Beli Weiler E 35 bekas (195)

Kondisi: bekas, Mesin bubut presisi dengan sistem otomatisasi siklus untuk pemesinan poros dan chuck, teknologi penggerak digital (Sinamics S120), dan kontrol Siemens Sinumerik 840D sl dengan perangkat lunak WEILER SL2 yang berorientasi pada pengguna. Jarak antar ujung 2000 mm, diameter ayunan di atas alas 570 mm, lubang spindel 83 mm, penggerak utama 20/17 kW hingga 2500 rpm. Tahun pembuatan 2022. Cjdpfjzl Ipnex Anzohb

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor 81, lead and feed screw lathe with 3-axis digital readout from K&C, NEW Geometrically overhauled with acceptance protocol covering new machine tolerances Technical Data: >> Machine No. 84-121 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027 size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Features: >> 3-axis digital readout by K&C, new, 12 months manufacturer warranty, with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter mode, quick zeroing, direction reversal >> Collet chuck new, collets new from 3 to 26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix size B, new, with 3 toolholders >> Bed stop >> Electrical chuck guard, new >> Rear chip guard >> Operators manual >> Coolant system >> Machine levelling pads Chjdpfewrm Dtox Anzeb About the Machine: Offered is a Weiler Condor 81 lead and feed screw lathe in excellent, geometrically overhauled condition. The bedways have been reground and/or hand-scraped as new. Delivery with inspection protocol. Accessories such as collets and chuck are new. Safety features: The machine is equipped with a braking motor, electronic spindle guard, and two emergency stop switches – making it an as-new condition lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like finish surfaces to be produced. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Display K&C, Fully Refurbished with Inspection Report for New Machine Tolerances Technical Data: >> Machine No. 1824 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Morse Taper 4 >> Feeds: 0.026 to 0.888 mm/rev >> Thread Types: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Switchable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Equipment and Accessories: >> K&C 3-Axis Digital Readout, new, with 12-month manufacturer’s warranty and user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> 200 mm wedge bar 3-jaw chuck, as new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet Chedpfx Anovrcqdjzob >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: Covers for lead and feed screws About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. Guides have been newly ground or hand-scraped. Acceptance with inspection protocol. 2K white gloss paintwork. Accessories (Multifix and chuck) are new. Safety features: The machine has a brake motor, electronic spindle protection, and two emergency stop switches—an absolutely as-new condition lathe. Even at high speeds, the Weiler runs extremely smoothly. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. You are welcome to view and test the machine under power on site to verify its condition.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, kecepatan spindel (maks.): 2.500 rpm, jarak pergerakan sumbu X: 340 mm, jarak gerak sumbu Z: 1.100 mm, berat keseluruhan: 3.800 kg, jumlah sumbu: 2, Horizontal lathe from 2007. This WEILER E55X1000 features a maximum turning diameter of 315 mm and a distance between centers of 1100 / 2100 mm. It is equipped with a Sauter 8-station tool system and a spindle speed range of 1–2500 rpm. If you are seeking a high-quality lathe, you should consider the WEILER E55X1000 we have for sale. Please contact us for further details regarding this machine. • Internal taper: Metric 90 • Spindle diameter in front bearing: 120 mm • Spindle bore: 83 mm Csdsy Em A Aepfx Anzshb • Flange diameter: 500 mm • Max. turning diameter: 315 mm • Max. torque: 1600 Nm • Tool system: Sauter 8-station turret • Number of tool stations: 8 • Tool shank size: 32 x 25 mm • Turret interface: Capto C4 • Number of cross slides: 1 • Centre distance: 1100 / 2100 mm • Turning length: 340 mm • Tailstock taper: MT 5 • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Max. tailstock travel: 1000 / 2000 mm • Continuous speed (S1): Gear stage I: 89 rpm / Gear stage II: 355 rpm • Emission level: 80 dB(A) • Operating voltage: 400 V • Control voltage: DC 24 V • Connected load: 30 kVA • Rated current: 43 A • Frequency: 50 Hz • Main fuses: 50 A • Condition note: The ball screw in the Z-axis generates some noise, but dimensional accuracy is not affected. Additional equipment • Extraction system Technical Specification Counter spindle: No Driven tools: No

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: belum diuji, nomor mesin/kendaraan: HK06, lubang spindel: 48 mm, panjang total: 1.600 mm, lebar total: 900 mm, tinggi total: 1.600 mm, kecepatan spindel (maks.): 2.500 rpm, kecepatan spindel (min.): 48 rpm, berat keseluruhan: 800 kg, tegangan masuk: 400 V, frekuensi input: 50 Hz, arus masuk: 7 A, MESIN BUBUT WEILER PRAKTIKANT GS, MESIN BUBUT DENGAN PENGGERAK DAN ULIR PENGATUR Chsdpjzxzmyofx Anzsb - Daya: 5,5 kVA - Panjang antara senter: sekitar 700 mm - Tinggi senter di atas meja: 160 mm - Diameter pembubutan di atas meja: 320 mm - Tinggi senter di atas penopang: sekitar 100 mm - Diameter pembubutan di atas penopang: sekitar 200 mm Mesin ini dilengkapi dengan kepala tetap, dudukan pahat bubut Multifix, dan chuck cepat, termasuk tampilan digital tiga sumbu dari produsen FAGOR. FCA D-72589 Westerheim - dimuat di atas truk.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 40 mm, tinggi pusat: 165 mm, lebar di tengah: 750 mm, Dear Sir or Madam, We are offering for sale a Weiler Condor B lathe. This model is particularly notable for its user-friendly operation and an excellent ratio of footprint to center height/center distance. The Condor B is positioned in size between the Weiler Praktikant and the Weiler Commodor, making it a true all-rounder in any workshop. The machine undergoes a comprehensive partial overhaul in our workshop, ensuring both excellent technical condition and visual appearance. All guideways are in good order, the gearboxes run quietly, and the levers operate smoothly. You are welcome to inspect the machine on site to verify its condition. Availability: On request Centre height: 165mm Centre distance: 750mm Spindle bore: Ø 40mm Cjdpfx Aow N Np Ssnzehb Tailstock taper: MT3 Chuck mounting: Short taper DIN55027 size 5 with bayonet lock Quill travel: 85mm Spindle speeds: 22-2800 rpm Possible thread types: Metric, Whitworth, Module, Diametral Pitch Metric thread pitches: 0.18 - 28mm Spindle brake: switchable Voltage: 400V Dimensions: approx. 1.80x1.30x0.9m (LxHxW) Weight: approx. 1100kg Additional features and accessories: 3-axis digital readout K+C (NEW), chuck guard (NEW), coolant system, 2x emergency stop, leadscrew and feed shaft cover (optional), operating manual, and much more available upon request… Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are at least workshop-inspected - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can fully or partially overhaul the selected machine - Upon request, we can repaint the selected machine in your desired color - Upon request, you can order additional accessories such as tools - Upon request, we can fit additional accessories such as safety devices - We are happy to arrange shipping and/or installation

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, kecepatan spindel (maks.): 2.500 rpm, tinggi total: 1.785 mm, berat keseluruhan: 3.850 kg, jumlah sumbu: 2, Mesin Weiler E50 ini diproduksi pada tahun 2009. Ini adalah mesin bubut horizontal yang kokoh dengan diameter ayun di atas alas sebesar 570 mm dan lubang spindel sebesar 83 mm. Mesin ini menawarkan lebar alas sebesar 350 mm dan penampang alat potong sebesar 32 x 25 mm. Ideal untuk pekerjaan pembubutan yang presisi dan efisien. Hubungi kami untuk informasi lebih lanjut tentang mesin ini. Keunggulan Mesin Keunggulan Kualitas Mesin • Diameter spindel pada bantalan depan: 120 mm • Lubang spindel: 83 mm • Tirus bagian dalam spindel utama: metrik 90 • Rentang umpan dalam arah longitudinal dan transversal: 0–20 mm/putaran • Gaya umpan dalam arah longitudinal: 10.000 N • Gaya umpan dalam bidang: 7.000 N • Kecepatan input dalam arah longitudinal/transversal: 10/7 m/menit atau 5/3,5 m/menit • Ulir metrik: 0,1–400 mm • Ulir inci: 1/4" – 56 g/1" • Ulir modul: 0,125 – 28 Keunggulan Teknis Mesin • Daya penggerak (60 % / 100 % daya nominal): 20/17 kW • Torsi maksimum pada spindel: 1600 N·m • Tingkat gigi I: 1–625 min⁻¹ • Tingkat gigi II: 4–2500 min⁻¹ • Lebar alas: 350 mm • Diameter spindel: 80 mm • Langkah selongsong: 200 mm Codpfx Aeznz Txjnzehb • Tirus bagian dalam spindel senter: mk 5 • Penampang alat potong (tinggi/lebar): 32 × 25 mm • Kepala spindel sesuai DIN 55027: Ukuran 8 Informasi Tambahan • Mesin masih beroperasi • Sejak pembelian, mesin ini telah dioperasikan secara andal dalam satu shift • Luas area pemasangan mesin adalah 2,8 m x 5,2 m, di mana 600 mm sudah termasuk dalam 2,8 m sebagai area kerja • Semua buku manual tersedia Peralatan Tambahan (dengan biaya tambahan): • Cekam, termasuk rahang keras dan beberapa set rahang lunak • Senter • Alat • Penopang Dimensi Kedalaman Mesin: 3250 mm

Kondisi: baik (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 185 mm, lubang spindel: 40 mm, kecepatan spindel (maks.): 2.800 rpm, tinggi total: 1.290 mm, panjang total: 1.850 mm, lebar total: 880 mm, diameter pembubutan di atas alas geser: 330 mm, jenis arus masuk: tiga fasa, berat keseluruhan: 1.150 kg, penjepit spindle: MK 5, Mesin bubut konvensional Weiler dalam kondisi baik! Csdjzx Uqljpfx Anzjhb Tahun pembuatan 1996. Termasuk dengan chuck collet!

Kondisi: siap digunakan (bekas), Mesin Bubut L&Z WEILER LZ 330 termasuk indikator digital 3-sumbu baru (bekas institusi pendidikan) - Indikator digital 3-sumbu "BARU" - Ketinggian puncak 165mm - Diameter pembubutan di atas tempat tidur 330mm - Panjang pembubutan 800mm - Rentang putaran (girboks) 25-2800 rpm - Otomatis pakan membujur/muka - Dudukan dasar Multifix baru dengan sisipan - Chuck tiga rahang - Perlengkapan collet dengan 20x collet - Perangkat pemotong salinan asli - Berbagai perlengkapan tambahan - Dokumentasi Dimensi: P x L x T 1,8 x 0,7 x 1,6 meter / Berat 800 kg Chedoy Id Uhepfx Anzsb Kesalahan dan kekeliruan input dapat terjadi.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant 160B Precision Centre Lathe with 3-Axis K&C Digital Readout, NEW. Overhauled, including acceptance protocol certifying new-machine tolerances. Technical Specifications: >> Machine No.: 87 160 760 Chsdpfxsvrdlcj Anzjb >> Centre height: 160 mm >> Distance between centres: 650 mm >> Spindle speeds: 24 to 2,500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5, with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Electrically selectable spindle brake >> Dimensions (LxHxW): 1.6 m x 1.25 m x 0.7 m Equipment & Accessories: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty, incl. operation manual Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, selectable count direction >> New collet chuck, NEW collets 3–25 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix tool post size A, with 3 steel holders >> Electronic spindle guard >> NEW LED machine lamp >> NEW machine mounts >> Splash guard >> Operating manual and spare parts plan (PDF) About the Machine: Offered is a Weiler Praktikant 160 B engine lathe with leadscrew and feedscrew, reconditioned to toolroom accuracy and fully geometrically overhauled, including an acceptance protocol confirming new-machine tolerances. Safety features: electronic spindle guard, covers for leadscrew and feedscrew, 2 emergency stop buttons, and a braking motor. This latest generation of Weiler lathes is highly user-friendly and enables ground-like surface finishes. Take the opportunity to inspect and test the machine under power onsite to verify its condition.

Kondisi: siap digunakan (bekas), Mesin Bubut L & Z WEILER MATATOR, termasuk tampilan digital Heidenhain ND 780 -Tinggi antara titik tengah sekitar 150mm -Diameter bubut di atas penyangga sekitar 160mm -Diameter bubut di atas landasan sekitar 300mm -Jarak antara titik tengah sekitar 500mm -Tampilan digital tiga sumbu / Heidenhain -Collet / sistem penjepitan cepat & berbagai jenis collet -Pelindung chuck -Pelindung serpihan -Penyangga dasar Multifix & sisipan -Lubang spindel 36mm -Rentang kecepatan putar 30 - 3500 RPM -Umpan otomatis untuk gerakan memanjang / melintang -Penyangga ekor MK 3 -Chuck tiga rahang -Dokumentasi Chjdpjzpba Uefx Anzob Dimensi: PxLxT 1,6x0,7x1,6 meter / Berat 600 Kg Kesalahan dan perubahan dapat terjadi.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, 1 x Mesin Bubut Mekanik Weiler RDU 260-80 Mesin dengan paket aksesori lengkap dalam kondisi baik Data teknis: - Lubang spindle: 38 mm - Kecepatan putar spindle: 125 - 2800 (kiri/kanan) - Tinggi pusat: 130 mm - Jarak antara pusat: 350 mm Perlengkapan: - Support lintang engkol dengan sistem quick-change Multifix A - Tailstock engkol MK 2 - Support lintang tuas tangan - Tailstock tuas tangan dengan collet tarik - Support pemotong - Support kepala revolver 6 posisi - Pengencangan collet dengan collet tarik - Sistem pendingin Aksesori: 65 x collet tarik 358 E C - 5 1 x collet tarik di tailstock 366 E (MK 2) 1 x quick-change holder Multifix A dengan 1 kaset Csdpfx Anjzczbyszehb 1 x chuck 3 jaw Röhm 140 mm Aksesori lain seperti collet pada tailstock atau alat untuk tailstock/kepala revolver tersedia dengan biaya tambahan. Mesin dapat diuji dalam keadaan terhubung listrik.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Lunette tetap untuk mesin bubut WEILER E40 dan E50 dalam kondisi sangat baik. Harga lunette E40: €2.500 Csdpfstx Avkjx Anzehb Harga lunette E50: €2.850 Rentang penjepitan: 10 - 150 mm.

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 40 mm, tinggi pusat: 160 mm, lebar di tengah: 650 mm, Dear Sir or Madam, For sale is a Weiler Praktikant 160B lathe equipped with a brand new 3-axis digital readout from K+C (including a 12-month manufacturer's warranty). The machine has been extensively partially overhauled in our workshop, ensuring it is in excellent technical and visual condition. All guideways are in good order, the gearboxes run quietly, and the levers switch smoothly. You are welcome to inspect the machine on site to verify its condition. Availability: on request Centre height: 160 mm Distance between centres: 650 mm Spindle bore: Ø 40 mm Tailstock taper: MT3 Quill travel: 85 mm Longitudinal carriage feed range: 0.020 – 0.630 mm/rev Cross slide feed range: 0.006 – 0.200 mm/rev Possible thread types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: switchable Total connected load: 7.5 kVA Voltage: 400 V Dimensions (approx.): 1.58 x 0.9 x 1.5 m (L x H x W) Weight (approx.): 720 kg Cjdowhzdmepfx Anzjhb Additional features and accessories: NEW 3-axis digital readout, coolant system, chuck guard, leadscrew and feed shaft cover, 2x emergency stop, operating manual, and many more options available on request... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines undergo thorough inspection - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can perform a complete or partial overhaul of your selected machine - Upon request, we can repaint your selected machine in your desired color - Additional accessories such as tools, etc. can be ordered together if required - If requested, we can install accessories such as safety devices for you - We are happy to arrange shipping and/or delivery

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 160 mm, lebar di tengah: 650 mm, kecepatan rotasi (maks.): 4.000 rpm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Dear Sir or Madam, For sale is a Weiler Primus VC / Praktikant VC lathe. This model series is distinguished by the Siemens control panel and fully stepless speed regulation. As the designation suggests, the VC is capable of operating with constant cutting speed. In our workshop, the machine undergoes extensive partial refurbishment to ensure it is in excellent technical and visual condition. All slideways are in good order, the gearboxes run smoothly and quietly, and all levers are easy to operate. You are welcome to visit us on-site to inspect the condition for yourself. Availability: on request Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Tailstock taper: MT3 Quill stroke: 85 mm Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.60 x 1.00 x 1.50 m (L x H x W) Weight: approx. 750 kg Further equipment and accessories: Siemens control panel, coolant system, chuck guard, leadscrew and feed shaft cover, 2x emergency stop, operating manual, EC Declaration of Conformity, and much more on request... Our service promise to you: - We are a certified Master Workshop specialising in mechanical engineering - All machines undergo at least a workshop inspection - All lubricants and any worn parts are replaced in advance Codpfx Answhx I Nozohb - Upon request, we can completely or partially overhaul your chosen machine - Upon request, we can repaint your chosen machine in your preferred colour - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety equipment - We are happy to arrange shipping and/or on-site installation

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 83 mm, diameter pembubutan: 570 mm, diameter ayun di atas peluncur silang: 340 mm, tinggi pusat: 280 mm, kecepatan spindel (maks.): 2.500 rpm, Mesin ini, karena konstruksi yang kokoh, cocok untuk pekerjaan bubut berat dan produksi seri! DETAIL TEKNIS Rentang kecepatan putar: 1 – 2.500 rpm Torsi: 1.300 – 1.600 Nm Diameter ayun di atas tempat tidur: 570 mm Diameter ayun di atas carriage: 340 mm Tinggi pusat: 280 mm Jarak antara pusat: 2.000 mm Lubang spindle: 83 mm (opsional 128 / 165 mm) Jumlah posisi pada turret alat: 8 Kopling turret alat: VDI 40-shank Diameter pinol senter: 80 mm Kerucut dalam senter: MK5 DETAIL MESIN Model kontrol: WEILER SIEMENS 810D Daya motor utama: 20 / 17 kW (60% / 100% duty cycle) Chjdpfeymx N Nex Anzsb Dimensi & Berat Dimensi (P x L x T): 3.850 mm × 1.850 mm × 1.750 mm Berat mesin: 4.200 kg

Kondisi: bekas, Swing diameter over bed / mm Swing diameter over cross slide / mm Turning length / mm Chjdpfx Aowgi Tmonzjb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Länge:1200mm Chedox Tp Dxspfx Anzsb Breite:800mm Höhe:1200mm Gewicht:290kg

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 56 mm, tinggi pusat: 180 mm, lebar di tengah: 1.000 mm, Dear Sir or Madam, Chodpfx Aewhzivenzsb For sale is a Weiler Commodor B lathe equipped with a new 3-axis digital readout from K+C (including 12-month manufacturer warranty). The machine has undergone extensive partial refurbishment in our workshop, ensuring it is in excellent technical, geometric, and visual condition. You are welcome to inspect the machine on-site. Availability: on request Centre height: 180 mm Centre distance: 1,000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2,000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Additional features and accessories: New K+C 3-axis digital readout, coolant system, chuck guard, sliding chip tray, operating manual, and many other options available on request. Our service promise to you: - We are a certified master workshop specialising in mechanical engineering - All machines undergo at least a workshop inspection - All lubricants and any worn parts are replaced in advance - On request, we can fully or partially overhaul your selected machine - On request, we can repaint the machine in your desired colour - On request, you can order additional accessories such as tools - On request, we can install further accessories such as safety equipment - We are happy to organise shipping and/or installation for you

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 40 mm, tinggi pusat: 160 mm, lebar di tengah: 650 mm, gores kuas bulu: 85 mm, panjang total: 1.600 mm, lebar total: 900 mm, tinggi total: 1.500 mm, Dear Sir or Madam, For sale is a Weiler Praktikant 160B lathe with 3-axis digital readout. The machine has been extensively partially overhauled in our workshop and is therefore in excellent technical and visual condition. All guides are in good condition, the gears run smoothly, and the levers can be easily operated. You are welcome to visit us and inspect the machine's condition for yourself. Availability: on request Centre height: 160 mm Centre distance: 650 mm Chsdpfxsu H U S Ho Anzjb Spindle bore: Ø 40 mm Tailstock quill taper: MT3 Quill stroke: 85 mm Longitudinal feed range: 0.020 - 0.630 mm/rev Cross slide feed range: 0.006 - 0.200 mm/rev Thread types possible: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Total connected load: 7.5 kVA Voltage: 400 V Dimensions: approx. 1.58 x 0.9 x 1.5 m (L x H x W) Weight: approx. 720 kg Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, 3-jaw chuck, and further accessories available on request... Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced as a matter of course - Upon request, we can perform a full or partial overhaul of your selected machine - Upon request, we can repaint the selected machine in your preferred color - Upon request, you can order additional accessories such as tooling directly - Upon request, we can install further accessories such as safety devices - We are happy to arrange shipping and/or installation

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, kecepatan spindel (maks.): 4.000 rpm, jarak pergerakan sumbu X: 150 mm, jarak gerak sumbu Z: 500 mm, daya motor spindle: 4.000 W, tinggi total: 1.700 mm, lebar total: 890 mm, berat keseluruhan: 1.050 kg, Diameter batang (maks.): 43 mm, panjang produk (maks.): 1.570 mm, diameter benda kerja (maks.): 280 mm, jumlah slot dalam magazin alat: 4, jumlah sumbu: 2, Mesin bubut horizontal, tahun pembuatan 2018. Mesin Weiler PRIMUS VCD ini memiliki daya masukan 7,5 kVA dan beroperasi dengan arus nominal 15,5 A. Dengan berat mesin 1050 kg, mesin ini dirancang untuk kinerja yang tangguh. Jika Anda mencari kapasitas pembubutan berkualitas tinggi, Anda sebaiknya mempertimbangkan Weiler PRIMUS VCD yang kami tawarkan untuk dijual. Hubungi kami untuk detail lebih lanjut. • Jenis mesin: Mesin bubut senter • Panjang bubut / jarak antar senter: 500 mm • Diameter bubut di atas meja: 280 mm • Diameter bubut di atas eretan silang: 150 mm • Ukuran konus spindel (DIN 55027): Ukuran 5 • Diameter bantalan depan: 70 mm • Lubang spindel: 43 mm • Konus internal spindel utama: ME 50 • Daya penggerak (100% siklus kerja): 4 kW • Rentang kecepatan spindel: 30 – 4.000 RPM • Jumlah kecepatan umpan: 24 • Rentang umpan longitudinal: 0,02 – 0,63 mm/putaran • Rentang umpan transversal: 0,006 – 0,20 mm/putaran • Rentang ulir metrik: 0,25 – 8 mm • Rentang ulir inci: 80 – 2 TPI • Rentang ulir modulus: 0,25 – 4 Modul • Rentang ulir berdasarkan jarak diametral (DP): 200 – 5 DP • Diameter selongsong kepala tetap: 40 mm • Langkah selongsong kepala tetap: 85 mm • Konus kepala tetap: MT3 • Tegangan operasi: 400 V • Tegangan kontrol: 24 V DC • Daya masukan: 7,5 kVA • Arus nominal: 15,5 A • Frekuensi: 50 Hz • Sekering utama: 25 A Csdpfx Anszpwh Uozohb • Berat mesin: 1.050 kg • Dimensi mesin (P × L × T): 1.570 × 890 × 1.700 mm Peralatan tambahan • Pemegang perkakas penggantian cepat 4 arah PARAT ukuran 1, termasuk 1 × pemegang perkakas WD 1/12 • 2 × pemegang perkakas WD 1/12 • Cekam collet yang dioperasikan dengan tuas untuk 173 collet E • 13 × collet 173 E, rentang penjepitan: 3–15 mm (dengan interval 1 mm) • Cekam tetap dengan rahang rol, rentang penjepitan: 15–100 mm • Pelindung serpihan yang dapat dipindahkan dengan jendela penglihatan • 8 × elemen perata Spesifikasi Teknis Spindel Balik Tidak Perkakas yang Digerakkan Tidak

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jarak pergerakan sumbu X: 260 mm, jarak gerak sumbu Z: 1.000 mm, berat keseluruhan: 1.510 kg, jumlah sumbu: 2, Mesin bubut horizontal, tahun pembuatan 2016. Mesin Weiler DA 260 X 1000 ini memiliki konstruksi yang kokoh dengan berat 1.510 kg, yang menjamin stabilitas selama pengoperasian. Jika Anda mencari mesin dengan performa bubut berkualitas tinggi, pertimbangkan mesin Weiler DA 260 X 1000 yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. - Tegangan operasi: 400 V - Tegangan kontrol: 230 V AC / 24 V DC - Daya masukan: 11,5 kVA - Arus nominal: 15,5 A - Frekuensi: 50 Hz - Sekering utama: 32 A Spesifikasi Teknis Chjdpfx Anjzylt Tszjb Spindel tambahan: Tidak ada Alat yang digerakkan: Tidak ada

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Dikenakan pajak berdasarkan perbedaan sesuai dengan §25a Undang-Undang Pajak Pertambahan Nilai (PPN). Anda akan menerima faktur yang sah. Nomor Artikel Internal: 26057 Mesin bubut Weiler Matador + Dudukan dasar Multifix "A" + Chuck tiga rahang + Collet + Pompa pendingin Tinggi tengah sekitar 150mm Diameter bubut di atas dudukan 160mm Diameter bubut di atas alas sekitar 300mm Jarak antar ujung sekitar 500mm Lubang spindel sekitar 36mm Rentang kecepatan putar 30 - 3500 RPM Umpan otomatis untuk gerakan memanjang/melintang Tailstock MK3 Dimensi (P x L x T): 150 x 70 x 150cm Berat: 600Kg Chsdpjzx R R Isfx Anzsb Mesin ini berasal dari sebuah lembaga pendidikan dan dalam kondisi terawat dengan baik. Anda dipersilakan untuk memeriksa mesin dalam kondisi beroperasi di area penyimpanan berukuran lebih dari 500m² yang dipanaskan.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Mesin Bubut Paralel WEILER tipe PRAKTIKANT 160 B Jarak antar titik: 650 mm Diameter maksimum pada alas: Ø 320 mm Diameter maksimum di atas dudukan: Ø 192 mm Tinggi tengah: 160 mm Diameter spindel: Ø 40 mm Putaran: dari 48 hingga 2500 RPM Menara Multifix tipe A Cakram 3 rahang Ø 135 mm Tahun pembuatan: 1999 Motor spindel 2 kecepatan - 3kW Ulir: Metrik + Whitworth Ekor mesin CM3 Skala 2 sumbu MITUTOYO Dilengkapi dengan (lihat foto): 1 set sistem penjepit 1 cakram 4 rahang Ø 135 mm 7 dudukan alat MULTIFIX + berbagai alat Berbagai set penjepit Tegangan: 380 V Panjang: 1800 mm Lebar: 1100 mm Tinggi total (dengan lampu): 2100 mm Csdpfx Ajzwcn Nenzshb Berat: sekitar 900 KG

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1990, jam operasional: 51.392 h, tinggi total: 1.700 mm, berat keseluruhan: 1.300 kg, This Weiler E30 was manufactured in 1990. A robust centre lathe featuring a spindle bore of 42 mm and a swing over bed of 330 mm. It supports a wide range of thread cutting operations, from metric to DP threads, and comes equipped with a Multifix toolpost size B. Ideally suited for precise and versatile turning tasks. Please contact us for further information about this machine. Additional Equipment • Multifix toolpost size B mounted • Fixed steady rest (optional), clamping range: 15–100 mm • Travelling steady rest (optional), clamping range: 10–85 mm • Collets from 3 mm (in 0.5 mm increments) • Tailstock with a MK3 sleeve Machine Advantages Technical Machine Advantages • Drive power 100% / 60% duty cycle: 9/11 kW • Maximum spindle torque: 180 Nm • Total speed range: 1–4500 rpm • Feed drive: three-phase AC feed motors • Longitudinal feed range: 0–20 mm/rev • Rapid traverse longitudinal/cross: 10/7.5/5/3.5 m/min • Quill diameter: 50 mm • Quill stroke: 110 mm • Quill taper: MK 3 Additional Information Chodoyaimfepfx Anzeb Swing over cross slide: 160 mm Bed width: 240 mm Travel of cross slide: 180 mm Saddle slideway length: 395 mm Turning tool cross section (H x W): 20 x 20 mm Spindle nose according to DIN 55027, size 5 Spindle diameter at front bearing: 70 mm Main spindle taper: MK 5 Workpiece: Metric thread range: 0.1 – 400 mm Inch thread range: G/1" 1/4 – 56 Module thread range: mm DP thread range: 1–224 G/" Maximum number of threads: 50 Dimensions Machine depth: 1800 mm