Beli Tepi Tot bekas (1.679)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 20 mm, lebar benda kerja (maks.): 60 mm, Die machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS Edge thickness (glued): max. 20 mm Maximum gluing height: 60 mm Maximum edge band thickness: 3 mm Workpiece width: min. 60 mm Maximum feed speed: max. 25 m/min Feed: continuous Electric height adjustment: available Pressure: upper belt pressure Preheating zone: available Granulate glue system: with pre-fabricated container Glue pot: interchangeable/variable Spraying unit: available Pre-milling unit: available Trimming unit: with 2 motors Milling stations: flush/radial/chamfer, 1 available Corner rounding unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Aggregates: synchronized aggregates with NC axis/axes Machine version: left side Quick-change units: available MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special equipment: with nesting - new chains - HOMAG feed device, 2 rollers - HOMAG A 20 glue application unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile pull scraper PN 10 - HOMAG FA 11 finishing unit Kedpfx Aasx Tqgbj Noll

Kondisi: sangat baik (bekas), Mesin Gerinda Dua Sisi COMEC LN2G/8P+CA Klsdpoybaqqsfx Aa Nsl Lebar kerja: 150 mm Jumlah unit: 2

Kondisi: sangat baik (bekas), Nomor katalog 7733 DATA TEKNIS - lebar sabuk: 150 mm - osilasi - gerakan osilasi vertikal - 2 kecepatan putar - meja kerja: 1180x370 mm - pengaturan meja kerja atas/bawah, depan/belakang, dan sudut - motor: 3 kW - sepatu pengampelas – untuk pengamplasan presisi - dengan kipas - panjang area kerja pengamplasan di sabuk: 700 mm - mata fraise atas/bawah untuk chamfer tepi Kodpfxsya Hm Ne Aa Njll - diameter konektor hisap: 70 mm - dimensi (P/L/T): 1550/1400/1300 mm - berat: 490 kg KEUNGGULAN – dengan osilasi – dengan sepatu pengampelas – dengan kipas – termasuk mata fraise untuk membentuk/chamfer tepi – untuk pengamplasan lengkung & lurus – tanpa cat – mesin amplas bekas, kondisi sangat baik Harga netto: 7500 PLN Harga netto: 1780 EUR (berdasarkan kurs 4,2 EUR) (Harga dapat berubah jika terjadi fluktuasi besar)

Kondisi: bekas, Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 450 kg, jenis arus masuk: tiga fasa, jenis penyesuaian ketinggian: mekanis, tegangan masuk: 400 V, – Italian-made – Year of manufacture: 2016 – Pre-milling – Technical documentation (DTR), CE certificate TECHNICAL PARAMETERS: – Edge thickness: 0.5 – 3 mm – Solid wood edging: 0.5 – 5 mm – Workpiece height: 8 – 50 mm – Minimum edging length: 160 mm – Minimum panel width: 110 mm – Feed speed: 7 m/min Kodpswb Ha Tjfx Aa Njll – Pre-milling – Radius cutters – Edge trimming – Radius scraper – Straight scraper – Air blow-off on each unit – Working pressure: 8 bar – Working machine length: 2030 mm – Transport dimensions (L/W/H): 330 / 80 / 125 cm – Weight: 450 kg

Kondisi: bekas, nomor mesin/kendaraan: 008160, Jenis tepi yang terpasang: tepi tipis, tepi tebal Sistem perekat: EVA Penyambungan frais: ya Unit multifungsi: ya Kecepatan maju maks.: 14 m/menit Ketebalan panel maks.: 60 mm Unit kerja: 7 unit Kljdpfx Asxqm Iyoa Nel

Kondisi: bekas, Lokasi gudang: Sonnefeld Klsdpfx Aaeway Dcs Nsl

Kondisi: bekas, Tahun pembuatan: 1994, Ketebalan pinggiran 0,3 - 20 mm Tinggi edging: maks. 66 mm Panjang edging: min. 200 mm Lebar benda kerja min. 60 mm Panjang benda kerja min. 140 mm Tebal benda kerja: min. 6 mm, maks. 60 mm Kecepatan makan 8 atau 16 m/menit - Pengeleman pinggiran dengan Ultra - Granupress - Pemotongan ujung dengan 2 gergaji, dapat diputar 0 - 15° - Milling, radius / rata - Penyalinan sudut - Scraper - Penggosokan pneumatik Lokasi: Nattheim Kjdpfevvkdtsx Aa Nell

Kondisi: bekas, Tahun pembuatan: 1996, Ketebalan pinggiran: 0,4 - 12 mm Tepi gulungan: 3 x 45 mm atau 0,8 - 60 mm Lebar benda kerja minimum: 65 mm Panjang benda kerja minimum: 160 mm Ketebalan benda kerja: 10 - 55 mm Kecepatan maju: 13 m/menit Pramilling (penyambungan) Bak lem Quickmelt Unit pengelem Pemotongan Meratakan pinggiran Penyudutan pemotongan Perataan radius Penyalinan sudut Pisau penghalus rata Unit pemoles Dimensi mesin: 7450 x 1220 x 2400 mm Berat: 3000 kg Lokasi gudang: Nattheim Ksdpfxovvkd Ts Aa Nell

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode Kledevvkfdepfx Aa Nol - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.

Kondisi: bekas, Tahun pembuatan: 2001, Laitteen reunalistan ja kappaleen mitta- ja varustetiedot, varastopaikalla Nattheim. Kjdpfx Aaovvkfqo Nell

Kondisi: bekas, Tahun pembuatan: 2002, Panjang mesin: 6240 mm Berat: 2400 kg Daya terhubung: 14 kW Diameter hisap: 120 / 140 mm Lokasi penyimpanan: Nattheim Klsdjvvkfwepfx Aa Nol

Kondisi: bekas, Tahun pembuatan: 2011, penyetelan frais pneumatik (lurus/jari-jari) Stasiun frais kombinasi R=2 Frais pembulat sudut R=2 hingga 40 mm Frais penyambung hingga 40 mm Pisau tarik permukaan Pisau tarik profil R=2 untuk benda kerja pendek Pengontrol SPS dengan layar sentuh Pro Face Nesting Semprotan pendingin/anti statik - airtronic Semprotan pelindung tepi Riepe termasuk bak cadangan Tebal benda kerja: 8 - 60 mm Penjepitan tepi mekanis Konektor ekstraksi: 140 mm Dimensi: Panjang dengan ekstensi: 4984 mm Kedalaman dengan meja rol: 1425 mm Tinggi maks.: 1618 mm Tinggi meja kerja: 888 mm Berat: 1400 kg Lokasi penyimpanan: Nattheim Kjdpfxjxyiilo Aa Nsll

Kondisi: bekas, Tahun pembuatan: 2006, Pelapisan EVA dengan 2 rol tekan, stasiun pemotongan, pra-frezer dan frezer pengebulatan, pisau tarik permukaan, perangkat penggerak. Lokasi penyimpanan: Nattheim Kjdpfovvkg Iox Aa Noll

Kondisi: bekas, nomor mesin/kendaraan: 005064, Posisi 1: Mesin pelapis tepi satu sisi BIESSE-STREAM B1 7.0 Klsdeybaxbspfx Aa Nol Posisi 2: Sistem pengembalian panel BIESSE-STREAM B1 7.0

Kondisi: bekas, nomor mesin/kendaraan: 007176, Jenis tepi yang dipasang: tepi tipis, tepi tebal Sistem perekat: EVA Perapihan sambungan: ya Unit multifungsi: ya Unit milling atas: ya Kecepatan maju maks.: 25 m/menit Kjdpfxoybaw Ds Aa Nsll Ketebalan papan maks.: 60 mm Unit kerja: 9 unit

Kondisi: bekas, nomor mesin/kendaraan: 007575, Type of attached edging: thin edge, thick edge Glue system: EVA Jointing milling: yes Ksdoybawwjpfx Aa Nsll Multi-function unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Work units: 8 pcs

Kondisi: bekas, nomor mesin/kendaraan: 005062, Type of attached edging: thin edge, thick edge Glue system: EVA Jointing milling: yes Kjdpfoybawdjx Aa Nsll Multi-function unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Work units: 8 pcs

Kondisi: baru, Die KF 200 von KNUTH ist eine leistungsstarke Kantenfräsmaschine, die speziell für die Blechbearbeitung entwickelt wurde. Diese robuste Maschine ermöglicht es Ihnen, gerade Kanten an großen Werkstücken schnell und effizient zu bearbeiten, einschließlich Entgraten, Fasen und der Vorbereitung von Schweißfugen. Mit einer Drehzahl von 3.500 1/min und der Fähigkeit, Fasenhöhen von 0 bis 5 mm zu bearbeiten, eignet sie sich sowohl für Stahl als auch für Aluminium. Dank der langlebigen Wolframlegierung der Schneiden müssen Sie nicht oft wechseln, was die Wartung vereinfacht. Im Lieferumfang sind einen Satz Schneidplatten sowie eine Bedienungsanleitung enthalten, sodass Sie gleich loslegen können. Wenn Sie nach einer zuverlässigen Kantenfräsmaschine suchen, um große Blechtafeln oder lange Profile zu bearbeiten, bestellen Sie jetzt die KF 200 und profitieren Sie von der Qualität und Präzision von KNUTH. Ksdpeq Ny R Sefx Aa Nsll

Kondisi: bekas, Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, One-sided edge banding machine in full configuration, including a total of 3 interchangeable glue pots, 1 of which is for PUR adhesive. Klodeybbayspfx Aa Njl Material dimensions: Coil material: - Paper and plastic edges: 0.3 - 3.0 mm - Veneer edges: 0.5 - 3.0 mm - Solid strips: 3.0 - 8.0 mm Edge height min. 12 mm, max. 65 mm Machine features: Infeed fence, adjustment automatic via program Release agent unit Jointing milling unit with 2 motors, 4 kW each Blow nozzle for removing loose particles Gluing unit with glue container 1.8 L, with QUICK-LOCK with single-roll and strip magazine 1 main pressure roller and 3 follow-up pressure rollers Pressure zone adjustment automatic via program End trimming unit with 2 motors, 660 W, swivels 0 to 8 degrees Corner rounding/contour milling unit with 2 motors, 180 W and 2 motors, 400 W max. workpiece thickness 60 mm max. feed speed 20 m/min Automatic adjustment via program Profile scraper unit Glue joint scraper unit Cleaning agent unit Buffing unit with 2 motors, 180 W Control: ICOS open TS, PC-based

Kondisi: baru, Tahun pembuatan: 2026, Unit PUR – unit lem sebagai retrofit untuk mesin edge banding, dengan tangki peleleh terintegrasi, untuk sambungan tanpa celah permanen (zero joint). Perangkat simetris, sehingga dapat digunakan pada mesin kiri maupun kanan. Diameter rol lem 25 mm. Beban pemeliharaan dan pembersihan sangat berkurang berkat lapisan PTFE pada semua komponen (kecuali rol lem). Lem tidak perlu dikosongkan setelah produksi selesai. Cocok untuk kapasitas produksi yang fleksibel. Pengaplikasian dalam arah yang sejajar. Biasanya dapat diadaptasi untuk semua produsen mesin umum: - Mesin BRANDT - Seri Olympic dari SCM - Seri BIESSE AKRON. Tinggi aplikasi hingga 60 mm. Untuk jumlah aplikasi yang rendah. Ksdpjyba Uiefx Aa Nsll

Kondisi: bekas, Tahun pembuatan: 2022, termasuk 2 bak lem Ketebalan pelapisan tepi rol: 0,4 - 3 mm Ketebalan pelapisan tepi strip: 5 mm Tinggi benda kerja min - maks: 8 - 50 mm Kecepatan makan: 9 m/menit Unit pra-routing Unit lem Unit pemotong Unit pembulat Unit frais sejajar Pisau tarik radius Pisau tarik bidang Unit polisher Perangkat semprotan Ksdow Aig Sepfx Aa Noll Lokasi penyimpanan: Pelanggan

Kondisi: bekas, nomor mesin/kendaraan: 006849, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA Jointing unit: yes Multi-function unit: yes Klsdpfxswd Itmo Aa Njl Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 7 pcs

Kondisi: bekas, Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, BAVELLONI B73 CN – Tahun 1994 Mesin Chamfer Ukuran pelat minimum: 40 x 40 mm Ketebalan: 3 - 20 mm Kecepatan kerja: 0 - 4 m / menit Sudut: 3 - 45 ° Ukuran chamfer: 50 mm Daya: 17 kW Kljdpfjyanryjx Aa Njl Dimensi: 7200 x 1700 x 2300 mm Berat: 4200 kg

Kondisi: bekas, Oscillation: yes Heavy-duty sanding device: yes Veneer sanding device: yes Tiltable up to: yes Motor power: 2.2 kW Table size: 1000 x 350 mm Sanding width: 200 mm Weight: 300 kg Edge sanding machine Langzauner LZK 3/2, BB 200 ----- Technical manufacturer’s description: Table width: 345 mm Table length: 1000 mm Maximum sanding belt width: 200 mm Sanding belt length: 2600 mm Main motor: 3 kW Round sanding support: yes Oscillation: yes Height adjustment: manual table Klsdpfxowzmuws Aa Nel Sanding belt tiltable: yes Required space (length): 1800 mm Required space (width): 900 mm ----- Price for the above-mentioned machine on request! (Technical data according to manufacturer – no guarantee!) All prices quoted are net, plus statutory VAT. Original images not yet available, image is from a brochure of the same model.

Kondisi: bekas, Used machine Kodpfewwxykjx Aa Nell