Beli Weiler 280 bekas (180)

Kondisi: bekas, Tahun pembuatan: 2008, Turning diameter: 720 mm Turning length: 3000 mm Centre height: 360 mm Spindle bore: 106 mm Speed range: 1 - 1800 rpm Tailstock quill taper: MT 6 Max. workpiece weight: 3,800 kg Total power requirement: 36 kW Machine weight approx.: 6,100 kg Bedpfxsw A Sqms Aarslr Space requirement approx.: 4,800 x 2,450 x 2,000 mm CNC lathe - cycle-controlled Equipment: - Chip conveyor - Coolant system - 3-jaw chuck Ø 630 mm - MULTI-FIX quick-change toolpost - Rotating centre - Machine lamp

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Weiler DZ 65 / H4 Tersedia mulai awal Februari 2026 Sumbu-Y Kontrol: Siemens 840 D Diameter pembubutan: 240 mm Panjang pembubutan: 500 mm Diameter batang: 66 mm 16 alat pengerak – Keunggulan khusus Konveyor serpihan Spindle sekunder Antarmuka untuk loader batang Perangkat penarik internal mesin untuk batang 1m Tangki pendingin diperbesar Hainbuch 65 Achsfix Mini Chuck tiga rahang Bushing reduksi untuk spindle Bedpfx Aexywbiearslr Sumbu-Y: Ø1 – Ø350

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 83 mm, panjang pembubutan: 1.000 mm, diameter pembubutan: 570 mm, diameter pembubutan di atas carriage atas: 340 mm, diameter quill: 80 mm, jarak gerak quill: 200 mm, berat keseluruhan: 3.200 kg, diameter luar chuck: 250 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, The machine is in very good condition. Bljdpowxw S Ijfx Aarer Available immediately! It can be tested under power.

Kondisi: baik (bekas), WEILER DA 260x1000 Mesin Bubut Lead & Feed Screw - Tampilan digital 3-sumbu "BARU" - Tinggi center 260 mm - Diameter pembubutan di atas bed 535 mm - Diameter pembubutan di atas carriage 345 mm - Jarak antar center 1000 mm - Lubang spindle 71 mm - Rentang kecepatan spindle 33 - 1500 rpm - Otomatis feed membujur/muka - Pemotongan ulir: metrik / imperial / diametral, dll. - Tailstock MK 4 - Daya penggerak 7,5 kW - Nut spindle "BARU" - Dudukan dasar Multifix dengan insert - Cekam 3 rahang 350 mm - 2x Emergency Stop - Pelindung cekam elektrik "BARU" - Dinding belakang penahan serpih - Sistem pendingin - Cekam bor / titik putar - Dokumentasi Dimensi: Bljdpfx Asxyugcjaror PxLxT: 2,7 x 1,5 x 1,7 meter / Berat: 1700 kg Kesalahan/ketidakakuratan penulisan dapat terjadi

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2013, jam operasional: 2.100 h, diameter putar di atas sled silang: 200 mm, lubang spindel: 66 mm, diameter pembubutan di atas alas geser: 435 mm, tinggi pusat: 217 mm, panjang pembubutan: 1.000 mm, panjang total: 3.061 mm, kecepatan spindel (maks.): 3.500 rpm, kecepatan spindel (min.): 1 rpm, lebar tempat tidur: 202 mm, For sale: WEILER E40 precision lathe – only 2,100 hours on the clock, machine condition like new. Features a 435 mm swing over bed, 200 mm swing over cross slide, 66 mm spindle bore, and 1,000 mm turning length. Ideal for workshops requiring accuracy and durability. Contact us for price and further details! Bsdpfx Ajv A Irzearslr

Kondisi: bekas, Diameter pembubutan di atas tempat tidur 370 mm Blodpfxoxfwckj Aaror Diameter pembubutan di atas suport 200 mm Panjang pembubutan 1000 mm Ketinggian center 185 mm Lubang spindle 56 mm Kepala lepas tipe MK 4 Putaran spindle 50 - 2000 rpm Daya penggerak 4,0 kW Berat mesin sekitar 1,4 t Kebutuhan ruang sekitar 2,3 x 1,1 x 1,3 m Mesin bubut dengan lead screw dan feed shaft Chuck tiga rahang 200 mm Pemegang pahat Multifix ukuran B 3 pcs kaset Multifix Perangkat pemutus darurat

Kondisi: sangat baik (bekas), machine-description-001 Bjdpfxswtqnro Aarolr

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2013, Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik cycle control WEILER 840 D /SL 1 Year of manufacture: 2013 Spindle bore: 66 mm Distance between centers: 1000 mm Swing over bed: 435 mm Swing over cross slide: 200 mm Center height: 210 mm Speed range: 1 – 3500 rpm, stepless Supplied with the following accessories: - Sliding guard with internal lighting - 8-position SAUTER turret - 3-jaw chuck RÖHM Ø 200 mm - Tailstock with extendable quill - Coolant system - Coolant spray gun Bedpfswfm Tbsx Aarjlr - Chip collection tray - 5 height-adjustable machine mounts - Operating manual

Kondisi: baik (bekas), Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 410 mm, lubang spindel: 54 mm, kecepatan rotasi (maks.): 3.000 rpm, tinggi total: 1.800 mm, panjang total: 2.200 mm, lebar total: 1.500 mm, berat benda kerja (maks.): 700 kg, berat keseluruhan: 2.100 kg, For sale: Weiler lathe, model E35. The machine is in good condition and fully operational. Technical data: Year of manufacture: 1994 Control: Siemens Sinumerik 805 Blsdpfx Aajxu Ehgsrer Centre height: 200 mm Centre distance: 950 mm Max. turning diameter over bed: 410 mm Max. turning diameter over cross slide: 200 mm Max. spindle speed: 3,000 rpm Tool changer: Multifix quick-change system Spindle bore: 54 mm Max. workpiece weight: 700 kg Dimensions (approx.): 2,200 x 1,500 x 1,800 mm Weight (approx.): 2,100 kg Transport and loading can be organised Europe-wide for an additional charge upon request. Prices are excluding VAT. Inspection possible by appointment. Contact us – our team will be happy to assist you. Trade-in or exchange welcome! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your workshop? Or are you planning to sell your equipment? For further information or contact options, please visit our website.

Kondisi: baik (bekas), WEILER Praktikant 800 R / Mesin Bubut Poros Utama & Tarik dari lembaga pendidikan Blodpoxyqxnsfx Aarsr - Diameter pembubutan di atas tempat tidur: 300 mm - Diameter pembubutan di atas support: 150 mm - Panjang pembubutan: 800 mm - Lubang spindle: 42 mm - Rentang kecepatan putar: 40–2000 rpm - Feed otomatis longitudinal & melintang - Ulir / Metrik / Imperial - Tailstock MK 3 - Daya motor: 3 KW - Multifix dengan sisipan - Sistem penjepit cepat collet termasuk collet - Pelindung chuck - Dinding penahan serpihan dengan lampu kerja - Tombol darurat - Roda gigi ganti - Center putar + chuck bor - Lemari alat - Dokumentasi Dimensi: P x L x T: 1,8 x 0,8 x 1,6 meter / Berat: 750 kg Kesalahan atau kekeliruan data dapat terjadi.

Kondisi: sangat baik (bekas), Swing diameter over bed 330 mm Centre distance 750 mm Spindle speeds 1–4,500 rpm Control: WEILER C3 Bodoud Naqspfx Aarslr Various accessories MARCELS MACHINEN CH

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 piece 160 mm 3-jaw chuck with 1 set of jaws >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet attachment with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the machine: Bjdpfx Aasu Aftgorjlr For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surfaces to be produced as if ground. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Kondisi: baik (bekas), Mesin bubut poros utama/ulir Weiler Matador (Nomor mesin: M2271) Bledpfeudh R Uox Aaror Panjang pembubutan: 470 mm Jarak antara senter: 500 mm Ketinggian senter: 150 mm Diameter pembubutan di atas dudukan pelana: 155 mm Diameter putar di atas ranjang: 295 mm Multifix A dengan kaset Lubang spindle: 36 mm 36 kecepatan spindle: 15-3550 rpm Tampilan digital Heidenhain (1 sumbu) Pelindung chuck tidak terkunci Chuck 3-jaw

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1995, CNC TURNING MACHINE WEILER 'E 35' Equipped with 2-axis Siemens Sinumerik 805 Year of manufacture: 1995 Spindle bore: 54 mm Centre distance: 950 mm Swing over bed: 410 mm Speed range: 4 – 3000 rpm Including the following accessories: PARAT tool holder with 8 inserts Chuck guard 3-jaw chuck Ø 200 mm 4-jaw chuck Ø 200 mm Fixed steady rest 12 – 150 mm Chip collection tray Chip splash guard with lighting Bljdpfxouzyw Do Aarsr Coolant system 4 height-adjustable machine feet Operating manual

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 Bljdpfx Aovtp Edsarsr >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear stages >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT 2 >> Feeds: 0.03 to 0.15 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, height: 1.3 m, depth: 0.65 m Accessories and Equipment: >> 1 piece 3-jaw chuck 125 mm with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly, and surface finishes similar to grinding can be achieved. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2013, Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik cycle control WEILER 840 D /SL 1 Year of manufacture: 2013 Spindle bore: 66 mm Centre distance: 1000 mm Swing over bed: 435 mm Swing over cross slide: 200 mm Centre height: 210 mm Stepless speed range: 1 – 3500 rpm Including the following accessories: Sliding guard with internal lighting Multifix tool holder with 8 inserts 8-position SAUTER turret with AGW and driven tools C axis via main drive 3-jaw chuck Schunk ROTA plus Ø 250 mm 5 sets of soft top jaws, 1 set of hard top jaws Tailstock with extendable quill Blodpfx Aasvkd Inorer Reinforced coolant system 5.5 bar Coolant spray gun Chip collection tray 5 height-adjustable machine feet Operating manual

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus GS Lead and Feed Screw Lathe in Excellent Original Condition!!! Technical Data: >> Year of manufacture: approx. 1992, Machine No. 4549 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speeds: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short-taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> New collet attachment, new collets from 3 to 25 mm >> 1 three-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders About the Machine: This offer is for a Weiler Primus GS lead and feed screw lathe in excellent original condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The bed ways are in top condition. Even at high speeds, the Weiler runs very quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see its condition for yourself. Blodpfx Aaswkh Abjrer

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus GS Lead and Feed Screw Lathe with 3-Axis Digital Readout Easson-ES8 From Training Workshop – Excellent Condition! Technical Data: • Year of Manufacture: approx. 1990 Machine No. 3768 • Centre Height: 120 mm • Centre Distance: 430 mm • Spindle Speeds: 60 – 3000 rpm in 18 gear steps • Spindle Bore: 23 mm • Short Taper Spindle Nose DIN 4 • Tailstock Taper: MK 2 • Feeds: from 0.03 to 0.15 mm/rev • Thread Types: Metric, Imperial, Module, and Diametral Pitch • Metric Thread Pitches: from 0.25 to 2.5 mm Blsdpfsvkfhpjx Aarsr • Weight: approx. 360 kg • Dimensions (LxHxD): 1.2 m x 1.3 m x 0.65 m Equipment and Features: • 3-Axis Digital Readout by Easson ES8 • Collet chuck system 1–20 mm, 1 mm increments, incl. draw tube • 1 Three-jaw chuck with 2 sets of jaws • 1 Four-jaw chuck with 2 sets of jaws • Multifix size A with 3 tool holders • Bed stop • Steady rest About the Machine: For sale is a Weiler Primus lead and feed screw lathe, built circa 1990, in outstanding condition. The machine is, of course, fully functional. All slides move smoothly and evenly, and the bedways are in very good condition. Even at high speeds, the Weiler runs quietly. The machine comes from a major company’s training workshop. This newer generation of Weiler lathes is very user-friendly and allows for ground-like surface finishes. Take the opportunity to inspect the machine on site under power and convince yourself of its condition.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose according to DIN 4 >> Tailstock Morse Taper 2 (MT2) >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric pitch range: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 new 3-jaw chuck, 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm, in 1 mm increments (new) About the Machine: Bledpfxjvivmye Aarer Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides run smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is highly user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor B, lead and feed screw lathe with 3-axis digital readout from K&C, NEW, CE compliant!! Technical data: - Machine no.: 2442, year of manufacture: 1997 - Centre height: 165 mm - Centre distance: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock: Morse taper 3 - Feeds: from 0.015 to 0.46 mm/rev - Thread cutting: metric, inch, module, and diametral pitch - Metric pitch range: 0.18 to 28 mm - Weight: approx. 1100 kg - Spindle brake, switchable - Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and features: - 3-axis digital readout by K&C, new, 12 months manufacturer's warranty, operating manual included Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switch, etc. - 1 pc. new 3-jaw chuck, 160 mm, incl. 2 sets of jaws - 1 pc. 4-jaw chuck, 200 mm, incl. 1 set of jaws - Collet chuck unit, NEW, and collets NEW, range 3 to 25 mm in 1 mm increments - Multifix toolpost size B, with 2 steel holders - Bed stop Bljdpfsxcuazjx Aaror - Electronic spindle protection - Rear splash guard - Machine feet For safety: electronic spindle protection, 2 emergency stop buttons, change gear cover with limit switch, spindle brake About this machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been carried out. This newer generation of Weiler lathes is highly user-friendly. Take the opportunity to view and test the machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, Weiler Primus VC Precision Centre Lathe, 3-Axis Digital Readout K&C NEW with VC Drive, stepless speed control, and CE conformity – very good condition Bedjw Idlljpfx Aarjlr Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4,000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper MK 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be engaged >> Machine dimensions: approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis digital readout K&C NEW >> Collet system with collets from 3 to 26 mm, 1 mm increments, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> Electric chip guard >> Machine feet >> Splash guard About the machine: Offered is a Weiler Primus VC lead and feed screw lathe, year of manufacture 2003, in very good original condition. This is a very well-maintained lathe with VC drive and stepless spindle speed control. The digital readout and scales by K&C are brand new. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like surface finishes. The K&C digital readout makes operation even easier and more precise. You are welcome to inspect and test the machine under power on site to verify its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with NEW K&C 3-Axis Digital Readout Technical Data: >> Year of manufacture: 1987 Machine no.: 87 835 >> Centre height: 165 mm Bedpfx Ajwrmuxjarjlr >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock quill: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch threads >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> NEW K&C 3-Axis digital readout, 12 months' manufacturer's warranty with user manual Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, 200 tool programs, taper calculation, radius/diameter, quick-zero, counting direction toggle >> 1 piece 160 mm 3-jaw chuck, NEW, 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck, 1 set of jaws >> Collet chuck and collets, NEW, from 3 to 26 mm in 1 mm increments >> Multifix B size toolpost with 2 holders >> Bed stop >> Electronic spindle guard >> Rear splashguard >> Coolant system >> Machine levelling feet About the Machine: For sale is a used Weiler Condor 81 in very good condition. The machine is, of course, fully operational and has been completely disassembled and newly painted. A very robust and high-performance machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has undergone complete electrical and mechanical inspection. A full oil change has been carried out. This newer generation of Weiler lathes is highly user-friendly. Take advantage of the opportunity to inspect and test the machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor B, lead and feed shaft lathe with brand-new K&C 3-axis digital readout, direct from a training workshop! Technical Data: >> Machine No.: 91-1814, Year of manufacture: 1991 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027, size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake, selectable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Accessories and Equipment: >> 3-axis digital readout by K&C – NEW, 12 months manufacturer warranty with operating manual Bledpfow Nw Dqex Aaror Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tool programming (200 tools), taper calculation, radius/diameter, quick-zeroing, count direction switch, etc. >> 1 piece 3-jaw chuck NEW, 160 mm with 2 sets of jaws >> 1 piece 4-jaw chuck, 160 mm, with 1 set of jaws >> Collet chuck NEW, and new collets from 2 to 24 mm in 1 mm increments >> Multifix toolpost size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear guard >> Fixed steady >> Machine feet Safety features: electronic spindle guard, 2 emergency stops, change gear box with limit switch, spindle brake About the Machine: Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. This is a very robust and powerful machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has undergone a thorough electrical and mechanical inspection by us, including a complete oil change. This newer generation of Weiler lathes is particularly user-friendly. Take advantage of the opportunity to view and test this machine under power at our facility.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor 81, Lead and Feed Screw Lathe with NEW K&C 3-Axis Digital Readout Technical Data: >> Year of manufacture: 1983 Machine no.: 83-067 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose according to DIN 55027 size 5 with bayonet locking >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev Blodswb Supopfx Aarjr >> Thread cutting capability: Metric, Imperial, Module, and Diametral Pitch threads >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> New K&C 3-axis digital readout, 12 months manufacturer's warranty, including operation manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter switching, quick zeroing, counting direction switching >> 1 piece NEW 160 mm 3-jaw chuck, 2 sets of jaws >> New collet chuck and new collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 3 tool holders >> Electronic spindle guard >> Rear splash guard >> Coolant system >> Machine leveling feet About the machine: A used Weiler Condor 81 is offered here in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A full oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power at our premises.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor 81 - Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Data: >> Year of manufacture: 1988 Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 Size 5 with bayonet lock >> Tailstock taper MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Dimensions (LxHxD): 1.83 m x 1.29 m x 0.88 m Bledpfx Aoxu Hlajaror Accessories and Features: >> 3-axis Heidenhain digital readout >> 1 pc new 3-jaw chuck with 2 sets of jaws >> Collet chuck system, collets from 3 to 30 mm, 40 collets (partially duplicate sizes) >> Multifix size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck >> Rotating centre Safety Features: >> Lead and feed screw cover >> 2 emergency stop buttons >> Spindle brake About the Machine: Offered here is a used Weiler Condor 81 lathe, year 1988, in very good condition. The machine is fully functional, of course. For safety, the lead and feed screws are equipped with protective covers. A very robust and powerful machine. The 3-axis Heidenhain digital readout makes work even easier and more precise. The machine has been electrically and mechanically checked by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine under power at our premises.