Beli Weinig Unicontrol 10 bekas (526)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, I am selling a complete window manufacturing set: - 1 unit tenoning and slotting machine Weinig Unitec 10 - 1 unit profiling and overlay centre Weinig Univar 10 - Year of manufacture: 1998 - Cutter heads by OERTLI Kdedpfefzzhyjx Acisn - Available immediately - Total price: 17,000 EUR - Condition: very good

Kondisi: diremaj di bengkel (bekas), Slot spindle 1 pc Number of milling units: 4 pcs Kdsdjxpi Duspfx Acien Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – spindles CNC-controlled, radial and axial ----- Machine was factory overhauled by Weinig in 2024. During the overhaul, the control system was also updated to Siemens S7 677 C with a new “Touch” membrane panel. Equipped with the following machining units: Cross-cut saw ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatically in 8 positions for edge rounding from above Bottom-mounted edge rounding unit ----- axial adjustment together with the cross-cut saw Tenoning and slotting spindle ----- motor power 15 kW spindle diameter 50 mm spindle speed 2,925 rpm tool swing diameter min. 380 mm, max. 400 mm tool clamping length 640 mm axial adjustment via CNC axis axial adjustment travel 580 mm axial adjustment speed 100 mm/sec 1st profile spindle (climb and conventional milling) ----- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis 2nd profile spindle ----- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal profile milling unit (top) ----- motor power 3 kW spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment in 8 axial and radial positions Vertical profile milling unit (right side at machine outfeed) ----- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm pneumatic adjustment in 8 axial and radial positions Additional equipment: ----- CNC-controlled length stop, mounted on slotting table, for workpiece lengths up to 3500 mm, incl. cross-cut saw position integrated in control. Studio sash window device, swiveling ±60° Twin part package with automatic singulation and transfer Climb milling facility with window automation for window rebating Rebating cart for rebating of small sash widths Climate unit in control cabinet PC control NEXUS Automatic turning system Lamella conveyor, incl. return belt for transporting workpieces back to operator (Technical data according to manufacturer – no liability accepted).

Kondisi: belum diuji (bekas), 2 slot spindles Number of milling units: 5 Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 NC window processing line, optionally with extensive tooling ----- Options available (with extra cost) IV 68 wood, wood/aluminium IV 78 wood, wood/aluminium IV 68 front doors Technical manufacturer description: ----- Item 1: Weinig Unicontrol 10 NC window processing line ----- Cut-off saw ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed electronically adjustable with brake 3,000-6,000 rpm. Maximum tool diameter: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment pneumatically in 8 positions for edge rounding from above Horizontal corner rounding unit (bottom) ----- Axial movement mechanically connected to the cut-off saw 1st tenoning & slotting spindle ----- Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool diameter: 400 mm Tool clamping length: 640 mm Axial movement: NC axis Base position below table: 5-10 mm Radial movement: fixed 2nd tenoning & slotting spindle ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool diameter: 400 mm Tool clamping length: 320 mm Axial movement: NC axis Radial movement: NC axis Kdodjzawizopfx Acien Base position below table: 5-10 mm 1st profile spindle (climb & counter-rotation) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool diameter: 140 mm Max. tool diameter: 232 mm Clamping length: 400 mm with counter support Axial movement: 350 mm, NC axis Radial movement: NC axis Base position below table: 5-10 mm 2nd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool diameter: 140 mm Max. tool diameter: 232 mm Clamping length: 400 mm with counter support Axial movement: 350 mm, NC axis Radial movement: NC axis Base position below table: 5-10 mm Horizontal profiling unit (top) ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Max. tool diameter: 130 mm Adjustment pneumatically in 8 axial and radial positions 3rd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool diameter: 140 mm Max. tool diameter: 232 mm Clamping length: 400 mm with counter support Axial movement: 350 mm, NC axis Radial movement: NC axis Base position below table: 5-10 mm Vertical profiling unit, right at machine end ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Max. tool diameter: 210 mm Adjustment pneumatically in 8 axial and radial positions Further accessories -----...

Kondisi: sangat baik (bekas), Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, WEINIG Unicontrol UC 10-5 Window Production Machine 1. Electronically controlled cross-cut saw with laser switching between saw cutting and zero-cut wheel, 3 kW motor 2. Grooving spindle 50 x 630 mm for 6 x 80 mm tools, 15 kW motor 3. Longitudinal/profile milling spindle (synchronous) 50 x 320 mm for 4 x 80 mm tools, 11 kW motor 4. Grooving spindle (between 1st and 2nd lifting spindle) D = 40 x 40 mm, axially indexed, 3 kW motor 5. Longitudinal/profile milling spindle 50 x 320 mm for 4 x 80 mm tools, 11 kW motor 6. Longitudinal/profile milling spindle 50 x 320 mm for 4 x 80 mm tools, 11 kW motor 7. Clamping spindle 40 x 150 mm, 3-position axial cycle, 2-position radial cycle, 3 kW motor Saw and grooving spindle on right side, 3 kW motor Fittings spindle 40 x 150 mm, 3 kW motor Adjustable feed rate 6-12 m/min, 1.1 kW motor 4-position tool changer Electronic length stop 3600 mm Workpiece return via automatic rotary system Automation package Interval-controlled sash support Double parts package Kdjdpfx Acexmr N Ijijn Laminated fabric tabletops (for sanded surfaces) Left-side pressure guide, max. wood width difference 100 mm Machine in very good technical and visual condition

Kondisi: bekas, Aggregate 10 Spindle diameter 40 and 50 mm Motor: 1x15 kW, 4x11 kW, 5x3 kW Weinig Unicontrol 10 (UC 10) angle processing centre for the production of windows, components, and doors. Suitable for batch, series, or single-part production with 2 tenoning and mortising spindles, incl. Oertli tooling set. - Units: 1. Cross-cut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and mortising spindle, NC axis, ø 50 mm, 15 kW, clamping length: 640 mm (8 x 80 mm) 3. Second tenoning and mortising spindle, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 5. Horizontal profiling unit (top), 3 kW 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 8. Vertical profiling unit, right, 3 kW 9. Vertical profiling unit, right from above, 3 kW 10. Horizontal profiling unit (bottom), NC axis, 3 kW - Double-part package - Rebating package with rebating carriage - Automatic turning system - PC control NEXUS Kdjdpfev Ag Tdex Acion - CNC-controlled length stop - Studio window device - Edging unit from below with cross-cut saw - Mullion support bar - Incl. extraction duct system - Incl. Oertli tooling set - Further technical data and tooling drawings available on request.

Kondisi: bekas, Tahun pembuatan: 2000, Lokasi gudang: Nattheim Ksdsvwdmwjpfx Acisdn

Kondisi: bekas, Used control cabinet from a Weinig Unicontrol 10, suitable as a source of spare parts or for rebuilding a control cabinet. Contents include, among others: Kdsdperrk I Hofx Acijn - Siemens Simatic S5 - Siemens EMG 45

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 100 mm, jarak gerak sumbu Z: 142 mm, produsen pengendali: SIEMENS, model controller: WS 400-20, CNC machining center from 1997. This WEINIG / DIMTER Unicontrol 10 offers a maximum workpiece length of 3,600 mm and a maximum workpiece height of 100 mm. It features a powerful cross-cut saw with a spindle speed of up to 3,000 rpm and a tenoning spindle motor power of 15 kW. If you are looking for high-quality CNC processing solutions, you should consider the WEINIG / DIMTER Unicontrol 10, which we are offering for sale. Contact us for further details. • Max. workpiece height: 100 mm • Min. workpiece height: 40 mm • Min. workpiece width: 40 mm • Max. workpiece width: 140 mm • Max. workpiece length with CNC stop: 3,500–3,600 mm • X-axis travel: 3,000–3,500 mm (depending on version) • Cross-cut saw motor power: 3.7 kW • Cross-cut saw spindle speed: 2,800–3,000 rpm • Cross-cut saw max. tool diameter: 400 mm • Cross-cut saw spindle diameter: 40 mm • Number of tenoning/grooving spindles: 2 units • Tenoning spindle diameter: 50 mm • Clamping length of tenoning spindle: 400–640 mm • Tenoning spindle max. tool diameter: 400 mm • Tenoning spindle 1 motor power: 11 kW • Tenoning spindle 2 motor power: 15 kW • Tenoning spindle speed: 2,900–3,250 rpm Kdodpfey Ixpaex Acijn • Number of profiling spindles (vertical): 2–3 units • Profiling spindle diameter: 50 mm • Clamping length of profiling spindle: 320–400 mm • Profiling spindle max. tool diameter (swing circle): 232 mm • Profiling spindle motor power: 11 kW (each) • Profiling spindle speed: 6,000 rpm • Motor power of horizontal profiling unit (top): 3 kW • Spindle diameter of horizontal profiling unit: 40 mm • Horizontal profiling unit max. tool diameter: 130 mm • Horizontal profiling unit speed: 5,850 rpm

Kondisi: bekas, Tahun pembuatan: 1998, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 83406, Pusat pemrosesan jendela Weinig Unicontrol 10, tahun pembuatan 1998 Kdjdpfx Aoy Sxlpecijn

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), daya motor spindle: 11.000 W, kecepatan spindel (maks.): 6.000 rpm, This Weinig Unicontrol 10-5 was manufactured in 1998. It is a robust pre-owned window production machine with a working width of 40-220 mm and a motor power of up to 15 kW for various processing units. The machine is equipped with advanced features such as a synchronization device, electronic height adjustment, and an automatic reversing system for efficient single-operator control. If you are looking for a high-quality profiling machine, you should consider the Weinig Unicontrol 10-5 we have for sale. Contact us for further details. • Capacity • Working width: 40-220 mm • Working height (longitudinal processing): 40-100 mm • Working height (cross processing): 40-100 mm (crossgrain height 80 mm) • Workpiece length (longitudinal): min. 220 mm + 2 x tenon length • Workpiece length (cross): min. 275 mm + 1 x tenon length with 320 mm tool diameter • Feed (cross processing) • Motor power: 0.3 kW • Feed speed: 3-25 m/min • Workpiece clamping: 2 pressure pads • Length stop: with scale and magnifier for frame or sash outer dimensions • Counter: pneumatically indexed, 4 positions (not for studio-type windows), up to a max. wood height of 80 mm • Double-part package: single or double-part feeding, with cross separation and retention system • 1st piece (on the stop) wood width: 55-90 mm • 2nd part wood width: 130 mm • Feed (longitudinal processing) • Motor power: 2.2 kW • Feed speed: 4-18 m/min (infinitely adjustable via frequency inverter) • Feed roller spacing: 100/120 mm • Feed roller width: 30/50 mm • Feed roller diameter: 95 mm • Processing units • Cross-cut saw • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 2800 rpm • Tool stroke: max. 400 mm • Axial adjustment: pneumatic, via 4-position turret • 1st spindle with tenoning and slotting • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 3250 rpm • Tool stroke: max. 320 mm • Tool clamping length: 320 mm • Axial adjustment range: 240 mm • Number of tools: 4 x 80 mm • Axial adjustment: hydraulic • 1st profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool zero-point swing-circle: 130-140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 2nd profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm Kedpfx Aox S Sk Escisdn • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool zero-point circle: 130-140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • Mechanical spindle brakes • For profiling spindle(s) • For cross-cut saw and profiling/sawing units • Profile milling unit (horizontal, top; in front of the last profiling spindle) • Radially switched: 2 positions • Axially switched: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool stroke: 130 mm • Tool clamping length: 40 mm • Axial adjustment range: 52 mm • Radial adjustment range: 125 mm • Profile milling unit (vertical, right; at the end of the machine) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool stroke: 210 mm • Tool clamping length: 160 mm

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), A Weinig angle line for window and door production is available. Maximum tool outside diameter: 320 mm, maximum tool cutting circle: 232 mm, mortising spindle length: 640 mm, profiling and co-directional play length: 285 mm to 320 mm, control system: Siemens WS400. Includes complete tooling set and sash window equipment. Documentation available. Kdjdpfx Astq U A Iscisn

Kondisi: belum diuji (bekas), Tahun pembuatan: 1999, Spindle slotting unit 1 pc. Number of milling units 4 pcs. Spindle diameter 50 mm Control Weinig PC-Nexus # 7015 Weinig Unicontrol 6 with NC spindles ----- Machine available for inspection in operation until September 2026 Technical Data Summary (additional included accessories if any, please inquire) Item 1: Cross-cut saw ----- > Cross-cut saw electronic, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for cut detection > NC length stop, mounted on the slotting table included Positioning of the cross-cut saw integrated in the control. > Length 3500 mm Item 2: Tenoning and slotting spindle ----- > Number of tools: variable, infinitely adjustable NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm NC axis > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Maximum tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (climb and counter-rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Maximum tool diameter: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely adjustable NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm NC axis > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Maximum tool diameter: 232 mm > Motor power: 11 kW Item 5: Horizontal top profiling milling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Maximum tool diameter: 130 mm > Axial adjustment: 2 positions > Radial adjustment: 2 positions Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 3 positions > Radial adjustment: 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 210 mm > Motor power: 3.0 kW Other features ----- > Online-capable > Sash rebate device for tear-free rebating > Double part package > Return feed unit for single-operator use: Lamella conveyor > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Without machining tools ----- Price of the above-mentioned machine on request! ----- Option at extra charge: EUR 6,500.00 Note on used tools: We currently have used Gold tools, stock no. #2790 Window tools Gold IV78 wood and IV78 wood/aluminum Previously used on Weinig Unicontrol 10; for use on Unicontrol 6, an additional jointing cutter is required. Kedpezdk Hyjfx Acisdn Tool set for FIXED-STROKE or CNC spindle machines 80 and 95 mm stroke (tool set, where technically possible, prepared for IV 92) Wood-aluminum tool set for FIXED-STROKE machines 80 and 95 mm stroke - supplementary tools 1 set Stehle IV68 wood also included Without bla...

Kondisi: belum diuji (bekas), Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Used Weinig Unicontrol 6 window manufacturing line ----- For sale on behalf of a customer Manufacturer's description: For the production of individual components, elements, and small batches. Spindle arrangement: One cross-cut saw, one single-sided tenoning and slot spindle, one right-hand profiling spindle, one tenoning-slot spindle, and one profiling spindle suitable for stacking multiple tools on top of each other, equipped with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer into the continuous, chainless rubber roller feed of the profiling unit, feed height adjustment is manual. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifier for frame or sash outer dimension. Position control of the tools (longitudinal and cross machining) via rotary selector switch from the control panel. Technical specifications ----- Cross-Cut Saw ----- Number of tools: 1 Spindle speed: 2,800 rpm Spindle diameter: 40 mm Maximum tool diameter: 350 mm Motor: 3 kW Tenoning and slot spindle ----- Number of tools: 3/4 pcs. for timber thickness IV 68 - IV 92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 320 mm Motor: 11 kW Profiling spindle ----- Number of tools: 3/4 pcs. for timber thickness IV 68 - IV 92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 232 mm Motor: 11 kW Special equipment: Co-rotating spindle ----- Pneumatically actuated for splinter-free rebating of window sashes, frames, and doors. Spindle diameter: 50 mm, 4 kW Tool clamping length: 120 mm, tool zero diameter: 112-140 mm, Maximum tool diameter: 232 mm, spindle speed: 6,000 rpm Motor upgrade for co-rotating spindle from 4 kW to 7.5 kW Monitor-based control for 99 window types, 1 type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, frame mode, series mode, rebating. Data entry via keypad with integrated operator guidance and fault diagnosis. 1 grooving spindle from above ----- Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm, with keyway 10 x 4 mm Clamping length: 13 mm Clamping length: 40 mm Axial positions: 2 Radial positions: 2 Max. tool diameter: 130 mm Motor upgrade for grooving spindle from 2.2 to 3 kW 1 hardware milling unit, right: ----- Kedpfx Asx Tu N Hocisdn For routing the hardware groove during rebating or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on control panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool circle diameter: min. 140 mm, max. 180 mm Home position under table surface: 10 mm Hardware router in special design: Clamping length: 150 mm Axial stroke: 80 mm, 3 positions 3 tools Radial positions: 2 Motor upgrade for hardware milling spindle from 2.2 to 3 kW Hardware milling spindle for 230 mm tool diameter both in and above the table Electric height adjustment of the feed with selector switch on the control panel for 2 wood dimensions, including...

Kondisi: belum diuji (bekas), Tahun pembuatan: 2004, Spindle slotter 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm Control: Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial NC spindles as well as VARIO table ..... Machine has already been professionally dismantled and stored at 73447 Oberkochen Technical Data Summary (additional included accessories on request) ..... Cross-cut saw ..... Kjdoyrtzkspfx Acijdn > Cross-cut saw electronic, stepless horizontal adjustment > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser alignment light for detection of saw section > Axial travel 150 mm NC axis, stepless electronic > Radial travel pneumatic, 8 positions for e.g. edge rounding from above Rounding unit ..... > Position: horizontal bottom > Axial travel together with cross-cut saw. electronic length stop ..... > Length: 4500 mm 1st Tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial travel: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400 mm > Rear counter bearing, the full clamping length is supported 2nd Tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial travel: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400 mm > Rear counter bearing, the full clamping length is supported Transfer belt ..... For transfer of parts to longitudinal processing including double part separation upstream of the longitudinal processing infeed. 1st Profiling spindle (climb and conventional milling) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial travel 350 mm NC axis, stepless > Radial travel 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm 2nd Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial travel 350 mm NC axis, stepless > Radial travel 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm 3rd Profile milling unit (grooving unit from above) ..... > Position: horizontal top > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial travel 30 mm NC axis, stepless > Radial travel 125 mm NC axis, stepless > Spindle speed: 90...

Kondisi: belum diuji (bekas), Slot spindle 2 pcs. Number of milling units: 7 Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial NC spindles, as well as VARIO table and trimming carriage ..... Machine properly dismantled and stored at our warehouse in 73447 Oberkochen. Video and pictures were taken prior to disassembly. Technical Data Summary (Please inquire separately for any potentially included accessories) ..... Cross-cut saw ..... > Cross-cut saw, electronic, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser guide light for identifying cutting section > Axial adjustment travel: 150 mm, NC axis, electronically infinitely adjustable > Radial adjustment: pneumatic, 8 positions, e.g. for top edge rounding Rounding unit ..... > Position: horizontally bottom Kedpfx Acjx H Al Neisdn > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment: mechanically linked with cross-cut saw. > Radial adjustment: pneumatically controlled On/Off electronic length stop ..... > Length: 4,500 mm 1st tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm, NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter hold, complete clamping length is counter-supported 2nd tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm, NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter hold, complete clamping length is counter-supported Transfer belt ..... For transfer of parts to longitudinal processing, including double-part separation before infeed to longitudinal processing. 1st profiling spindle (climb and conventional milling) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm, NC axis, infinitely adjustable > Radial adjustment travel: 80 mm, NC axis, infinitely adjustable > Spindle speed: 6,000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm > 2 feed rollers opposite to spindle, axially pneumatically controlled, 8 positions > Table plate pneumatically adjusted to tool diameter 2nd profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm, NC axis, infinitely adjustable > Radial adjustment travel: 80 mm, NC axis, infinitely adjustable > Spindle speed: 6,000 rpm ...

Kondisi: diremaj di bengkel (bekas), Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and thoroughly checked prior to delivery Technical Data Summary (Please enquire regarding any additional included accessories) Pos. 1: Crosscut Saw ----- > Electronic, horizontally adjustable crosscut saw (stepless) > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for saw cut identification > NC length stop, mounted on slot table included Positioning of the crosscut saw integrated into the control system. > Length: 3500 mm Pos. 2: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Kdsdpfevu Hfqex Acion Pos. 3: 1st Profiling Spindle (Climb and Conventional Milling) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially controlled pneumatically, 2 positions Sash bar guide consisting of: Guide rail at the fence (climb-milling spindle area), Sash bar support from above in the area of the vertical right profile milling unit and profiling spindle. Pos. 5: Horizontal Top Profile Milling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Additional Features ----- > Online capable > Rebating unit for tear-free rebating > Double part clamping kit > Return feed device for one-person operation: swivel belt > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Weinig type manufacturing program > Supplied without machining tools No original images yet available. Photos show a similar machine from our archive ----- Price for the above machine on request! ----- Option at extra charge: EUR 6,500.00 Note...

Kondisi: baik (bekas), WEINIG HYDROMAT H-23 10 SPINDEL MESIN DENGAN BALOK MIRING MEJA INFEED PENDEK 1: BAWAH 7,5 kW 2: KANAN 11 kW 3: KIRI 11 kW 4: KANAN 11 kW, DAPAT DIMIRINGKAN 30° 5: KIRI 11 kW 6: ATAS 11 kW 7: BAWAH 11 kW 8: ATAS 11 kW 9: BAWAH 11 kW 10: UNIVERSAL 11 kW, DAPAT DIMIRINGKAN 360° 80 m/menit + FEED ELEKTRIK 14 x ROLLER FEED ATAS YANG DIGERAKKAN 7 x ROLLER FEED DASAR YANG DIGERAKKAN PELUMASAN MEJA OTOMATIS ROLLER TEKAN SAMPING DIGERAKKAN PNEUMATIK PENEKAN ATAS DIGERAKKAN PNEUMATIK DI 7+9 DIMENSI: KIRA-KIRA 5400 x 2000 x 1800 mm BERAT: KIRA-KIRA 7500 KG PENUTUP DEBU: 10 x DIAMETER 140 MM RUANG PEREDAM SUARA TERMASUK Kdsdpfxsycvfmj Acion

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Unicontrol 12 Consisting of: Cross-cutting unit (Pos. A), Tenoning and slotting spindle (Pos. C), Transfer conveyor (Pos. I), Profiling spindle (Pos. L), Profiling spindle (Pos. N), Vertical profiling mill right (Pos. P) For the production of individual parts and components, either frame-based or in series production. Comprises a cross machining unit and a longitudinal machining unit connected by a transfer conveyor. Working width: 40-140 mm (see pressure fence left 40 - 140 mm) Working height: 40-120 mm Kdjdpeumci Sjfx Acijn Workpiece length min.: approx. 275 mm + 1 x end profile length Longitudinal machining: approx. 220 mm + 2 x end profile length Max. workpiece length: 3500 mm The dimensions of the parts depend on the machine configuration, type of production, and tooling setup. Final definition of part dimensions is only possible after receipt, review, and approval of the complete and final tooling layout drawings. Cross machining: Table feed motor power: 0.3 kW (0.4 HP) Feed speed when sawing, profiling, and in return preset: 3-25 m/min Vario table with (possible for studio/architectural window production) The clamping length of all tenoning and slotting spindles can be used without tool change gaps. Workpiece clamping by means of clamping bridge. Operated via a clamping cylinder installed under the table. Length stop NC controlled, mounted on the slotting table. Studio window device swivel angle max.: +/- 75° Minimum workpiece length for angled windows depends on the angle and timber width. Possible part dimensions for angled window production: Angle Max. Min. Working width Workpiece length +/-75° 80 mm 800 mm +/-70° 120 mm 490 mm +/-60° 240 mm 360 mm +/-90° 350 mm 185 mm For angles greater than 60°, only counter processing Commission not documented 1) NC angle adjustment automatic for angled part machining Tear-out protection via follow-up counter along the entire spindle length of the tenoning and slotting spindle for 90° machining. Manually trackable counter-timber strip for angled part machining. 2) Additional counter timbers

Kondisi: siap digunakan (bekas), Weinig Unicontrol 6 - Technical Data Summary The machine will be inspected at our facility in Oberkochen before delivery! Technical Data Summary (Please inquire about any additional included accessories.) Pos. 1: Crosscut Saw ----- > Number of tools: 1 pcs. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for cut line recognition CNC-controlled length stop ----- > Length: 3,600 mm > Electronic length stop including positioned crosscut saw Pos. 2: Tenon and Slot Spindle ----- > Number of tools: 3 (pneumatic stroke 2 x 100 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 – 92 mm > Spindle speed: 3,000 rpm > Max. tool swing diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 360 mm > Motor power: 11 kW Pos. 3: 1st Profiling Spindle (climb and counter-rotation) ----- > Position: vertical right > Number of tools: 1 pcs. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: 3 (pneumatic stroke 2 x 100 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 – 92 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 11 kW Kodpfoxtvgkjx Acisdn 2 axially indexed feed rollers opposite the profiling spindle for processing narrow, short parts (e.g., glazing bars). Glazing bar guidance comprising a glazing bar support rail from above in the area of the vertical right profiling unit and profiling spindle. Pos. 5: Horizontal Top Profiling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool swing diameter: 130 mm > Axial adjustment range: 52 mm, indexed to 2 positions > Radial adjustment range: 125 mm, indexed to 2 positions Pos. 6: 3rd Profiling Spindle (Hardware Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range: 90 mm, indexed to 3 positions > Radial adjustment range: 100 mm, indexed to 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing diameter: 210 mm > Motor power: 3.0 kW Further Features ----- > Electric feed height adjustment incl. mechanical digital display and manual feed beam clamping > Rebate device for chip-free rebating > Double workpiece package > Return conveyor for one-man operation: pivoting belt > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control / NEXUS Extraction connection diameters: ----- Crosscut saw: 80 mm Slot spindle: 140 mm Profile spindle 1....

Kondisi: bekas, Tahun pembuatan: 1997, abmessungen-gewicht-steuerung-weinig-unitec10-hu-20240611 Kdjdpfx Acsw I Db Hoisn

Kondisi: bekas, spindel_50mm_profilsystem Kdedpfjlf H S Aex Acijn

Kondisi: bekas, de-hu-it-lt-001 Ksdpelf H Suofx Aciedn

Kondisi: bekas, Tahun pembuatan: 1997, de1021 Kdsdpolf H Sqjfx Acijn

Kondisi: belum diuji (bekas), Tahun pembuatan: 2004, Spindle slotter 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm Control system: Weinig PC-Nexus # 6726 Weinig Unicontrol 12 CNC ----- Sale on behalf of a customer. Machine is connected and can be demonstrated. Includes used window tooling for Unicontrol 12, OERTLI, for various timber thicknesses. ----- Brief summary: ----- - 2 slotting spindles, each 640 mm long, CNC-controlled - Variotic system - 3 x profile spindles, each 400 mm long, CNC-controlled - Hardware spindle + grooving units, above and below - Includes used window tooling for Unicontrol 12, OERTLI, for various timber thicknesses and systems, programmed and commissioned (see attached PDF) Detailed description: ----- Cross-cut saw ----- Electronic cross-cut saw, horizontally infinitely adjustable Number of tools: 1 pc. Spindle speed: 3000–6000 rpm Spindle diameter: 40 mm Max. tool diameter: 400 mm Motor power: 3 kW Laser guide light for recognition of saw section Rounding unit ----- Position: horizontal below Motor power: 1 kW Spindle diameter: 20 mm Spindle speed: 9000 rpm Max. tool diameter: 130 mm Electronic length stop, length: 3500 mm ----- 1st tenoning and slotting spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800–4000 rpm Spindle diameter: 50 mm Max. tool diameter: 380 mm Motor power: 15 kW 2nd tenoning and slotting spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800–4000 rpm Spindle diameter: 50 mm Max. tool diameter: 380 mm Motor power: 15 kW 1st profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with top bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50 mm Max. tool circle diameter: 232 mm Motor power: 11 kW Kdsdpfx Acoyyqm Isisn 2nd profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with top bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50 mm Max. tool circle diameter: 232 mm Motor power: 11 kW 3rd profiling spindle ----- ...

Kondisi: belum diuji (bekas), Spindel mortise 1 pc. Number of milling units: 5 pcs. Spindle diameter: 50 mm Control: Weinig PC-Nexus Weinig Unicontrol 11 window manufacturing line with extensive tooling ----- Optionally available (for extra charge): - Weinig Univar 6 rebate machine (price on request!) - Götzinger PowerDrill drilling and milling center for windows and doors (price on request) Technical manufacturer description: ----- Item 1: Weinig Unicontrol 11 window line ----- Including existing tooling - IV 67 Wood and Wood-Alu - IV 77 Wood and Wood-Alu - IV 90 Wood Crosscut saw ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed electronically adjustable with brake 3,000-6,000 rpm. Max. tool diameter: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment pneumatically in 8 positions for top-edge rounding Horizontal bottom rounding unit ----- Motor with brake: 1.5 kW, spindle diameter: 20 mm, clamping length: 25 mm, speed: 9000 rpm Max. tool diameter: 130 mm Axial adjustment mechanically coupled with the crosscut saw Radial adjustment pneumatically controlled Tenon and mortise spindle ----- With hydraulically clamped counter bearing Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,800 rpm Max. tool diameter: 400 mm Tool clamping length: 640 mm Axial travel NC axis Default position below table: 5-10 mm Radial travel: fixed 1st profile spindle (conventional and climb milling) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool diameter min. 140 mm, max. 232 mm Tool clamping length: 400 mm with counter bearing Axial travel: 350 mm NC axis Radial travel: NC axis Default position below table: 5-10 mm 2 feed rollers opposite the spindle, axially pneumatically controlled, 8 positions Horizontal top profiling unit ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 9,000 rpm Max. tool diameter: 130 mm Pneumatic adjustment to 8 positions, axial and radial 2nd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool diameter min. 140 mm, max. 232 mm Tool clamping length: 400 mm with counter bearing Axial travel: 350 mm NC axis Radial travel: NC axis Default position below table: 5-10 mm Kdodpfxsy T R Tuj Acien Synchronized guiding rail with transom support bar 2 feed rollers opposite the spindle, axially pneumatically controlled, 8 positions Vertical profiling unit, right, end of the machine ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Tool diameter min. 112 mm, max. 210 mm Pneumatic adjustment to 8 positions, axial and radial Horizontal bottom profiling unit ----- Motor power with brake: 3 kW Spindle diameter: 40 mm Clamping length: 125 mm Spi...