Beli Weinig Conturex bekas (475)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
WEINIG
iklan kecil
Oberkochen
11.093 km
Empat sisi planer
WEINIGPowermat 400 CNC_Powerlock
Hubungi
Kondisi: bekas, Number of spindles: 6 pcs.
Working width: 230 mm
Planing height: 120 mm
Surfacing table length: 2500 mm
Feed motor: 4 kW
Feed speed: 5–30 m/min
Weinig Powermat 400 with HSK/Powerlock, CNC-controlled axial/radial adjustment
-----
Machine has been overhauled and function-tested!
Short summary:
-----
6 spindles with 8,000 rpm
5 x HSK/Powerlock
CNC-controlled axial and radial adjustment of the spindles via control system
CNC-controlled adjustment and positioning of the feed
Detailed description:
-----
Technical data:
Working width: 20–230 mm
Working height: 8–120 mm
Number of spindles: 6
Ndodpouzaa Sefx Ab Ejd
1. Tool holder – bottom
-----
Motor with brake: 5.5 kW
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool circle: 93–160 mm
Axial travel: 5 mm
Rabbetting device
Marathon coating for the table insert before the 1st lower tool holder
2. Tool holder – PowerLock – right
-----
Motor with brake: 11.0 kW
Shared motor with left tool holder
Speed incl. high-performance ball bearings: 8,000 rpm
Tool circle 40 mm below table level: 93–200 mm
Tool circle 55 mm below table level: 93–180 mm
Max. tool circle for straight knife heads: 163 mm
Max. tool diameter behind fence line: 180 mm
Max. profiling depth: 35 mm
Axial travel: 55 mm
Spindle CNC-controlled axially and radially
3. Tool holder – PowerLock – left
-----
Motor with brake: shared motor with 2nd spindle
Speed incl. high-performance ball bearings: 8,000 rpm
Tool circle 40 mm below table level: 93–200 mm
Tool circle 55 mm below table level: 93–180 mm
Max. tool circle for straight knife heads: 163 mm
Max. profiling depth: 35 mm
Axial travel: 55 mm
Spindle CNC-controlled axially and radially
4. Tool holder – PowerLock – top
-----
Motor with brake: 7.5 kW
Speed incl. high-performance ball bearings: 8,000 rpm
Tool circle: 93–200 mm
Max. tool circle for straight knife heads: 180 mm
Max. profiling depth: 35 mm
Axial travel: 40 mm
Split pressure shoe in front of top tool holder, adjustable to tool circle and can be swivelled away from the tool, spring-loaded.
Spindle CNC-controlled radially
5. Tool holder – PowerLock – top
-----
Motor with brake: 7.5 kW
Speed incl. high-performance ball bearings: 8,000 rpm
Tool circle: 93–200 mm
Max. tool circle for straight knife heads: 180 mm
Max. profiling depth: 35 mm
Axial travel: 40 mm
Split pressure shoe in front of top tool holder, adjustable to tool circle and can be swivelled away from the tool, spring-loaded.
Spindle CNC-controlled axially and radially
6. Tool holder – PowerLock – bottom
-----
Motor with brake: 7.5 kW
Speed incl. high-performance ball bearings: 8,000 rpm
Tool circle: 93–200 mm
Max. profiling depth: 15 mm
Axial travel: 35 mm
Spindle CNC-controlled radially
Feed system
-----
Frequency-controlled feed, steplessly adjustable with brake: 4 kW, 5–30 m/min
Indiv...
iklan kecil
Rattelsdorf
11.014 km
Mesin penggiling pisau
WEINIGRondamat 1000 CNC
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Massive spindle carrier with precision guides for concentricity accuracy below 0.005 mm.
Motorized radial adjustment for different grinding wheel diameters.
Automatic setting of clearance angles:
– Automatic axial clearance angle adjustment
– Automatic lateral clearance angle adjustment
Grinding spindle with HSK interface
HSK 50F
Grinding wheel diameter min./max.: 150mm/200mm
Grinding wheel width (CBN, diamond): 2-3-4-10mm
Grinding wheel bore: 60mm
Grinding spindle drive: 4kW (5.5 HP)
Spindle speed, frequency-controlled: 1500-4800 rpm
Clearance angle grinding:
Radial, at knife back: 10–30 degrees
Lateral, depending on profile contour: 0–20 degrees
Accessories:
3 grinding wheel mounts for 200mm wheel diameter
1 Borazon grinding wheel for profile knives in HSS,
wheel diameter 200 mm,
B 151 – radius 3 mm, coarse grinding
1 Borazon grinding wheel for profile knives in HSS,
wheel diameter 200 mm,
B 151 – radius 2 mm, coarse grinding
1 Borazon grinding wheel for profile knives in HSS,
wheel diameter 200 mm,
B 151 – radius 1 mm, finish grinding
Ndedpjwp Udpofx Ab Eed
LED light for machine interior
Extras:
Automatic grinding wheel measurement via mechanical measuring process for precise positioning of the wheel to the grinding rest
Measurable diameters min–max: 145–200mm
Automatic tool changer with 3 magazine positions
Coolant unit
Prevents overheating of knives even at high material removal rates.
Coolant tank approx. 70l
Coolant additive 5l
Coolant pump motor 210 Watts
Tool holder:
"PowerLock" 360 system
For grinding PowerLock tools and large-diameter boring tools.
– Max. tool weight: 50kg
– Tool holder with manual HSK quick-clamping system (mountable for right- and left-hand tools)
– Max. tool width: 360mm
– Max. tool swing diameter: 300mm
– Min. tool swing diameter: 90mm
– Including PowerLock adapter for holding conventional tools with 40 mm shank diameter
Second tool holder including HSK clamping unit and indexing fixture
Your advantage:
– No re-mounting of the tool holder required depending on tool rotation direction
– A right-hand and a left-hand rotating tool can be set up simultaneously on the machine.
iklan kecil
Wijchen
11.326 km
Mesin profil empat sisi Weinig Profimat 26 Super 2001
WeinigProfimat 26 Super
Hubungi
Kondisi: bekas, Tahun pembuatan: 2001, de-1
Nodpfxownizms Ab Eodd

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan
iklan kecil
Juszczyn
10.388 km
Formier
WeinigH30N
Hubungi
Kondisi: sangat baik (bekas), Four-sided planer Weinig H30N
Working width: 300 mm
Working height: 200 mm
Number of spindles: 5
Spindle configuration:
Nodpfx Absumtlqe Eodd
- Bottom: 11 kW
- Right: 11 kW
- Left: 11 kW (spindle angle adjustable up to 90°)
- Right: 7.5 kW (spindle angle adjustable up to 45°)
- Top: 11 kW
Feed speed: adjustable by variator, up to 22 m/min
Feed motor power: 9 kW
Worktable drive:
– 3 rows of serrated feed rollers in front of the first cutterhead
– 5 rows of smooth feed rollers
Top drive:
– 9 rows of feed rollers
Machine weight: 6100 kg
Machine dimensions: 470 x 190 x 160 cm (H)
iklan kecil
Liptovský Hrádok
10.388 km
Rondamat 960
WeinigRondamat 960
Hubungi
Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, de-001
Ndsdpfxexlk Nqe Ab Eod
Temukan lebih banyak mesin bekas
iklan kecil
Tauberbischofsheim
11.108 km
Planer empat sisi WEINIG tipe Profimat 23
WeinigProfimat 23
Hubungi
Kondisi: bekas, Mesin serut dan profil otomatis Weinig Profimat 23 untuk penyerutan dan pemprofilan kayu empat sisi dengan alat dan tambahan gergaji leist kaca untuk produksi jendela.
Spindel: 5
Spindel 1: Bawah
Spindel 2: Kanan
Spindel 3: Kiri
Spindel 4: Atas
Spindel 5: Bawah
Spindel 6: Gergaji leist kaca
Lebar kerja: 230 mm
Tinggi kerja: 120 mm
Nodpfxsxc Hhwe Ab Eodd
Daya total: 28 kW
Arus nominal: 60 A
iklan kecil
Oberkochen
11.093 km
Mesin rabat otomatis
WEINIGUnivar 10/3
Hubungi
Kondisi: bekas, Number of spindles: 4 pcs
Number of tool sets: 11 pcs
Spindle diameter: 50, 40 mm
Spindle length: 285, 125 mm
Length: 4000 mm
Width: 2000 mm
Height: 2200 mm
Weinig Univar 10/3 Rebate Machining Center
---
For rebating windows, doors, and similar workpieces with asymmetrical, continuous profiles. Machine suitable for timber thicknesses from 68 to 92 mm.
Cycle time for rebating a frame of medium size 1.20 x 1.20 m: approx. 2 minutes.
The available tool positions are selected via a selector switch on the operator panel.
Machine equipped with 3 hydraulically operated right-hand precision lifting spindles for holding 3 tool sets, with spindle stroke: 2 x 95 mm per spindle.
The spindle stroke is performed in a U-motion, keeping the opening in the fence as small as possible for short workpieces. Horizontal stroke adjustment is finely controllable for both tool positions from the operator side.
Central lubrication system for the spindle units.
For tear-free rebating of window sashes, frames, or doors, the first spindle can be switched to right or left rotation.
For the last 100 mm of each frame end, this spindle with the corresponding tool in climb cut mode plunges into the passing timber. This prevents tear-out from the following profile spindle, which operates in counter-rotation.
Lifting of the first 7 feed rollers via foot switch. This reduces throughput time. An additional support rail allows rebating of large-format frames as well.
Continuous, chainless rubber roller feed with extremely short roller spacing. Height adjustment for the feed beam can be displayed electronically.
Electrical design according to VDE standards.
Machine supplied with operator tools, but without machining tools.
Technical Data:
Minimum working width: 40 mm
Minimum/maximum working height: 30 mm / 100 mm
1st profiling spindle (climb and conventional cutting)
---
Motor power, lifting spindle: 11.0 kW
Spindle speed: 6000 RPM
Spindle diameter: 50 mm
Clamping length: 285 mm
Tool zero circle: 112 – 140 mm
Max. tool diameter: 232 mm
Vertical spindle stroke: 2 x 95 mm for 3 tools
Base position below table: 10 mm (adjustable up to 20 mm)
Horizontal spindle stroke: 80 mm
with climb-in plunge automation
2nd profiling spindle
---
Motor power, lifting spindle: 11.0 kW
Spindle speed: 6000 RPM
Spindle diameter: 50 mm
Clamping length: 285 mm
Tool zero circle: 112 – 140 mm
Max. tool diameter: 232 mm
Vertical spindle stroke: 2 x 95 mm for 3 tools
Base position below table: 10 mm (adjustable up to 20 mm)
Horizontal spindle stroke: 80 mm
3rd profiling spindle
---
Motor power, lifting spindle: 11.0 kW
Spindle speed: 6000 RPM
Spindle diameter: 50 mm
Njdpfx Abevnv Uuj Ejdd
Clamping length: 285 mm
Tool zero circle: 112 – 140 mm
Max. tool diameter: 232 mm
Vertical spindle stroke: 2 x 95 mm for 3 tools
Base position below table: 10 mm (adjustable up to 20 mm)
Horizontal spindle stroke: 80 mm
4th profiling spindle – hardware machining unit, right
---
For grooving the hardware rebate during the rebating process or for longitudinal grooving in the profile.
Pneumatic horizontal movement selectable via switch on the operator panel.
Motor: 2.2 kW
Speed: 6000 RPM
Spindle diameter: 40 mm
Clamping height: 125 mm, for 2 tools
Tool flight circle: min. 140 mm, max. 180 mm
Feed motor power: 1.1 kW
Feed speed...
iklan kecil
Rattelsdorf
11.014 km
Planer dan moulder
WEINIGUnimat 23 Lamelliermaschine, Nutenbett
Hubungi
Kondisi: baik (bekas), Four-side planer Weinig Unimat 23 Lamella machine
9 spindles,
grooved bed
Working width: 230 mm
Working height: 170 mm
Spindle diameter: 40 mm
Feed: 5.5 kW / 6–36 m/min
Spindle arrangement:
1–Bottom (5.5 kW)
2–Right (5.5 kW)
3–Left (5.5 kW)
Nodpfx Abepq T Rbe Ejdd
4–Right (5.5 kW)
5–Top (11 kW)
6–Bottom (5.5 kW)
7–Top (7.5 kW)
8–Bottom (37 kW)
9–Universal (11 kW)
5 powered rollers in the table
iklan kecil
Grońsko
10.616 km
Alat serut
WEINIGCube
Hubungi
Kondisi: sangat baik (bekas), Mesin serut empat sisi WEINIG cube
Lebar serutan: 260 mm
Tinggi serutan: 160 mm
Jumlah spindle: 4
Motor: 1 x 7,5 kW, 1 x 11 kW, dan 1 x 7,5 kW
Kecepatan pengumpanan: 6 dan 12 m/menit
Pengaturan lebar dan tinggi serutan bermotor
Layar kendali sentuh
Kecepatan spindle: 6.000 rpm
Diameter spindle: 40 mm
Nedpfx Abjxlqu Ts Ejdd
Dimensi mesin: 370 x 150, tinggi - 170 cm
Kondisi: sangat baik
iklan kecil
Juszczyn
10.388 km
Formier
WeinigH30N
Hubungi
Kondisi: sangat baik (bekas), Four-Sided Planer Weinig H30N
Working width: 300mm
Working height: 200mm
Number of spindles: 5
Spindle arrangement:
- Bottom: 11 kW
- Right: 11 kW
- Left: 11 kW (adjustable spindle angle up to 90°)
- Right: 7.5 kW (adjustable spindle angle up to 45°)
- Top: 11 kW
Feed speed: adjustable via variator up to 22 m/min
Feed motor power: 9 kW
Table drive:
– 3 rows of ribbed feed rollers before the first cutterhead
– 5 rows of smooth feed rollers
Upper drive:
Nedpsumtlkofx Ab Eedd
– 9 rows of feed rollers
Machine weight: 6100 kg
Machine dimensions: 470 x 190 x 160 cm (H)
iklan kecil
Kehra
10.014 km
Gergaji mitra umpan dorong
Tigerstop not Weinig DimterUKA 600
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, 1 Stufenhub-Winkelsäge UKA 600 mit pneumatischem Hub und Spannvorrichtung
Sägeeinheit auf einem Drehtisch mit einem Durchmesser von 980 mm montiert
Sägeblattdurchmesser: 600 mm
Schnittkapazität: 165 x 240 mm bei 90°
Maximale Schnitthöhe: 165 mm am Anschlag und 175 mm Durchmesser (bei 90°) für Rundmaterial
Schnittwinkel: 30 – 90 – 30°
45 – 90 – 45° mit Automatikfunktion
Motorleistung: 5,5 kW
Spannung: 400 Volt, 50 Hz
Arbeitshöhe: 920 mm
1 TigerStop 7.5 automatischer Anschlag und Schieber
Gesamtlänge: 7,95 m
Arbeitslänge: 7,35 m
Nutzbare Arbeitslänge (automatische Säge): 6 m
Spannung: 220 Volt, 50 Hz
Motorleistung: 0,45 kW
Vorschubgeschwindigkeit: max. 40 m/min (abhängig von der Belastung)
Präzision: +/- 0,4 mm als Schieber
Einlauftisch für TigerStop 6.8
Gesamtlänge: 7,4 m
Ndjdpoxivhaefx Ab Eed
Tischbreite: 325 mm
1 Auslauf-/Einlauftisch mit Seitenanschlag
Länge: 3,7 m
Breite: 325 mm
Rechtsseitige Schieberversion (Video zu Demonstrationszwecken)
Die Maschine kann über Drucktaster halbautomatisch bedient werden oder vollautomatisch für 90°-Schnitte, gesteuert durch das TigerStop-System. Der Drehtisch wird vom TigerStop Servoantrieb TigerDrive gesteuert.
iklan kecil
San Giovanni Al Natisone
10.894 km
Weinig Profimat 22 dengan 4 poros, dengan poros bergerak otomatis
WeinigProfimat 22 N
Hubungi
Kondisi: bekas, Weinig Profimat 22 A 4 left mobile unit with measuring sensor, enabling automatic adjustment based on the width of the workpieces being processed.
Dimensions and weight: 330 x 145 x H160 cm. Weight: 1,400 kg (on pallet).
Nodpfx Aoryb D Seb Eodd
iklan kecil
Oberkochen
11.093 km
Sistem jendela
WEINIGUnicontrol 6 NC-Spindeln
Hubungi
Kondisi: bekas, Slot spindle 1 pc.
Number of milling units: 5 pcs.
Spindle diameter: 50 mm
Control: Weinig, PC-Nexus
#2774 Weinig Unicontrol 6 with NC spindles
Machine will be cleaned and completely inspected prior to delivery
-----
Technical Data Summary (additional accessories possibly included upon request)
Pos. 1: Crosscut Saw
-----
> Number of tools: 1 pc.
> Spindle speed: 2,800 rpm
> Spindle diameter: 40 mm
> Max. tool diameter: 400 mm
> Motor power: 3 kW
> Radial adjustment pneumatically controlled in 8 positions, e.g., for edge rounding from above
> Laser alignment light for recognizing the saw section
Pos. 2: Rounding Unit Horizontal Bottom
-----
> Position: horizontal bottom
> Motor power: 1.5 kW
> Spindle diameter: 20 mm
> Clamping length: 25 mm
> Spindle speed: 9000 rpm
> Max. tool diameter: 130 mm
> Axial adjustment mechanically coupled to crosscut saw
> Radial adjustment pneumatically controlled on/off
NC-controlled length stop
-----
> Length: 3500 mm
> Electronic length stop
Pos. 3: Tenoning and Slotting Spindle
-----
> Number of tools: variable, stepless adjustment, NC
> Tool clamping length: 320 mm
> Vertical spindle stroke: variable 254 mm, stepless, NC-controlled
Nsdpfjvu Hghex Ab Eodd
> Spindle speed: 3,500 rpm
> Max. tool diameter: 320 mm
> Spindle diameter: 50 mm
> Max. tool diameter: 320 mm
> Motor power: 11 kW
Pos. 4: 1st Profiling Spindle (climb and conventional milling)
-----
> Position: vertical right
> Number of tools: 1 pc.
> Tool clamping length: 120 mm
> Spindle speed: 6,000 rpm
> Spindle diameter: 50 mm
> Max. tool diameter: 232 mm
> Motor power: 7.5 kW
Pos. 5: 2nd Profiling Spindle
-----
> Position: vertical right
> Number of tools: variable, stepless adjustment, NC
> Tool clamping length: 320 mm
> Vertical spindle stroke: variable 254 mm, stepless, NC-controlled
> Spindle speed: 6,000 rpm
> Spindle diameter: 50 mm
> Max. tool diameter: 232 mm
> Motor power: 11 kW
2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions
Sash bar guide consisting of:
Guide fence on the stop (area of climb-cut spindle),
Sash bar support rail from above in the area of vertical right profiling unit and profiling spindle.
Pos. 6: Profiling/Milling Unit, Horizontal Top
-----
> Clamping length: 40 mm
> Spindle diameter: 40 mm
> Motor power: 3.0 kW
> Speed: 9,000 rpm
> Max. tool diameter: 130 mm
> Axial adjustment: 30 mm, 8 positions
> Radial adjustment: 125 mm, 8 positions
Pos. 7: 3rd Profiling Spindle (Fitting Spindle)
-----
> Position: vertical right
> Tool clamping length: 160 mm
> Axial adjustment: 115 mm, 8 positions
> Radial adjustment: 110 mm, 8-position turret
> Spindle speed: 5,850 rpm
> Spindle diameter: 40 mm
> Max. tool diameter: 210 mm
> Motor power: 3.0 kW
Pos. 8: Profiling/Grooving Unit from Below
-----
> Motor power: 3.0 kW
> Tool clamping length: 125 mm
> ...
iklan kecil
Kłodawa
10.673 km
4 sisi planer unimat U23 7 kepala
WEINIGunimat u 23 7 głowic
Hubungi
Tahun pembuatan: 1990, Kondisi: diremaj di bengkel (bekas), 4-sided planer Weinig, 7-head, universal, head arrangement: bottom horizontal, right vertical, left vertical, right vertical, top horizontal, bottom horizontal, and the last one universal. Drive is provided via cardan shafts. The drive is protected with Rotax couplings. Workpiece feed is pneumatic. Feed speed is smoothly adjustable by frequency inverter. Machine feed speed: 0–42 m/min. Motors: 2.5 kW and 7.5 kW. Table newly ground and new. Additionally, new cabling and new electrics. Machine after complete overhaul. Warranty included.
Ndjdpfopqxnxex Ab Esd
iklan kecil
Drachten
11.270 km
Rem Siemens EMG-15
Weinig SiemensEMG 15 Bremse/Brake
Hubungi
Kondisi: diremaj di bengkel (bekas), 1 x electronic motor brake EMG15
Power range: 3 to 15 kW
Voltage range: 200-575V
50 Hz/60 Hz
Siemens EMG 15
Ndsdpjxc D Uusfx Ab Ejd
Motor brake for Weinig planing machine Unimat and Hydromat
iklan kecil
Juszczyn
10.388 km
Formier
WeinigProfimat 23 Fortec
Hubungi
Kondisi: sangat baik (bekas), Four-sided planer Weinig Profimat 23 Fortec
Working width: 230 mm
Working height: 140 mm
Njdpfxeumxqro Ab Esdd
Number of spindles: 6
Spindle configuration:
Bottom: 7.5 kW
Right
Left: 11 kW
Top: 7.5 kW
Top: 5.5 kW
Bottom: 5.5 kW
Pneumatic pressure rollers
Feed speed adjustable via variator
Drive via cardan shafts
CE certificate
iklan kecil
San Giovanni Al Natisone
10.894 km
Weinig Unimat 22A dengan poros kiri otomatis
Weinig22A Unimatic
Hubungi
Kondisi: diremajakan ulang (bekas), Weinig moulder, model 22A Unimatic
Working table width: 220 mm, with grooved table for short workpieces.
Cardan shaft feed.
Motor configuration and power ratings:
Bottom spindle: 5.5 kW
Right spindle: 5.5 kW
Njdpfx Asu Sr Ddob Eodd
Left automatic spindle (moveable spindle): 5.5 kW
Right spindle: 5.5 kW
Top spindle: 5.5 kW
Bottom spindle: 5.5 kW
Feed motor: 4 kW
Hydraulic unit for the automatic left spindle: 0.9 kW
The left moveable spindle adjusts automatically to the width of the inserted workpiece.
iklan kecil
Oberkochen
11.093 km
Empat sisi planer
WEINIGPowermat 1200 EM 100 High-Mech
Hubungi
Kondisi: bekas, Weinig Powermat 1200
Number of spindles: 6 pcs
Working width: 230 mm
Planing height: 160 mm
Infeed table length: 1050 mm
Feed motor: 7 kW
Feed speed: 6–40 m/min
With infeed automation: Weinig Radmagazin EM 100, linked
With outfeed automation: Weinig High-Mech A 1
Machine is fully overhauled in our warehouse prior to delivery!
Detailed Description:
1. Weinig Moulder and Planing Machine Powermat 1200
Technical Specifications:
Working width: 20–230 mm (with tool cutting circle 93–163 mm)
Working height: 10–160 mm (with tool cutting circle 93–163 mm)
1st Spindle
---
First lower horizontal spindle
Motor with brake: 7.5 kW
Spindle diameter: 50 mm
Speed: 8,000 rpm
Tool cutting circle: 125–180 mm
With PowerLock: 93–180 mm
Tool cutting circle for rebate cutter: 130–160 mm
Axial adjustment: 17 mm
Ndsdpfx Absvnwbcs Ejd
Rebating unit
MarathonCoating before 1st lower tool holder
2nd Spindle
---
First right vertical spindle
Motor with brake: 7.5 kW
Spindle diameter: 50 mm
Speed: 8,000 rpm
Tool cutting circle: 93–200 mm
Max profiling depth: 35 mm
Axial adjustment: 80 mm
Radial adjustment
Min tool diameter at fence level: 93 mm
Max tool diameter behind fence: 200 mm
3rd Spindle
---
First left vertical spindle
Motor with brake: 7.5 kW
Spindle diameter: 50 mm
Speed: 8,000 rpm
Tool cutting circle: 93–200 mm
Tool cutting circle for straight knife heads max 163 mm
Max profiling depth: 35 mm
Axial adjustment: 80 mm
Pressure shoe before left tool holder, incl. 2 spring-loaded lateral pressure rollers
4th Spindle
---
First upper horizontal spindle
Motor with brake: 7.5 kW
Spindle diameter: 50 mm
Speed: 8,000 rpm
Tool cutting circle: 93–200 mm
Tool cutting circle for straight knife heads max 163 mm
Max profiling depth: 35 mm
Axial adjustment: 40 mm
Divided pressure shoe before upper tool holder, adjustable to tool cutting circle and can be swivelled away, spring-loaded.
Upper spindle prepared for subsequent installation of cassette system
5th Spindle
---
Second upper horizontal spindle
Motor with brake: 7.5 kW
Spindle diameter: 50 mm
Speed: 8,000 rpm
Tool cutting circle: 93–200 mm
Tool cutting circle for straight knife heads max 163 mm
Max profiling depth: 35 mm
Axial adjustment: 40 mm
Divided pressure shoe before upper tool holder, adjustable to tool cutting circle and can be swivelled away, spring-loaded.
Upper spindle prepared for subsequent installation of cassette system
6th Spindle
---
Second lower horizontal spindle
Motor with brake: 7.5 kW
Spindle diameter: 50 mm
Speed: 8,000 rpm
Tool cutting circle: 93–225 mm
Max profiling depth: 15 mm
Axial adjustment: 40 mm
Radial adjustment
Min tool diameter to table level: 93 mm
Max tool diameter 6 mm below table level: 225 mm
All spindles with high concentricity accuracy.
Lubrication points for axial tool carrier movement.
Feed System
---
Electronic feed, infinitely variable with brake, 6–40 m/min, motor 7 kW
...
iklan kecil
Drachten
11.270 km
Rem Siemens EMG-15 untuk Weinig
WEINIGEMG-15
Hubungi
Kondisi: diremaj di bengkel (bekas), 1 x electronic motor brake EMG15
Njdpjxc D Tqofx Ab Ejdd
Power range: 3 to 15 kW
Voltage range: 200-575V
50 Hz/60 Hz
Siemens EMG 15
Motor brake for Weinig planing machine Unimat and Hydromat
iklan kecil
Juszczyn
10.388 km
Planer empat sisi yang lebih besar
WeinigUnimat 23
Hubungi
Kondisi: sangat baik (bekas), Four-sided planer Weinig Unimat 23
Working width: 230 mm
Working height: 160 mm
Number of spindles: 5
Spindle arrangement:
- Bottom: 5.5 kW
- Right
- Left: 7.5 kW
- Top: 11 kW
- Bottom: 5.5 kW
Material pneumatic hold-downs divided into 4 sections
Feed speed adjustable via variator: 4–24 m/min
Infeed table length: 1980 mm
Drive via cardan shafts
Ndjdpfxotxxwde Ab Eed
Heavy-duty soundproof cabin
Machine dimensions: 380 x 226 x 178 cm (H)
CE certificate
iklan kecil
Udine
10.905 km
Mesin cetak Weinig U17N dengan poros cardan, poros 7+1
WeinigU17N
Hubungi
Kondisi: bekas, Weinig Unimat U17N moulder with 7+1 spindles, spindle length 170 mm, equipped with grooved table and cardan shaft feed.
Spindle configuration:
Nedpspfp Elefx Ab Eedd
Bottom, right, left, right, top, bottom, left, universal.
Spindle motor power: 4 + 4 + 5.5 + 5.5 + 7.5 + 5.5 + 5.5 + 7.5 kW.
Feed motor power: 4 kW. Raise/lower motor: 0.75 kW.
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

iklan kecil
Oberkochen
11.093 km
Sistem jendela
WEINIGUnicontrol 6 NC Spindeln
Hubungi
Kondisi: bekas, Slot spindle 1 pc.
Number of milling units: 4 pcs.
Spindle diameter: 50 mm
Control: Weinig, PC-Nexus
# 2764 Weinig Unicontrol 6 with NC spindles
-----
Machine will be cleaned and thoroughly checked prior to delivery
Technical Data Summary
(Please enquire regarding any additional included accessories)
Pos. 1: Crosscut Saw
-----
> Electronic, horizontally adjustable crosscut saw (stepless)
> Number of tools: 1 pc.
> Spindle speed: 2,800 rpm
> Spindle diameter: 40 mm
> Max. tool diameter: 400 mm
> Motor power: 3.0 kW
> Laser guide for saw cut identification
> NC length stop, mounted on slot table included
Positioning of the crosscut saw integrated into the control system.
> Length: 3500 mm
Pos. 2: Tenoning and Slotting Spindle
-----
> Number of tools: variable, stepless adjustment via NC axis
> Tool clamping length: 320 mm
> Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis
> Spindle speed: 3500 rpm
> Spindle diameter: 50 mm
> Max. tool diameter: 320 mm
> Motor power: 11 kW
Pos. 3: 1st Profiling Spindle (Climb and Conventional Milling)
Nsdjvu Hfqopfx Ab Eodd
> Position: vertical right
> Number of tools: 1 pc.
> Tool clamping length: 120 mm
> Spindle speed: 6,000 rpm
> Spindle diameter: 50 mm
> Max. tool cutting circle: 232 mm
> Motor power: 7.5 kW
Pos. 4: 2nd Profiling Spindle
-----
> Position: vertical right
> Number of tools: variable, stepless adjustment via NC axis
> Tool clamping length: 320 mm
> Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis
> Spindle speed: 6,000 rpm
> Spindle diameter: 50 mm
> Max. tool cutting circle: 232 mm
> Motor power: 11 kW
2 feed rollers opposite the spindle, axially controlled pneumatically, 2 positions
Sash bar guide consisting of:
Guide rail at the fence (climb-milling spindle area),
Sash bar support from above in the area of the vertical right profile milling unit
and profiling spindle.
Pos. 5: Horizontal Top Profile Milling Unit
-----
> Clamping length: 40 mm
> Spindle diameter: 40 mm
> Motor power: 3.0 kW
> Speed: 5,850 rpm
> Max. tool cutting circle: 130 mm
> Axial adjustment 30 mm, 8 positions via pneumatic turret
> Radial adjustment 125 mm, 8 positions via pneumatic turret
Pos. 6: 3rd Profiling Spindle (Fitting Spindle)
-----
> Position: vertical right
> Tool clamping length: 160 mm
> Axial adjustment 115 mm, 8 positions via pneumatic turret
> Radial adjustment 100 mm, 8 positions via pneumatic turret
> Spindle speed: 5,850 rpm
> Spindle diameter: 40 mm
> Max. tool cutting circle: 210 mm
> Motor power: 3.0 kW
Additional Features
-----
> Online capable
> Rebating unit for tear-free rebating
> Double part clamping kit
> Return feed device for one-person operation: swivel belt
> Screen control
> Angled window device
> Electronic angle display for angled windows
> Industrial PC, PC control/NEXUS
> Weinig type manufacturing program
> Supplied without machining tools
No original images yet available.
Photos show a similar machine from our archive
-----
Price for the above machine on request!
-----
Option at extra charge: EUR 6,500.00
Note...
iklan kecil
Udine
10.905 km
Mesin moulder merk Weinig model PFA 17N dengan 8 poros
WeinigPFA 17N
Hubungi
Kondisi: bekas, Weinig brand moulder, model PFA17N, ribbed table, 8 spindles (bottom 4 kW, right 4 kW, left 5.5 kW, right 4 kW, top 5 kW, bottom 4 kW, universal 4 kW, universal 4 kW), used.
Ndedpfx Aek N I I Nsb Eed
iklan kecil
Oberkochen
11.093 km
Empat sisi planer
WEINIGProfimat 22 N
Hubungi
Kondisi: bekas, Number of spindles: 5 units
Planing width: 220 mm
Planing height: 120 mm
Infeed table length: 2500 mm
Feed motor: 6 kW
Feed speed: 6–22 m/min
Total connected load: 25 kW
Dimensions (L/W/H): 3500 x 1500 x 1600 mm
Njdpfjv Irizjx Ab Eedd
Machine weight approx. 2000 kg
1 WEINIG four-sided planer
Model PROFIMAT 22 N with 5 spindles
-----
Planing width: 220 mm, planing height: 120 mm
Spindle arrangement:
1st spindle (bottom): 4.0 kW
2nd spindle (right) and
3rd spindle (left): 7.5 kW each
4th spindle (top): 5.5 kW
5th spindle (bottom): 4.0 kW
Spindle diameter: 40 mm
Feed: 3 kW, infinitely variable from 6 to 22 m/min
Special features:
Cardan shaft drive
Profiling package
Including 5 used cutterheads.
(Technical data as per manufacturer, subject to change and errors excepted!)
iklan kecil
Oberkochen
11.093 km
Empat sisi planer
WEINIGProfimat 23 Fenster
Hubungi
Kondisi: bekas, Number of spindles: 6 pcs
Working width: 230 mm
Planing height: 120 mm
Surfacing table length: 2500 mm
Feed motor: 3 kW
Feed speed: 5-24 m/min
Total power requirement: 27 kW
Dimensions (L/W/H): 3900 x 2200 x 2000 mm
Machine weight approx: 2500 kg
Weinig Profimat 23 four-sided planer, window version with glass bead cutting, or can be used as a grooving spindle
ATS control and program control
---
Machine is currently being overhauled and function-tested
Technical data summary
(For any additionally included accessories, please enquire)
---
General
---
> Working width: 230 mm
> Working height: 120 mm
> Number of spindles: 6 pcs
> Surfacing table length: 2500 mm
> Feed motor: 3 kW
> Feed speed: 5-24 m/min
> Total power requirement: 27 kW
> Dimensions: 3900 x 2200 x 2000 mm
> Machine weight approx: 2500 kg
Spindle configuration
---
> Spindle 1: bottom
> Spindle 2: right, pneumatically controlled up/down
> Spindle 3: left
> Spindle 4: top
> Spindle 5: bottom
> Spindle 6: glass bead saw, pneumatically controlled up/down
Spindle specifications
---
> Spindle 1: 4 kW, 6000 rpm, 40 mm diameter
> Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter
> Spindle 3: 6000 rpm, 40 mm diameter
> Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter
> Spindle 5: 4 kW, 6000 rpm, 40 mm diameter
> Spindle 6: glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter
Additional features
---
> Glass bead separation or can be used as a grooving device
> ATS control: automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs
> Machine operation: window package
- Shared control of the right spindle and glass bead removal via manual selector switch on the control panel
Nodpfsu Su Hujx Ab Eodd
> Spindles with mechanical digital readout
Option:
Used planing heads
(Technical data according to manufacturer - no liability assumed!)
Kami memudahkan pencarian untuk Anda: "weinig conturex"
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.
Bekas Weinig Conturex (475)
Sekarang telusuri seluruh Machineseeker dengan lebih dari 200.000 mesin bekas.Jelajahi nama mesin paling populer:
- Contur
- Kerucut Mesin
- Mesin Perencanaan Kayu
- Mesin Woodworking
- Tekan Feed
- Weinig Hydromat 23
- Weinig Opticut
- Weinig Powermat
- Weinig Powermat 2000

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan



































































































































































































































