Beli Weinig Hydromat 23 bekas (478)

Kondisi: baik (bekas), Tahun pembuatan: 1997, MOULDER LAMEL WEINIG HYDROMAT 22 BL Lebar kerja maksimum: 220 x 140 mm Djdpfx Abjxa Hlkohsun Diameter spindle: 50 mm Infeed: 30 kW (stasiun hidrolik terpisah) Panel listrik terpisah: P 2200 x L 600 x T 2000 mm Spindle 1: 5,5 kW Spindle 2: 5,5 kW Spindle 3: 7,5 kW Spindle 4: 7,5 kW Spindle 5: 7,5 kW Spindle 6: 11 kW Spindle 7: 15 kW Spindle 8: 37 kW Spindle 9: 7,5 kW Spindle 10: 7,5 kW Kandang baja dengan piston gas di atas mesin. Pompa eksternal untuk pelumasan sentral (untuk drum oli pelumasan 200 L) 5 europalet dengan suku cadang/alat/poros tambahan termasuk

Kondisi: bekas, Tahun pembuatan: 2000, Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Infeed table length: 2500 + 500 mm Feed motor: 3 kW Feed speed: 6–36 m/min 1 WEINIG Planing and Profiling Machine Unimat 23 E 6 spindles (including 2 on the right), powerful motors, EM 11 infeed magazine optional Working width: 20–230 mm Working height: 8–120 mm 1st spindle bottom 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 125–180 mm Rabbet facility incl. tool Hardened table insert in front of 1st bottom spindle 2nd spindle right 11.0 kW ----- Shared motor with left vertical spindle Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112–250 mm Max. tool diameter behind fence plane: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle left ----- Shared motor with 2nd spindle Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe before left spindle, incl. side pressure roller, spring-loaded 4th spindle right 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112–250 mm Max. tool diameter behind fence plane: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 5th spindle top 11.0 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Segmented pressure shoe before top spindle, adjustable to tool diameter and can be swung clear of tool, spring-loaded. 6th spindle bottom 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112–250 mm Max. profiling depth: 15 mm Axial adjustment: 45 mm Spindles general ----- All profiling spindles feature high concentricity. Lubrication points for axial spindle adjustment. Vertical spindle length: 170 mm Feed system ----- Motor with mechanical brake, 3 kW Steplessly adjustable mechanical feed 6–36 m/min. Infeed roller before 1st bottom tool pneumatically controlled (high/low) Durofer pointed tooth rollers (Weinig patented) with depth limiter and self-cleaning Axial adjustment of feed rollers in relation to the left spindle: 35 mm Extension of the floating axis in relation to left spindles to 150 mm Machine electrics ----- Operating voltage: 380–400–415 volts, 50 Hz. Machine frame, tables and fences ----- Infeed table 2.5 m long (incl. jointer bar) Aluminum table extension 0.5 m for infeed table, incl. jointer bar extension Manual Waxilit pump for table resin removal One driven rubber roller (spring-mounted in outfeed table) Pressure elements and guides Duodpfx Aowqr Rvjbhon ----- Top pressure rollers, pneumatically actuated Top pressure rollers can be swung away opposite right spindles for easy tool change Machine operation ----- Pressure shoe before top spindle with mechanical digital readout Discharge after top spindle with mechanical digital readout ATS/E system, automatic 2-axis positioning for spindle No. 3 and 4 Min. working height: 12 mm Electric height adjustment for top spindles and feed Centralized lubrication points at machine front Safety and sound...

Kondisi: sangat baik (bekas), working width 230 mm working height 160 mm 5 heads head arrangement: bottom/right/left/top/bottom spindle diameter 40 mm (last one 50 mm) manually adjustable jointer on the last spindle table rollers electric adjustment of the pressure beam variable feed speed up to 36 m/min Dujdpeqmmfuofx Abhsn chromed table pneumatic pressure on feed rollers

Kondisi: sangat baik (bekas), Tahun pembuatan: 1994, working width 230 mm working height 120 mm 5 heads Djdpopgu R Asfx Abhsun head configuration: bottom/right/left/top/bottom spindle diameter 40 mm heads adjustable in two axes stepless feed speed adjustment spindle speed 6000 rpm year of manufacture 1994

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: tidak berfungsi, nomor mesin/kendaraan: 88208, lebar kerja: 230 mm, tinggi penyerutan: 120 mm, diameter spindel: 40 mm, lebar perataan: 220 mm, tinggi kerja: 120 mm, lebar total: 220 mm, tinggi total: 120 mm, kecepatan spindel (min.): 6.000 rpm, diameter nosel ekstraksi: 150 mm, diameter poros mesin serut: 40 mm, arus masuk: 400 A, lebar meja: 230 mm, diameter poros pisau: 40 mm, Perlengkapan: rem mesin, Weinig Unimat 23 EL Mesin Perata & Profil dengan 9 Spindel, No: 88210 Tahun 1998. Dalam kondisi baik, dilengkapi dengan penutup keselamatan dan booth akustik suara & keselamatan. Tenaga motor bagus, B11, R11, L11, R11, L11, T11, B22 (Kepala Gergaji Belah), T11, B11 semua dalam kW. Meja infeed 2 m. Tekanan pneumatik pada rol pengumpan. Pompa lilin. Kecepatan pengumpanan 6-36 m/menit. Beberapa kepala perata sudah terpasang pada mesin. Lengkap dengan dokumentasi penuh. Bisa dilihat di The Old Basket Works, Lyng Road, Burrowbridge, Somerset TA7 0SG. Foto tersedia via WhatsApp. Duodpfxjx Elage Abhjn

Kondisi: sangat baik (bekas), planing width 230 mm feed via cardan shafts (7.5 kW) 10 cutter heads: 1 bottom 7.5 kW 2 right 7.5 kW 3 left 7.5 kW Dusdpfx Aeuldn Hjbhsn 4 right 7.5 kW 5 left 7.5 kW 6 top 7.5 kW 7 bottom 7.5 kW 8 top 7.5 kW 9 bottom 7.5 kW 10 universal 4 kW

Kondisi: baik (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 230 mm, tinggi penyerutan: 170 mm, diameter spindel: 50 mm, lebar perataan: 230 mm, tinggi kerja: 170 mm, daya motor pengumpan: 7.500 W, jenis penyesuaian ketinggian: listrik, diameter poros mesin serut: 50 mm, jumlah spindel: 8, frekuensi input: 50 Hz, Perlengkapan: kabin, rem mesin, 8 spindles, Working width: 230 mm, Working height: 180 mm, Spindle diameter: 50 mm, Feed: 7.5 kW / 6 – 36 m/min, Spindle arrangement: 1-Bottom (7.5 kW) - scoring spindle 2-Bottom (7.5 kW) 3-Right (11 kW) 4-Left (11 kW) 5-Top (11.0 kW) 6-Bottom (22.0 kW) 7-Bottom (7.5 kW) Dsdpfjr Axwnsx Abhoun 8-Top (7.5 kW) 8 powered rollers in table

Kondisi: baik (bekas), Tahun pembuatan: 2004, en-Weinig Unimat 23 EL Year of manufacture: 2004 Working width: 230 mm, working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake 2. Right spindle with independent 7.5 kW motor and spindle brake Speed 8,000 rpm with high-performance ball bearings, NC axis with frequency inverter, axial stops milled to 35 mm height 3. Left spindle with independent 7.5 kW motor, speed 8,000 rpm with high-performance ball bearings, NC axis with frequency inverter, radial pneumatic pressure guide for different workpiece widths up to 200 mm 4. Top spindle with 7.5 kW motor and spindle brake, speed 8,000 rpm with high-performance ball bearings, radial NC axis Pneumatic axial control, traverse path 40 mm, glass bead discharge, pneumatically sequenced. - Feed system with 4 kW motor and feed brake - Short piece processing package - UC-Matic package consisting of: PLC control, central motor starting, workpiece monitoring, control terminal, free-standing control cabinet, free-standing operator panel, magnetic interlock of safety hood - Enhanced sound insulation - Automatic dressing and feeding system for different workpiece lengths and widths Workpiece dimensions: Length: 400 – 3,500 mm (4,000 mm) Width: 40 – 200 mm Thickness: 20 – 100 mm Driven conveyor belt Belt width: 250 mm, transport length: 4,500 mm, additional light barrier for signal transmitter Weinig Hydro Fine Planer Uniplan 23 Year of manufacture: 2004 Working width: 230 mm, working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm 2. Top spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm, radial NC axis - First feed roller sequenced with photo sensors - NC axis for separate feed height adjustment Dujdpfx Abjwyulushen - Improved sound insulation - UC-Matic package - 2 Hydro straight cutter heads 501 with HSS planing knives 30 mm x 3 mm, max. 9,000 rpm, dimensions 163 mm x 230 mm x 50 mm, Z=4

Kondisi: bekas, Number of spindles: 6 pcs Working width: 230 mm Planing height: 120 mm Surfacing table length: 2500 mm Feed motor: 3 kW Feed speed: 5–24 m/min Total power requirement: 27 kW Dimensions (LxWxH): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig 4-Side Planer Profimat 23 Window Version with glazing bead cut-off or can be used as grooving spindle ATS control and program control ----- Machine completely factory overhauled by Weinig in 2024. Technical Data – Summary (possibly incl. additional accessories, please request) General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Surfacing table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5–24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx.: 2500 kg Spindle Configuration ----- > Spindle 1: bottom > Spindle 2: right, pneumatically actuated up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glazing bead saw, pneumatically up/down Spindle Details ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- Dujdpfx Aoxpn T Ujbhen > Glazing bead cutting device or can be used as grooving unit > ATS control, automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs > Operator interface: Window package Combined control of right spindle and glazing bead removal via manual selector switch on control panel > Spindles with mechanical digital display (Technical data as provided by manufacturer – no liability assumed!)

Kondisi: bekas, Working width: 230 mm Working height: 15–120 mm Number of spindles: 2 units Weinig Hydro Planing Machine Type Uniplan 23 ----- Machine fully factory-reconditioned by Weinig in 2024. Description: For double-sided horizontal wood processing with 2 working spindles. Dujdexpn Tzjpfx Abhjn Spindle arrangement: horizontal, bottom and top. Both horizontal spindles are equipped with hydraulically tensioned counter-bearings, without axial adjustment. Built-in straight jointer on both spindles with automatic stone advance, remote-controlled with guard closed. Machine with continuous, chainless feed equipped with rubber rollers. Electrical height adjustment of the spindles, displayed via mechanical digital indicator (SIKO). Limit switch to restrict height adjustment. Pneumatic feed roller pressure. Stops and table plates non-adjustable. Machine equipped with steel table plates. Machine with full enclosure and integrated noise and dust protection incl. internal lighting. Electrical configuration in accordance with DIN VDE 0113, electrical equipment for industrial machines EN 60204, IEC 204-1. Other electrical regulations not considered. Machine delivered with operator tools, but without machining tools. The spindles of the Weinig Uniplan run at a speed of 7,200 revolutions per minute. Before use, please check if your tools are suitable for this spindle speed. Please also observe this when ordering new tools. Technical Data: Max. working width: 230 mm Min. working height: 15 mm, max.: 120 mm Feed motor: 3 kW (4 hp) Horizontal spindles: each 7.5 kW (7.5 hp) Feed speed, stepless: 6–36 m/min Spindle speed: 7,200 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Max. tool cutting circle: 163 mm Fixed clamping removal below: 0.5 mm (Technical data according to manufacturer – subject to change!)

Kondisi: bekas, 001 Duodpjxpn Tuofx Abhen

Kondisi: baik (bekas), Tahun pembuatan: 1985, WEINIG HYDROMAT 22B Perangkat masukan otomatis Weinig, tipe: EM2 Duodsxbn T Ejpfx Abhon Lebar kerja maksimum: 220 x 140 mm Diameter spindle: 50 mm Mesin infeed: 7,5 kW Konfigurasi spindle: 1. Bawah 7,5 kW 2. Kanan 7,5 3. Kiri 7,5 4. Atas 18,5 5. Bawah 30 6. Bawah 11 7. Atas 11 Kecepatan masukan: 5 - 60 m/menit (kontrol frekuensi) Masukan: Kardanik, dengan 5 rol penggerak tertanam di meja Banyak kepala/alat termasuk

Kondisi: bekas, kecepatan pemakanan sumbu X: 60 m/menit, daya motor pengumpan: 18.000 W, Penyuapan hidrolik untuk Weinig Hydromat. Kecepatan maksimum penyuapan 60 m/menit. Dusdsxwb I Ispfx Abhon

Kondisi: sangat baik (bekas), Mesin serut empat sisi WEINIG Unimat 23 E Lebar maksimal penyerutan 230 mm, Tinggi maksimal penyerutan 130 mm, 5 spindle, Dedpfx Aexvc Uaebheun Pengaturan manual dimensi penyerutan, Konfigurasi spindle: bawah 7,5 kW; kiri dan kanan 11 kW; atas 11 kW; bawah 7,5 kW, Motor dengan rem, Diameter spindle 40 mm, Semua spindle dapat diatur penuh, Mesin dilengkapi 4 rol penarik di meja, cocok untuk kayu basah, Feed melalui poros kardus dengan pengaturan kecepatan variabel Mesin ditawarkan beserta kepala potong yang terlihat pada spindle, Poros kardus tidak aus, meja tidak baret, operasi halus tanpa getaran, Serut sangat kokoh, kondisi asli, berat sekitar 5 ton. Kondisi sangat bagus, semua berfungsi dengan baik.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Four-Sided Planer and Moulder Manufacturer: Weinig Model: U 23 EL Year of manufacture: 1999 Number of spindles: 8 Working width: 20 – 230 mm Working height: 8 – 120 mm Infeed table length: 2,500 mm Feed motor: 4 kW Feed speed: 4 – 24 m/min Total connected load: Approx. 60 kW 1st spindle: Bottom, horizontal 7.5 kW, 50 mm diameter, 8,000 rpm, tooling diameter: 125 – 180 mm 2nd spindle: Right, vertical 7.5 kW, 50 mm diameter, 8,000 rpm, tooling diameter: 112 – 250 mm 3rd spindle: Left, vertical 7.5 kW, 50 mm diameter, 8,000 rpm, tooling diameter: 112 – 200 mm 4th spindle: Right, vertical Dsdpfx Asvy Ebuebhoun 7.5 kW, 50 mm diameter, 8,000 rpm, tooling diameter: 112 – 250 mm 5th spindle: Top, horizontal 7.5 kW, 50 mm diameter, 8,000 rpm, tooling diameter: 112 – 200 mm 6th spindle: Bottom, horizontal 7.5 kW, 50 mm diameter, 7,200 rpm, tooling diameter: 112 – 250 mm 7th spindle: Top, horizontal 7.5 kW, 50 mm diameter, 7,200 rpm, tooling diameter: 112 – 250 mm 8th spindle – Saw unit: Top, horizontal 2.2 kW, 40 mm diameter, 8,000 rpm, tooling diameter: 180 mm Includes two feed tables.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Planer and Moulder Dujdpjv Id Ngjfx Abhjn Manufacturer: Weinig Model: Profimat 23 Year of manufacture: 1995 Working width: 230 mm Working height: 120 mm Surfacing table length: 2,000 mm Spindle speeds: 6,000 rpm Spindle diameter: 40 mm Feed speed: 4 - 24 m/min Number of spindles: 6 Grooving saw: Yes Spindle arrangement: B-T-R-L-T-B-Grooving saw 1st spindle, Bottom, 7.5 kW 2nd/3rd spindle, Right, Left, 7.5 kW each 4th spindle, Right, 7.5 kW 5th spindle, Top, 7.5 kW 6th spindle, Bottom, 4.6 kW Grooving saw: 2.2 kW Dimensions: approx. 4,500 x 2,000 x 1,800 mm Weight: approx. 3.5 t

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, diameter spindel: 40 mm, lebar kerja: 230 mm, kecepatan pemakanan sumbu X: 5 m/menit, laju pemakanan gandar Y: 36 m/menit, lebar perataan: 20 mm, jenis penyesuaian ketinggian: listrik, tinggi penyerutan: 160 mm, tinggi kerja: 8 mm, Perlengkapan: kabin, rem mesin, de Djdjv A Rpcjpfx Abhoun

Kondisi: bekas, Tahun pembuatan: 2002, Mesin planer empat sisi Weinig lebar planing maks. 230mm tinggi planing maks. 120mm Posisi digital Dsdpfxjxg Nbus Abhsun 5 stasiun + 1 unit keluaran untuk pembulatan atau chamfer Total daya 43 kW 380V

Kondisi: bekas, Number of spindles: 6 pcs Working width: 230 mm Planing height: 120 mm Surfacing table length: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min Total power requirement: 27 kW Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight approx: 2500 kg Weinig Profimat 23 four-sided planer, window version with glass bead cutting, or can be used as a grooving spindle ATS control and program control --- Machine is currently being overhauled and function-tested Duodpfx Abeu Su Huohon Technical data summary (For any additionally included accessories, please enquire) --- General --- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs > Surfacing table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx: 2500 kg Spindle configuration --- > Spindle 1: bottom > Spindle 2: right, pneumatically controlled up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glass bead saw, pneumatically controlled up/down Spindle specifications --- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional features --- > Glass bead separation or can be used as a grooving device > ATS control: automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs > Machine operation: window package - Shared control of the right spindle and glass bead removal via manual selector switch on the control panel > Spindles with mechanical digital readout Option: Used planing heads (Technical data according to manufacturer - no liability assumed!)

Kondisi: sangat baik (bekas), Four-side planer Weinig Profimat 23 Dedpfx Aov Ealrobhoun Working width: 230 mm Working height: 120 mm Number of spindles: 6 Bottom spindle: 4 kW Right spindle: 7.5 kW Left spindle: — Top spindle: 7.5 kW Lower spindle: 4 kW Universal spindle: 5.5 kW Spindle diameter: 40 mm Feed speed: 24 m/min Pneumatic pressure rollers Electric adjustment of pressure wheels Cardan shaft drive CE certificate

Kondisi: sangat baik (bekas), Four-sided planer Weinig Unimat 23 Working width: 230 mm Working height: 140 mm Number of spindles: 7 Spindle arrangement: Bottom: 7.5 kW Right: 7.5 kW Left: 7.5 kW Right: 7.5 kW Top: 7.5 kW Bottom: 7.5 kW Universal 360°: 7.5 kW ATS control system Ribbed table Powered feed rollers in the worktable Feed via cardan shafts Dedpfjrup Igjx Abheun Feed motor: 5.5 kW Feed speed: 6-36 m/min Total power: 61 kW

Kondisi: sangat baik (bekas), Four-sided planer Weinig Unimat 23 EL Working width: 230mm Working height: 160mm Spindle configuration: Bottom: 5.5 kW Right: 4 kW Left: 5.5 kW Right: 4 kW Top: 11 kW Bottom: 5.5 kW Top: 7.5 kW Bottom: 7.5 kW Variable feed speed via variator: 6-36 m/min Feed driven by cardan shaft Dusdpfsrb An Ujx Abhjn Table with powered rollers Pneumatic pressure elements CE certificate Year of manufacture: 2003

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, tinggi penyerutan: 170 mm, diameter spindel: 40 mm, lebar perataan: 230 mm, pl-hu-001 Duedjw H Smhepfx Abhsn

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 5.300 mm, kecepatan pemakanan sumbu X: 60 m/menit, lebar kerja: 230 mm, diameter spindel: 180 mm, tinggi kerja: 160 mm, daya motor pengumpan: 9.000 W, kecepatan spindel (maks.): 6.000 rpm, jenis penyesuaian ketinggian: listrik, jumlah spindel: 6, daya: 127 kW (172,67 hp), arus masuk: 241 A, diameter rol pengumpan: 140 mm, Perlengkapan: rem mesin, Vollständige und betriebsbereite Hobelanlage Hydromat 3000 mit Spaltbeil. Ideal für die automatisierte Produktion von Fassaden- und Bodenprofilen sowie Dachlatten. Die Linie besteht aus Beschickung mittels Abstapel- und Schrägstelltisch, werkstückweiser Zuführung zum Hobelautomaten, Minibündelstation, Kappen und automatischer Stapelung zur Paketeinheit. Das fertige Paket wird automatisch auf ein Puffer-Förderband für die Umreifung mit PET-Band abgesenkt. Die Linie steht aufgrund einer Kapazitätserweiterung zum Verkauf. Duedsrk Nklspfx Abhon Weitere Informationen zur Linie auf Anfrage.

Kondisi: bekas, Weinig Unimat 23 Technical Data Working width: 30 - 230 mm Duedpfx Asncc Igsbhen Working height: 19 - 200 mm mounted on platform u- re-li-o-u.o without infeed machine only The machine has been dismantled and is immediately available Transport can be organised