Lathe

Weiler Matador VS2

Kondisi: siap digunakan (bekas), de-hu-001 Dkedpfexq Hhyex Aavjw

Kondisi: siap digunakan (bekas), WEILER Matador VS 2, termasuk layar digital tiga sumbu yang baru dari operasi pelatihan - Tinggi senter 140 mm - Jarak antar senter 500 mm - Kecepatan spindel 15 - 3550 RPM - Umpan otomatis untuk gerakan memanjang dan melintang - Ulir / Metrik / Inci, dll. - Layar digital tiga sumbu yang baru - Pelindung chuck elektrik - Lampu kerja - Dudukan dasar Multifix dengan sisipan - Sistem pendingin - Chuck tiga rahang / chuck batang baji Dkjdpszr Rnyofx Aavsw - Senter tetap MK 3 - Berbagai perkakas - Dokumentasi Dimensi: PxLxT 1,5 x 0,6 x 1,5 meter / Berat 680 kg Kesalahan dan perubahan dapat terjadi.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 lead and feed screw lathe with 3-axis digital readout Heidenhain ND 780 from training workshop!! Technical Specifications: >> Machine No. 7702, year of manufacture approx. 1990 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: 15 – 3550 rpm >> Spindle bore: 36 mm Dkedpoy T Hqcsfx Aavsw >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and Equipment: >> 3-axis digital readout Heidenhain ND 780 >> Quick-clamping device, internal and external collets (see picture) >> 1 pc 3-jaw chuck, 3 sets of jaws >> Multifix size A with 3 tool holders >> Spindle guard >> 1 pc bed stop >> Change gears >> Machine feet About the machine: For sale is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The Weiler also runs quietly at high spindle speeds. The original location of the lathe was a training workshop. The machine comes with extensive accessories. Take advantage of the opportunity to view and test the machine under power on site to confirm its excellent condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 leadscrew and feedscrew lathe with 3-axis Elesta digital readout, from a training workshop! Technical specifications: >> Machine serial no.: 88-8115, Year of manufacture: 1988 >> Center height: 140 mm >> Center distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short-taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Threads possible: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight: approx. 700 kg >> Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Dkedpfx Aey Tmkvjavjw Accessories and equipment: >> 3-axis digital readout from Elesta >> Quick-change collet chucking system for internal and external collets (see picture) >> 1 pc. three-jaw chuck with 1 set of jaws >> Multifix size A with 3 tool holders >> Spindle guard >> 1 pc. bed stop >> Change gears >> Travelling steady >> Machine mounts/feet About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The Weiler also runs quietly at high speeds. The original location of the machine was a training workshop. The machine comes with an extensive range of accessories. Take the opportunity to inspect the machine under power on site and see its excellent condition for yourself.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout from K&C, in Special Light Grey Paint!! Technical Data: Djdpsyyb T Sofx Aavjkw >> Machine No. 92-028, Year of Manufacture 1992 >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Spindle Speed: 15 – 3550 rpm >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with Bayonet Lock >> Tailstock Morse Taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Features: >> 3-axis digital readout by K&C, NEW, 12-month manufacturer's warranty including operating manual Features: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter, quick zeroing, counting direction switching >> 1 pc. 3-jaw chuck, 1 set of jaws >> 1 pc. 4-jaw chuck, 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout from K&C has been retrofitted. All scales are new and equipped with protective covers to shield them from dirt. All carriage movements are smooth and uniform. Take the opportunity to inspect this machine under power on-site and verify its condition for yourself.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C, NEW, in Special Light Grey Paint Finish!!! Technical Specifications: >> Machine No. 92-029, Year of Manufacture: 1992 >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Spindle Speed: 15 – 3550 rpm >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock Morse Taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch threads possible >> Metric thread pitches: 0.25 to 12 mm >> Weight approx. 700 kg >> Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty with user manual Functions: mm/inch switching, ABS/INC coordinate selection, value halving, reference mark, 200-tool programming, taper calculation, radius/diameter mode, quick zeroing, count direction switching >> 1 three-jaw chuck (1 set of jaws) >> 1 four-jaw chuck (2 sets of jaws) Dkjdpsyylqhofx Aavjw >> Electronic spindle guard >> Multifix Size A quick-change toolpost with 2 tool holders >> Motor brake >> Bed stop About the Machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly repainted in light grey. A very well-presented machine. The K&C 3-axis digital readout was retrofitted. All scales are new and equipped with protective covers to guard against dirt. The slides run smoothly and evenly. Take the opportunity to view this machine under power on site and see its condition for yourself.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C, NEW, in Special Light Grey Paintwork!!! Technical Data: >> Machine No. 92-027, Year of Manufacture: 1992 >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Speed: 15 – 3550 rpm >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock: MT 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories & Equipment: >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty, with operating manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool memory for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 toolholders >> Motor brake >> Bed stop Dksdpfx Aaoyylq Usvsw About the Machine: This Weiler Matador VS-2 is offered in excellent condition. The machine is, of course, fully functional and has been newly repainted in light grey. It is a very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All linear scales are new and are equipped with protective covers to prevent contamination. All slides move smoothly and evenly. You are welcome to inspect the machine under power at our premises to verify its condition.