Beli Weiler Commodor 75 bekas (180)

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant VC Precision Lathe Manufacturer: Weiler Model: Weiler Praktikant VC Precision Lathe Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Technical Details Turning diameter: 250 mm Kljdpfx Agoyucd Ts Rsp Turning length: 650 mm Centre height: 160 mm Swing diameter over bed slide: 320 mm Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Drive power – main spindle: 10 / 6.0 kW Gear stages: 1 Spindle nose: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool Post: System: MultiFix B Turning tool shank size: 20 x 20 Tailstock: Quill stroke: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inch: 80–2 1/” Module: 0.25 – 4 mm Travel: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel range: 180° Total connected load: 15 kVA Machine weight: approx. 1.0 t Space requirement: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC Precision Lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool kit

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, diameter kolom: 400 mm, diameter bor: 65 mm, Drilling and thread cutting in all directions Movable in 7 axes Quick setup, high precision, and performance for heavy and bulky components. Klsdpeyub Spefx Ag Rjp Areas of application: Turbines, generators, compressors, steel construction, boiler construction, vessels, chemical plants, cement kilns, and shipbuilding Arm length: 2070mm Max. drilling diameter in iron: 65mm Max. tap diameter: M48 Quill stroke: 350mm Max. distance spindle – table: 1550mm Min. distance spindle – table: 305mm Spindle speed: 900 rpm Tool holder: ISO 5 / BT / MK Column diameter: 400mm Power output: 4 kW Max. drilling diameter in steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is supplied in good faith, but accuracy cannot be guaranteed. Accordingly, no representations or contract terms are made. We recommend verifying all critical details.

Kondisi: bekas, Tahun pembuatan: 2002, translation-001 Kledjycxibspfx Ag Rjp

Kondisi: bekas, 1 Kljdpfxsyr R Dco Ag Rep

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 280 mm, WEILER_MATADOR_VS2_nl-hu Ksdjytd U Rspfx Ag Rslp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 320 mm, panjang pembubutan: 650 mm, lubang spindel: 40 mm, kecepatan spindel (maks.): 2.500 rpm, kecepatan spindel (min.): 48 rpm, translation-001 Kjdpeytd Ukofx Ag Relp

Kondisi: bekas, en-001 Ksdpfx Aok S Ht Aeg Rolp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1990, jam operasional: 51.392 h, tinggi total: 1.700 mm, berat keseluruhan: 1.300 kg, This Weiler E30 was manufactured in 1990. A robust centre lathe featuring a spindle bore of 42 mm and a swing over bed of 330 mm. It supports a wide range of thread cutting operations, from metric to DP threads, and comes equipped with a Multifix toolpost size B. Ideally suited for precise and versatile turning tasks. Please contact us for further information about this machine. Additional Equipment • Multifix toolpost size B mounted • Fixed steady rest (optional), clamping range: 15–100 mm • Travelling steady rest (optional), clamping range: 10–85 mm • Collets from 3 mm (in 0.5 mm increments) • Tailstock with a MK3 sleeve Machine Advantages Technical Machine Advantages • Drive power 100% / 60% duty cycle: 9/11 kW • Maximum spindle torque: 180 Nm • Total speed range: 1–4500 rpm • Feed drive: three-phase AC feed motors • Longitudinal feed range: 0–20 mm/rev • Rapid traverse longitudinal/cross: 10/7.5/5/3.5 m/min • Quill diameter: 50 mm • Quill stroke: 110 mm • Quill taper: MK 3 Additional Information Swing over cross slide: 160 mm Bed width: 240 mm Travel of cross slide: 180 mm Saddle slideway length: 395 mm Turning tool cross section (H x W): 20 x 20 mm Spindle nose according to DIN 55027, size 5 Spindle diameter at front bearing: 70 mm Main spindle taper: MK 5 Kedpfx Asyaimfsg Rslp Workpiece: Metric thread range: 0.1 – 400 mm Inch thread range: G/1" 1/4 – 56 Module thread range: mm DP thread range: 1–224 G/" Maximum number of threads: 50 Dimensions Machine depth: 1800 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, kecepatan spindel (maks.): 2.500 rpm, tinggi total: 1.785 mm, berat keseluruhan: 3.850 kg, jumlah sumbu: 2, This Weiler E50 was manufactured in 2009. It is a robust horizontal lathe featuring a swing diameter over bed of 570 mm and a spindle bore of 83 mm. The machine offers a bed width of 350 mm and a tool cross-section of 32 x 25 mm, making it ideal for precise and efficient turning operations. Please contact us for more information about this machine. Machine Advantages Quality-Related Advantages • Spindle diameter at front bearing: 120 mm • Spindle bore: 83 mm • Main spindle internal taper: metric 90 • Longitudinal and planar feed range: 0-20 mm/rev • Longitudinal feed force: 10,000 N • Planar feed force: 7,000 N • Rapid traverse longitudinal/planar: 10/7 m/min or 5/3.5 m/min • Metric threads: 0.1-400 mm • Inch threads: 1/4" - 56 tpi/1" • Module threads: Technical Machine Advantages • Drive power (60% / 100% duty cycle): 20/17 kW • Max. spindle torque: 1,600 Nm • Gear range I: 1-625 rpm • Gear range II: 4-2,500 rpm • Bed width: 350 mm • Quill diameter: 80 mm • Quill stroke: 200 mm • Quill internal taper: MK 5 • Turning tool section (height/width): 32 x 25 mm • Spindle nose as per DIN 55027: size 8 Additional Information Machine still under power/ DP threads: 1 - 224/ Fixed steady rest clamping range: 12-150 mm / 120-270 mm/ Travelling steady rest clamping range: 12- mm/ The machine has been efficiently operated in single-shift mode since acquisition/ Chuck with both hard and multiple sets of soft jaws, and tailstock can be supplied as accessories/ Any associated tools can be discussed in case of purchase. The machine’s footprint is 2.8m x 5.2m, of which 2.8m already include 600mm as working space/ All manuals are available. Klsdpjx D Ibbjfx Ag Rsp Dimensions Machine depth: 3,250 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 22.491 h, kecepatan spindel (maks.): 1.800 rpm, jarak pergerakan sumbu X: 410 mm, daya motor spindle: 37.000 W, tinggi total: 1.930 mm, lebar total: 2.120 mm, berat keseluruhan: 5.500 kg, panjang produk (maks.): 4.250 mm, jumlah sumbu: 2, Horizontal lathe from 2008. The Weiler E70 / 2000 features a swing over bed of 720 mm and a maximum workpiece weight of 2,500 kg. It is equipped with a steady rest, tailstock, and faceplate, making it highly versatile for various machining tasks. With a spindle speed range of 1 to 1,800 rpm and a robust main drive power of 37 kW, this machine is engineered for precision. If you are looking for a high-quality lathe, consider the Weiler E70 / 2000 that we have available for sale. Contact us for further details. Kodpfx Aeyn Nxkog Rslp • Working area and capacities: • Swing over bed: 720 mm • Swing over cross slide: 430 mm • Centre height: 360 mm • Distance between centres: 1,000 / 2,000 / 3,000 / 4,000 / 6,000 mm • Bed width: 480 mm • Maximum workpiece weight (between centres): 2,500 kg • Maximum workpiece weight (with steady rest): 3,800 kg • Spindle and headstock: • Spindle bore (standard): 106 mm • Spindle bore (options): 128 / 165 / 216 / 262 / 317 mm • Spindle nose: DIN 55027 size 11 • Maximum spindle torque: 3,150 Nm • Feeds and travel: • Z-axis rapid traverse: 10,000 mm/min (10 m/min) • X-axis rapid traverse: 5,000 mm/min (5 m/min) • Feed force (Z): 20,000 N • Feed force (X): 10,000 N • Tailstock: • Quill diameter: 115 mm • Quill travel: 225 mm • Quill taper: MT 6 (Morse taper) • Thread cutting capabilities: • Metric threads: 0.1-400 mm • Whitworth threads: 1/4-56 TPI • Module threads: 0.125-28 mm • DP threads: 1-224 DP • Operating hours: 22,491 h Additional equipment • Steady rest • Tailstock • Faceplate

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, jam operasional: 9 h, This horizontal lathe was manufactured in 2009. It is a Weiler E 60x1000 with a spindle bore of 83 mm and a swing over bed of 640 mm. With a maximum torque of 1400 Nm and a speed range up to 2500 rpm, it is ideal for heavy-duty turning operations. Recently overhauled, with renewed bearings and guides, it ensures high precision. Take advantage of this opportunity to purchase the Weiler E 60x1000 horizontal lathe. Please contact us for further information about this machine. Additional equipment • Tailstock quill diameter: 100 mm / Tailstock quill travel: 200 mm / Tailstock quill taper: Mk.5 Kodex D Ry Hspfx Ag Relp Machine benefits Technical advantages of the machine • Distance between centers: 1000 mm / Center height: 320 mm / Swing over bed: 640 mm / Swing over cross slide: 405 mm • Cross slide travel: 380 mm / Bed saddle guide length: 570 mm • Spindle nose as per DIN 55025, size 8 / Spindle bore: 83 mm / Main spindle taper: Metric 90 • Drive power at 60%/100% duty cycle: 20.5 / 17 kW / Max. spindle torque: 1400 Nm / Gearbox speed range, stage 1: 0–800 rpm / Gearbox speed range, stage 2: 0–2500 rpm • Overhaul works include hardening and grinding the bed guides, grinding the tailstock guides, as well as overhauling the bed and cross slide assembly. • Renewed and replaced components include: sliding surfaces, gib strips, all wipers, belts, main spindle motor, safety devices, rotary switches, and lubrication system. • Weiler cycle control: 840D/SL1 • Toolholder according to customer preference: Multifix size C or Parat size 3 Additional information Machine overhauled in 2022 Cycle-controlled Optional: A used 200 mm 3-jaw chuck can be supplied. A steady rest with 1 m center distance is not included, but can be sourced from the manufacturer at any time. As stated in your description, we offer our customers the choice between two different tool systems: Multifix size C or Parat size 3. These are completely rebuilt, which is why no toolholders are included.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, daya motor spindle: 45.000 W, tinggi total: 2.120 mm, berat keseluruhan: 11.500 kg, produsen pengendali: SIEMENS, model controller: 810 D, panjang produk (maks.): 5.400 mm, jumlah sumbu: 2, This Weiler E120x3000 was manufactured in 2001. It features a center distance of 3000 mm, a center height of 600 mm, and a swing diameter over bed of 1200 mm. The spindle bore is 165 mm, and it is equipped with a robust main drive rated at 45/37 kW. This machine is ideally suited for heavy-duty turning work and comes with accessories such as a chuck, a faceplate, and a steady rest. Contact us for further information about this machine. • Working area: • Distance between centers: 3000 mm • Center height: 600 mm • Swing diameter over bed: 1200 mm • Swing diameter over cross slide: 830 mm • Cross slide travel: 590 mm • Bed carriage guide length: 860 mm • Turning tool cross-section (H x W): 40 x 40 mm • Tool holder: Parat size 4 • Spindle: • Spindle nose DIN 55027 / 55026, size 15 • Spindle bore: 165 mm • Main spindle taper: metric 171 • Main drive: • Drive power (60% / 100% duty cycle): 45 / 37 kW • Max. spindle torque: 8000 Nm • Speed range gearbox stage 1: 1-280 rpm • Speed range gearbox stage 2: 4-900 rpm • Tailstock: • Quill diameter: 140 mm • Quill stroke: 300 mm • Quill taper: MK 6 • Dimensions and weight of the machine: • Overall length: 5400 mm (without chip conveyor), 6535 mm (with chip conveyor) • Overall width: 2600 mm • Overall height: 2120 mm • Machine weight: 11,500 kg • Overhaul Work Performed: • Hardening and grinding of all bedways • Grinding of tailstock ways • Overhaul of the complete bed and cross slide assembly (grinding/scraping of all guides) • Renewal of bed carriage slideways • Renewal or shimming of keyways and ground guides • Replacement of all wipers • Replacement of all belts • Overhaul of the main spindle assembly in the headstock • Renewal of the X-axis including bearings • Renewal of the Z-axis including bearings • Overhaul of the tailstock quill (regrinding MK 6 taper), replacement of spindle and nut Kjdpfxsx D Hz Ts Ag Rslp • Adjustment of the tool system • Replacement of the main spindle motor • Inspection of auxiliary motors (X and Z axis) • Refurbishment of existing safety guards (sliding hood/chuck guard) • Replacement of all rotary, cam, and limit switches • Replacement of spindle and handwheel encoders • Renewal of flexible cables and coolant hoses in the working area • Replacement of centralized lubrication system • Renewal of energy chains • Painting as specified (standard structural basalt and light gray) • Assembly and geometric inspection of the machine according to DIN 8605 Additional Equipment • 1x used 630 mm diameter chuck with various jaws • 1x used 1100 mm diameter faceplate • 1x used steady rest, max. 300 mm diameter • 1x used chip conveyor

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 1987, Fungsionalitas: tidak berfungsi, Kerusakan: Hubungan pendek pada papan kontrol motor (lihat layar) Ø maks. putar di atas tempat tidur: 280 mm Ø maks. putar di atas dudukan pelana: 140 mm Jarak gerak: Z= 350, X= 230 mm Lubang spindle: 41 mm Kodpfx Agsyrqwie Rslp Maks. lubang spindle: 41 mm Pemegang alat: Baruffaldi 4 posisi Tailstock Dimensi PxLxT: 2600 x 2000 x 1900 mm Berat: 1.500 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Drehdurchmesser 410/ 440 mm Drehlänge 950 mm Steuerung Siemens / Weiler D2 Werkstückgewicht max 900 kg Spindelkopf Gr 6 MK 6 Spindelbohrung 54 mm Planhub 230 Pinolen-Durchmesser MK 4 mm Pinolenhub 120 mm Spitzenhöhe 200 mm Gewindesteigung max. in mm 0,1 - 250 mm Spindeldrehzahlen - stufenlos 1 - 3000 U/min Gesamtleistungsbedarf 12 kW Maschinengewicht ca. 2,1 t Raumbedarf ca. 2,3 x 1,5 x 1,8 m Klsdpfx Ageyrh Aps Rop

Kondisi: siap digunakan (bekas), WEILER Condor VS 2 dari universitas (laboratorium percobaan) - Panduan "seperti baru" - Ketinggian pusat: 165 mm - Diameter putar di atas ranjang: 330 mm - Jarak antara puncak: 800 mm - Rentang kecepatan putar: 28–2800 rpm - Feed otomatis longitudinal / bidang - Lubang spindle: 40 mm - Ulir / metrik / inci dll. - Collet – perangkat pengencang cepat inkl. collet - Chuck empat rahang Röhm - Pelat faceplate Kjdpfxsyu Hl Ie Ag Rslp - Pelindung chuck - Multifix dengan insert - Tombol darurat / mati - Dokumentasi Dimensi: PxLxT 2x0,8x1,6 meter / Berat 900 kg Kesalahan penulisan/data dapat terjadi.

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Mesin Bubut CNC Weiler DZ 45 Tahun pembuatan: 2008 Kontrol: Siemens 840D / Shopturn Pengisian manual hingga Ø 220 mm Lubang bahan: 42 mm Panjang pembubutan maks.: 450 mm Putaran spindle: 6300 rpm Pemrosesan Kledpfx Ajyayc Deg Rsp Menara alat dengan 16 alat penggerak Sumbu X/Z/Y / C Chuck collet

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VC Kecepatan variabel stepless 25 - 2000 dengan tampilan RPM digital Digital 3 sumbu Area pembubutan 280 x 500 mm Lubang spindle 36 mm Tailstock MK 3 Chuck 3 + 4 rahang Röhm 160 mm Chuck bor cepat, live center Klodpjyuqb Tofx Ag Rjp Perangkat collet lengkap dengan collet Multifix A dengan 4 dudukan alat Pelindung chuck dengan pemantauan listrik, tombol darurat Kondisi: sangat baik, operasi halus dan rel berjalan sempurna Tes putaran 100 mm mengambang, akurasi 0,015 mm Dimensi: P 1,45 m, T 1,25 m, L 0,65 m Berat: sekitar 650 kg Dapat diuji dengan listrik Bebas muat di D - 88433 Schemmerhofen.

Kondisi: sangat baik (bekas), Swing diameter over bed 410 mm Centre distance 1,000 mm Spindle speeds 4–3,000 rpm Control: WEILER Various accessories Kledpfsk D S Rqsx Ag Rop MARCELS MASCHINEN CH

Kondisi: bekas, Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 573, diameter putar di atas sled silang: 340 mm, lubang spindel: 66 mm, panjang pembubutan: 1.100 mm, lebar di tengah: 1.000 mm, diameter pembubutan di atas alas geser: 570 mm, diameter ayun di atas peluncur silang: 340 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, jarak gerak quill: 200 mm, tinggi pusat: 280 mm, gerak cepat sumbu X: 10 m/menit, pergerakan cepat sumbu Z: 10 m/menit, lebar tempat tidur: 350 mm, panjang total: 2.850 mm, lebar total: 1.815 mm, tinggi total: 1.750 mm, berat benda kerja (maks.): 250 kg, daya motor spindle: 15.000 W, berat keseluruhan: 3.050 kg, kecepatan rotasi (min.): 1 rpm, kecepatan rotasi (maks.): 2.500 rpm, torsi: 1.600 Nm, jarak pergerakan sumbu X: 340 mm, jarak gerak sumbu Z: 1.100 mm, berat benda kerja di antara senter: 1.600.000 g, diameter spindel: 100 mm, Diameter putar pada celah: 600 mm, diameter luar chuck: 315 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Weiler E50 adalah mesin bubut presisi konvensional berkualitas tinggi dari produsen Jerman, Weiler. Mesin ini sering digunakan di pabrik pembuatan alat, teknik mesin, pusat pelatihan, serta untuk reparasi dan pembuatan suku cadang satuan. Mesin ini ditandai dengan konstruksi cor yang sangat kokoh, pemandu yang presisi, dan akurasi putaran yang tinggi. Berkat spindle utama yang bertenaga dan desain yang stabil, mesin ini cocok untuk pekerjaan finishing presisi maupun pemesinan berat. Kodpfx Aoyua Shjg Rolp Kendali siklus Harga yang tertera belum termasuk biaya pembongkaran, pengepakan, dan pengiriman. Penjualan dari lokasi, penjualan antara dapat terjadi. Mesin dijual dalam kondisi bekas; segala bentuk garansi dan jaminan dikecualikan.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, P E N A W A R A N 1 Mesin Bubut Kontrol Siklus Merek: Weiler Model: E 50 x 2000 Tahun Pembuatan: 2008 Kontrol: Siemens Panjang Pembubutan: 2000 mm Diameter ayun di atas tempat tidur: 570 mm Kljdpoyrqclofx Ag Rsp Diameter ayun di atas eretan atas: 340 mm Rentang kecepatan putar: 1 - 2500 rpm

Kondisi: baik (bekas), Tahun pembuatan: 2000, 10623 Kjdpfx Asym Nf Uog Rolp

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, diameter pembubutan: 300 mm, tinggi pusat: 150 mm, berat keseluruhan: 800 kg, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Mengajukan penawaran berarti wajib melakukan pengambilan tepat waktu, baik antara 11.05.2026 hingga 13.05.2026 atau antara 18.05.2026 hingga 21.05.2026! RINCIAN TEKNIS Diameter pembubutan di atas ranjang: 300 mm Diameter pembubutan di atas support: 200 mm Tinggi center di atas ranjang: 150 mm Tinggi center di atas support: 100 mm Panjang center: 500 mm Lubang spindle: sekitar 28 mm RINCIAN MESIN Dimensi & berat Klsdpsym N A Hefx Ag Rop Dimensi (P x L x T): 1.400 x 700 x 1.600 mm Berat: 800 kg PERLENGKAPAN Pemegang pahat Multifix Chuck empat jaw (Ø 130 mm) Display digital dari produsen HEIDENHAIN Referensi eksternal: Mahle

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 300 mm, tinggi pusat: 150 mm, kecepatan spindel (maks.): 2.800 rpm, berat keseluruhan: 1.030 kg, 1 Ksdoym N Aaopfx Ag Rjlp

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 340 mm, tinggi pusat: 170 mm, kecepatan spindel (maks.): 2.800 rpm, berat keseluruhan: 800 kg, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Penawaran bersifat mengikat dan mewajibkan pengambilan tepat waktu, yaitu antara 11.05.2026 dan 13.05.2026 atau antara 18.05.2026 dan 21.05.2026! DETAIL TEKNIS Diameter putar di atas tempat tidur: 340 mm Kodpfoym Nz Nox Ag Rjlp Tinggi pusat di atas dudukan: 100 mm Diameter putar di atas dudukan: sekitar 200 mm Panjang antar senter: 750 mm Tinggi pusat di atas tempat tidur: 170 mm Kecepatan spindel: 12 – 2.800 rpm Lubang spindel: sekitar 38 mm DETAIL MESIN Tegangan operasi: 380 V Tegangan kontrol: 220 V Daya terpasang: 3 kW Arus nominal: 6,25 A Frekuensi: 50 Hz Dimensi & Berat Dimensi (P x L x T): 1.700 x 650 x 1.500 mm Berat: 800 kg PERLENGKAPAN Tailstock Pemegang pahat Multifix Chuck tiga rahang RÖHM (Ø 160 mm) Referensi eksternal: Mahle

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor B – Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout, from Training Workshop Technical Data: >> Year of manufacture: 1991 Machine no.: 91-1624 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock Kjdsym Srqspfx Ag Rolp >> Tailstock: MK 3 >> Feeds: 0.015 to 0.46 mm/rev >> Capable of cutting metric, inch, module, and diametral pitch threads >> Metric thread pitches: 0.18 to 28 mm >> Spindle brake >> Weight: approx. 1100 kg >> Spindle brake engageable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories & Equipment: >> 3-axis Heidenhain digital readout >> 1 pcs 3-jaw wedge-type scroll chuck with 1 set of jaws >> Toolholder with 7 tool pockets >> Bed stop >> Machine feet >> Drill chuck >> Live centre >> Coolant system About the machine: Offered for sale is a used Weiler Condor B lathe, year 1991, in very good condition. The machine is, of course, fully functional; a very robust and high-performance machine. The Weiler comes from a training workshop and is very well maintained. The 3-axis Heidenhain digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very operator-friendly. Take the opportunity to view and test the machine under power at our facility.