 x 585 x 1450 mm Weight: 500 kg Total power requirement: 4 kW Edgebander KANTOMAX EASY - Min. / Max. edge thickness: 0.4 – 3 mm - Min. / Max. edge height: 15 – 48 mm - Min. / Max. workpiece height: 12 – 45 mm - Min. workpiece width: 80 mm - Min. workpiece length: 120 mm - Feed motor: 1.1 kW - Feed speed: 8 m/min - Control panel positioned at machine infeed at eye level - Chain feed - Support plate for PVC and ABS edge banding material - Pressure zone with pneumatically driven main pressure roller and follow-up pressure rollers for compressing the glue joint - Centrally adjustable top pressure - Glue pot with Teflon coating for EVA hot-melt granulate - Glue application via glue roller - Electronic temperature control, working temperature 180–200°C - Pneumatic end trimming unit - Pneumatic cylinder for workpiece spacing - End trimming saw unit for front and rear edge overhang, high-precision linear guide, motor 0.5 kW, 200 Hz, 12,000 rpm, pull cut for high accuracy - Flush and radius trimming unit, top and bottom, with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Buffing unit for edge finishing, top and bottom, 2 motors each 0.18 kW, 50 Hz, 1,400 rpm Fpedpfxovz Hd Ho Adgsb - Total power consumption: 4.0 kW / 400 V - Extraction connector Ø 100 mm - Extendable workpiece support - Noise protection enclosure with inspection window - Compressed air connection: 6 bar - Dimensions: L=1820, W=585, H=1450 mm - Weight: 500 kg

Kondisi: bekas, Tahun pembuatan: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure beam adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters, both conventional and climb milling Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feed for rolls and strip material Glue application system 1906: - Cartridge system with sensing nozzle - With automatic reloading - Suitable for PUR adhesives Pressure station 1816: - Driven roller - Pneumatic control of pressure station End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0° to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at the milling unit Corner copy unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - Plastic edges up to 3 mm - Chip collection box for radius scraper Flat scraper 1964: - Operation-controlled flat scraper - Air nozzle at the flat scraper Buffing unit 1940 Edge thickness for roll material: 3 mm Edge thickness for strip material: 5 mm Max. edge thickness for corner copying: 3 mm Workpiece thickness: 6–45 mm Workpiece thickness for corner copying: 45 mm Minimum workpiece length: 180 mm Feed speed: 8 m/min Workpiece support distance: 470 mm Support plate Ø for edge material: 800 mm End trimming knife for roll material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimming saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Suction connection jointing unit: 120 mm Suction connection milling unit: 70 mm Suction connection scraper unit: 70 mm Fedpfx Aewka Nyedgepb Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short-term

Kondisi: sangat baik (bekas), Double-sided sizing and edge banding line (also "softforming") with automatic conveying system. Suitable for panel thicknesses up to 100 mm. Consisting of the following machines: W05025A) Loading device (gantry) "MAHROS" model Brush W05025B) Double-sided sizing and edge banding machine "HOMAG" model KFL 620/23/QE/30 (softforming) SIZING SECTION (for each side): Jointing milling unit (2 x 6.6 kW) Free slot Left only: 2 x universal milling units (swivable) (2 x 6.6 kW) EDGE BANDING SECTION (for each side): Gluing unit (hot melt glue + premelter) Edge magazine for rolls (slot no. 1) Edge pressure zone both STRAIGHT and SOFTFORMING End trimming unit WK14 (2 x 0.8 kW) Milling unit (2 x 0.55 kW) Fsdott Dqpepfx Adgopb Contour copying milling unit FF 12 (4 motors) WD70 Profile scraper unit PN20 Finishing unit (flat scraper + polishing unit) FA11 W05025C) Stacking device (gantry) "MAHROS" model Brush

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 2650 x 640 x 1400 mm Weight: 700 kg Fpjdpsvz E T Hofx Adgeb Total power requirement: 5 kW Edge banding machine KANTOMAX BASIC - Min./max. edge thickness: 0.4 - 3 mm - Min./max. edge height: 15 - 55 mm - Min./max. workpiece height: 10 - 50 mm - Min. workpiece width: 80 mm - Min. workpiece length: 100 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min - Control panel at machine infeed at eye level - Chain feed - Support plate for PVC and ABS edge banding material - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for glue joint compression - Centrally adjustable top pressure - Gluepot with Teflon coating for hot-melt adhesive granules - Glue application to workpiece via glue roller - Electronic temperature control, working temperature 180 - 200 °C - Pneumatic guillotine for edge banding - Pneumatic cylinder for workpiece separation - End trimming unit for front and rear edge overhangs. Highly precise linear guide, motors 0.5 kW, 200 Hz, 12,000 rpm, pull-cut for high accuracy - Flush and radius trimming unit, top and bottom, with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Radius scraper unit with tracing from above, below and laterally, for rounding pre-milled PVC edges - Buffing unit for finishing edges, top and bottom, 2 motors each 0.18 kW, 50 Hz, 1400 rpm, height adjustable - Total connected load: 5.0 kW / 400 V - Extraction port Ø 100 mm - Extendable workpiece support - Sound-insulating enclosure with inspection window - Compressed air connection: 6 bar - Dimensions: L=2650, W=640, H=1400 mm - Weight: 700 kg

Kondisi: bekas, Tahun pembuatan: 1991, Mesin bekas Tahun pembuatan: 1991 Maks. tinggi benda kerja sekitar 40 mm Min. panjang benda kerja sekitar 250 mm Min. lebar benda kerja sekitar 70 mm Kecepatan pemajuan sekitar 11 m/menit Siap operasi dalam waktu sekitar 4-5 menit Fpedpfx Aswka Tljdgeb Daya terpasang sekitar 11 kW Dengan penggaris masukan berpemanas Dengan wadah lem pemanas cepat Pemotongan rol pneumatis hingga 3 mm Dengan gergaji potong hingga ketebalan tepi 5 mm Dilengkapi stasiun milling opsional dengan pisau insert kombinasi untuk milling radius, lurus, dan chamfer Lengan penyangga dapat dilipat dan ditarik ke depan Dengan sasis Dengan sistem ekstraksi terintegrasi P x L x T 3600 x 1400 x 1200 mm Berat sekitar 670 kg Ketersediaan: segera Lokasi: Flörsheim

Kondisi: sangat baik (bekas), Double-sided single machine (first machine in a production line) Edgebanding material (thickness min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 240 / 1000 Control / Software: NC 21 / Homatic Feed speed (adjustable) m/min high speed: 10 - 60 Safety and soundproof enclosures PROCESSING STATIONS (each side): Trimming unit KD 10 (2 x 6.6 kW) Fpedpfx Adjifnxxegsb EDGEBANDING SECTION (each side): Edgebanding unit (hot melt glue + pre-melter) A3 + A34 (high speed package) Pressure section Edge magazine for rolls (compartment no.): 2 Pre-milling unit 2 x 0.55 kW Milling unit 2 x 0.55 kW (0° - 30°) Finishing unit (scraper blades + buffing unit) FA 11 Universal milling unit for grooving, rebating, and profiling UF11 (1 x 4 kW) 0°-90°

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H) 4200 x 1500 x 1500 mm Weight: 1050 kg Total power requirement: 8 kW Edge banding machine KANTOMAX BASIC FÜ+EK DELUXE - Min. / max. edge thickness: 0.4 - 2 mm - Min. / max. edge height: 15 - 55 mm - Min. / max. workpiece height: 15 - 50 mm - Min. workpiece width: 70 mm - Min. workpiece length: 200 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min - Control panel (touch panel) at the machine infeed at eye level - Chain feed - Support plate for PVC and ABS edge banding rolls up to 550 mm - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for compressing the glue joint - Centrally adjustable top pressure - Glue pot, Teflon coated, for hot melt adhesive granulate, capacity 3 kg - Glue application to the workpiece via glue roller - Electronic temperature control, working temperature 180 - 200 °C - Pneumatic end trimming unit - Pneumatic cylinder for workpiece spacing - Pre-milling unit with 2 HW pre-milling cutterheads for jointing before glue application, vertical spindle adjustment, electro-pneumatic horizontal adjustment, 2 motors, each 1.4 kW, 200 Hz, 9000 rpm (1 x clockwise, 1 x counterclockwise) - Heating lamp for panel pre-warming - Pre-cutting from the roll - 3 solid steel pressure rollers - Flush and radius milling unit, top and bottom, with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Contour trimming unit (corner rounding) top and bottom, for trimming flush and rounding off PVC edges, 0.55 kW motor, 200 Hz, 12,000 rpm - Radius scraper unit with tracing from top, bottom, and side, for rounding pre-milled PVC edges - Buffing unit for edge finishing, top and bottom, 2 motors each 0.18 kW, 50 Hz, 1400 rpm, angle and height adjustable - Spray nozzle system (cleaning liquid) Fodpjvz E Tmsfx Adgopb - Total power consumption: 8.0 kW / 400 V - Extraction nozzles: 4 x Ø 100 mm - Extendable workpiece support - Soundproof enclosure with viewing window - Compressed air connection: 6 bar - Overall dimensions: L=4200, W=1500, H=1500 mm - Transport dimensions: L=4000, W=700, H=1500 mm - Weight: 1050 kg

Kondisi: sangat baik (bekas), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINES – First (1st) machine in a line Edge material (thickness min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: approx. 230 / 1600 Control / Software: WinEdge Feed speed (variable) m/min: approx. 10 - 30 Protective and soundproof cabins FORMATTING UNITS (per side): No. 2 hogging units (2 x approx. 5.8 kW) No. 2 jointing-milling units aft (2 x approx. 4 kW) EDGE BANDING SECTION (per side): Gluing unit (hot melt glue + pre-melter) Pressure zone (CNC-controlled) Fodpfel Hydmex Adgspb Magazine for edge rolls (number of slots): 6 Pre-milling unit 08.055 (2 x approx. 1 kW) Milling unit (2 x approx. 0.5 kW, 0°-30°) No. 5 universal milling units for grooving, rebating, and profiling (5 x approx. 4 kW) Profile scraper unit Flat scraper unit Spraying unit (for polishing fluid) Buffing unit + hot air blower – edge finishing

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 3810 x 575 x 1520 mm Weight: 1000 kg Total Power Requirement: 8 kW Edgebander KANTOMAX BASIC FÜ+EK - Minimum / Maximum Edge Thickness: 0.4 - 2 mm - Minimum / Maximum Edge Height: 15 - 48 mm - Minimum / Maximum Workpiece Height: 10 - 45 mm - Minimum Workpiece Width: 80 mm - Minimum Workpiece Length: 120 mm - Feed Motor: 1.1 kW - Feed Speed: 8, 12, 16 m/min - Operator panel at machine infeed, at eye level - Chain feed - Support plate for PVC and ABS edgebanding materials - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for glue joint compaction - Centrally adjustable top pressure - Teflon-coated glue pot for hot melt adhesive granules - Glue application to the workpiece via glue roller - Electronic temperature control, working temperature 180 - 200°C - Pneumatic end trimming unit - Pneumatic cylinder for workpiece spacing - Jointing unit with 2 DIA jointing cutter heads for pre-milling prior to gluing, spindle adjustment vertical, electro-pneumatic horizontal control, 2 motors each 1.8 kW, 200 Hz, 12,000 rpm (one with, one against feed direction) - End trimming saw unit for front and rear edge overhangs, high-precision linear guides, motors 0.5 kW, 200 Hz, 12,000 rpm, pull cut for high accuracy - Top and bottom flush/radius trimming unit with vertical and horizontal sensors, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Corner rounding unit (profile trimming) top and bottom, for rounding PVC edges, motor 0.37 kW, 200 Hz, 12,000 rpm Fjdpfx Aevz E Scodgopb - Radius scraper unit with top, bottom and side sensing for rounding pre-milled PVC edges - Buffing unit for final edge finishing on top and bottom, 2 motors each 0.18 kW, 50 Hz, 1,400 rpm, adjustable tilt and height - Total power consumption: 8.0 kW / 400 V - Extraction port Ø 100 mm - Extendable workpiece support - Sound enclosure with inspection window - Compressed air connection: 6 bar - Overall dimensions: L=4000, W=1000, H=1420 mm - Transport dimensions: L=3810, W=575, H=1520 mm - Weight: 1000 kg

Kondisi: diremajakan ulang (bekas), Single-sided FORMAT PROCESSING and EDGE BANDING MACHINE (LEFT SIDE) Edging material (rolls) thickness (min/max) mm: 0.3 - 3 Edging thickness in battens/strips (min/max) mm: 1 ALU Panel thickness (min/max) mm: 6 - 55 Control/software: IMATRONIC 121 /01 Feed speed (adjustable) m/min: 6 - 30 Fpedpfx Adocr T N Dsgob FORMAT PROCESSING: Jointing cutter unit with CN control 08.376 (2 x 4.5 kW) Spraying unit (for liquid anti-stick agent) EDGE BANDING SECTION: Lamps for heating workpiece edges Gluing unit (PUR glue + pre-melter) 04.1569 Edge pressure zone mm: 1000 + edge magazine for rolls (compartment No. 6) End trimming unit 08.42 (2 x 0.66 kW) Working speed: 25 m/min (0–25°) Pre-milling unit 08.0555 (2 x 1 kW) Milling unit 08.055 (2 x 1 kW) 0°–30° + spraying unit (for sliding fluid) Contour milling unit (for fine milling), CN-controlled 08.348 (2 x 0.66 kW) Multi-profile scraper unit (CN-controlled) 08.516 Flat scraper unit 08.517 (pneumatic) + spraying unit (for polishing fluid) Buffing unit 08.614 (2 x 0.25 kW) Universal milling unit for grooving/rebating and profiling 08.183 (1 x 3 kW) Smoothing unit 08.53 Radius sanding unit for straight edge WI (4 x 0.75 kW)

Kondisi: baru, Tahun pembuatan: 2025, Measurements (Length/Width/Height) 1050x830x1100 mm Weight 133 kg Total power requirement 2.1 kW Edgebanding Machine KAM535NEO - Motor power S1 250 (+1750) W - Voltage 400 V / 3 / 50 Hz - Feed speed 0–15 m/min - Table size 1000 x 700 mm - Table height 850 mm Fedpfsvz E Hmex Adgepb - Min. workpiece thickness 10 mm - Max. workpiece thickness 50 mm - Edge width 13–54 mm - Edge thickness 0.3–3 mm - Working air pressure 4–5 bar - Operating temperature 170 °C - Min. internal curve radius 20 mm - Sound pressure level dB(A) < 70 - Packing width 830 mm - Packing length 1,050 mm - Packing height 1,100 mm - Gross weight 161 kg - Net weight 133 kg - Semi-automatic edgebanding machine - The machine is suitable not only for straight edges but also specifically for edging curved edges - Direct glue application on straight and curved edges - Double-sided glue application on laminate and edge - Automatic length cutting - Glue temperature electronically adjustable - Feed speed variably adjustable - 1750 W heating power - 250 W feed motor

Kondisi: sangat baik (bekas), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE. The line consists of the following machines: J10039A) Infeed station with double loading station "MAHROS" Model Brush Fodpfehmkxqsx Adgepb J10039B) 1st double-sided sizing and edge-banding machine "IDM" Model Activa SB 1/9900 J10039C) Turning station "MAHROS" Model _____ (90° LONGITUDINAL-TRANSVERSE) with double cone J10039D) 2nd double-sided sizing and edge-banding machine "STEFANI" Model Performance SB2 J10039E) 90° side pusher "MAHROS", complete with motorized roller conveyor and motorized 90° belts for transferring panels to the MAHROS unloader J10039F) Brushing cleaning machine "WANDRES" Model BI46/1/1300 J10039G) Stacking unit with double buffer station "MAHROS" Model Brush

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 3200 x 780 x 1500 mm Weight: 800 kg Total power requirement: 8 kW Edge banding machine KANTOMAX BASIC FÜ - Min. / max. edge thickness: 0.4 - 3 mm - Min. / max. edge height: 15 - 48 mm - Min. / max. workpiece height: 10 - 45 mm - Min. workpiece width: 80 mm - Min. workpiece length: 100 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min - Control panel at machine infeed, at eye level - Chain feed - Support plate for PVC and ABS edging material - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for compressing the glue joint - Centrally adjustable top pressure - Teflon-coated glue pot for hot-melt adhesive granulate - Glue application to the workpiece via glue roller - Electronic temperature control, working temperature 180 - 200°C - Pneumatic end trimming - Pneumatic cylinder for workpiece spacing - Jointing unit with 2 DIA (diamond-tipped) jointing cutter heads for pre-joining before gluing, spindle adjustment vertical, electro-pneumatic control horizontal, 2 motors each 1.8 kW, 200 Hz, 12,000 rpm (1 x clockwise, 1 x counterclockwise) - End trimming saw unit for front and rear edge overhang. High precision linear guide, motors 0.5 kW, 200 Hz, 12,000 rpm, pull cut for high accuracy - Flush and radius milling unit, top and bottom, with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Radius scraper unit with tracing from top, bottom, and side for rounding pre-milled PVC edges Fpedpfx Adovz E Evegeb - Buffing unit to improve edge grip, top and bottom, 2 motors each 0.18 kW, 50 Hz, 1,400 rpm, tiltable and height adjustable - Total power consumption: 8.0 kW / 400 V - Extraction nozzle Ø 100 mm - Extendable workpiece support - Sound enclosure with viewing window - Compressed air connection: 6 bar - Dimensions: L=3200, W=780, H=1500 mm - Weight: 800 kg

Kondisi: sangat baik (bekas), COMPLETE DOUBLE-SIDED FORMATTING AND EDGE BANDING LINE (including SOFTFORMING), with throughfeed drilling machines, splitter, and high-speed automatic conveying technology. Configured as follows: A) Infeed station – stacking system (gantry) "RBO (BIESSE)" Model Winner C (1) B) 1st double-sided formatting and edge banding machine "BIESSE" Model Stream SB1 11.0 Softforming C) 1st rotation station (90° LONGITUDINAL-TRANSVERSE) "RBO (BIESSE)" Model GPK-1 D) 2nd double-sided formatting and edge banding machine "BIESSE" Model Stream SB2 9.5 E) 2nd rotation station (90° STRAIGHT or TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" Model GPK-2 F) CNC-controlled throughfeed boring machine "BIESSE" Techno FDT CN (No. 2 horizontal boring supports, No. 6 vertical lower boring supports and No. 3 vertical upper boring supports) Fodottgy Hopfx Adgepb G) CNC-controlled throughfeed boring machine "BIESSE" Techno FDT CN (No. 2 horizontal boring supports, No. 6 vertical lower boring supports and No. 3 vertical upper boring supports) H) 3rd rotation station (90° STRAIGHT or TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" Model GPK-3 I) Longitudinal panel saw (splitter) "GM (for BIESSE)" Model Split 4-84 LT L) Outfeed unstacking station – stacking system (gantry) "RBO (BIESSE)" Model Winner SC (2)

Kondisi: sangat baik (bekas), KOMPLETTE_DOPPELSEITIGE_FORMAT-UND_KANTENANLEIMMASCHINEN Fpsdpexftt Eofx Adgeb

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a machine line) Edge thickness with rolls (min/max) mm: 0.3 - 3 Edge thickness with lippings/strips (min/max) optional: mm 20 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 250 / 3000 (approx.) Feed speed (adjustable) m/min: 12 - 40 (approx.) Safety and soundproof enclosure Cam spacing (mm): 500 FORMATTING UNIT (for each side): Spraying unit (for liquid anti-adhesive) Protection milling unit (pre-milling) (1 x approx. 4 kW) Cutting unit (2 x approx. 5.8 kW) Universal milling unit 1 x approx. 4 kW Fjdpfxek Nk R Ds Adgspb EDGE BANDING SECTION (for each side): Gluing unit (hot melt + pre-melter) Edge magazine for rolls (No. 2 positions) + edge pressing zone End trimming unit (2 x 0.35 kW approx.) Pre-milling unit (2 x 1 kW approx.) Milling unit (2 x 0.5 kW approx.) 0°-30° Multi-functional unit (radius milling and contour milling aggregate) with 2 revolvers (8+8 positions) - max 27 m/min Universal routing unit for grooving/rebating and profiling 1 x approx. 4 kW (0° - 90°) Profile scraper unit + flat scraper unit + buffing unit

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 240 / 2500 Control system: PC 22 Feed speed (adjustable) m/min: 10 - 40 Cam pitch (mm): 500 FORMAT PROCESSING (per side): Pre-milling cutter (trimming) 1 x 4.5 kW (hydro) Milling unit KD 11 (2 x 8.1 kW) hydro Fpodpfxjlikyds Adgjb EDGE BANDING SECTION (per side): Gluing unit (hot melt + pre-melter) A3 + A34 Edge magazine for rolls (slot No. 6) Edge pressure zone "C" Pre-milling unit 2 x 0.55 kW Milling unit MF 20 (2 x 0.55 kW) 20° Profile scraping unit PN 20 Finishing unit (flat scraper + buffing unit) FA 11 Free slot

Kondisi: sangat baik (bekas), Double-sided stand-alone machine (or 1st and/or 2nd machine in a processing line) Edge thickness for rolls (min/max) mm: 0.4 / 3 Edge thickness for strip veneer (max) mm: 1.3 Panel thickness (min/max) mm: 10 / 45 Working width (min/max) mm: approx. 244 / 2300 Control/Software: ICOS Open Feed speed (m/min): 8 - 40 No transfer bar (Master & Slave systems) Safety and noise protection enclosure Retractable stops, spacing (mm): 270 FORMAT PROCESSING (for each side): Jointing unit 75.30 (6.6 kW x 2) EDGE BANDING SECTION (for each side): Gluing station (P.U.R. adhesive + pre-melter) 04.1570 + 283.205 Fjdpfx Adjfi Tkvegopb Edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (0.2 kW x 2) 40 m/min Milling unit 08.055 (0.66 kW x 2) 0°–30° Multifunction unit (radius milling and contour trimming) MFA 08.342 (0.66 kW x 2) max. 25 m/min Contour milling unit (copier) 08.465 (0.18 kW x 4) max. 20 m/min Buffing unit 08.617-2 (0.18 kW x 2) Free position

Kondisi: sangat baik (bekas), Double-sided edge banding and formatting machines – First (1st) machine in the line Edge thickness in rolls (min/max) mm Fpedpfxofi Tkgo Adgjb Edge thickness in strips/bands (min/max) mm Panel thickness (min/max) mm 12 - 60 Working width (min/max) mm 1300 Control/Software: ICOS open Feed speed (adjustable) m/min 9 - 45 No transfer bar (Master & Slave systems) Top pressure driven by V-belt FORMATTING UNIT (for each side): Jointing/milling unit 75.30 (kW 6.6 x 1) EDGE BANDING SECTION (for each side): Gluing unit (P.U.R. glue + pre-melter) 04.1569 + 283.205 Pressure rollers (revolver) for straight and formed edges (softforming) mm 1,050 Edge magazine for rolls (magazine slots) 6 End trimming unit 08.42 (kW 0.2 x 2) 40 m/min Pre-milling unit 08.055 (kW 0.66 x 2) 0°-30° Milling unit 08.0582 (kW 0.66 x 2) 0°-30° Flat scraper unit 08.50 Buffing unit 08.617-2 (kW 0.18 x 2)

Kondisi: sangat baik (bekas), Double-sided EDGE BANDING AND FORMATTING MACHINE (1st and/or 2nd machine in-line) Edge material (rolls) thickness (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 – 60 Working width (min/max) mm: 240 – 2700 Control / Software: SINITRA Feed speed (adjustable) m/min: 10 – 40 (INVERTER C.N.) Cam interval (mm): 500 FORMATTING UNIT (for each side): Protection cutter (pre-milling) AS 10 (5.8 kW) 2 x Hoggers DT 10 (5.8 + 5.8 kW) Spray device (for liquid anti-adhesive) EDGE BANDING UNIT (for each side): Gluing unit (hot melt glue + pre-melter) SP30 (High Melt + Edge Guide Z-axis) Edge pressure section (CNC controlled). Edge magazine for rolls (6-fold) Trimming unit IT 90-S (0.3 kW x 2) 28m/min. 0 – 25°. PNEUMATIC CNC controlled multi-profile milling unit RF 30 (0.65 kW x 2) 0 – 25° Multi-function unit (radius and contour milling unit) AR 80 (0.3 kW x 2) 25 m/min – ROTAX Spindles with automatic tool change (tools with 8+8 positions) CNC controlled multi-profile scraping unit RB 30 Fpjdpfxsu Tg Uqj Adgjb Flat scraping unit RC 20 – Spray units (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2) With 'hopper' for boards (useful height mm 80) as buffer to accelerate the working cycle