Beli Weiler Lz bekas (176)

Kondisi: baik (bekas), Tahun pembuatan: 1972, Swing diameter over bed 330 mm Swing diameter over support 200 mm Turning length 800 mm Total power requirement 3 kW Machine weight approx. 800 kg Ppsdpfjwwl Izox Al Ier Space requirement approx. 1.9x0.7x1.2 m Spindle speed range 24–2800 rpm Accessories: *2 chucks with spare jaws *5 Multifix toolholders *Change gear set *Various centres and accessories

Kondisi: baik (bekas), Tinggi pusat: 125 mm Jarak pusat: 800 mm Diameter pembubutan terbesar di atas ranjang/rel: 280/245 mm Kepala spindle, ulir sesuai DIN 800 Lubang spindle: 24 mm Kecepatan spindle dapat diatur tanpa langkah: 26 - 2000 rpm 36 langkah pemakan memanjang: 0,019 - 0,528 mm Ulir metrik: 0,25 - 6 mm 44 ulir inci: 4 - 112 TPI Koneksi listrik: 380 V, 0,7/1,4 kW Kebutuhan tempat: Psdpfx Ajyu R H Nol Iepr Berat sekitar: 500 kg

Kondisi: baik (bekas), Jarak antara ujung: 450 mm Tinggi ujung: 120 mm Lubang spindle: 23 mm Kecepatan: 40 – 3000 rpm Penggerak variabel kontinu dengan 3 tingkat transmisi & tampilan kecepatan digital Tailstock: MT 2 Daya penggerak: 1,5 kW Berat: 350 kg Ppedpfx Aow I A Uxel Ier Dimensi: 1200 x 650 x 1330 mm Pewarnaan: Reseda hijau RAL 6011 Tampilan digital: Opsional dengan biaya tambahan Aksesori: Aksesori lainnya tersedia sesuai permintaan

Kondisi: bekas, nomor mesin/kendaraan: 11756, Used lead and feed screw lathe WEILER LZ 280 Center height: 125 mm Distance between centers: 800 mm Spindle speeds: approx. 26-2000 rpm Includes: - 1 x 3-jaw chuck Ø 125 mm with inside and outside jaws, brand new - Multifix size A with 2 toolholders - Emergency stop/switch unit - Rear chip guard plate - Complete set of change gears - Catch plate - Tray - Machine lamp - New socket outlet - 15 collets from Ø 3.5 - 18.5 mm, collet clamping tube - Fixed center and MT2 sleeve for clamping tube Pedpfjvd Dbnox Al Iopr - Bed stop - Chuck guard - Various turning tools and operating manual The machine is located at our premises in 71334 Waiblingen-Beinstein and is immediately available. An inspection of the machine can be arranged by appointment.

Kondisi: bekas, Tahun pembuatan: 1989, Swing diameter over bed 300 mm Swing diameter over cross slide 150 mm Turning length 800 mm Spindle bore 36 mm Speed range 42 - 2000 rpm Feeds 0.011 - 0.91 mm/rev Tailstock quill taper MT 3 Total power requirement 2.2 kW Machine weight approx. 0.75 t Space requirement approx. 1.7 x 0.8 x 2.0 m Ppedperdwfzsfx Al Ijr The machine was in use at a school center—very little used!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, kecepatan spindel (maks.): 2.500 rpm, jarak pergerakan sumbu X: 340 mm, jarak gerak sumbu Z: 2.000 mm, daya motor spindle: 20.000 W, produsen pengendali: SIEMENS, model controller: Sinumerik 810D, jumlah sumbu: 2, Horizontal lathe from 2008. This Weiler E50x2000 has a center distance of 2000 mm and a swing over bed of 570 mm. It features a spindle bore of 83 mm and a maximum spindle torque of 1600 Nm. The machine underwent a complete overhaul in 2026, incorporating significant upgrades for enhanced performance. If you are seeking a high-quality lathe, consider the Weiler E50x2000 machine we are offering for sale. Please contact us for further details. • Control system: Weiler D3 with Siemens Sinumerik 810D • Centre distance: 2000 mm • Centre height: 280 mm • Swing over bed: 570 mm • Swing over cross slide: 340 mm • Cross slide travel: 340 mm • Bed slideway length: 560 mm • Spindle head: DIN 55025, size 8 • Spindle bore: 83 mm • Main spindle internal taper: Metric 90 • Main drive power: 20 kW (60% duty cycle); 17 kW (100% duty cycle) • Maximum spindle torque: 1600 Nm • Speed range: • Gear stage 1: 1–625 rpm Psdsy H E Akopfx Al Iepr • Gear stage 2: 4–2500 rpm • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Tailstock quill taper: Morse taper 5 • Toolholder system: Multifix size C or Parat size 3 • Availability: Machine available soon • Overhaul: being completely overhauled in 2026 • Hardening and grinding of all bed guideways; grinding of tailstock guideways • Overhaul of complete bed and cross-slide unit (grinding/scraping of all guideways) • Replacement of bed slideway liners • Replacement or re-shimming of keyways and lower guideways • Installation of a toolholder system on console (Multifix C or Parat size 3) • Overhaul of entire spindle housing assembly • Regrinding of main spindle (internal/external tapers and face) • Renewal of main spindle bearings • Replacement of X-axis ballscrew incl. bearings • Replacement of Z-axis ballscrew incl. bearings • Overhaul of tailstock quill and bore; replacement of spindle and nut • Renewal of all guideway wipers • Replacement of all drive belts • Cleaning and testing of main spindle motor • Overhaul of existing safety devices • Replacement of defective rotary, rocker, and limit switches • Replacement of spindle and handwheel encoders • Cleaning and inspection of automatic central lubrication system • Renewal of flexible cables and coolant hoses in the work area/to monitor • Replacement of membrane keypad (monitor) • Renewal of energy chains • Standard color repaint (standard texture) • DGUV and high-voltage testing with test report • Data backup of machine parameters/software • Geometric acceptance test per DIN 8605 Additional Equipment • Chip conveyor: used device included • Optional accessories: additional chip conveyor available The machine is being overhauled in July; images are for reference only and may differ from the actual appearance. Technical Specification Counter Spindle: No Driven Tools: No

Kondisi: bekas, Tahun pembuatan: 1971, de-maschinenparameter-0001 Podpfx Asy Hxp Dsl Iopr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, de Ppsdjw Ebdbjpfx Al Isr

Kondisi: baru, Tahun pembuatan: 2025, - New machine - Precision cycle-controlled lathe for chuck and shaft machining. Make: WEILER | Model: E 120 x 4500 | Year of manufacture: 2025 The Precise Giant. A powerful and energy-efficient production lathe with optimal accessibility. The machine for heavy workpieces. Maximum cost-effectiveness from turning to milling. Pedpfx Aey Hfy Ael Iepr Precise and universally applicable, it impresses with: - State-of-the-art control and drive technology - Extremely user-friendly operation and programming - Highest precision - Durability - Operator-friendly ergonomics TECHNICAL DATA / ACCESSORIES, EQUIPMENT: Control: Weiler Cycle Control ONE 1 (Siemens) Work area: - Centre height: 600 mm - Swing over bed: 1,200 mm - Swing over cross slide: 830 mm - Distance between centres: 4,500 mm Extensive, high-quality equipment. The sale within Germany includes a 24-month warranty. No guarantee for completeness or accuracy of technical specifications and equipment. - Subject to prior sale - A detailed technical data sheet and equipment information are available on request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Lunette tetap untuk mesin bubut WEILER E40 dan E50 dalam kondisi sangat baik. Harga lunette E40: €2.500 Pjdpfotx Avksx Al Ispr Harga lunette E50: €2.850 Rentang penjepitan: 10 - 150 mm.

Kondisi: baik (bekas), Tahun pembuatan: 2000, 10623 Ppjdpey Ed Rqefx Al Ijr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, kecepatan spindel (maks.): 2.500 rpm, jarak pergerakan sumbu X: 340 mm, jarak gerak sumbu Z: 1.100 mm, berat keseluruhan: 3.800 kg, jumlah sumbu: 2, Horizontal lathe from 2007. This WEILER E55X1000 features a maximum turning diameter of 315 mm and a distance between centers of 1100 / 2100 mm. It is equipped with a Sauter 8-station tool system and a spindle speed range of 1–2500 rpm. If you are seeking a high-quality lathe, you should consider the WEILER E55X1000 we have for sale. Please contact us for further details regarding this machine. • Internal taper: Metric 90 • Spindle diameter in front bearing: 120 mm • Spindle bore: 83 mm • Flange diameter: 500 mm • Max. turning diameter: 315 mm • Max. torque: 1600 Nm • Tool system: Sauter 8-station turret • Number of tool stations: 8 • Tool shank size: 32 x 25 mm • Turret interface: Capto C4 • Number of cross slides: 1 • Centre distance: 1100 / 2100 mm • Turning length: 340 mm • Tailstock taper: MT 5 • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Max. tailstock travel: 1000 / 2000 mm • Continuous speed (S1): Gear stage I: 89 rpm / Gear stage II: 355 rpm • Emission level: 80 dB(A) • Operating voltage: 400 V • Control voltage: DC 24 V • Connected load: 30 kVA • Rated current: 43 A • Frequency: 50 Hz • Main fuses: 50 A • Condition note: The ball screw in the Z-axis generates some noise, but dimensional accuracy is not affected. Additional equipment • Extraction system Technical Specification Ppodpfey Em A Asx Al Ier Counter spindle: No Driven tools: No

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, kecepatan spindel (maks.): 2.500 rpm, jarak pergerakan sumbu X: 340 mm, jarak gerak sumbu Z: 1.100 mm, tinggi total: 1.750 mm, lebar total: 1.850 mm, berat keseluruhan: 3.800 kg, panjang produk (maks.): 2.850 mm, jumlah sumbu: 2, Horizontal lathe from 2004. This Weiler E55X1000 features a maximum chuck diameter of 315 mm and a spindle diameter of 1 mm. It is equipped with a robust tooling system using a turret and offers a cutting speed of 140 m/min. If you are looking for a high-quality lathe, you should consider the Weiler E55X1000 we have on offer. Please contact us for further details. • kW = Active power (mechanical/electrical power) • 27 kVA = Apparent power (including reactive power) • Internal taper: metric 90 • Spindle diameter in the front bearing: 1 mm • Spindle bore: 83 mm • Max. faceplate diameter: 500 mm • Max. chuck diameter: 315 mm • Maximum torque: 1600 Nm • Tooling system: turret (VDI 40) • Tool shank size: 32 x 25 mm • Number of longitudinal slides: 1 • Number of cross slides: 1 • Centre distance: 1100 mm • Saddle travel: 340 mm • Tailstock taper: MK 5 • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 0 mm • Maximum tailstock travel: 1000 / 00 mm • Longitudinal feed rate: mm/rev • Cross feed rate: mm/rev • Rapid traverse longitudinal: 10 m/min • Rapid traverse cross: 5 m/min • Longitudinal feed force: 10,000 N • Cross feed force: 7,000 N • Metric thread range: 0.1 - 250 mm • Whitworth thread range: 1/4 - 56 TPI • Module range: • DP range: 0.05 - 48 • Maximum cutting cross-section: 2.25 mm² • Cutting speed: 140 m/min • Gear stage I: 89 rpm at 100% duty cycle • Gear stage II: 355 rpm at 100% duty cycle • Coolant consumption (normal): 30 l/min at 0.4 bar • Coolant consumption (increased): 30 l/min at 3.5 bar • Noise level: 80 dB(A) • Electrical: • Operating voltage: 400 V Ppsdpfx Aey Em Avjl Ior • Control voltage: DC 24 V • Connected load: 30 kVA • Rated current: 43 A • Frequency: 50 Hz • Main fuses: 50 A • Condition: A small actuator that switches between the gearbox stages is defective; both gearbox stages are operational. Additional equipment • Chip conveyor Technical Specification Counter spindle: No Driven tools: No

Kondisi: bekas, Tahun pembuatan: 1993, 26036 Ppsdpoy D N Dasfx Al Ijr

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, drehdurchmesser570 Ppodpfx Alsy D T Uvj Ior

Kondisi: sangat baik (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, Weiler Condor B dalam kondisi sangat baik Digital 3 sumbu Heidenhain ND 970 Bidang pembubutan 330 x 750 mm Putaran mesin 22 - 2800 rpm Lubang spindle 40 mm Chuck 3 rahang Forkhardt 160 mm dengan batang baji Multifix B dengan 4 dudukan, senter berjalan, chuck bor quick-release, sistem pendingin, kaki mesin, lampu mesin LED, perangkat pemutus ulir, dokumentasi lengkap. Dimensi: P 1,85 m T 1,45 m L 0,9 m Ppjdpfx Aley H Eypo Ior Berat: sekitar 1100 kg Perlengkapan keselamatan: pelindung percikan, pelindung chuck dengan pengawasan elektrik, proteksi start, rem spindle, emergency stop. Kondisi: sangat baik, cat original, rel dan performa berjalan sangat mulus. Mesin terbukti berasal dari bengkel pelatihan. Dapat diperlihatkan dalam keadaan bekerja. Bebas muat D - 88433 Schemmerhofen.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Mesin Bubut L & Z / WEILER DA 210x1000 / Dengan Tampilan Digital 3 Sumbu Baru - Tahun pembuatan 2005 - Penanda CE - Panduan dalam kondisi baik - DATA TEKNIS LENGKAP LIHAT FOTO - Tampilan digital tiga sumbu "BARU" - Perangkat penjepit collet pelepas cepat termasuk 79 buah collet (173E) - Dudukan dasar Multifix dengan sisipan - Chuck tiga rahang - Pelindung chuck elektrik - Pelindung geser tambahan - Perlengkapan pendingin - Chuck bor / senter putar - Dinding belakang penahan serbuk - Lampu kerja - Dokumentasi lengkap Ppsdoy H Ikqjpfx Al Ier Ukuran: PxLxT 2,8x1,2x1,8 meter / Berat 1600 kg Kesalahan ketik/tulis dapat terjadi.

Kondisi: bekas, Dijual mesin bubut bekas Weiler Matador. Tipe VS2 dengan transmisi presetel. Termasuk roda gigi pengganti dan set collet. Dalam kondisi fungsional yang baik. Ketinggian pusat: 140 mm Putaran di atas tempat tidur: 295 mm Jarak pusat: 500 mm Pedey Hi A Iopfx Al Ijpr Lubang spindel: 36 mm Kecepatan spindel: 15 - 3350 rpm Inspeksi dalam kondisi terhubung listrik dapat dilakukan di 5023 Salzburg. Forklift untuk pemuatan tersedia.

Kondisi: bekas, WEILER Commodor termasuk indikator digital 3-sumbu Heidenhain - Indikator digital 3-sumbu / Heidenhain - Ketinggian senter 180 mm - Diameter putar di atas tempat tidur 330 mm - Jarak antara senter 1000 mm - Lubang spindel 56 mm - Kecepatan spindel 25–2000 rpm - Feed otomatis longitudinal / datar - Ulir / metrik / inci / modul dll. - Dudukan dasar Multifix dengan sisipan - Pelindung chuck - 2x tombol darurat - Chuck tiga rahang - Pelindung chip belakang - Kondisi sangat terawat - Kaki mesin - Dokumentasi Dimensi: P x L x T 2,3 x 1,2 x 1,6 meter / Berat 1600 kg Ppjdey Dcppopfx Al Ijr Kesalahan dan salah input data dapat terjadi.

Kondisi: baik (bekas), Please read the technical specifications in full. If you are considering this machine as an investment, we kindly request your complete identification including a correct phone number and email address in order to submit a quotation. WEILER Precision Lathe MATADOR with HEIDENHAIN 3-axis digital readout Year of manufacture: approx. 1980, retrofitted with emergency stop and electrically interlocked chuck guard. Centre height: 145 mm Centre distance: 500 mm Swing diameter over cross slide: 160 mm Spindle nose: DIN 55022 Gr. 5 Spindle bore: 36 mm Spindle speeds: 30 – 3,000 rpm Motor power: approx. 3.0 kW Tailstock quill: MT 3 Quill stroke: 90 mm Weight: approx. 620 kg Dimensions: 1420 x 700 x 1200 mm Technical data subject to change without notice! Robust leadscrew/feed shaft lathe for the workshop and professional DIY user Condition: good Equipment: - 3-axis precision digital readout HEIDENHAIN - Quick-action lever collet chuck - Electrically interlocked chuck guard - Multifix tool post size A - 3-jaw chuck - Coolant system - Machine feet - Chip guard at rear - Machine lamp - Bed stop Ppjdpfx Aloxx S Hdo Ier - Emergency stop button - Lockable tool compartment - Automatic feeds for longitudinal and face carriage Safety features: – Electrically interlocked chuck guard – Emergency stop button – Brake motor Available from March 2026.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, jam operasional: 35.626 h, kecepatan spindel (maks.): 3.000 rpm, jumlah sumbu: 2, Horizontal lathe from 1998. This Weiler E35 features a centre distance of 950 mm and a swing over bed of 410 mm. It has a spindle bore of 54 mm and a maximum spindle torque of 700 Nm. If you are looking for a high-quality lathe, you should consider the Weiler E35 we have for sale. Contact us for further details. Ppodpfsy Axu Sex Al Ior Centre distance: 950 mm Centre height: 200 mm Swing over bed: 410 mm Swing over cross slide: 200 mm Cross slide travel: 230 mm Bed length: 480 mm Spindle nose: DIN 55025 size 6 Spindle bore: 54 mm Spindle taper: Morse taper 6 Drive power (100% / 60% duty cycle): 7.5 / 9 kW Max. spindle torque: 700 Nm Speed range: 1–3,000 rpm Gear range I: 1–750 rpm Gear range II: 4–3,000 rpm Tailstock quill diameter: 65 mm Tailstock quill travel: 120 mm Tailstock taper: Morse taper 4 Tool system: Parat size 2 Control: D2 Number of axes: 2 (X, Z) Technical Specification Counter spindle: No Driven tools: No

Kondisi: sangat baik (bekas), Weiler Primus VC Precision Centre Lathe with 3-axis HEIDENHAIN digital readout (latest generation) with VC drive, stepless speed control, and CE certification, in geometrically as-new condition Technical Data: Year of manufacture: 1999 Machine no. 208 Centre height: 140 mm Centre distance: 500 mm Swing diameter over bed: 280 mm Swing diameter over cross slide: 135 mm Spindle speeds: up to 4000 rpm, stepless Main drive: approx. 4 kW Spindle bore: 40 mm Camlock spindle nose DIN 55027 size 5 with bayonet locking Tailstock: MT 3 Quill stroke: 40 mm Ppsdpfjyglk Hjx Al Ijr Longitudinal feeds: from 0.02 to 0.63 mm/rev Cross feeds: from 0.005 to 0.2 mm/rev Metric thread pitches: from 0.25 to 8 mm Module pitches: from 0.2 to 4 mm (19 steps) Weight: approx. 800 kg Machine dimensions (W x D x H): 1.4 m x 0.935 m x 1.55 m Equipment and Accessories: - 3-axis HEIDENHAIN digital readout (latest generation) - Spindle speed display - 140 mm 3-jaw chuck with reversible jaws - Multifix quick-change tool post size “A” - Electrically interlocked safety chip guard - Covered lead and feed screw - Lockable tool compartment - Rear splash guard - Simple bed stop - Switchable spindle brake - Operating manual - Machine lamp The machine comes from a vocational school and is in exceptionally top condition. Thanks to its safety features and renowned WEILER precision, this lathe is ideal for training purposes as well as tool and machine construction. Note to private buyers: The machine is priced well into the five-digit range.

Kondisi: baik (bekas), Tahun pembuatan: 2008, Weiler DZ 40, tahun pembuatan 2008, kontrol Siemens 840 D, perjalanan X/Z 200/350 mm, diameter putar 180 mm, diameter lingkar maksimum Ø 560 mm, sumbu Y +/- 25 mm, sumbu Q / tailstock yang dapat diprogram, perjalanan sumbu Q 360 mm, sistem pengukuran sumbu Q rotatif, tailstock MK 4, spindle utama maksimum lubang batang 42 mm, lubang spindle 52 mm, rapid traverse X/Z/Q 30/30/20 m/menit, turret 16 posisi – semua posisi digerakkan, VDI 25, diameter shank 25 mm, alat berputar hingga 4.500 rpm, wadah bagian, aksesori, pemegang alat berputar, pemegang kaku. Ppodpfx Asy Ev Iuel Ier

Kondisi: bekas, Tahun pembuatan: 1999, panjang pembubutan: 1.000 mm, diameter pembubutan: 500 mm, lubang spindel: 80 mm, kecepatan spindel (maks.): 2.500 rpm, kapasitas 1000x570MM lubang spindle 80MM turel multifix Ppedpsy E Hvvjfx Al Ijr kontrol Siemens

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Drehdurchmesser 410/ 440 mm Drehlänge 950 mm Steuerung Siemens / Weiler D2 Werkstückgewicht max 900 kg Spindelkopf Gr 6 MK 6 Spindelbohrung 54 mm Planhub 230 Pinolen-Durchmesser MK 4 mm Pinolenhub 120 mm Spitzenhöhe 200 mm Gewindesteigung max. in mm 0,1 - 250 mm Spindeldrehzahlen - stufenlos 1 - 3000 U/min Gesamtleistungsbedarf 12 kW Maschinengewicht ca. 2,1 t Raumbedarf ca. 2,3 x 1,5 x 1,8 m Ppsdpfoyrh Apjx Al Ijr