Beli Weinig Unimat 23 El bekas (478)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Weinig Unimat 500 Tahun pembuatan: 2008 Lebar penyerutan: 260 mm Tinggi penyerutan: 120 mm Panjang meja infeed: 2.500 mm Kecepatan umpan: 5 - 30 m/menit Motor umpan: 4 kW Pgodpexdm Tvefx Abuog Posisi otomatis pada spindle kiri dan atas Posisi spindle: Bawah 7,5 kW Kanan ) Kiri ) 11 kW Atas 11 kW Bawah 7,5 kW

Kondisi: sangat baik (bekas), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roll feed unit Planer moulder equipped with reinforced KASCHWIG three-sided sound insulation cabin • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed speed control (frequency regulated): 8 – 80 m/min • Feed motor: 18.5 KW • 1st bottom spindle: 11.0 KW • 2nd right spindle: 11.0 KW • 3rd left spindle: 11.0 KW • 4th right spindle: 11.0 KW • 5th left spindle: 11.0 KW Pgedpswvqklefx Abueg • 6th top spindle: 15.0 KW • 7th bottom spindle: 11.0 KW • 8th top spindle: 15.0 KW • 9th bottom spindle: 15.0 KW • 10th universal spindle: 11.0 KW (four-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindles equipped with NEW motor start/ brake combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven table rollers • Spindles 1 + 6 + 7 + 8 + 9 with counter bearing • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chrome plated table plates • Hard-chrome plated fences • Pneumatically assisted side pressure rollers • Automatic table lubrication • Centralised lubrication points • Freestanding control panel • Total connected load approx. 145 KW / approx. 400 A • Freestanding control cabinet • Operating manual, spare parts list and circuit diagram • Machine supplied without planing heads Machine dimensions approx.: • Length 6,000 mm • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 KG Factory-new WEINIG components installed: NEW horizontal / vertical spindles NEW counter bearings All spindles with HL bearing arrangement All motors newly fitted with bearings NEW electronic motor soft-start / brake units NEW hard-chrome plated table plates NEW hard-chrome plated fences Numerous additional NEW PARTS installed in the machine Condition: Refer to attached photos. Technically in excellent condition. Infeed mechanisation unrefurbished – complete parts – functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by prior arrangement Subject to prior sale and errors excepted.

Kondisi: bekas, Tahun pembuatan: 2007, from training workshop, public institution, chrome-plated stops and machine table used, excellent condition, low operating hours, top-spec equipment Manufacturer: Weinig Model: Unimat 300 Year of construction: 2007 Number of spindles: 5 Spindle arrangement: bottom-right-left-top-bottom Motor brakes Planing width approx. 20–230 mm Planing height approx. 8–160 mm Spindle diameter: 40 mm Table length approx. 2000 mm Pre-cutter Pneumatic feed rollers Protective hood Table lubrication with slip agent pump Pgjdpfx Asvwghkebuog Infeed ahead of the jointer Infinitely variable feed speed: 5–30 m/min Profiling diameter: 125–200 mm Electric thickness height adjustment Digital displays complete, including profiling Located at 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Kondisi: diremajakan ulang (bekas), Weinig moulder, model 22A Unimatic Working table width: 220 mm, with grooved table for short workpieces. Cardan shaft feed. Motor configuration and power ratings: Bottom spindle: 5.5 kW Pgedpfx Abeu Sr Ddsueg Right spindle: 5.5 kW Left automatic spindle (moveable spindle): 5.5 kW Right spindle: 5.5 kW Top spindle: 5.5 kW Bottom spindle: 5.5 kW Feed motor: 4 kW Hydraulic unit for the automatic left spindle: 0.9 kW The left moveable spindle adjusts automatically to the width of the inserted workpiece.

Tahun pembuatan: 1987, Kondisi: sangat baik (bekas), working width 170 mm planing height 120 mm table length 1950 mm 5 spindles: 1. bottom 2. right 3. left 4. top 5. universal feed speed 6.5 – 49 m/min Pedpfx Aolx Em Uobujgg feed via cardan shafts electrically raised pressure beam

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Four-side Planer Weinig Profimat 23E - German-made - Year of manufacture: 1995 - Right and left spindles equipped with end-milling cutters to ensure parallelism and 90° accuracy - Workpiece width measurement - Electronic width adjustment Podpoibq Nisfx Abuogg TECHNICAL PARAMETERS: Planing width: 230 mm Planing height: 120 mm Electronic control of planing width 1st (bottom) spindle: 4 kW 2nd (right) spindle: 4 kW 3rd (left) spindle: 4.2 kW (end milling) 4th (right) spindle: 4.2 kW (end milling) 5th (top) spindle: 7.5 kW Workpiece width measurement Electric adjustment of feed roller height Electric adjustment of top spindle height Spindle diameter: 40 mm Six upper steel rollers One upper rubber roller One driven infeed roller integrated in the table Pneumatic pressure system Feed via cardan shafts Infeed table length: 2470 mm Extraction port diameter: 140 mm Machine dimensions: 456 x 240 x 220 cm Weight: 4000 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Weinig Hydromat 23C dengan 6 spindle. Panel listrik terpisah. Sistem pelumasan otomatis untuk meja kerja. Dimensi maksimum 140mm x 230mm. No 1. 11kW – Bawah 6000rpm + bantalan luar – jointer lurus siap pakai. No 2. 11kW – Kanan 6000rpm – jointer lurus dan profil siap pakai. No 3. 11kW – Kiri 6000rpm – jointer lurus dan profil siap pakai. No 4. 15kW – Atas 6000rpm + bantalan luar – jointer siap pakai. No 5. 11kW – Atas 6000rpm + bantalan luar – jointer lurus. No 6. 18,5kW – Bawah 6000rpm + bantalan luar – jointer lurus. Tenaga feed 7,5 kW. 6–60 m/menit (kecepatan dapat ditingkatkan sesuai kebutuhan). Spindle 50mm. Motor pengangkut 0,55 kW. Dokumentasi lengkap termasuk. Dapat disediakan dengan pisau hidro jika dibutuhkan. Dapat disediakan dengan infeed dan outfeed jika diperlukan. Pgedpjycvd Aefx Abujg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 92552, lebar kerja: 230 mm, tinggi penyerutan: 120 mm, tinggi kerja: 120 mm, diameter spindel: 40 mm, daya motor pengumpan: 1.500 W, 🪚 2001 Weinig Quattromat 23P Vierseitenhobelmaschine – Industrielle Leistung in sehr gutem Zustand Ab sofort zum Verkauf: Eine Weinig Quattromat 23P aus dem Baujahr 2001, eine der zuverlässigsten und kompaktesten Vierseitenhobel- und Profiliermaschinen der Branche. Ideal für Betriebe, die Leisten, Profile, Fassadenverkleidungen, Zierleisten und mehr fertigen. Diese Maschine befindet sich in sehr gutem Zustand, ist voll funktionsfähig und optimal für Betriebe, die ihre Produktivität mit einer bewährten, in Europa gebauten Vierseitenhobelmaschine steigern möchten. ✅ Technische Daten – Weinig Quattromat 23P Baujahr: 2001 Zustand: Sehr gut – gepflegt und einsatzbereit Arbeitsbreite: 13 bis 230 mm Arbeitshöhe: 6 bis 120 mm Pgjdpfx Abswnr Eneujg Anzahl der Spindeln: 4 Spindeldurchmesser: 40 mm Spindeldrehzahl: 6.000 U/min Vorschubgeschwindigkeit: Variabel bis 20 m/min Leistung: ca. 21 kW Gesamtspindelleistung Einlauftisch: 1.800 mm Pneumatisches Drucksystem: Für konstanten Werkstückandruck Digitale Anzeigen: Für schnelle und präzise Spindelpositionierung Gerademotor: 4 - 7,5 kW (5,5 - 10 PS) Vertikale Spindeln: 5,5 - 11 kW (7,5 - 15 PS) Obere Spindel: 4 - 11 kW (5,5 - 15 PS) Vorschubmotor: 1,5 kW (2 PS) Spindeldrehzahl: 6.000 U/min Spindeldurchmesser: 40 mm Werkzeugkreisdurchmesser der Profilspindeln: 125 - 200 mm Verstellweg der Spindeln (axial): 30 mm Verstellweg der Richtspindel: 5 mm Vorschubgeschwindigkeit: 8 m/min Durchmesser der Vorschubwalzen: 140 mm Vorschubwalzenbreite: 2 x 50 mm Walzenbreite im Auslauftisch: 50 mm Verstellbereich des Richttisches und Anlauflinesals: 10 mm Höhe der rechten Anschläge: 60 mm Länge des Richttisches: 2 m Referenz-Gravurfräser: Ja Pneumatischer Anpressdruck für Vorschubwalzen: Ja Pneumatische Verstellung der Zuführwalze vor der 1. unteren Spindel: Ja Anpresswalze von oben und links vor Maschineneinlauf: Ja 🛠️ Maschinenfähigkeiten Vierseitige Bearbeitung für glatte und maßgenaue Werkstücke Profilieren (z.B. Nut-/Feder, Fasen, Nuten etc.) Serienfertigung von Komponenten für Fenster, Türen, Fassaden Kompakte Bauweise – ideal für kleinere Betriebe oder mobile Fertigungsstraßen Leichter Zugang zu den Spindeln, minimaler Rüstaufwand 📦 Im Lieferumfang enthalten Weinig Quattromat 23P Grundmaschine Absaugstutzen Original-Bedienungsanleitung und Dokumentation Vollständig geprüft, gewartet und sofort einsatzbereit 🪵 Ideal für: Tischlereien Holzrahmenbau-Betriebe Möbelhersteller Gartenhaus- und Zaunhersteller Bau- und Architekturprofilbetriebe 📍 Verfügbarkeit & Lieferung Die Maschine ist auf Lager und kann kurzfristig besichtigt und ausgeliefert werden. Lieferung nach Irland, Großbritannien und in ganz Europa möglich. 📞 Kontaktieren Sie uns gern Steigern Sie Ihre Holzbearbeitung mit dieser robusten und präzisen Weinig Quattromat 23P. Weinig Quattromat 23P gebraucht kaufen Gebrauchte Weinig Vierseitenhobelmaschine in sehr gutem Zustand Vierseitenhobel- und Profiliermaschine für Holz Industrielle Vierseitenhobelmaschine für Profilproduktion Kompakte Hobelmaschine für Kleinbetriebe Weinig Hobel- und Profiliermaschine Großbritannien / Irland / Europa Gebrauchtmaschinen Weinig für die Holzbearbeitung

Kondisi: baik (bekas), Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, Four-Side Planer / Moulder Unimat 22N, 7 Spindles Year of Manufacture: 1979 S/N: 286512746 Manufacturer: Weinig Germany Planing width: 220 mm Planing height: 120 mm 7 planing spindles: Planing table length: 2000 mm Spindle arrangement (working spindle speed 6,000 rpm): 1. Bottom, 4 kW 2. Left, 5.5 kW 3. Right, 7.5 kW 4. Left, 4 kW 5. Top, 7.5 kW Pgsdpfx Ajt Eu Htebusg 6. Bottom, 7.5 kW 7. Bottom, 4.0 kW Spindles 5, 6, and 7 with counter-bearing 3 rollers in the table (not driven) Spindle diameter: 40 mm Planer cutterblock diameter: 125 mm Planer cutterblock diameter: 100-180 mm Maximum diameter of milling spindles: 180 mm Cardan feed system Infinitely variable feed speed (frequency inverter) 6-36 m/min Manual Waxilit pump External dimensions: L 4500 mm x W 1600 mm x H 1700 mm Weight: 4,500 kg Includes 7 planing/cutter heads

Kondisi: baik (bekas), Tahun pembuatan: 1983, Fungsionalitas: berfungsi sepenuhnya, Four-sided planer / moulder Unimat 22A, 7 spindles Year of manufacture: 1983 S/N: 225-347 Manufacturer: Weinig Germany Planing width: 220 mm Planing height: 120 mm 7 planing spindles: Pgedorb D Dlspfx Abusg Surfacing table length: 2000 mm Spindle arrangement (working spindle speed: 6,000 rpm): 1. bottom, 4 kW 2. right, 3 kW 3. left, 4 kW 4. right, 4 kW 5. top, 7.5 kW 6. bottom, 4 kW 7. universal, 11 kW Powered smooth outfeed roller in the table Spindle diameter: 40 mm Cutter block diameter for surfacing spindle: 125 mm Cutter block diameter for surfacing spindle: 100-180 mm Maximum cutter block diameter for moulding spindles: 180 mm Cardan shaft feed Steplessly adjustable feed (frequency inverter) 6–36 m/min. Manual Waxilit pump External dimensions (L x W x H): 4000 mm x 1600 mm x 1700 mm Weight: 4,500 kg

Kondisi: baik (bekas), Tahun pembuatan: 2010, Keilzinkenfräser WEINIG NKT Doppel-Pack DP20 Sambungan finger joint industri – dirancang untuk presisi dan efisiensi tertinggi Spesifikasi teknis: Panjang masuk kayu: min. 130 mm | maks. 1000 mm Panjang keluar kayu: min. 3700 mm | maks. 7400 mm Penampang kayu: min. 20 x 40 mm | maks. 80 x 180 mm Diameter cutter: 370 mm Jenis finger: Vertikal / Horizontal, 10/11 finger, pitch 3,8 mm Aplikasi lem: 2 sisi, lem PVAC putih Daya terpasang: 80 kW Pgodpfx Aex Ti Rfobujg Catatan: Mesin saat ini dalam keadaan terurai dan tersedia di gudang kami. Kunjungan dapat dilakukan berdasarkan perjanjian jadwal terlebih dahulu. Cakupan pengiriman: WEINIG NKT Doppel-Pack DP20 termasuk unit kontrol Stasiun aplikasi lem terintegrasi untuk aplikasi dua sisi Manual pengoperasian & dokumentasi

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Lebar kerja 230 mm Tinggi kerja 160 mm Jumlah spindle 5 Pgsdpox Hzv Tefx Abusg Susunan spindle: 1. Bawah 15 kW 2. Kanan 11 kW 3. Kiri 11 kW 4. Atas 15 kW 5. Bawah 7,5 kW Kecepatan putar spindle 6000 rpm Diameter spindle 50 mm 3 rol penarik di meja kerja Kecepatan umpan diatur dengan inverter hingga 60 m/menit Umpan digerakkan dengan poros kardang Penekan pneumatik Dokumentasi teknis Dimensi mesin 300x180x170 cm Berat 3500 kg

Kondisi: sangat baik (bekas), de1 Pjdpfox N T Imsx Abujgg

Kondisi: bekas, Tahun pembuatan: 1997, Spezialwerkzeug-Einstelllehre-WEINIG-de Pgedpfx Absv Uchbeuog

Kondisi: bekas, de-hobel-kehlautomat-weinig-profimat23e Podpox Ecgujfx Abujgg

Kondisi: bekas, Tahun pembuatan: 1995, 5-unit pencetak Kapasitas 240 mm/125 mm Posisi digital Sistem ATS Pgedpfex A Dz Uox Abusg Pemegang alat ALU Pelumasan meja 380 V

Kondisi: sangat baik (bekas), Mesin ketam empat sisi Weinig Hydromat 23C Lebar kerja: 230 mm Tinggi kerja: 160 mm Jumlah spindle: 7 Konfigurasi spindle: 1. Bawah 15 kW 2. Kanan 7,5 kW 3. Kiri 7,5 kW 4. Atas 15 kW 5. Bawah 30 kW (ganda rip saw) 6. Bawah 7,5 kW (penopang hidrolik) 7. Atas 7,5 kW (penopang hidrolik) Kecepatan putar spindle: 6.000 rpm Diameter spindle: 50 mm 4 rol penggerak pada meja kerja Kecepatan pemajuan diatur dengan inverter hingga 36 m/menit Pemajuan didorong oleh poros kardang Penekan pneumatik Pjdpfx Aboxlcufjujgg Dokumentasi teknis

Kondisi: sangat baik (bekas), de1 Pgjdpjx Dq Rfjfx Abuog

Kondisi: bekas, Status pengaturan untuk Weinig Powerlock Pgjdoxga Ewjpfx Abusg

Kondisi: bekas, WEINIG profile spindles Pjdsq Tn Tuepfx Abujgg 1 pc, length 1100 mm 1 pc, length 650 mm 2 pcs, length 700 mm 2 pcs, length 900 mm

Kondisi: bekas, Status penyetelan untuk profil Weinig Powerlock Psdpfx Abjxga Eqjuogg

Kondisi: baik (bekas), Tahun pembuatan: 2006, de-1 Pgedpfxextxi Io Abujg

Kondisi: baik (bekas), Tahun pembuatan: 2005, de-4789672b Pjdpfxextxg He Abusgg

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 5 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely inspected prior to delivery ----- Technical Data Summary (additional accessories possibly included upon request) Pos. 1: Crosscut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment pneumatically controlled in 8 positions, e.g., for edge rounding from above > Laser alignment light for recognizing the saw section Pos. 2: Rounding Unit Horizontal Bottom ----- > Position: horizontal bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9000 rpm > Max. tool diameter: 130 mm > Axial adjustment mechanically coupled to crosscut saw > Radial adjustment pneumatically controlled on/off NC-controlled length stop ----- > Length: 3500 mm > Electronic length stop Pos. 3: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless, NC-controlled > Spindle speed: 3,500 rpm > Max. tool diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 4: 1st Profiling Spindle (climb and conventional milling) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 7.5 kW Pos. 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm Pgodevu Hghjpfx Abueg > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash bar guide consisting of: Guide fence on the stop (area of climb-cut spindle), Sash bar support rail from above in the area of vertical right profiling unit and profiling spindle. Pos. 6: Profiling/Milling Unit, Horizontal Top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment: 30 mm, 8 positions > Radial adjustment: 125 mm, 8 positions Pos. 7: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions > Radial adjustment: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool diameter: 210 mm > Motor power: 3.0 kW Pos. 8: Profiling/Grooving Unit from Below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and thoroughly checked prior to delivery Technical Data Summary (Please enquire regarding any additional included accessories) Pos. 1: Crosscut Saw ----- > Electronic, horizontally adjustable crosscut saw (stepless) > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for saw cut identification > NC length stop, mounted on slot table included Positioning of the crosscut saw integrated into the control system. > Length: 3500 mm Pos. 2: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st Profiling Spindle (Climb and Conventional Milling) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially controlled pneumatically, 2 positions Sash bar guide consisting of: Guide rail at the fence (climb-milling spindle area), Sash bar support from above in the area of the vertical right profile milling unit and profiling spindle. Pos. 5: Horizontal Top Profile Milling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Additional Features ----- > Online capable > Rebating unit for tear-free rebating > Double part clamping kit > Return feed device for one-person operation: swivel belt > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Weinig type manufacturing program > Supplied without machining tools No original images yet available. Photos show a similar machine from our archive ----- Price for the above machine on request! ----- Podpfxevu Hfqe Abusgg Option at extra charge: EUR 6,500.00 Note...