Beli Jendela Dijual bekas (4.041)

Tahun pembuatan: 2020, Kondisi: sangat baik (bekas), Emmegi Classic Magic Rodpfoy U Tczex Amuou Elektronische Doppelgehrungssäge Doppelkopf‑Säge für Aluminium- und PVC-Profile, mit NC‑gesteuertem Gleichstrommotor für die automatische Bewegung des beweglichen Sägekopfs. Sämtliche Winkel pneumatisch einstellbar bis zu 22°30’ außen. Hauptmerkmale Sägeblatt: Ø 450 / 500 mm, Hartmetall bestückt Schnittlänge: 5 m Nutzschnitt Gehrungsbereich: 90° bis 22°30’ außen (pneumatische Verstellung) Positionierung: Direktes Magnetbandsystem zur Längenmessung Steuerung: Alphanumerisches Fluoreszenzdisplay (2 × 40 Zeichen) Speicher: - 99 Profilkorrekturwerte (automatische Winkelerrechnung) - 20 Schnittlisten (je 50 Positionen) über Tastatur - 10 Schnittlisten (je 100 Positionen) über USB (PC) Anschlüsse: USB-Schnittstelle, RJ45-Netzwerkkarte; Etikettendrucker vorbereitet Spannung: Pneumatische Horizontal-/Vertikalspannzangen mit Niederdruckeinrichtung Sicherheit: Pneumatische Vollschutzhauben für den Schnittbereich Kühlschmierung: Wassersprüheinrichtung (Ölemulsion oder Minimalmengenschmierung) Technische Daten Motoren: 2 × 2,2 kW (400 V); Gesamtleistung 5,3 kW Schnittgeschwindigkeit: 2.800 U/min Betriebsdruck: 6–8 bar; Luftverbrauch 15 NL/Zyklus Abmessungen (5 m-Ausführung): 9.400 × 1.080 × 1.840 mm (L×T×H) Gewicht: ca. 1.500 kg Einsatzgebiete Präzisionsschnitte von Aluminium- und PVC-Profilen für Fenster, Türen, Fassadenelemente und Leichtmetallverarbeitung.

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Elumatec 130 Pusat pemesinan 3-sumbu dengan penukar alat otomatis 8-stasiun untuk profil aluminium atau PVC Jarak gerak maksimum sumbu X: 4200 mm Jarak gerak maksimum sumbu Y: 480 mm Jarak gerak maksimum sumbu Z: 325 mm Rjdpfx Aoy U Dtqjmuou Kecepatan dapat disesuaikan secara kontinu hingga 6.000 rpm unit kontrol genggam penyemprotan jumlah minimum Kepala sudut dua arah dan spindle kecepatan tinggi Pengukuran dengan kunci 8 penjepit material pneumatik Pengaman cahaya (light barrier) Kondisi sangat baik

Kondisi: bekas, 2 slot spindles Number of milling units: 5 Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 NC window processing line, optionally with extensive tooling ----- Options available (with extra cost) IV 68 wood, wood/aluminium IV 78 wood, wood/aluminium IV 68 front doors Rodpfx Amjzawizouou Technical manufacturer description: ----- Item 1: Weinig Unicontrol 10 NC window processing line ----- Cut-off saw ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed electronically adjustable with brake 3,000-6,000 rpm. Maximum tool diameter: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment pneumatically in 8 positions for edge rounding from above Horizontal corner rounding unit (bottom) ----- Axial movement mechanically connected to the cut-off saw 1st tenoning & slotting spindle ----- Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool diameter: 400 mm Tool clamping length: 640 mm Axial movement: NC axis Base position below table: 5-10 mm Radial movement: fixed 2nd tenoning & slotting spindle ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool diameter: 400 mm Tool clamping length: 320 mm Axial movement: NC axis Radial movement: NC axis Base position below table: 5-10 mm 1st profile spindle (climb & counter-rotation) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool diameter: 140 mm Max. tool diameter: 232 mm Clamping length: 400 mm with counter support Axial movement: 350 mm, NC axis Radial movement: NC axis Base position below table: 5-10 mm 2nd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool diameter: 140 mm Max. tool diameter: 232 mm Clamping length: 400 mm with counter support Axial movement: 350 mm, NC axis Radial movement: NC axis Base position below table: 5-10 mm Horizontal profiling unit (top) ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Max. tool diameter: 130 mm Adjustment pneumatically in 8 axial and radial positions 3rd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool diameter: 140 mm Max. tool diameter: 232 mm Clamping length: 400 mm with counter support Axial movement: 350 mm, NC axis Radial movement: NC axis Base position below table: 5-10 mm Vertical profiling unit, right at machine end ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Max. tool diameter: 210 mm Adjustment pneumatically in 8 axial and radial positions Further accessories -----...

Tahun pembuatan: 2024, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang total: 700 mm, lebar total: 950 mm, tinggi total: 2.000 mm, tegangan masuk: 230 V, frekuensi input: 50 Hz, Tersertifikasi DGUV hingga: 07/2027, jenis arus masuk: AC (pendingin udara), SB-950 Redpfxeytl The Amuou

Kondisi: bekas, Tahun pembuatan: 2000, Lokasi gudang: Nattheim Rsdpfxjvwdmwj Amuju

Kondisi: bekas, Tahun pembuatan: 2004, Slotting spindle 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm # 6726 Weinig Unicontrol 12 CNC ----- Sale on behalf of customer. Machine connected and available for demonstration. Including used window tooling for Unicontrol 12, OERTLI, various wood thicknesses ----- Brief summary: ----- - 2 slotting spindles, each 640 mm long, CNC controlled - Variotisch - 3 profiling spindles, each 400 mm long, CNC controlled - Fitting spindle + grooving units, top and bottom - Includes used window tooling for Unicontrol 12, OERTLI, various wood thicknesses and systems programmed and set up (see attached PDF) Detailed description: ----- Crosscut saw ----- Crosscut saw electronic, stepless horizontal adjustment Number of tools: 1 pc. Spindle speed: 3000-6000 rpm Spindle diameter: 40 mm Maximum tool diameter: 400 mm Motor power: 3 kW Laser alignment light for identifying the saw section Rounding unit ----- Position: horizontal, below Motor power: 1 kW Spindle diameter: 20 mm Spindle speed: 9000 rpm Maximum tool swing diameter: 130 mm electronic length stop, length: 3500 mm ----- 1st tenoning and slotting spindle ----- Number of tools: variable, CNC controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50 mm Rodpsyyqm Isfx Amuju Maximum tool diameter: 380 mm Motor power: 15 kW 2nd tenoning and slotting spindle ----- Number of tools: variable, CNC controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50 mm Maximum tool diameter: 380 mm Motor power: 15 kW 1st profiling spindle ----- Position: vertical right Number of tools: variable, CNC controlled Tool clamping length: 400 mm with top bearing Vertical spindle stroke: variable, CNC controlled Horizontal spindle stroke: variable, CNC controlled Spindle speed: 6000 rpm Spindle diameter: 50 mm Maximum tool swing diameter: 232 mm Motor power: 11 kW 2nd profiling spindle ----- Position: vertical right Number of tools: variable, CNC controlled Tool clamping length: 400 mm with top bearing Vertical spindle stroke: variable, CNC controlled Horizontal spindle stroke: variable, CNC controlled Spindle speed: 6000 rpm Spindle diameter: 50 mm Maximum tool swing diameter: 232 mm Motor power: 11 kW 3rd profiling spindle ----- Position: horizontal top...

Kondisi: bekas, Tahun pembuatan: 1994, Technical details: Air pressure required: 8 bar Rjdju Icyhopfx Amuou Total power requirement: 14 kW Machine weight approx.: 80–170 kg per machine MULTIFUNCTIONAL PUNCHING AND DRILLING MACHINE, ideally suited for aluminium window construction. 3 units: - For Schüco aluminium window frame, mullion, and transom profiles S65 - For Schüco aluminium window sash profiles, Royal system S55, S65, and S70 - For Schüco aluminium door profiles, Royal S65 door base profiles - Foot-operated control - Compressed air gun A N D DRILLING MACHINE Application: - Drilling machine for door hinges - Drill holders: for 8 units; 6 countersink drills to be used with Ø = 11/15mm, approx. 80mm length - Tool clamping is done via foot pedal, drilling is performed manually - Accessories: various attachments.

Tahun pembuatan: 1998, Kondisi: bekas, Technical details: Profile width: 50 mm Working height: 950 mm Interface: RS 232 Pinout Window profile processing machine Suitable for materials such as PVC, aluminium and wood windows in a continuous processing operation. Materials are conveyed via a pneumatic transport and clamping system. The system consists of two workstations (machines), one electrical control cabinet, an operator panel, and transport units. Also included are a stand with a vibrating transport system, chip conveyor unit, and a stand with acknowledgement printer. Our photos are shown first at the current location, followed by additional photos demonstrating the system prepared for transport and for sale. Workstation No. 1 (Machine 1): - Sawing station with saw blade Ø 400 x 4.5mm - Drilling unit with collet chuck (vertical, upward) - Drilling unit with collet chuck (horizontal) - Drilling unit with collet chuck (vertical, downward) - Twin drilling unit with collet chuck (vertical, downward) - 45° drilling unit with collet chuck (upward) Workstation No. 2 (Machine 2): - Drilling unit with collet chuck for screw connections (vibratory bowl) (vertical, upward) - Horizontal milling spindle with 11 disc cutters - Triple drilling unit with collet chuck (vertical, downward) - Triple drilling unit with collet chuck (vertical, upward) - Triple drilling unit with collet chuck (horizontal) Rjdpfx Ameu Ibuwjueu 2 motor-driven transport units: - LxWxH: 5,650 x 2,400 x 1,000 mm - Track width 1,980 mm 2 motor-driven transport units: - LxWxH: 2,150 x 2,750 x 1,050 mm - Track width 2,300 mm

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 5 pcs. Spindle diameter: 50 mm Weinig Unicontrol 11 window production line with comprehensive tooling ----- Optionally available (at extra cost): - Weinig Univar 6 rebate machine (price on request) - Götzinger PowerDrill drilling and milling center for windows and doors (price on request) Technical Manufacturer Description: ----- Pos. 1: Weinig Unicontrol 11 window production line ----- Including existing tools - IV 67 wood and wood-aluminium - IV 77 wood and wood-aluminium - IV 90 wood Crosscut saw ----- With laser guide light, motor power 3 kW, spindle diameter 40 mm, Spindle speed electronically adjustable with brake, 3,000–6,000 rpm. Max. tool diameter: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, 8 positions for top edge rounding Horizontal bottom rounding unit ----- Motor with brake: 1.5 kW, spindle diameter 20 mm, clamping length 25 mm, Speed: 9,000 rpm Max. tool diameter: 130 mm Axial adjustment mechanically coupled with the crosscut saw Radial adjustment pneumatically controlled Tenoning and slotting spindle ----- With hydraulically clamped counter bearing Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,800 rpm Max. tool diameter: 400 mm Tool clamping length: 640 mm Axial adjustment: NC axis Rodjy T R Tuspfx Amueu Default position below table: 5–10 mm Radial adjustment: fixed 1st profiling spindle (climb and counter-rotation) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool diameter min. 140 mm, max. 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment 350 mm (NC axis) Radial adjustment NC axis Default position below table: 5–10 mm 2 feed rollers opposite spindle, axially pneumatically controlled, 8 positions Top horizontal profile milling unit ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 9,000 rpm Max. tool diameter: 130 mm Pneumatic adjustment to 8 positions axially and radially 2nd profiling spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool diameter min. 140 mm, max. 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment 350 mm (NC axis) Radial adjustment NC axis Default position below table: 5–10 mm Indexed guiding fence with glazing bar support rail at the stop 2 feed rollers opposite spindle, axially pneumatically controlled, 8 positions Right vertical profiling unit at end of machine ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Tool diameter min. 112 mm, max. 210 mm Pneumatic adjustment to 8 positions axially and radially Bottom horizontal profile milling unit ----- Motor power with brake: 3 kW Spindle diameter: 40 mm Clamping length: 125 mm Spindle speed: 5,850 rpm Tool...

Kondisi: bekas, Slot spindle 1 0 Number of milling units: 2 pcs. Spindle diameter: 40, 50 mm Pos. 1: Okoma angle combination UF1 S and Pos. 2: Profile wrapping machine UF2 EG including Pos. 3: Tooling for IV78 wood, IV78 wood front doors, IV78 wood-aluminium windows Gutmann with straight and angled cheek For sale on behalf of customer --- Technical manufacturer’s description: Pos. 1: Okoma UF 1 S slotting and profiling machine - Profile wrapping machine --- Compact, heavy-duty window production unit in cast construction, consisting of: Crosscut saw operating from above with 12-position turret stops, positively guided saw guard for accident prevention Slot spindle 40 mm diameter x 252 mm, double stroke for 3 tool positions (stroke height 83 mm), 7.5 kW motor Roller table adjustable on both sides 0-60 degrees automatic feed with various infinitely adjustable speeds, double pneumatic clamping, length stop LAS 3-way system 2300 mm Redpsy T R Tbofx Amusu automatic transfer to profiling unit profiling spindle 40 mm diameter x 252 mm pneumatic stroke 112 mm (adjustable) for 2 tool positions 7.5 kW motor, spindle horizontally adjustable to tool run-off edge front milling fence jaw adjustable glazing bead saw with 3 kW motor with 4-position turret head setting, heavy-duty articulated feed, infinitely adjustable 0-25 m/min, roller groups swiveling inwards and outwards stop with 5-position turret head frame milling device --- Pos. 2: OKOMA Profile Wrapping Machine Model UF 2 EG --- Energy data: - Operating voltage: 3-phase, 380 V, 50 Hz - Compressed air: air demand: 13 NL/cycle, pressure: 8 bar treated air: as per Pneurop 6611 1. Profiling spindle 1: - Spindle arrangement: right - Power: 11 kW - Speed: 7000 rpm - Direction of rotation: climb and counter-rotation - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - ‘U’ movement of profiling spindle - Vertical positioning Drive: pneumatic cylinder 90 mm stroke for 3 tool positions Position indicator: limit switch - Horizontal positioning Drive: pneumatic cylinder forward-back Position indicator: limit switch - Automatic plunge: Plunge speed adjustable for clean profiling - Safety/extraction hood with connection spigot 140 mm diameter 2. Profiling spindle 2: - Spindle arrangement: right - Power: 11 kW - Speed: 7000 rpm - Direction of rotation: counter rotation - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - ‘U’ movement of profiling spindle - Vertical positioning Drive: pneumatic cylinder 90 mm stroke for 3 tool positions Position indicator: limit switch - Horizontal positioning Drive: pneumatic cylinder forward-back Position indicator: limit switch - Safety/extraction hood with connection spigot 140 mm diameter 3. Fitting milling device EG: - Spindle arrangement: right - Drive: three-phase motor 3 kW - Speed: 6000 rpm - Spindle diameter: 30 mm - Usable length: 47 mm - Vertical positioning: none - Horizontal positioning Drive: pneumatic cylinder forward-back Position indicator: limit switch (rear only) - Safety and extraction hood with connection port 80 mm diameter Stop: - 1st stop: in front of spindle 1, manual chip removal, quick adjustment via parallelogram - 2nd stop: between spindles ...

Kondisi: baru, Maximum workpiece length: 3,800 mm Milling spindle: 1 piece Main motor: 15 kW Controller: Maestro active windoor Windor NT 1 ANGULAR MACHINING CENTER FOR WINDOW AND DOOR PRODUCTION --- Rjdpjy T R S Rofx Amusu Manufacturer’s Short Description: Windor NT1 is the angular machining center for the production of windows and doors. Despite its compact dimensions, it is capable of performing all processing steps such as cross-cutting, tenoning, boring, milling, and profiling. It operates completely independently of design concept, joint type, cross-section, etc. --- Technical Manufacturer Description: Position "1": Cross-Cut Saw Unit Features: - Motor power: 4 kW (5.5 HP) - Speed: 3,000 rpm - Max. tool diameter: 400 mm - Saw blade bore: 80 mm / Flange diameter: 100 mm - Pneumatic vertical positioning ON/OFF - 1 extraction port, diameter: 160 mm Position "2": Tenoning and Slotting Unit Features: - Heavy-duty spindle, diameter: 50x320 mm - Motor power: 7.5 kW (10 HP) - Speed: 3,500 rpm - Max. tool diameter: 320 mm - Max. tenon depth: 105 mm - Axial stroke below table: +15/-300 mm - Automatic anti-splinter device "Jolly" - Maximum tenon angle: ± 60° - Vertical positioning through M.C. brushless motors - Left-hand rotation - 1 extraction port, diameter: 200 mm Position "3": Profile Milling Unit Features: - Heavy-duty spindle, diameter: 50x320 mm - Motor power: 7.5 kW (10 HP) - Speed: 6,000 rpm - Min./max. tool diameter: 130-240 mm - Axial stroke below table: +15/-300 mm - Vertical positioning through M.C. brushless motors - Pneumatic horizontal positioning ON/OFF with 5-position turret stop (standard, if option 99.06.62 is not installed) - Right-/left-hand rotation - Climb cutting function for anti-splinter protection during rebating Position "4": Profile Milling Unit Features: - Heavy-duty spindle, diameter: 50x320 mm - Motor power: 7.5 kW (10 HP) - Speed: 6,000 rpm - Min./max. tool diameter: 130-240 mm - Axial stroke below table: +15/-300 mm - Vertical positioning through M.C. brushless motors - Pneumatic horizontal positioning ON/OFF with 5-position turret stop (standard, if option 99.06.62 is not installed) Position "5": "DUO" Unit Shadow groove unit complete with: - Spindle diameter: 50 mm - Spindle length: 3 mm - Speed: 9,000 rpm - Tool diameter: 154 mm Unit for glazing bead cutting and/or hardware milling with: - Spindle diameter: 30 mm - Spindle length: 35 mm - Speed: 6,000 rpm - Max. tool diameter: – Saw blade for glazing bead cutting: 200 mm – Tool for hardware milling: 240 mm Common features: - Pneumatic angle rotation with 2 positions: 0°-90° - Pneumatic in/out of operation ON/OFF with 5-position turret stop - Manually operated axial positioning - 1 extraction port, diameter: 160 mm --- Maestro active windoor The machine control is organized on two levels. The first level comprises an industrial numerical control from BECKHOFF, which executes all SPS control functions. The second level is an industrial PC, the "eye-M evo" console, which serves as the interface between operator and machine.

Kondisi: bekas, Tahun pembuatan: 2011, Länge 5000 mm Breite 100 mm Höhe 2800 mm Baujahr 2011 Range+Heine paint finishing line For the coating of individual wood window parts and frames Being sold on behalf of a customer Technical Manufacturer Description: Part dimensions: Length: 5,000 mm Height: 2,800 mm Width: max. 100 mm Coating system: Designed for use with coatings from the respective manufacturer with a low solvent content (VOC value), water-based and non-flammable. Capacity: min. 40 rails/shift, i.e. approx. 60 window units/shift (without forced drying) Process (one cycle is run through twice): - Flooding - Drying Rodpfxsy Ty E Ho Amuou - Inspection, sealant application - Spraying - Drying Pos 1 Conveyor Technology 1 Power + Free circular conveyor Layout as per drawing 11-138-010a Essentially consisting of: 3 drives with geared motors for main chains with frequency-controlled speed (see layout). Various track rails, horizontal bends, chain tensioning stations, pneumatically/electrically controlled stop stations 50 rails, 5,000 mm long (max. load 250 kg) Automatic tilting of rails for drainage after the flooding unit 1 conveyor control system (Siemens S7-300 PLC) Programmable buffer stock Continuously variable drive units 1 lifting/lowering station for loading/unloading of workpieces (max. stroke 2,000 mm) 1 steelwork set for fastening the conveyor system Pos 2 Flooding Unit 1 flowcomat II-P 1 unit for clear priming Maximum workpiece width: approx. 180 mm Consisting of: 1 coating tunnel, 1 Flowcodrive swivel mechanism, 2 flooding lances, each equipped with max. 3 nozzles 1 cleaning accessories set 1 externally mounted stainless steel sieve 1 paint supply 1 control system Pos 3 Additions to Flooding Unit 1 drain channel and surface in the flash-off area behind the flooding unit After flooding, the rails move into a drip buffer. The dripping coating material is collected on the PP non-stick collection surface (and channel) and returned to the flooding unit. Rinse water is collected in the flooding unit and pumped out. The use of PP in paint-contact areas allows for easy cleaning of dried-on coatings. 1 humidification unit 1 control unit for the humidifier, complete with controller for humidification volume 1 hygrostat for detecting ambient humidity and activating humidification nozzles 3 humidification nozzles for the drip buffer 1 coagulation unit 1 R+H WACO 200 coagulator – 200 l collection tank Pos 4 Top Coat Spray Booths 2 spray booths for top coat application 2 extraction walls with sandwich panel cladding as per work area Fan: 16,000 m³/h Filter area: -3 sets of Ecola pre-separators -1 set Paintstop filters -1 set bag filters Recirculating air distribution ceiling in tension frame design Volume: 12,000 m³/h approx. 75% recirculating air – 25% exhaust air operation (extracted from the production hall) Installed on site-specific foundation as per layout 2 Prolac overspray recovery columns Pos 5 Additions to Top Coat Spray Booths 3 humidification nozzles for the flash-off area after top coating

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Paket lengkap terdiri dari: Konveyor gantung bi-rail dengan dukungan batang dua titik, unit pengangkat dan rotasi. Ruang semprot untuk robot dengan sirkulasi penuh, dilengkapi sistem penggantian pre-filter otomatis. Humidifier tekanan tinggi untuk ruang semprot dan ruang flash off. Sistem semprotan robotik untuk jendela dengan unit pembersih nosel jaket, pergantian warna otomatis (3 independen), sistem keamanan elektrostatis, dan flow meter cat. Terowongan pengering dengan sistem LDP dan kipas aksial. Sistem pengawas dengan antarmuka data dan pembaca datamatrix. Peralatan sudah dikemas untuk transportasi. Sudah pernah dipasang sebelumnya, namun belum pernah dioperasikan. Redpfxoxw Ux He Amueu

Kondisi: bekas, Tahun pembuatan: 1993, Peralatan IV 68, 78 dan perlindungan bangunan bersejarah. Spindel bor dan slot untuk 3 alat, motor 7,5 kW. Spindel profil untuk 3 alat, motor 5,5 kW. Rodpfx Asy Hrrxomusu

Kondisi: baik (bekas), Tahun pembuatan: 2005, EMCOMILL FB 6 Redpfxjy Tkghe Amuju (dengan penggaris digital X, Y, Z) Mesin frais alat dengan 18 kecepatan spindle dari 63-3150 rpm, 18 pemberian makan pada sumbu X, Y, Z, akepatan mesin alat sesuai DIN 8615, panjang sumbu X/Y/Z: 700/500/500 mm, daya 5,5 kW (100% siklus kerja), penguncian alat secara hidrolik, penerimaan alat DIN 69871 SK 40, koneksi listrik 400/50/3, termasuk penggaris Heidenhain pada X/Y/Z, mesin sesuai CE, tanpa penahan balik, dengan pelindung area kerja. Diproduksi sesuai ISO9001: 1994 Tahun: 2005 F4UT3901

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, EMCOMAT_14_D Rsdpey Tichefx Amuou

Kondisi: bekas, berat muatan maksimum: 700 kg, berat keseluruhan: 2.350 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 09/2022, lebar total: 2.150 mm, tinggi total: 2.550 mm,

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, Panjang penutup lipat: maks. 3000 mm Lebar penutup lipat: maks. 700 mm Tekanan vertikal dapat diatur: hingga 8000 kg Rsdexuf Dzjpfx Amuou Tekanan horizontal: 2500 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, SPESIFIKASI LINI Mesin Las 4 Kepala FUSION 4H Unit pelepasan bingkai Modul frais pertama Q-MATIC 1 Rodpfx Amoy S E E Nsusu Koneksi serial antara mesin las dan pembersih Meja pemutar Mesin pembersih elektronik TRIMMER 4A Meja ekstraksi Modul frais kedua Q-MATIC 2 Laptop pengawas lini Unit pemotong sisa Unit pelepasan bingkai otomatis

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Pusat kerja sudut untuk kusen "SCM" model WINDOR 60 Rsdpfx Amszacx Uousu Mesin masih beroperasi, dapat dilihat di bengkel tukang kayu. Tersedia selama belum terjual.

Kondisi: bekas, berat muatan maksimum: 1.540 kg, berat keseluruhan: 2.500 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 04/2021, Tahun pembuatan: 2021, Perlengkapan: ABS,

Kondisi: hampir baru (bekas), Eine große Menge fabrikneuer und unbenutzter Kugelgewindetriebe in hochwertiger Maschinenbauausführung zu verkaufen, alle originalverpackt. Sehr günstige Preise, kontaktieren Sie uns bei Interesse. Sie können die Spezifikationen beispielsweise mit Google AI anhand der unten angegebenen Referenznummern überprüfen. 1 Hiwin 423821003 645mm 2 NTN BS3212FF0852C3B 815mm 3 NSK W2803-651D-C3Z5 600mm 4 NTN BS3210FC1054C5B 1050mm 5 KOYO W2502-544Z-C3Z10 475mm 6 NSK W2803-440D-C3Z5 525mm 7 SUBAKI 31TIFC6-750C3 760mm 8 NSK W3608-182D-PZ10 1140mm 9 Unbekannt 1125mm 10 NSK W4004-116Z-C3Z8 840mm 11 NSK W2504-401Z-C5Z 700mm 12 NSK W3203-238D-C3Z 640mm 13 NSK W4005-248Z-C3Z8 840mm 14 KOYO 4010 TF(2.5) C51150H 1150mm 15 NSK W3608-182D-PZ 1130mm 16 NSK W3608-157-PZ10 1190mm 17 NSK NSK W3202-95Z-03Z 500mm 18 KOYO JG820 500mm 19 NSK W2802-117D-SPZ5 375mm 20 NSK W3606-211D-PZ10 900mm 21 NSK W4004-116Z-C3Z8 840mm Redpfoy Tlnajx Amuju 22 NSK W5008-254-C5Z10 1250mm 23 NSK W3206-1066D-C3Z10 950mm 24 NSK W3606-191D-PZ10 850mm 25 NSK W6324-20D-C5Z 3670mm 26 NSK W3620-30DE-PZ 2400mm 27 NSK 6334-6D 4650mm 28 NSK W6314-31D-C5Z 2680mm 29 NSK W3613-98D-C5Z 1800mm 30 NSK W5014-67D-C5Z 1800mm 31 NSK W3617-60D-C5Z 2230mm 32 NSK W3615-51DE-PZ10 2130mm 33 NSK W3615-51DE-PZ11 2130mm

Kondisi: bekas, Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 14100201-02, tegangan masuk: 400 V, ebavureuse_kmw_pvc Rodpjy U Ufkefx Amueu

Kondisi: baru, Lebar: 100 mm Panjang: sekitar 20 m Redpfx Amew Uig Uouju Timing belt meteran 100 mm cocok untuk gergaji Reinhardt.

Kondisi: hampir baru (bekas), jarak tempuh: 280 km, daya: 103 kW (140,04 hp), pendaftaran pertama: 05/2026, jenis bahan bakar: diesel, berat kosong: 2.950 kg, berat keseluruhan: 3.500 kg, bahan bakar: diesel, jumlah gigi: 6, jumlah tempat duduk: 2, panjang ruang muatan: 3.700 mm, lebar ruang muat: 2.200 mm, tinggi ruang muatan: 2.300 mm, Perlengkapan: ABS, EBS (Sistem Rem Elektronik), asisten tetap jalur, kantung udara, kendali jelajah, pendingin udara,