Beli Thread Cutter bekas (6.104)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed Excellent Condition Technical Data: >> Year of Manufacture: 1992 Machine No.: 2102-6289 >> Fixed angle table (freshly planed) >> Speed range: 40 - 2000 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300 / 160 / 340 mm >> Vertical milling head on spindle carrier adjustable by 100mm >> Vertical and horizontal quill - ISO 40 taper (SK40) >> Drawbar system: S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis Heidenhain TNC 113 digital readout >> Coolant device >> Operating manual, spare parts list About the machine: For sale is a universal milling machine Deckel FP1, year 1992, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, feed can be infinitely adjusted on all three axes; rapid traverse is also available on these axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions that the machine will automatically approach. The FP1 was previously in a training workshop, where it was only used occasionally. Oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes work easier and even more precise. Take the opportunity to view and test the machine under power on site. Tjdpfju T D Nrjx Aatof

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 23.000 h, Bobst SP 142 CER II Tjdpfx Ajxxypyoatsf

Kondisi: bekas, Table drilling and thread cutting machine IXION type BT 15 GL Machine No. Year of manufacture: approx. 1975 Drilling capacity: 15 mm Spindle mount: Taper mount B 16 Thread cutting: from M 2.5 to M10 Throat depth: 200 mm Quill stroke: 90 mm Table size: 285 x 220 mm Column diameter: Ø 75 mm Spindle speed: 320 - 1600 rpm, 4 steps Tsdpewk Nxqsfx Aatof Motor power: 0.55 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed adjustable via 4-step V-belt drive - Equipped with FAHRION GH 10 tapping chuck - Includes lead cartridge for thread pitch; operation without lead cartridge is also possible - Height adjustment of drill head via hand crank - Column extends downward from the table for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition

Kondisi: baik (bekas), Tahun pembuatan: 1981, Dimensions (LxWxH): 660 x 1050 x 1600 mm Metric thread M 33 brass Metric thread M 16 cast iron Metric thread M 14 steel Number of slots: 2 x T-slots 25 x 10 mm Throat: 220 mm Weight: 730 kg Extensive accessories, see photos Tjdsul Eg Depfx Aatef Machine No.: 136-22 Year of manufacture: approx. 1981

Kondisi: baru, Tahun pembuatan: 2024, de Tedet Ivamopfx Aatef

Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 511.1012.471, de-to-hu-it-lt-001 Tsdpfxoxugxts Aatef

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, F736 Tjdeu Nvwvspfx Aatjf Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit at FA Huttelmaier Very good CONDITION Technical Data: >> Year of manufacture: 1985, Machine No. 2102-2891 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head can be shifted 100 mm on spindle arm >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Features: >> 3-axis digital readout Heidenhain TNC 111 >> Coolant system >> Operating manual, spare parts list About the Machine: Offered is a Deckel FP1 universal milling machine, year 1985, in very good condition. The FP1 was completely overhauled in 2008 by the company Huttelmaier. The machine shows minimal play in the handwheels, and all spindles move smoothly. Even at maximum rotation speed, the milling machine runs very smoothly. This newer FP1 model features infinitely variable feed on all three axes, and also includes rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position controller, you can enter desired dimensions, and the machine will automatically position to them. The FP1 was located in a training facility, where it was only used occasionally. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital display makes operation easier and more precise. Take this opportunity to inspect and test this gem on site under power.

Tahun pembuatan: 1974, Kondisi: diremajakan ulang (bekas), INGRAMATIC RP2 – FULLY REFURBISHED, AS NEW M8x90/45 mm Die dimensions: 130x115x65 (h) 410 pieces per minute (ppm) The machine has been fully refurbished to as-new condition. Available for inspection in Calolziocorte (LC), Italy. Refurbishment carried out according to CE standards. The overhaul includes: - DISASSEMBLY AND CLEANING OF EVERY COMPONENT - REPLACEMENT OF ALL BEARINGS - GRINDING OR REPLACEMENT OF GUIDES IF UNSUITABLE - OVERHAUL OF THE FEED UNIT - OVERHAUL OF THE SLIDE UNIT WITH REPLACEMENT OF BRONZE GIBS - NEW LUBRICATION SYSTEM WITH HYDRAULIC UNIT INCLUDING PUMP, LEVEL SWITCH, PRESSURE SWITCH, AND DISTRIBUTORS - NEW WATER PUMP FOR DIES - NEW BOWL FEEDER COMPLETE WITH CONTROL PANEL AND PHOTOCELL FOR OVERFILL DETECTION - OVERHAUL OF ROLLER EJECTION UNIT - SAFETY GUARDS WITH LAMP AND MICROSWITCH Tedpsipm Riofx Aatsf - INSTALLATION OF SOLENOID VALVE WITH NEW AIR CIRCUIT FOR FEEDER AND GUIDES - NEW ELECTRICAL SYSTEM COMPLIANT WITH CE STANDARDS, INCLUDING INVERTER - NEW MOTOR - REPLACEMENT OF BELTS - PAINTING IN RAL COLOR OF YOUR CHOICE

Kondisi: bekas, Mesin pembuat ulir LORCH, SCHMIDT & Co Tinggi pusat: 200 mm Jarak antara pusat: 400 mm Kecepatan putar spindle: 56 rpm Diameter chuck: 160 mm Perjalanan tailstock: 45 mm Kerucut dalam tailstock: MK2 Daya motor: 0,25 HP Sambungan listrik: 380 Volt, 50 Hz - Putaran kanan dan kiri - Chuck 3 rahang - Penggerak spindle melalui motor gearbox - Tanpa lubang spindle tembus - Tailstock dengan pinol tuas - Chuck bor MAS 1 hingga 16 mm Tsdjxf Uwxopfx Aatef Kebutuhan ruang P x L x T: 1200 x 500 x 420 mm Berat: 80 kg Kondisi baik

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, dehu-01 Tjdpexukrqofx Aatsf

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 542, Equipment: Precision six-jaw chuck Cylindrical grinding attachment Workpiece positioning device Tjdpsxxbphefx Aatsf Coolant system Grinding wheel mount Grinding wheels Operating manual

Kondisi: bekas, Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, heckler-koch-am442-en Tjdpfoxt N Rvex Aatsf

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1, repowered by FPS, year of manufacture 2010, with 3-axis digital display Heidenhain ND 780. As new condition! Technical details: >> Machine No. 55249/08, year 2010 >> Fixed-angle table >> Spindle speed: 40 - 2000 rpm >> Feed: 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 Tjdpfexu Hbhex Aatsf >> Drawbar: S20x2 >> Weight approx. 700 kg Equipment and accessories: >> 3-axis digital display Heidenhain ND 780 >> Hydraulic machine vise >> Collets >> Tool holders >> Cutters >> Operating manual >> Coolant system About the machine: For sale is a universal milling machine Deckel FP1 repowered by FPS, in like-new condition. The package includes a hydraulic vise with swivel base, collets, tool holders, and cutters. Mechanically and electrically inspected. The Heidenhain digital readout simplifies and improves accuracy of operation. You are welcome to inspect and test the Deckel under power at our location. The machine is immediately available.

Kondisi: bekas, jarak pergerakan sumbu X: 762 mm, jarak lintasan sumbu Y: 406 mm, jarak gerak sumbu Z: 508 mm, Milling machine, used Manufacturer: Fadal Model: 904-1 VMC 3016 Year of manufacture: Serial no.: 9401487 Technical specifications: X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Spindle taper: SK 40 Spindle speed: 8,000 rpm Tsdpfxjtud Uto Aatjf Machine weight: 3,800 kg

Kondisi: bekas, FLOTT TBZ 15 GL bench drilling and tapping machine Serial no.: 32177027 Year of manufacture: 1986 Drilling capacity: 15 mm Spindle taper: MT2 Throat depth: 195 mm Quill stroke: 80 mm Table size: 275 x 200 mm Column diameter: 70 mm Spindle speed: 80 - 4500 rpm, 18 steps Tjdsdzp S Nspfx Aatsf Motor power: 0.55 + 0.75 kW Electrical connection: 380 Volt, 50 Hz - 6 belt steps from the motor and 2 belt steps to the drill spindle, 2 motor speeds - Includes 3 guide bushes: 0.7 mm, 0.8 mm, and 28G - Drill head height adjustment via hand crank with rack on the column - Original metal base Required floor space (L x W x H): 700 x 350 x 1850 mm Weight approx. 150 kg Good condition

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, 5 controlled axes, X, Y, Z, A + B Fully automatic grinding wheel changer NUM Axium Power 1050 control system with PC TOOL DATA Max. diameter Ø 250 mm Max. diameter for complete machining Ø 250 mm Max. length for complete machining from front edge of workpiece carrier 430 mm Max. tool length between centers 480 mm Center height 195 mm X-axis travel 625 mm Cross-slide Z-axis 305 mm Vertical slide Y-axis 305 mm All linear axes are driven by high-precision ball screw spindles with 2 preloaded nuts. The axes are guided on extremely robust roller recirculating carriages on hardened rails. GRINDING HEAD B-AXIS Swiveling in horizontal plane 240° Rotational speed 120°/s Motor spindle, liquid-cooled, 150 x 150 mm Grinding wheel holder with automatic quick-clamping HSK - C/E 50 Tedpfx Aaext N Izetjf Spindle speed infinitely variable 2,000 - 10,000 rpm Max. grinding wheel diameter 150 mm Grinding wheel changer with 4 magazine positions Second probe arranged on the workpiece carrier for automatic measurement of the grinding wheel, including software CHAIN LOADING MAGAZINE with PICK-UP arm Capacity 160 tools Maximum workpiece diameter 32 mm Maximum workpiece length 200 mm Maximum tool weight 2.5 kg CNC-controlled steady rest TURBO separator (filter system)

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, Universal tool grinding machine AU 150 with integrated Haller UFS 155 The AU 150 is the ideal solution for the manual re-sharpening of tools – an indispensable asset in tool grinding shops, maintenance departments of metalworking companies, as well as in training workshops. Whenever automation is not economical or appropriate, the AU 150 impresses with its precision and versatility. Thanks to the integrated Haller UFS 155, the machine offers maximum functionality and efficiency when grinding a wide variety of tools. Your advantages at a glance: - Maximum precision in re-sharpening Tedpfswl Amwsx Aatsf - Cost-effective even for small batches and special tools - Robust construction for daily use - Easy operation and quick setup times Typical fields of application: - Re-sharpening of milling tools - Grinding of taps, reamers, step tools - Machining of lathe tools and other cutting tools made of HSS or carbide (HM) The AU 150 stands for universal versatility, long-lasting quality, and top-level manual grinding expertise.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP2 with 3-axis Aktiv TNC 113 Heidenhain digital readout and infinitely variable feed in TOP condition Technical Data: >> Year of manufacture: 1979 Machine no.: 2202-10777 >> Rigid angle table (freshly planed) >> Spindle speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse on 3 axes >> Motor power: 2.2 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable 150 mm on spindle carrier >> Vertically extendable quill and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 1400 kg Tedpfx Ajuc Ubwjatof Accessories and features: >> 3-axis TNC 113 Aktiv digital readout Heidenhain >> Coolant system >> Central lubrication About the machine: For sale is a universal milling machine Deckel FP2 in very good condition. The FP2 comes from a laboratory of a state-owned facility, where it saw only limited use. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. On this later FP2 model, the feed is infinitely adjustable on all three axes, and the machine further features rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With this Heidenhain positioning control, you can enter dimensions and the machine will automatically move to the set position. An oil change has been performed. Mechanically and electrically checked. The Heidenhain digital readout makes operation easier and even more precise. Take this opportunity to view and test this machine under power on site.

Kondisi: hampir baru (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feed – As-new condition Technical Specifications: >> Year of manufacture: 1987 Machine No. 2102-3536 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head can be displaced on spindle carrier by 100 mm >> Vertical and horizontal quills - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital display Heidenhain TNC113 >> Centralized electric lubrication >> Machine lamp >> Coolant system >> Operating manual, spare parts catalog About the machine: Offered here is a Deckel FP1 universal milling machine, year 1987, in original as-new condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed is infinitely variable on all three axes, and the machine also features rapid traverse in these axes. The active 3-axis digital readout is a major advantage. With this Heidenhain TNC113 system, you can enter target positions, and the machine will automatically move to them. The FP1 was used in a training facility and was only operated occasionally. An oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test this gem under power on site. Tsdpfx Aaeu R D I Setsf

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed, light grey, excellent CONDITION Technical Data: >> Year of manufacture: ca. 1990, Machine No. 2102-5231 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Clamping system M16 >> Weight approx. 800 kg Accessories and Equipment: Tjdpsxu E R Iefx Aatef >> 3-axis digital readout Heidenhain TNC113 >> Electric central lubrication >> Coolant system >> Operating manual, spare parts list About the Machine: Offered here is a Deckel FP1 universal milling machine in very good condition, finished in light grey. The machine has minimal backlash, and all spindles move freely. Even at maximum spindle speeds, the milling machine runs very smoothly. This newer FP1 model features stepless feed adjustment in all three axes, and also has rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain path control, you can enter dimensions which the machine will move to automatically. The FP1 was located in a training workshop, where it was only used occasionally. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem under power on site. The machine is immediately available.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Universal tool grinding machine Michael Deckel S11 speed, year of manufacture 2002, in very good condition!! Tjdpewrnf Eofx Aatsf Technical data: >> Year of manufacture: 2002 >> Serial no.: 2197 Clamping range: >> Clamping plate of the tool carriage: 500 x 180 mm >> Max. tool diameter between centers: 130 mm >> Max. tool length between centers: 270 mm >> T-slot width on machine base: 12 mm Motion range: >> Working travels Grinding stroke: 190 mm Grinding stroke for helical grinding: 190 mm Cross travel of tool carriage: 100 mm Vertical adjustment of grinding head: 325 mm Longitudinal adjustment of grinding spindle: 5 mm >> Coarse adjustment travels Tool holder: 220 mm Grinding head support: 800 mm >> Swivel angles Grinding head support: 360 degrees Grinding head: 360 degrees Tool holder: 360 degrees Grinding spindle: Three-phase drive motor: 1.1 kW at 2,800 rpm Infinitely variable spindle speeds: 2,000 to 12,000 rpm Max. grinding wheel diameter: 125 mm Max. cutting disc diameter: 200 mm Dimensions: Weight: 520 kg Dimensions (depth x width x height): 800 x 1100 x 1760 mm Space requirement (including operation): 2.5 x 2.3 m Accessories and equipment: >> See photos About the machine: For sale is a universal tool grinding machine of the brand Michael Deckel S11 speed. The machine is suitable for grinding high-precision parts. With the S11, single parts and small series can be ground surprisingly quickly, economically, and flexibly, all with maximum operator comfort. The Deckel S11 speed is in very good condition. Mechanically and electrically tested. Take the opportunity to inspect and test this machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Universal tool grinding machine Michael Deckel S11 in very good condition!! Technical data: >> Year of manufacture: 1992 >> Serial no.: 1651 Clamping range: >> Clamping surface of the tool slide: 500 x 180 mm >> Max. tool diameter between centers: 130 mm >> Max. tool diameter for overhung mounting in the universal indexing head: 620 mm >> Max. tool length between centers: 270 mm >> T-slots on machine base: 12 mm >> T-slots on grinding head, tool slide and accessories: 8 mm Range of movement: >> Working travels Grinding stroke: 190 mm Grinding stroke when helical grinding: 190 mm Cross adjustment of the tool slide: 100 mm Vertical adjustment of the grinding head: 325 mm Longitudinal adjustment of the grinding spindle: 5 mm >> Coarse adjustment travels Tool carrier: 220 mm Grinding head carrier: 800 mm Universal indexing head on tool slide: 330 mm >> Swivel angles Grinding head carrier: 360 degrees Grinding head: 360 degrees Tool carrier: 360 degrees Grinding spindle: Three-phase drive motor: 1.1 kW at 2800 rpm Spindle speeds, stepless: 2000 to 10000 rpm Max. grinding wheel diameter: 125 mm Max. cut-off wheel diameter: 200 mm Tjdpfx Aem E T Aneatof Dimensions: Weight: 520 kg Dimensions (Depth x Width x Height): 800 x 1100 x 1760 mm Space requirement (including operation): 2.5 x 2.3 m Accessories and equipment: >> Opto-electronic measuring device with microscope and digital display >> Radius grinding attachment SK40 >> Handwheel device for tool slide >> Extraction unit >> Machine lamp About the machine: For sale is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, single parts and small batches can be ground remarkably fast, efficiently, and flexibly, all with maximum operating comfort. The Deckel S11 is in very good condition. Mechanically and electrically tested. Take the opportunity to view and test this machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Michael Deckel S5 tool grinding machine in very good condition Technical Data: >> Year of manufacture: 03/1995 >> Maximum grinding wheel diameter: 100 mm >> Spindle speed: 5,600 rpm >> Power consumption: 1.5 kW >> Weight: 450 kg Accessories: >> Swiveling dividing head SK40 >> Various SK40 tool holders About the machine: For sale is a Michael Deckel S5 tool grinding machine. This machine is suitable for grinding high-precision parts. The Deckel S5 is in very good condition. Mechanically and electrically tested. Take the opportunity to inspect and test the machine under power on site. Tsdpfopr U Etsx Aatof

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, en-universal-tool-grinding-machine-michael-deckel-s11-with-acces sories-and-tool-cabinet-in-very-good-condition-technical-data-yea r-of-manufacture-1992-serial-no-1673-clamping-range-mounting-surf ace-of-tool-slide-500-x-180-mm-max-tool-diameter-between-centers- 130-mm-max-tool-diameter-with-overhung-mounting-in-the-universal- dividing-head-620-mm-max-tool-length-between-centers-270-mm-t-slo ts-machine-base-12-mm-t-slots-grinding-head-tool-slide-and-access ories-8-mm-travel-range-working-travel-grinding-stroke-190-mm-gri nding-stroke-for-helix-grinding-190-mm-cross-travel-tool-slide-10 0-mm-vertical-travel-grinding-head-325-mm-longitudinal-travel-gri nding-spindle-5-mm-coarse-adjustment-travel-tool-carrier-220-mm-g rinding-head-carrier-800-mm-universal-dividing-head-on-tool-slide -330-mm-swivel-angles-grinding-head-carrier-360-degrees-grinding- head-360-degrees-tool-carrier-360-degrees-grinding-spindle-three- phase-drive-motor-1-1-kw-at-2800-rpm-spindle-speeds-infinite-2000 -to-10000-rpm-max-grinding-wheel-diameter-125-mm-max-cutting-whee l-diameter-200-mm-dimensions-weight-520-kg-dimensions-depth-x-wid th-x-height-800-x-1100-x-1760-mm-space-requirement-incl-operation -2-5-x-2-3-m-accessories-and-equipment-1-pc-tool-cabinet-with-con tents-see-pictures-about-the-machine-offered-is-a-universal-tool- grinding-machine-of-the-brand-michael-deckel-s11-the-machine-is-s uitable-for-grinding-high-precision-parts-with-the-s11-individual -parts-and-small-batches-are-processed-incredibly-fast-economical ly-and-flexibly-with-top-operating-comfort-the-deckel-s11-is-in-v ery-good-condition-and-comes-with-extensive-accessories-mechanica lly-and-electrically-tested-take-advantage-of-the-opportunity-to- view-and-test-this-machine-under-power-on-site Tedpfx Aajxu E Nqstof

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP3 with 3-axis digital readout RSF Elektronik Z-530!! Technical specifications: >> Year of manufacture: approx. 1975, Machine no. 0681 >> Swivel-tilt table (newly overhauled) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse on 3 axes >> Drive power: 3 kW >> Travel (X/Y/Z): 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK-40 >> Clamping system M16 >> Weight approx. 1300 kg Accessories and features: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Central lubrication About the machine: Tjdexu E I Hepfx Aatef Offered is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most of the bellows are new. The swivel-tilt table is as good as new. An oil change has been performed. Mechanically and electrically tested. The digital readout makes working easier and even more precise. Take the opportunity to inspect and test the Deckel on site under power. The machine is immediately available!!!