Beli Udara Meja bekas (8.050)

Tahun pembuatan: 2015, Kondisi: sangat baik (bekas), Clean Air Workbench Heraguard HPH 15 Thermo Scientific Used, Location: Cologne Ihodpfoiv S Agsx Aa Njt Regularly serviced Laboratory liquidation, various microscopes and additional equipment available upon request

Kondisi: bekas, Single-column pneumatic press, hydraulic press PAUL ANTON model PVT 2 Pneumatic benchtop press, embossing press Serial no. 97148 Year of manufacture: approx. 1980 Pressing force: 10 tons Throat depth: 100 mm Ram stroke: approx. 25 mm Ram surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very robust construction - Hydro-pneumatic press with air-to-oil pressure conversion - Pneumatic foot switch - Ram with internal thread M12 - Metal substructure Required space (L x W x H): 850 x 620 x 1560 mm Weight: approx. 200 kg Good condition Ijdpfx Ajtrpiiea Njht

Kondisi: baik (bekas), Meja dengan perangkat penghalus (penghilangan lapisan tepi) dan dua bilah penghancur terintegrasi. Lebar: 3700 mm Kedalaman: 2430 mm Tinggi: 970 mm Berat sekitar 1500 kg Ihsdpfx Aasxnl Sfe Not

Kondisi: bekas, Tahun pembuatan: 1998, Dengan bilah penghancur. Meja baru-baru ini dilapisi kain vilt baru. Panjang: 7250 mm Lebar: 3650 mm Tinggi: 920 mm Ihodpfx Aajwtnz As Nst

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1110013, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 1.600 mm, jarak gerak sumbu Z: 1.500 mm, beban meja: 6.000 kg, diameter spindel: 110 mm, DETAIL TEKNIS Pergerakan Sumbu X: 2.000 mm Pergerakan Sumbu Y: 1.600 mm Pergerakan Sumbu Z: 1.500 mm Ihjdpfex I A D Ujx Aa Not Diameter Spindel Bor: 110 mm Luas Meja Penjepit: 1.250 x 1.600 mm Kapasitas Beban Meja: 6.000 kg DETAIL MESIN Kontrol: Heidenhain TNC 426M Catatan: Peralatan yang terlihat di gambar tidak termasuk dalam lingkup penjualan dan pengiriman.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1000030194, panjang meja: 4.500 mm, lebar meja: 3.000 mm, DETAIL TEKNIS Ihjdpfx Aex Trm Aea Nst Dimensi meja: 3000 x 4500 mm DETAIL MESIN Tegangan suplai: 400 VAC Arus nominal pada beban penuh: 5,04 A Jumlah fasa suplai: 3 Daya: 2,7 kW Frekuensi: 50 Hz

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, jenis bahan bakar: diesel, Tahun pembuatan: 2025, Peralatan: kompresor udara sekrup ganda rotary mesin diesel 190 cfm baru, dipasang di trailer Merek/model: MCWEL MC190S-I Kapasitas aliran udara bebas: 190 cfm Tekanan kerja: 100 psi Ihjdpfx Aasx Izkts Nst Merek/model mesin: Isuzu 4JB1ZY-01 Daya terukur: 50 kW, 2500 rpm

Kondisi: bekas, Tahun pembuatan: 2007, 2007 | Holland-Lift Q 135 El 24 (15m) | Used Scissor Lift Table 📍 Location: Estonia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Ihedpjyailbsfx Aa Njt 💰 Buy Now for EUR 8,900 or Make an Offer. Payment on delivery available for a modest fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 32 inspection points: 26 approved ✅ 6 imperfect ℹ️ 0 critical issues ⚠️ 📌 Inspector’s Comment: The hour meter is defective, and the guard plate near the drive motor is bent. The drive motor is in good condition and all functions work, except for the leveling sensor, which occasionally fails. The customer thawed the remote control before the inspection and charged the batteries. 📄 Want to see the full inspection, additional photos, or a video? Tip: The reference "38110 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stand out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guarantee ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Kondisi: bekas, Round table diameter: 5600 mm Table load capacity: 150 t X-axis travel: / mm Ihjdpfx Aashmzkbo Not Total power requirement: 88 kW Machine weight approx.: 55 t Round table diameter 5600 mm / 150 t loading capacity Equipment: Table with drive motor Condition: decommissioned since 1980 Machine type: C.T.F Core faceplate diameter: 3000 mm Ring faceplate diameter: 5600 mm Core and ring faceplates can be coupled: yes Faceplate can be divided into segments: no Max. workpiece weight: 150,000 kg Table weight approx.: 55,000 kg Dimensions: diameter 5600 x height 1500 mm Turning operation Speed: 0.1 – 20 rpm Speed settings: 4 Drive power: 88 kW Milling operation Speed: 0.0002 – 0.2 rpm Peripheral speed (5000 mm): 3140 mm/min Drive power: 11 kW

Kondisi: baik (bekas), Tahun pembuatan: 2011, WALTER FWR 500/2 Format Saw for Square Timber Ijdpfxsh Dwmle Aa Njht - Manufactured in Poland - Operating manual (DTR), CE marked - Year of manufacture: 2011 TECHNICAL PARAMETERS: - Minimum material length after formatting: 800 mm - Maximum material length after formatting: 1600 mm - Maximum material width: 480 mm - Maximum material thickness: 145 mm - Blade diameter: 500 mm - Infinitely variable feed speed: 0–20 m/min - Main motor power: 2 x 5.2 kW - Feed motor power: 1.5 kW Machine dimensions: 340 x 230 x 180 cm Weight: 2,500 kg

Kondisi: bekas, Tahun pembuatan: 2015, Mesin penggilingan meja tetap Meja kerja: 1945 x 575 mm Maks. jarak keluar spindle di atas meja: 130 mm Panjang pakai spindle: 100 mm Diameter alat maksimum dapat diturunkan: 180 mm Diameter spindle arbor: 30 mm Kecepatan spindle: 3500/7000/10000 rpm Daya motor: 5 kW Berat: sekitar 240 kg Diameter saluran hisap: 2x 120 mm Lokasi penyimpanan: Nattheim Ihjdpeyapvtjfx Aa Not

Kondisi: baru, Tahun pembuatan: 2025, Table length 4000 mm Table width 2000 mm Table height 200 mm Weight 2400 kg Manufacturer: GERD WOLFF Technical Details: • Length 4000 mm • Width 2000 mm • Height 200 mm • Weight 2400 kg • Bore diameter 28 mm • Bore spacing 100 mm • Plate thickness: 25 mm Advantages and Features • 3-day gas nitriding process • Increased corrosion resistance • Anti-adhesion protection against welding spatter • Maximum load capacity • Increased fatigue strength • Enhanced vibration resistance Ihedpfx Aouia I Nea Nst • Fine laser-engraved scale • Reinforced with weld seams and ribs on the underside • Optimal working height of 820-865 mm • 8x height-adjustable support legs • Available with matching accessory set (optional) Our welding tables are manufactured with HT 300 cast quality and undergo a complete nitriding process after mechanical finishing. Additionally, they feature a precise fine scale, engraved using laser technology. To ensure adequate stability, the underside of our welding tables is reinforced with weld seams and ribs (see images). They also undergo a 3-day gas nitriding process, which further increases the corrosion resistance, fatigue strength, and vibration resistance of the tables. All our tables are equipped with adjustable legs. The minimum adjustable range is 620 mm, the maximum is 665 mm. This provides a variable working height from 820 to 865 mm. Other available sizes: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 The images do not represent the original size and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer. 3D Welding Table – 3D Clamping System – 3D Precision Welding Table

Kondisi: bekas, Tahun pembuatan: 2014, jam operasional: 1.197 h, 2014 | Holland-Lift N195-12EL 21.40 m | Used Scissor Lift Table | 1,197 operating hours 📍Location: Estonia 🚛 Delivery available to your location – Use our shipping calculator to estimate transport costs! 💰 Buy now for EUR 22,500 or submit an offer. Payment upon delivery available for a low fee (subject to approval)* 👷‍♂️ Examined by an independent expert 31 inspection points: 31 approved ✅ 0 incomplete ℹ️ 0 issues ⚠️ 📌 Inspector’s comment: Considering the age of the machine, all components and functions are working as expected, and no major issues or anomalies were found during inspection. 📄 Want to view the full inspection, additional photos, or a video? Tip: The reference "38107 Equippo" is commonly used for searching for further details online. Ijdpsyaikwofx Aa Nsht 💡 Why choose this machine and our service? ✔ Comprehensive inspection by professionals ✔ Jobsite delivery available ✔ Money-back guarantee ✔ Secure and flexible payment options 🔄 Looking at other equipment? We offer useful tools and resources for all equipment owners and operators – conveniently accessible on our platform.

Kondisi: bekas, Tahun pembuatan: 2007, Table diameter: 4,520 mm Table load capacity: 35,000 kg Swivel range: 110 degrees Total power requirement: 44 kW Machine weight approx. / t Space requirement approx. / m Type: ROMAT 350 / LVEB-120000N-4m / VVEs-D-18000N-5m-S / QVEB-2m movable beam / CR-200000N / Hydraulic scissor lift table Scope of delivery: Pos. Description 1 Welding power source GLC 603 Quinto SD 2 Wire drum 3 Service door 2.1 4 Robot control cabinet 5 Service door 1.2 6 Scissor lift table (shown in parked position) 7 Cross-travel unit QVEB 8 Robot ROMAT 350 9 Service door 1.1 10 Safety fence 11 Platform 12 Positioner 13 Sliding door 1 14 Linear travel unit LVEB 15 Vertical travel unit VVEs 16 Sliding door 2 The disc ring on the table is a device which is not included in the scope of delivery. ----- Technical Data - Mechanical dimensions (without control and add-ons): approx. 6,440(5770)x4,520(2700)x5,460(3320) LxWxH - Turntable diameter: 4,520 mm - Weight: approx. 25,000 kg (without add-ons) - Speed range: 0.004 - 1.07 rpm - Welding current coupling: 600 A - Maximum table load: 35 tons (as per load chart) Ambient temperature Storage / Transport: 0 to 60°C Operation: +4 to 35°C Interfaces Central transfer point for control, power supply, and ground connection ----- 2.3 Linear Travel Unit, LVEB Type: LVEB-120000N 4m Dimensions W x D x H: 7,700 x 2,440 x 776 mm Weight: 4,355 kg Travel distance: 4,000 mm Load of travel carriage: 120,000 N Drive Gear motor: Precision bevel gear motor Manufacturer: Stöber Type: K402VF0250EK703V Power: 4.21 kW Voltage UKE: 140 V / 1,000 rpm Current rated IN: 8.32 A Holding current I0: 9.04 A Motor speed: 3,000 rpm Gear ratio: i = 25.28 ----- 2.4 Vertical Travel Unit, VVEs Type VVEs-5m Dimensions W x D x H: 2,000 x 1,960 x 7,150 mm Weight: 9,500 kg Travel distance: 5,000 mm Max. moved mass: 18,000 N Drive Gear motor: Bevel gear motor with brake Manufacturer: Stöber Type: K713VF0790MQ30ED704B Power: 4.8 kW Motor speed: 2,000 rpm Gear ratio: i = 78.83 (20181/256) ----- 2.5 Cross Travel Unit, QVEB Type QVEB-2m Dimensions W x D x H: 1,270 x 4,100 x 756 mm Weight: 1,950 kg Travel distance: 2,000 mm Load of beam: 10,000 N Max. moved mass: 18,000 N Drive Gear motor: Precision parallel-shaft gear motor Manufacturer: Stöber Type: FS202VQ0145ED402U Power: 1.43 kW Voltage UKE: 140 V / 1,000 rpm Rated current IN: 2.86 A Holding current I0: 3.1 A Motor speed: 3,000 rpm Gear ratio: i = 14.65 (3180/217) ----- 2.6 Rotary Indexing Table Type CR-200kN Manufacturer: Cloos Dimensions W x D x H: 1,820 x 2,120 x 541 mm Weight: 2,850 kg Drive Gear motor: Bevel gear motor Manufacturer: Stöber Type: K814VG1540EK803U Power: 6.7 kW Motor speed: 3,000 rpm Gear ratio: i = 154.322 ----- 2.7 Robot ROMAT 350 Type ROMAT 350 Dimensions (W x D x H) in reference position: 1,900 x 600 x 1,500 mm Iodpfx Aasrmulvo Nsht Weight: 205 kg...

Kondisi: baru, Tahun pembuatan: 2025, Table length 3000 mm Table width 2000 mm Table height 200 mm Weight 1700 kg Manufacturer: GERD WOLFF Technical Details: • Length: 2000 mm • Width: 3000 mm • Height: 200 mm • Weight: 1700 kg • Hole diameter: 28 mm • Hole spacing: 100 mm • Plate thickness: 25 mm Advantages and Features • 3-day gas nitriding process • Increased corrosion resistance • Anti-adhesion protection against welding spatter • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine laser-engraved scale • Reinforced with welds and ribs on the underside • Optimum working height: 820–865 mm • 8x height-adjustable support legs • Optional matching accessory set available Ihodpfeuia Ntjx Aa Not Our welding tables are manufactured using cast quality grade HT 300 and are nitrided as a whole after machining. Additionally, these tables feature a precise fine scale engraved using laser technology. To ensure adequate stability, our welding tables are reinforced on the underside with welds and ribs (see images). Furthermore, they undergo a 3-day gas nitriding process, which increases, among other things, the corrosion resistance, as well as the fatigue and vibration resistance of the tables. All our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm, the maximum is 665 mm, which allows for a variable working height from 820 to 865 mm. Other available sizes: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Images do not correspond to the original size and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer. 3D welding table – 3D clamping systems – 3D precision welding tables

Kondisi: bekas, Tahun pembuatan: 2019, jam operasional: 4.240 h, 2019 | Isoli PNT220NLX mounted on Nissan NT400 | Used truck-mounted aerial work platform | 4,240 operating hours | 53,375 km Iodpfx Aaex Twahe Njht 📍 Location: Latvia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 34,000 or Make an Offer. Payment upon delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 62 inspection points: 57 approved ✅ 3 minor issues ℹ️ 2 faults ⚠️ 📌 Inspector's Comments: Vehicle defects: 1. Chassis and bodywork are rusted. 2. Headlight not working, rear indicator not functioning. 3. Check engine light was on but has been reset, probably an issue with the AdBlue system (fault temporarily cleared). 4. Hydraulic tank is deformed. 5. Hydraulic control units are unmarked. 6. Seat is torn. 7. Cabin is dirty. 8. Body panels on the driver’s side are of mismatched colors. 9. Warning triangle and first-aid kit are missing. 10. Entry step heavily worn and rusted. 11. Required technical lifting equipment and vehicle inspections are valid. 12. Technical maintenance and operator’s manual is included. 13. No apparent major defects observed apart from those listed. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference “39451 Equippo” is commonly used when searching for more information online. 💡 Why choose this machine and our service: ✔ Comprehensive professional inspection ✔ Jobsite delivery available ✔ Money-back guarantee ✔ Secure and flexible payment options 🔄 Considering other equipment? We offer useful tools and resources for all equipment owners and operators – conveniently available on our platform.

Kondisi: baru, Tahun pembuatan: 2025, Diameter 28 mm Length 75 mm Clamping range 70-75 mm The price is quoted excluding statutory VAT. Also available as D28 x 50 mm (clamping range 45-50 mm). The clamping range is between 70-75 mm. Type: Ball locking pin 75 mm Diameter: 28 ± 0.02 mm Material: 45# steel Hardness: HRC28-32 Surface roughness: Ra 0.8 µm The ball locking pins from GERD WOLFF represent specialized fastening elements designed for integration into various welding table systems and fixtures. Their main function is the efficient and precise positioning and clamping of workpieces. These pins are compatible with welding tables of all brands featuring a bore diameter of 28 mm. The unique ball design allows for flexible alignment of workpieces at different angles and positions. Ihodouia Ngepfx Aa Not Thanks to their high-quality finish and robust construction, GERD WOLFF's ball locking pins provide reliable holding force throughout the entire welding process. These pins ensure easy handling, rapid fixation, and release of workpieces, with no additional tools required. GERD WOLFF stands for quality and precision in welding technology, and their ball locking pins are engineered to meet the demanding requirements of welding applications. Ball locking pin D28, clamping pin 28 mm, ball clamping mechanism 75 mm, precision pin D28, clamping tool 75 mm, industrial clamping technology D28, clamping fixtures 75 mm, ball clamping technology D28, assembly pin 28 mm, clamping systems 75 mm, bolt clamp 28 mm, tool clamping pin 75 mm, assembly technology D28, ball clamping tools 28 mm x 75 mm Quick release locking pins, quick lock pins, quick releases, quick installation pin, metal horizontal quick release, working pin, quick release locking pin, quick latch pin, locking quick release pins

Kondisi: baru, Tahun pembuatan: 2025, Diameter 28 mm Length 50 mm Clamping range 45-50 mm Isdew Td Auspfx Aa Neht The price is exclusive of statutory VAT. Also available as D28 x 75 mm (clamping range 70-75 mm). The clamping range is between 45-50 mm. Type: Ball Lock Pin 50 mm Diameter: 28 ± 0.02 mm Material: 45# Steel Hardness: HRC28-32 Surface roughness: Ra 0.8 µm The ball lock pins from GERD WOLFF represent specialized fastening elements designed for integration into various welding table systems and fixtures. Their primary function is the efficient and precise positioning and securing of workpieces. These pins are compatible with welding tables of all brands that have a 28 mm bore hole. The unique ball design allows flexible alignment of workpieces at different angles and positions. Thanks to their high-quality manufacturing and robust construction, the ball lock pins from GERD WOLFF provide reliable holding force throughout the entire welding process. These pins ensure easy handling, rapid clamping, and quick release of workpieces without the need for additional tools. GERD WOLFF stands for quality and precision in welding technology, and the ball lock pins are engineered to meet the demanding requirements of welding applications. Keywords: Ball lock pin D28, clamping pin 28 mm, ball clamping mechanism 75 mm, precision pin D28, clamping tool 75 mm, industrial clamping technology D28, clamping fixtures 75 mm, ball clamping technology D28, assembly pin 28 mm, clamping systems 75 mm, pin clamps 28 mm, tool clamping pin 75 mm, assembly technology D28, ball clamping tools 28 mm x 75 mm Quick release locking pins, quick lock pins, quick releases, quick installation pin, metal horizontal quick release, working pin, quick release locking pin, quick latch pin, locking quick release pins

Kondisi: bekas, Tahun pembuatan: 2016, jam operasional: 4.116 h, 2016 | Isoli PT200 on Nissan NT400 | Used truck-mounted aerial platform | 4116 operating hours | 55182 km 📍Location: Lithuania 🚛 Delivery to your destination available – Use our shipping calculator for an instant transport quote! 💰 Buy now for EUR 37,100 or submit your offer. Payment upon delivery available for a low fee (subject to approval)* Iodpfx Aasx Twabs Njht 👷‍♂️ Inspected by an independent expert 58 inspection points: 57 approved ✅ 1 with minor issue ℹ️ 0 urgent repairs ⚠️ 📌 Inspector’s note: Two of the sensors (shown in the photo) needed to be replaced. 📄 Want the full inspection report, additional photos, or a video? Tip: The reference “39378 Equippo” is often used for further details online. 💡 Why choose this machine and our service? ✔ Thorough professional inspection ✔ Delivery to your location possible ✔ Money-back guarantee ✔ Secure, flexible payment options 🔄 Exploring other machinery? We offer useful tools and resources for equipment owners and operators – all conveniently available on our platform.

Kondisi: baru, Tahun pembuatan: 2025, The FIX KIT 40: The Ultimate Accessory Set for Welding Tables Quantity: 40-piece kit Weight: 47 kg Condition: New Part No.: FIX40 Weight: 47 KG Shipping: Pallet shipping (not included in price) CONTENTS 2 pcs / Stop and Clamping Angle 175 x 50 x 175 mm 2 pcs / Stop and Clamping Angle 275 x 50 x 175 mm 4 pcs / Stop 100 x 50 x 25 mm 4 pcs / Adjustable Stop 150 x 50 x 25 mm 4 pcs / Universal Large Stop 225 x 50 x 25 mm Ihedpjw T Uzhsfx Aa Not 2 pcs / Stop and Clamping Angle 75 x 50 x 75 mm 2 pcs / Vee Block D58 x 90° 58 x 50 (H) - 90° 4 pcs / 180° Clamp 300 x 300 mm 2 pcs / 45° Clamp 300 x 300 mm 1 pc / Wire Brush 1 pc / Grounding Device 12 pcs / Quick Release Clamping Bolt 28 x 75 mm (Clamping range between 70–75 mm. Also available individually and in 50 mm versions) The FIX KIT 40: The ultimate accessory kit for welding tables Specifically designed for welding tables, the FIX KIT 40 offers a comprehensive 40-piece accessory set, distinguished by its precise 28 mm bore diameter. This ensures seamless compatibility and maximum flexibility in your workshop. The robust and durable components are precisely matched to the demands of welding tables. Including quick-release clamping bolts, clamps, and other essential modules, the FIX KIT 40 enables precise and efficient workpiece fixturing. This accessory kit is the ideal solution for customizing your work environment. The carefully selected parts allow you to create fixtures and clamps with maximum precision, significantly streamlining your workflow. In a world where precision and adaptability are critical, the FIX KIT 40 sets new standards. It is more than just an accessory set; it is an indispensable tool to make your work processes more effective and productive.

Kondisi: bekas, Tahun pembuatan: 2001, jam operasional: 5.026 h, en-001 Iodpfx Ajx Ti Ttea Nsht

Kondisi: baru, Tahun pembuatan: 2025, Table length: 3000 mm Table width: 1500 mm Table height: 200 mm Weight: 1500 kg Manufacturer: GERD WOLLF Technical Details: • Length: 3000 mm • Width: 1500 mm • Height: 200 mm • Weight: 1500 kg • Hole diameter: 28 mm • Hole spacing: 100 mm • Plate thickness: 25 mm Advantages and Features Iedpfouia Nmox Aa Njht • 3-day gas nitriding process • Increased corrosion resistance • Anti-adhesion protection against weld spatter • Maximum load capacity • Increased fatigue strength • Increased vibration resistance • Precision fine scaling • Reinforcement through weld seams and ribs on the underside • Optimum working height of 820–865 mm • 8 height-adjustable support legs • Compatible accessory set available (optional) Our welding tables are manufactured using HT 300 cast quality and are nitrided in one piece after mechanical processing. In addition, they feature precision fine scaling, which is laser-engraved for accuracy. To guarantee optimal stability, our welding tables are reinforced on the underside with welded seams and ribs (see images). Furthermore, the tables undergo a 3-day gas nitriding process, which significantly enhances corrosion resistance as well as the fatigue and vibration strength of the tables. All our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm, maximum 665 mm. As a result, a variable working height of 820 to 865 mm is possible. Further available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 The images shown do not represent the original size and are for illustrative purposes only. Our welding tables are produced for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer. 3D welding table – 3D clamping systems – 3D precision welding table

Kondisi: baru, Tahun pembuatan: 2025, Table length: 2400 mm Table width: 1200 mm Table height: 200 mm Material thickness: 25 mm Weight: 920 kg Manufacturer: GERD WOLFF Technical details: • Length: 2400 mm Iedjvvx Hpspfx Aa Neht • Width: 1200 mm • Height: 200 mm • Weight: 920 kg • Bore diameter: 28 mm • Bore spacing: 100 mm • Plate thickness: 25 mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Anti-adhesion protection against welding spatter • Maximum load capacity • Increased fatigue strength • Enhanced vibration resistance • Fine scaling • Reinforcement through weld seams and ribs on the underside • Optimal working height of 820-865 mm • 6 height-adjustable support legs • Compatible accessory set available (optional) Our welding tables are manufactured using HT 300 cast iron quality and are nitrided as a single piece following mechanical processing. Additionally, these tables feature precise fine scaling, which is engraved using laser technology. To ensure optimal stability, our welding tables are reinforced with weld seams and ribs on the underside. (See images) The tables also undergo a 3-day gas nitriding process, which further enhances corrosion resistance as well as the tables’ fatigue and vibration strength. All our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm, maximum is 665 mm. This provides a variable working height of 820 to 865 mm. Further available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 The images do not correspond to the original size and are for illustrative purposes only. Our welding tables are manufactured by a renowned producer for our distribution brand "GERD WOLLF Maschinenfabrik". 3D welding table – 3D clamping fixtures – 3D precision welding table

Kondisi: baru, Tahun pembuatan: 2025, en-GB Ihsdpfjuia Naex Aa Njt

Kondisi: baru, Tahun pembuatan: 2024, Table length: 1000 mm Table width: 1000 mm Iodpfjuia N Tsx Aa Neht Table height: 200 mm Weight: 300 kg Our welding tables are manufactured with HT 300 cast quality. All welding tables are also available in a nitrided version. To ensure good stability, our welding tables are reinforced with ribs on the underside. • Plate thickness: 25 mm All our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm, the maximum is 665 mm. This allows for a working height of 820 - 865 mm. Hole diameter: 28 mm You can find further details regarding the manufacturing and properties of our tables in our catalogue. The accessories shown are not included in the product. 3D welding table – 3D clamping fixtures – 3D precision welding table