Beli Weiler Cnc 160 bekas (181)

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 1987, Fungsionalitas: tidak berfungsi, Kerusakan: Hubungan pendek pada papan kontrol motor (lihat layar) Ø maks. putar di atas tempat tidur: 280 mm Ø maks. putar di atas dudukan pelana: 140 mm Jarak gerak: Z= 350, X= 230 mm Lubang spindle: 41 mm Gtjdpfx Ahsyrqwie Dow Maks. lubang spindle: 41 mm Pemegang alat: Baruffaldi 4 posisi Tailstock Dimensi PxLxT: 2600 x 2000 x 1900 mm Berat: 1.500 kg

Kondisi: baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 192 mm, panjang pembubutan: 600 mm, kecepatan spindel (maks.): 2.500 rpm, kecepatan spindel (min.): 48 rpm, jarak pergerakan sumbu X: 150 mm, jarak gerak sumbu Z: 650 mm, tinggi total: 1.245 mm, panjang total: 1.582 mm, lebar total: 715 mm, berat keseluruhan: 680 kg, Perlengkapan: dokumentasi / manual, Weile Praktikant 160 B berfungsi penuh dan terawat • Layar digital Mitutoyo 3-sumbu (KA-200 Counter) dengan memori perkakas • Set collet dari Ø1mm - Ø29mm • Chuck tiga rahang Röhm DURO-M 160 inkl. rahang lunak Gedpfx Ahsyr Scte Dstw • Set pemegang ulir dari Akon baru dengan set tap ulir • Chuck bor dari Albrecht Ø 0-10mm dan Ø1-13mm • Set bor Ø0,5-13mm • Berbagai pemegang bubut untuk dalam dan luar, dengan 5 pemegang Multifix tipe A • Dokumentasi lengkap

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 8.000 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 750 mm, diameter pembubutan: 330 mm, lubang spindel: 41 mm, kecepatan spindel (maks.): 4.500 rpm, kecepatan spindel (min.): 1 rpm, daya motor spindle: 11.000 W, diameter quill: 50 mm, gores kuas bulu: 110 mm, diameter pembubutan di atas alas geser: 435 mm, berat keseluruhan: 1.400 kg, tinggi pusat: 165 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, For sale: Cycle-controlled WEILER E30X750 CNC lathe (year 2007) with Siemens 810 D control system. Key Facts: Manufacturer/Model: WEILER E30x750 Year of manufacture: 2007 Control system: Siemens 810 D Condition: Fully operational, ready for immediate use Location: Austria (Graz) Inspection: On site or via video call by arrangement Gtedpfevphv Tox Ah Dsw Power-on hours (machine powered): 26,492 h (Actual operating hours considerably lower! Based on experience, spindle run time (actual turning) typically accounts for only about 30% to 50% of this figure (approx. 8,000 to 13,000 hours)) Electrical connection: 400 V Technical Specifications: Working Area Centre height: 165 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 160 mm Centre distance: 750 mm Spindle Spindle nose DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 40.5 mm Spindle diameter in front bearing: 70 mm Max. spindle torque: 180 Nm Main Drive Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 rpm Number of speed ranges: stepless Feed / Rapid Traverse Feed drive: three-phase AC feed drives Feed range (stepless): longitudinal: 0.001–50 mm/rev (additionally specified 0–20 mm/rev) cross: 0.001–50 mm/rev Feed force: longitudinal: 6,000 N cross: 3,000 N Max. rapid traverse speed longitudinal/cross: 8 / 4 m/min (additionally specified: 10 / 7.5 / 5 / 3.5 m/min) Thread Cutting Range Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 TPI Tailstock / Quill Quill diameter: 50 mm Quill stroke: 110 mm Quill taper DIN 228: MK 3 Accuracy Acceptance accuracy: DIN 8605 Dimensions / Weight Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1800 × 1350 × 1700 mm Note: The original price was €97,000. Interested? Contact us for further information or to arrange a viewing appointment.

Kondisi: baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant 160 B, tahun pembuatan 1991, tampilan digital 3 sumbu, ketinggian center 160 mm, jarak center 650 mm, kecepatan spindle hingga 2.500 rpm, tailstock, set collet, chuck, penahan, 1 set panduan alas. Gtedpfxsyn Auxo Ah Dsw

Kondisi: bekas, Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 91-160-2498, mesin bubut lead-screw dan feed-screw bekas WEILER PRAKTIKANT 160 Ketinggian pusat: 160 mm Gedpfsyciw Aex Ah Dotw Jarak antara pusat: 650 mm Putaran spindle utama sekitar 48-2.500 rpm Diameter lubang spindle: 40,5 mm Batang lead-screw dan feed-screw tertutup. Ruang lingkup pengiriman: dengan display digital 3-sumbu Heidenhein, pelindung cip di belakang, perangkat collet pengunci tuas tanpa collet, 1 x piringan muka Ø 250 mm, pelindung chuck dengan pengaman listrik, lampu mesin, penjepit alat cepat Multifix Gr. A dengan 4 dudukan, pembatas ranjang, unit pendingin cairan dan steady rest tetap. Mesin tersedia di lokasi kami di 71334 Waiblingen-Beinstein dan siap untuk dikirim segera. Inspeksi mesin dapat dilakukan sesuai perjanjian.

Kondisi: baik (bekas), Tahun pembuatan: 1988, 1 mesin bubut lead and drag spindle bekas Merek: Weiler Tipe: 160 B Tahun pembuatan: 1988 Data Teknis Jarak antara senter: 650 mm Diameter putaran di atas tempat tidur: 320 mm Diameter putaran di atas eretan plan: 192 mm Ketinggian senter: 160 mm Lubang spindle: 40 mm Daya nominal: 2,4 / 3 kW Kecepatan putar: 48 – 2500 rpm Dimensi: sekitar P 2,20 x L 1,10 x T 1,40 m Berat: sekitar 1 ton Gedpfx Aow Sdr Heh Dstw Perlengkapan Layar digital Heidenhain Kepala pemegang Multifix dengan berbagai sisipan Chuck 3 rahang Tombol darurat

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C, ex-technical school Technical Data: >> Year of manufacture: 1992 Machine no.: 92 160 3260 >> Centre height: 160 mm >> Distance between centres: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread cutting options: metric, imperial, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake selectable Gtodpfx Ahex Eb A Uo Djw >> Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: >> 3-axis digital readout from K&C with operating manual Functions: mm/inch conversion, coordinate selection ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switch, >> Collet chuck with NEW collets from 3 to 26 mm in 1 mm increments >> 160 mm three-jaw chuck (with 1 set of jaws) >> Quick-change toolpost with 4 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Coolant system >> Operating manual, spare parts list About the machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe with toolroom accuracy, year 1992, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce ground-like finishes. You are welcome to inspect the machine under power on site and see its condition for yourself.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1990, Universal lead and feed screw lathe Brand: WEILER Model: Praktikant 160 B Year of manufacture: 1990 – overhauled Newly painted in RAL 7035 light grey Machine no.: 90-160-2054 Centre height: 160 mm Centre distance: 650 mm Gtedpfxshy Tdyj Ah Djw Geometric acceptance with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i T - Covered lead and feed screw - Braked drive motor - Coolant system - Electrically interlocked chuck guard - Quick-change tool post size A - Simple bed stop - Chip guard (rear wall) - Operating manual With warranty Sold as seen/used The machine is technically compliant with the state of the art at the time of manufacture.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4397, Dear Sir or Madam, For sale is a Weiler Praktikant 160 AC lathe, year of manufacture 1998, equipped with an original Weiler 3-axis digital readout. This newer "AC" version stands out in particular due to its stepless speed control, which makes working on the already highly user-friendly machine even easier. The machine has undergone a comprehensive partial overhaul in our workshop, so it is in excellent technical and optical condition. All guideways are in good order, the gearboxes run quietly, and the levers operate smoothly. You are welcome to inspect the machine and its condition at our premises. Availability: on request Machine no.: 4397 Year of manufacture: 1998 Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Spindle speed: 20-3000 rpm, stepless Tailstock quill taper: MT3 Quill stroke: 85 mm Longitudinal feed range: 0.020 - 0.630 mm/rev Cross slide feed range: 0.006 - 0.200 mm/rev Threading options: Metric, Inch, Module, Diametral Pitch Metric thread pitch: 0.25 - 8 mm Spindle brake: switchable Total connected load: 7.5 kVA Voltage: 400 V Dimensions: approx. 1.58 x 0.9 x 1.5 m (LxHxW) Weight: approx. 720 kg Further equipment and accessories: 3-axis digital readout, coolant system, chuck guard, 3-jaw chuck, and additional accessories available on request... Godsq H D U Espfx Ah Dotw Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can carry out a complete or partial overhaul of your chosen machine - Upon request, we repaint your machine in your desired colour - Upon request, you can directly order further accessories such as tools, etc. - Upon request, we can fit additional accessories such as safety features, etc. - We are happy to take care of shipping and/or installation.

Kondisi: bekas, Tahun pembuatan: 1986, Swing over bed: 320 mm Swing over cross slide: 198 mm Turning length: 650 mm Total power requirement: 2.2 kW Machine weight approx.: 650 kg Gedeufud Depfx Ah Dstw Space required approx.: 1700x1000x1700 mm Digital display: 3-axis digital readout Bar capacity: Ø 40 mm Speed range: 96 - 2500 rpm Spindle nose: A 2 - 5 Feed range: 0.007 - 0.63 mm/rev Thread cutting capability: metric 0.25 - 8 mm, inch 80 - 2 TPI, diametral pitch 200 - 5 DP, module 0.2 - 4 Tailstock: MT 3 3-jaw chuck: 160 mm Quick-change tool post Multifix: Type B

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 40 mm, tinggi pusat: 160 mm, lebar di tengah: 650 mm, Dear Sir or Madam, For sale is a Weiler Praktikant 160B lathe equipped with a brand new 3-axis digital readout from K+C (including a 12-month manufacturer's warranty). The machine has been extensively partially overhauled in our workshop, ensuring it is in excellent technical and visual condition. All guideways are in good order, the gearboxes run quietly, and the levers switch smoothly. You are welcome to inspect the machine on site to verify its condition. Availability: on request Centre height: 160 mm Gsdpfowhzdmsx Ah Djtw Distance between centres: 650 mm Spindle bore: Ø 40 mm Tailstock taper: MT3 Quill travel: 85 mm Longitudinal carriage feed range: 0.020 – 0.630 mm/rev Cross slide feed range: 0.006 – 0.200 mm/rev Possible thread types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: switchable Total connected load: 7.5 kVA Voltage: 400 V Dimensions (approx.): 1.58 x 0.9 x 1.5 m (L x H x W) Weight (approx.): 720 kg Additional features and accessories: NEW 3-axis digital readout, coolant system, chuck guard, leadscrew and feed shaft cover, 2x emergency stop, operating manual, and many more options available on request... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines undergo thorough inspection - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can perform a complete or partial overhaul of your selected machine - Upon request, we can repaint your selected machine in your desired color - Additional accessories such as tools, etc. can be ordered together if required - If requested, we can install accessories such as safety devices for you - We are happy to arrange shipping and/or delivery

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 320 mm, panjang pembubutan: 650 mm, lubang spindel: 40 mm, kecepatan spindel (maks.): 2.500 rpm, kecepatan spindel (min.): 48 rpm, translation-001 Gtjdoytd Ukopfx Ah Dow

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant 160B Precision Centre Lathe with 3-Axis K&C Digital Readout, NEW. Overhauled, including acceptance protocol certifying new-machine tolerances. Technical Specifications: >> Machine No.: 87 160 760 >> Centre height: 160 mm >> Distance between centres: 650 mm >> Spindle speeds: 24 to 2,500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5, with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Electrically selectable spindle brake >> Dimensions (LxHxW): 1.6 m x 1.25 m x 0.7 m Equipment & Accessories: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty, incl. operation manual Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, selectable count direction >> New collet chuck, NEW collets 3–25 mm in 1 mm increments Gtodpevrdlcofx Ah Dow >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix tool post size A, with 3 steel holders >> Electronic spindle guard >> NEW LED machine lamp >> NEW machine mounts >> Splash guard >> Operating manual and spare parts plan (PDF) About the Machine: Offered is a Weiler Praktikant 160 B engine lathe with leadscrew and feedscrew, reconditioned to toolroom accuracy and fully geometrically overhauled, including an acceptance protocol confirming new-machine tolerances. Safety features: electronic spindle guard, covers for leadscrew and feedscrew, 2 emergency stop buttons, and a braking motor. This latest generation of Weiler lathes is highly user-friendly and enables ground-like surface finishes. Take the opportunity to inspect and test the machine under power onsite to verify its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, en-Weiler Praktikant 160 B Leadscrew and Feed Shaft Lathe with 3-Axis Digital Readout K&C NEW Technical Data: >> Year of manufacture: 1986 Machine no.: 86-160-348 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds (8 steps): from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.02 to 0.63 mm/rev >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake selectable >> Length: 1.6 m, Height: 1.25 m, Depth: 0.7 m Accessories and Features: Gedpfxjwthbij Ah Dotw >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck, collets as new from 1 to 29 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear splash guard >> Machine feet >> Coolant system About the Machine: A Weiler Praktikant 160 B leadscrew and feed shaft lathe is being offered here, built to toolmaker’s precision and in very good condition. The machine is, of course, fully functional. The Weiler has been completely dismantled and newly painted in light grey. All cross slides move very smoothly and evenly. The Weiler also runs smoothly at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and capable of producing ground-like surface finishes. Take the opportunity to view the machine under power on site and see the condition for yourself.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, en-Weiler Praktikant 160 B lead and feed screw lathe with 3-axis digital readout from K&C, from vocational school use Technical data: >> Year of manufacture: 1992 | Machine no.: 92 160 3271 >> Centre height: 160 mm >> Distance between centres: 650 mm >> Spindle speeds: 24 - 2500 rpm >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock quill: MT 3 >> Feeds: 0.02 - 0.63 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral-Pitch threads possible >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Electrically actuated spindle brake >> Dimensions: Length 1.6 m | Height 1.25 m | Depth 0.7 m Equipment and accessories: >> 3-axis digital readout from K&C with manual Functions: mm/inch conversion, ABS/INC coordinate selection, display value halving, reference mark, tool data storage for 200 tools, taper calculation, radius/diameter function, quick zero, counting direction reversal >> Collet chuck system with NEW collets from 3 - 26 mm in 1 mm increments >> 160 mm three-jaw chuck (Kelistangen) with 1 set of jaws Gtjdpfx Ahjx H S D Is Dew >> Quick-change toolpost system with 4 tool holders >> Bed stop >> Electronic spindle protection >> Rear splash guard >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe in toolmaker's accuracy, built in 1992, in very good condition. The machine is, of course, fully operational. All slides move very smoothly and evenly. The Weiler also runs smoothly at high speeds. This newer generation of Weiler lathes is very user-friendly and surface finishes comparable to grinding can be achieved. Take the opportunity to inspect the machine on site under power and see the condition for yourself.

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 40 mm, tinggi pusat: 160 mm, lebar di tengah: 650 mm, gores kuas bulu: 85 mm, panjang total: 1.600 mm, lebar total: 900 mm, tinggi total: 1.500 mm, Dear Sir or Madam, For sale is a Weiler Praktikant 160B lathe with 3-axis digital readout. The machine has been extensively partially overhauled in our workshop and is therefore in excellent technical and visual condition. All guides are in good condition, the gears run smoothly, and the levers can be easily operated. You are welcome to visit us and inspect the machine's condition for yourself. Availability: on request Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Gtjdpfou H U S Hex Ah Dsw Tailstock quill taper: MT3 Quill stroke: 85 mm Longitudinal feed range: 0.020 - 0.630 mm/rev Cross slide feed range: 0.006 - 0.200 mm/rev Thread types possible: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Total connected load: 7.5 kVA Voltage: 400 V Dimensions: approx. 1.58 x 0.9 x 1.5 m (L x H x W) Weight: approx. 720 kg Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, 3-jaw chuck, and further accessories available on request... Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced as a matter of course - Upon request, we can perform a full or partial overhaul of your selected machine - Upon request, we can repaint the selected machine in your preferred color - Upon request, you can order additional accessories such as tooling directly - Upon request, we can install further accessories such as safety devices - We are happy to arrange shipping and/or installation

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 83 mm, diameter pembubutan: 570 mm, diameter ayun di atas peluncur silang: 340 mm, tinggi pusat: 280 mm, kecepatan spindel (maks.): 2.500 rpm, Mesin ini, karena konstruksi yang kokoh, cocok untuk pekerjaan bubut berat dan produksi seri! DETAIL TEKNIS Rentang kecepatan putar: 1 – 2.500 rpm Torsi: 1.300 – 1.600 Nm Diameter ayun di atas tempat tidur: 570 mm Diameter ayun di atas carriage: 340 mm Tinggi pusat: 280 mm Jarak antara pusat: 2.000 mm Lubang spindle: 83 mm (opsional 128 / 165 mm) Jumlah posisi pada turret alat: 8 Kopling turret alat: VDI 40-shank Diameter pinol senter: 80 mm Kerucut dalam senter: MK5 DETAIL MESIN Gtsdpjymx N Njfx Ah Dsw Model kontrol: WEILER SIEMENS 810D Daya motor utama: 20 / 17 kW (60% / 100% duty cycle) Dimensi & Berat Dimensi (P x L x T): 3.850 mm × 1.850 mm × 1.750 mm Berat mesin: 4.200 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Weiler E50 x 1000 Precision Lathe (2003) Manufacturer: Weiler Gtsdpoyucf Rsfx Ah Dsw Model: E50 x 1000 Year of manufacture: 2003 Condition: good, used, under power Operating hours: 43,000 h For technical data, see images. Scope of delivery: - Original documentation - Rota S Plus 250-62 - Steady rest - Parat 4-position tool turret

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant VC Precision Lathe Manufacturer: Weiler Model: Weiler Praktikant VC Precision Lathe Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Technical Details Turning diameter: 250 mm Turning length: 650 mm Centre height: 160 mm Swing diameter over bed slide: 320 mm Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Drive power – main spindle: 10 / 6.0 kW Gear stages: 1 Spindle nose: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool Post: System: MultiFix B Turning tool shank size: 20 x 20 Tailstock: Quill stroke: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inch: 80–2 1/” Module: 0.25 – 4 mm Travel: Cross slide travel: 150 mm Top slide travel: 110 mm Godpfxsyucd Tj Ah Dstw Swivel range: 180° Total connected load: 15 kVA Machine weight: approx. 1.0 t Space requirement: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC Precision Lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool kit

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, diameter kolom: 400 mm, diameter bor: 65 mm, Drilling and thread cutting in all directions Movable in 7 axes Quick setup, high precision, and performance for heavy and bulky components. Areas of application: Turbines, generators, compressors, steel construction, boiler construction, vessels, chemical plants, cement kilns, and shipbuilding Arm length: 2070mm Max. drilling diameter in iron: 65mm Max. tap diameter: M48 Quill stroke: 350mm Max. distance spindle – table: 1550mm Min. distance spindle – table: 305mm Spindle speed: 900 rpm Gjdsyub Spepfx Ah Detw Tool holder: ISO 5 / BT / MK Column diameter: 400mm Power output: 4 kW Max. drilling diameter in steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is supplied in good faith, but accuracy cannot be guaranteed. Accordingly, no representations or contract terms are made. We recommend verifying all critical details.

Kondisi: bekas, Tahun pembuatan: 2002, translation-001 Gtedpsycxibefx Ah Djw

Kondisi: bekas, 1 Gtsdpfsyr R Dcox Ah Dow

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 280 mm, WEILER_MATADOR_VS2_nl-hu Gjdpfoytd U Rjx Ah Detw

Kondisi: bekas, en-001 Gtjdsk S Ht Ajpfx Ah Djw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1990, jam operasional: 51.392 h, tinggi total: 1.700 mm, berat keseluruhan: 1.300 kg, This Weiler E30 was manufactured in 1990. A robust centre lathe featuring a spindle bore of 42 mm and a swing over bed of 330 mm. It supports a wide range of thread cutting operations, from metric to DP threads, and comes equipped with a Multifix toolpost size B. Ideally suited for precise and versatile turning tasks. Please contact us for further information about this machine. Additional Equipment • Multifix toolpost size B mounted • Fixed steady rest (optional), clamping range: 15–100 mm • Travelling steady rest (optional), clamping range: 10–85 mm • Collets from 3 mm (in 0.5 mm increments) • Tailstock with a MK3 sleeve Machine Advantages Technical Machine Advantages • Drive power 100% / 60% duty cycle: 9/11 kW • Maximum spindle torque: 180 Nm • Total speed range: 1–4500 rpm • Feed drive: three-phase AC feed motors • Longitudinal feed range: 0–20 mm/rev • Rapid traverse longitudinal/cross: 10/7.5/5/3.5 m/min • Quill diameter: 50 mm • Quill stroke: 110 mm • Quill taper: MK 3 Additional Information Swing over cross slide: 160 mm Bed width: 240 mm Travel of cross slide: 180 mm Saddle slideway length: 395 mm Turning tool cross section (H x W): 20 x 20 mm Spindle nose according to DIN 55027, size 5 Spindle diameter at front bearing: 70 mm Main spindle taper: MK 5 Workpiece: Metric thread range: 0.1 – 400 mm Inch thread range: G/1" 1/4 – 56 Module thread range: mm DP thread range: 1–224 G/" Maximum number of threads: 50 Gtjdpjyaimfofx Ah Djw Dimensions Machine depth: 1800 mm