Beli Tiga-Rahang Chuck Untuk Bor bekas (40.376)

Kondisi: bekas, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, pl-hu-001 Gsdpew Iqdzjfx Adqeuh

Kondisi: bekas, 3-jaw wedge bar power chuck, presumed RÖHM or SCHUNK Equivalent to Forkardt F315 or SMW Guodpfxsw Dvv Nj Adqoh Diameter: 318 mm Inner diameter: 85 mm Chuck flange: short taper, DIN 55022, size 8 1 set of chuck jaws consisting of base jaws and hard stepped top jaws 2 sets of chuck jaws consisting of base jaws for bolting on top jaws Weight: 100 kg Good condition

Kondisi: baik (bekas), Four-jaw chuck, Four-jaw lathe chuck, 4-jaw chuck - Four-jaw chuck: Chuck size Ø 190 mm - Pass-through: Ø 57 mm - Bolt circle: Ø 170 mm - Change jaws: width 20 mm, not included in delivery, can be supplied at additional cost - Dimensions: Ø 190 x 65 mm - Weight: 8 kg Guedpfjw Dp Rasx Adqoh

Kondisi: bekas, Type F250 . Diameter: 250 mm . Passage approx.: 61 mm Gsdpfx Aowwgt Sodqouh

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 80 kg, diameter luar chuck: 400 mm, lubang spindel: 140 mm, Four-jaw scroll chuck Very good condition, signs of use visible – see photos. Jaws: 4 self-centering jaws → external clamping for larger diameters Suitable for: lathe; machining centre; milling machine Chuck mounting on milling table or machining centre (MC) via clamping flange. Jaw adjustment via square key and scroll plate, centrically adjustable, RÖHM type Z 400 Jaw dimensions: Gedpfsvy Iuksx Adqeuh Width: 34 mm Length: 110 mm Slot B: xx mm Slot D: xx mm Total weight: approx. 90 kg Delivery includes chuck key. Additional jaws available on request Flange for milling table mounting available on request Delivery: Shipping by freight carrier on transport pallet on request.

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: belum diuji, COMPOSITE SANDING LINE CONSISTING OF 3 MACHINES: LOWER UNIT WITH TWO PAD BELTS; Gedow E Eu Ropfx Adqsuh UPPER UNIT WITH TWO PAD BELTS; LATERAL UNIT WITH ONE BELT AND TWO BELT EDGE SANDERS FOR BEAMS UP TO 800x300 mm INCLUDES INFEED AND OUTFEED ROLLER CONVEYORS TOTAL POWER 34 kW

Kondisi: baik (bekas), Lock, tenon, and multi-purpose drilling and milling machine Specification: • Condition: used Gedpfx Ajw Av Enodqsuh • Total power: 6000 W (3 x 2000 W) • Single-phase power supply (220V) • Maximum milling width: 75 cm • Cutter mounting: M12x1 thread • Two vertical-axis drilling heads • One horizontal-axis drilling head • Distance between vertical heads: approx. 16 cm • Overall dimensions: 110 x 70 x 165 cm (W x L x H) Additional information: • Machine is in good technical condition, ready for immediate use • The photos show the actual item for sale • Possibility to start and test the machine on site

Kondisi: bekas, 3-jaw wedge bar power chuck FORKARDT TYPE F+160 No. 1659 181 Equivalent to Forkardt, SMW, or Röhm Diameter: 160 mm Guedjf Axprepfx Adqsh Internal diameter: 45 mm Chuck flange: Short taper DIN 55022 size 6 1 set of chuck jaws consisting of base jaws and hard reversible top jaws 1 set of chuck jaws consisting of base jaws and soft reversible top jaws - Central adjustment Weight: 11 kg Good condition

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, diameter luar chuck: 630 mm, New 4-jaw chuck from Polish manufacturer BISON, diameter 630 mm Guodpswk Ibkefx Adqsh

Kondisi: baik (bekas), Precision four-jaw chuck, chuck, faceplate, 4-jaw chuck, four-jaw chuck -Manufacturer: Klopfer, precision four-jaw chuck Ø 165 mm Gujdpfx Ajwub Tzjdqeh -Bore: Ø 49 mm -Mount: MK4 -Jaws: individually and fully adjustable -Overall dimensions: Ø 165 x 230 mm -Weight: 13.6 kg

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, kedalaman pengeboran: 2.000 mm, panjang pemakanan sumbu X: 3.250 mm, panjang umpan sumbu Y: 1.500 mm, panjang umpan sumbu Z: 500 mm, panjang total: 8.000 mm, lebar total: 6.000 mm, tinggi total: 4.300 mm, berat keseluruhan: 45.000 kg, kecepatan pemakanan sumbu X: 8 m/menit, laju pemakanan gandar Y: 8 m/menit, laju pemakanan sumbu Z: 8 m/menit, kecepatan spindel (maks.): 4.200 rpm, diameter bor: 40 mm, daya motor spindle: 17.000 W, panjang meja: 2.000 mm, lebar meja: 2.500 mm, beban meja: 50.000 kg, panjang langkah makan poros W: 500 mm, Heidenhain 530 CNC control Drilling depth (V): 2,000 mm Longitudinal travel (X): 3,250 mm Vertical travel (Y): 1,500 mm Cross travel (Z) - threading axis: 500 mm Workpiece approach (W): 500 mm Rapid traverse speed (X, Y, V axes): 8,000 mm/min “IMSAUTOROTATION” rotary-sliding table: 2,000 x 2,500 mm Maximum table load (rotating workpiece, clamped on axis): 30,000 kg Maximum load (stationary workpiece): 50,000 kg Drilling head inclination (C): +/-20° ISO 50 spindle taper Drilling and milling spindle motor power: 17 kW Spindle speed: 4,200 rpm Drilling section (solid material), minimum drill bit diameter: (5) 6 mm Drilling section (solid material), maximum drill bit diameter: (50) 40 mm Tool magazine: 20 stations Floor space required (approx.): 6,000 x 8,000 mm Gujdpfx Adewzw Ihsqoh Height: 4,300 mm Total machine weight (approx.): 45,000 kg Complete with: - Optical scales (X, Y) - Drilled plate: 2,200 x 2,500 mm, thickness 70 mm - Gun drills with bushings - High pressure: 80 bar - Full oil-tight enclosure - Chip conveyor USED MACHINE

Kondisi: bekas, Automatic lathe, turning machine with copying attachment UMA type F1 NK 60 Copying lathe for chuck-turned parts Machine no.: 28-0031 Year of manufacture: 1971 Max. turning diameter: 150 mm Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in machine spindle: approx. 42 mm Spindle speeds: 580 - 930 - 1480 - 2380 rpm, 4 steps Main motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Spindle flange for chuck mounting: short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4-speed gearbox - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying device SAUTER type KMCA 61, with hydraulic feed motion - Left side with cross slide with hydraulic feed motion Gjdpfxsib D H Re Adqsuh - Coolant system installed under machine bed - Hydraulic power unit positioned behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement for automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Space requirement for automatic lathe (L x W x H): 2400 x 1900 x 1500 mm Space requirement for hydraulic unit (L x W x H): 1400 x 850 x 1700 mm Weight of automatic lathe: 2400 kg Weight of hydraulic unit: 400 kg Total weight with pallet: 3000 kg Good condition

Kondisi: bekas, 2-jaw chuck, 2-jaw chuck, vise, face plate - Chuck size: Ø 250 mm Gusdpfxed It Ife Adqeh - Short taper: 11 - Recess: Ø 199 mm - Weight: 36.5 kg

Kondisi: bekas, Transistor pulse inverter for three-phase feed drives with analog control, servo amplifier SIEMENS type Simodrive 610 6SC6101-3A-Z Serial No.: A 822M103 Z = A30+A20+A18 Year of manufacture: 1989 The Simodrive 610 transistor pulse inverters are designed to power three-phase servo motors of type 1FT5/1FS5. The dynamic properties of these motors are meant to be utilized to the fullest. Depending on the configuration of the power module, the pulse inverters can be used for a wide range of applications. Guodpfxeh D Syvo Adqjh This flexibility is further enhanced by extension modules for the power section. Connection voltage: 3 AC 50/60 Hz 165 Volt or DC 220 Volt (suitable transformer: 380/165 Volt 5kVA (not included) Output voltage: 3 DC 200 Volt Efficiency: approx. 95 % Number of feed axes: 4 Speed setpoint: ±10 Volt Auxiliary voltage: 24 Volt Relay contact for fault/ready-for-operation notifications Dimensions W x H x D: 339 x 440 x 300 mm Weight: approx. 25 kg The servo amplifier is still operational in a Gildemeister GDM42. Further components from the Gildemeister are available under stock numbers: 60343, 60347, 60348

Kondisi: bekas, Hydraulic power unit, hydraulic pump, hydraulic test pump Gedpfx Adod S Nmieqouh - Manufacturer: Sauter HA 1401 86 38 192 - Hydraulic power unit: for power chucks - Drive: 0.75 kW, 1410 rpm - Flow rate: approx. 11 l/min - Dimensions: 510 x 300 x H750 mm - Weight: 80 kg

Kondisi: bekas, Precision four-jaw chuck, chuck, faceplate, 4-jaw chuck - Manufacturer: Röhm, precision four-jaw chuck Ø 260 mm - Through-hole: Ø 70 mm - Bolt circle: Ø 170 mm - Mount: short taper 8 - Jaws: individually and fully adjustable - Weight: 39 kg Gusdpfohf Ni Eex Adqsh

Kondisi: bekas, Two-jaw chuck, 2-jaw chuck, vise, faceplate - Chuck size: Ø 160 mm Gedpfx Ajb A Rfcsdqeuh - Clamping: centric - Interchangeable jaws: soft - Mounting taper: Ø 105 mm - Bolt circle: Ø 135 mm - Weight: 18 kg

Kondisi: bekas, Zweibackenfutter, 2 Backenfutter, Schraubstock, Planscheibe -Chuck size: Ø 250 mm Gusdodu Uffjpfx Adqjh -Centrically clamping -Weight: 35 kg

Kondisi: bekas, Hydraulic power unit, hydraulic pump, hydraulic test pump -Hydraulic power unit for: power chuck -Hydraulic pump type: B1A8E Gedpsc Skt Esfx Adqeuh -Pump max. pressure: 80 bar -Pump max. flow rate: 12 l/min -1x drive motor: 1.1 kW, 1400 rpm -Hydraulic filter -Hydraulic tank -Dimensions: 500 x 410 x H670 mm -Weight: 100 kg

Kondisi: bekas, Two-jaw chuck, 2-jaw chuck, vise, faceplate Gedpfjb A R Hvex Adqeuh -Clamping: centric -Chuck size: Ø 200 mm -Weight: 19 kg

Kondisi: bekas, Two-jaw chuck, 2-jaw chuck, vice, faceplate - Chuck size: Ø 125 mm Guodpfx Adeb A Rdloqjh - Clamping type: centric - Jaw type: soft reversible jaws - Weight: 6 kg

Jam operasional: 1.015 h, Kondisi: bekas, Hydraulic power unit, hydraulic pump, hydraulic test pump - Hydraulic power unit for: power chuck - Drive motor: Ziehl-Abegg type HYDT.132,28-4 - Motor: 11 kW 1420 rpm Guodpjfcw Twjfx Adqjh - Dimensions: 1300/400/H820 mm - Weight: 270 kg

Kondisi: bekas, Two-jaw chuck, 2-jaw chuck, vise, faceplate Gjdpsb A Rdqsfx Adqjuh - Chuck size: Ø 125 mm - Clamping: centric - Jaw inserts: soft - Mounting taper: Ø 82 mm - Bolt circle: Ø 105 mm - Weight: 14 kg

Kondisi: bekas, Two-jaw chuck, 2-jaw chuck, vise, faceplate - Chuck size: Ø 125 mm - Clamping: centrically - Without reversible jaws: yes Gsdpfx Ajb A Rfmsdqeuh - Weight: 4 kg

Kondisi: bekas, Two-jaw chuck, 2-jaw chuck, vise, faceplate - Chuck size: Ø 250 mm - Clamping type: centric - Changeable jaws: soft - Weight: 22 kg Gusdpfx Ajb A Rd Eodqeh